BI content and SAP Enterprise portal connection

Hello All,
i m new to SAP enterprise portal , can anyone explain me the connection of BI content and Enterprise Portal.Please explain me the flow of publishing the Bi reports to EP.
Thnks in advc.

HI Sonal,
For publishing BI reports in portal you  need to Integrate BI into Portal.
Please refer to SAP Notes:
916950
937697
They are very helpful.
Procedure for publishing after integrating BI with portal:
For this you need to create Roles-Worksets-Pages---Ivews.
The name of the report which you want to  be displayed in TLN you need to make a Role for that and the tab under that name you need to create worksets for that and the content of the report you need to create an ivew for that in this way your report will be displayed in portal also you need to righht click on the workset and <add workset to Role>and similarly for ivew also keeping entry point "YES" for a role is mandatory with the main report name in TLN and and the sub tabs under below it and the content indetailed navigation.
For publishing simply create a Role --workset and an ivew .
During creation of an ivew the wizard will ask you for a Query string that Query will be given to you by your BI people you just neeed to copy that query after ? mark and paste it in and then save it hence your report  is published in portal.
This is basically the proceddure for publishing BI reports in portal. You can ask any doubts if you hae in this.
Regards
Pooja
Edited by: Pooja Gehani on May 26, 2008 5:44 AM

Similar Messages

  • Integration of  Adobe Connect and SAP Enterprise Portal

    Hi All,
      Is it possible to integrate Adobe Connect with SAP Enterprise Portal?
    If so , how it can be done? Provide me with some details , links and materials.
    Regards,
    Eben.

    HI,
    Yes, this is Possible.  You can use AppIntegrator Iview and Pass the URL for your Adobe Connect.
    Thanks and Regards
    Puneet

  • Urgent help on sap XI and SAP enterprise portal integration

    Hello friends,
    This is an urgent requirement for sap xi integration with sap enterprise portal so can anyone help me by providing some demo on the same.
    Pls specify the components required in the scenario and steps required for configuring the setup.
    Any documents are welcome.
    My email id is [email protected]
    Points will surely be distributed for any document related to above scenario.
    Its urgent.................
    Regards,
    Ameet
    Message was edited by:
            Ameet Jassani

    Hi,
    In addition to the above post, check the following links...
    http://help.sap.com/saphelp_nw04s/helpdata/en/70/0837ced133304eba452c45b6047c74/content.htm
    /thread/143082 [original link is broken]
    /thread/126493 [original link is broken]
    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9974d3f7-0b01-0010-88ac-e4d9f15c9499
    regards

  • Business Object, SAP BW and SAP Enterprise Portal

    Hello all,
    I've a few questions about the possibility for linking Business Object, SAP BW and the SAP Enterprise Portal.
    The Business Package MSS 1.41 give us a functionality to display (in a federated portal) personalized Budget and costs in an Overview Iview (kind of Welcome page).
    Those information are retrieved from SAP BW and I'd like to know if it's possible to retrieve those data (with the same functionality) from Business Object tool.
    Is it possible to have those personalized reports without having a direct link (standard architecture) between SAP BW and the federated portal?
    Thank you in advance fro your answers.
    Matthieu

    Hi,
    The procedure to replicate BW users in BO is explained in detail on the blog of Ingo Hilgefort:
    /people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
    Regards,
    Dave

  • About SAP BW 3.5 and SAP Enterprise Portal Integrating

    I feature in the preview through BW webtemplate to preserve the iview feature, the system shows errors:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Cannot retrieve system 'BWDCLNT100' from UME.
    How to solve this problem?

    Hi,
    Have you defined and tested concerned BI system??
    Can you please elaborate how you went about creating this iview.
    Hope you have done as described in following help pages
    http://help.sap.com/saphelp_nw2004s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
    regards,
    Sudhir

  • SAP Enterprise Portal Binary Contents?

    Hello everyone,
    I was wondering if anyone can help answer this question regarding the contents of SAP Enterprise Portal. 
    How much of SAP EP contents  would you say are typically in binary format?
    thanks

    Hi,
    You didn't explain your requirement....
    any ways, here are the two PDFs which may help you....
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d06320a0-5f59-2a10-069c-b0880e147f99
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
    Regards,
    Srinivas.

  • Configure SSO Connection from SAP Enterprise Portal to BOE Server

    Hi Guys,
    We recently installed a BOE Server and want to connect it to our SAP Enterprise Portal. What we need is just to display the Crystal Reports via Enterprise Portal. We have set up the following:
    SAP EP with AD Authentication
    SAP EP configured with SNC to SAP BI7 system
    SAP BOE XI 3.1 - SAP Integration Kit
    BOE Server configured with SAP Authentication via SAP BI7 System
    We've also set up BOE IK iviews and URL iviews pointing to existing reports in BOE. However, when we access it from EP, it prompts for a username and login to BOE. Is there a way to configure these so that there is no prompt for login to BOE server and SSO is used? Is it also possible to have a service account (e.g. domain/crystal) that will run the reports in BOE everytime a user accesses a report from SAP EP?
    Let me know if this is at all possible

    Hi,
    You should configure InfoView for SSO first, which required infoview.xml file modification, using windows AD default authentication. If you want to utilize the OpenDocument URL for iView then you also need to configure OpenDocument.xml file for SSO also. The SAP portal must have trust relation with the SAP BW server so the Windows AD token can be authenticate with SAP BW server.
    If you want crystal user to run all the report then you will lose data security. It can be done by hard coding user name and password in the report properties and database logon but the SSO capability can be accomplished only by windows AD, SAP or LDAP.
    For more details check BOXI Admin guide and SAP Integration Guide.
    Thanks,
    Muhammad

  • SAP Enterprise portal "portal content" keeps on loading not opening

    SAP Enterprise portal portal content keeps on loading and not opening only in my system(computer).When I check the console for errors, I found the below error,
    SCRIPT5007: The value of the property 'loadXml' is null or undefined, not a Function object
    dynamicLoad.js, line 58 character 1
    Please let me know whether I need to change any settings related to browser or any other issue.

    Hi Venkatesh,
    Make sure the hostname you use in your URL (short and FQDN) can be resolved.
    ie:
    myportal:<port>/irj
    myportal.mycompany.com:<port>/irj
    eg: in your hosts file make sure
    10.23.2.50 myportal myportal.mycompany.com
    Also after all the changes you have made, empty your browser cache and also force a GET by using cntrl+F5 key.
    KR,
    Amerjit

  • Connect of 2 SAP BW systems to  one SAP Enterprise Portal

    Hi!
    I have 2 SAP BW systems that should be integrated into SAP Enterprise Portal.
    I currently have already one SAP system entry "SAP_BW" within SAP EP.
    Questions
    Is it possible to define second entry for second SAP BW system in order to use 2 SAP BW systems with one SAP EP in parallel?
    Where can I find appropriate documentation?
    Thank you very much!
    regards

    Hi,
    We have a pilot portal with BW DEV, QAS and PRD connected to it.  So it is possible.
    It may be more appropriate to post this in the portal forum to get expert advice.
    Mathew.

  • Is there User Group and Role Reporting in SAP Enterprise Portal?

    I want to know if there is a way to pull users statistics our of SAP Enterprise Portal like you can out of the R3 backend systems.
    I would like functionality similar to the SUIM transaction. I know through user administration you can access any user, even a list of all users, and you can do similar lists with roles and groups. You can then access any of these things individually and look at their assignments. However, I want to do this on a large scale. I want to know for example every group that has a user assigned to it. Evergroup that has roles assigned to it. Or groups that have no user or role assignments. We have approximately 1904 groups in our Production Portal system and I am trying to clean up the groups that have no user assignment, but I don't want to look through them one by one.

    Hi Chris,
    There is no standard report available for this purpose. However all this information is stored in table UME_STRINGS.
    You can write your own SQL queries to generate such reports. However please note that this table is not normalized, and it's a master UME table. You should use it strictly for READ ONLY purpose.
    For a sample code you which i wrote some time back, you might refer:
    http://forums.sdn.sap.com/thread.jspa?threadID=2088099&messageID=10859334#10859334
    Thanks
    Prashant

  • SAP Enterprise Portals and Webdynpro application development environment

    Hi,
    Is there a way to set up a Development environment for SAP Enterprise Portals and Webdynpro on a laptop/desktop without SAP-GUI.
    Any help/guidance will be truly appreciated.
    Thanks,
    Prasanna

    hi,
    can you look at this
    [http://www.sap-hefte.de/download/dateien/1000/075_leseprobe.pdf]
    [http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Tutorial_1.pdf]
    [http://www.sercononline.com/suntechnovate07/images/images/13%20-%20Rajiv%20Jain%20-%20SAP.pdf]
    Regards,
    Muralidhar

  • SAP Enterprise project connection and Primavera

    Hi, has anyone worked on interfacing SAP ECC and Primavera P6 using SAP EPC Add on. Need some guide on how to!!

    Hi,
    Instguide for epc 2.0 sp 04
    https://websmp106.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000094598&_SCENARIO=01100035870000000202&
    Rin Note:
    1993495 -
    RIN für SAP Enterprise Project Connection 2.0 mit Patch 04 für SP02
    PAM:
    https://websmp102.sap-ag.de/~sapidb/011000358700000103362012E
    br
    Julius

  • TEP15 SAP Enterprise Portal and KMC Development Book Required.

    Hi everyone....
    can someone please let me know where i can download book "<b>TEP15</b> - SAP Enterprise Portal and KMC Development" from?
    Its urgent please.
    Thanks in advance.
    Regards,
    Tejas

    See https://forums.sdn.sap.com/thread.jspa?threadID=398494

  • Integration of SAP enterprise portal with ATG dynamo platform

    This is more an architectural question.
    There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
    There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
    ATG 6.2 and above allows integration in 2 ways :
    1) Use web services
    2) Integration framework using JMS/RPC etc
    [Pl. see the ATG documentation www.atg.com/support]
    I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
    My theoretical understanding is:
    a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
    b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
    c) Are there any other options?
    I'm completely new to the SAP netweaver platform but have a good idea on SOA.
    Any help or inputs on this will be highly appreciated.

    Hello,
    I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
    Best Regards,
    Ran

  • Performance issue of BI reports in SAP Enterprise portal

    Dear Friends,
    We have  integrated BI reports with SAP Enterprise portal 7.0.Reports are running properly But the issue is reports are taking more time to dispsaly its content and leading it to  performance effect.
    In Bex ( BI side) reports  performance is little better than  SAP EP platform. BI Team also looking for ways to improve performance  at BI side.
    Could you please share your valuable ideas to improve  the performance at SAP EP side also ..
    Thanks and Regards
    Ratnakar Reddy

    Hi ratnakar,
    The first step is to identify which component is causing the performance problem. Run your report in the portal but try appending the string &PROFILING=X in the end of the URL. This will generate BI statistics which you can use to see which component (Java stack, ABAP stack, Database) is causing the performance issue.
    Hope this helps.

Maybe you are looking for

  • IBooks Author v. Keynote for digital timeline--URGENT

    I have been working on a digital timeline project that will be viewed on an ipad in a museum that a visitor can scroll through and also see on a large screen above the kiosk. I have gone back and forth on the best application to use for this project

  • Menu Widget: Text disappears when previewed in browser ?

    Hi All, I've created a site and have a top level page, with a sub-page. The site uses the Menu widget in Muse to create a menu with dropdowns for the sub-pages. However, when I preview the site in the browser, the state on the menu for the top-level

  • Replacing iMac SuperDrive

    My iMac G4 SuperDrive has been not been working for over a month now and it seems Apple have nothing to say on the subject, despite all the posts (see CDs/DVDs Not Reading At All http://discussions.info.apple.com/.689df994/103 - I'm in there somewher

  • DB Adapter Package call vs Pure SQL call

    Hi , We need to call few SQL select statements from BPEL via DB adapter. The SQL may fetch few thousands (1k to 50k possibly) records. We are now analyzing the possible pros and cons in terms of performance of DB Adapter package call vs direct pure S

  • Setting The checkbox in Screen (SE80) default to checked.

    Hi ! I would like to set the checkbox in my selection screen defaulted as checked from the screen element in SE80.Where do I mark it as checked in the Screen 9000 that I have in my report so that when I run my report , in my selection screen I get th