BI content/data source to get quantity in confirmation network

Hi All,
Please advice, is there any BI content to get quantity / daily progress from network activity in SAP R/3 . I found 0PS_NWA_EVA but it does not provide quantity for confirmations.
Please Advice.
Cheers,
Nies

You should create simple table/view datasource from table T077Y.
Hope it helps,
Alexander Kuzmich.

Similar Messages

Transporting Extract Structures for Business Content Data Sources

Hi
We have added a new field to the 2lis_13_vditm data source and when i am trying to capture it in the transport, only the data source is getting captured and not the extract sturcture. When I go to the Object Entry Directory of the Extract Structure, it shows package as MCEX and person responsible as SAP. Should i need to change this and capture it in a transport or is it enough if i capture the data source alone
Thanks
Rashmi.

Hi,
If you transport the DS that should do it . The extract structure is standarad one and it would show as SAP, however you would have added the new filed using an append structure and if you go to the append structure and view the transport request you should be ble to see the transport request and your package in it.
P.S : if the Append structure is not under any transport req then check if it has already been transported
Cheers!!
Ashwin G

Enhance business content Data Source

Hello BW Gurus,
Please let me know step-by-step (Detailed) procedure on how to enhance the Business Content Data source
Actual Time and Labor Times <b>0HR_PT_2</b>
http://help.sap.com/saphelp_nw04/helpdata/en/4b/26c5394dbfef35e10000000a11402f/frameset.htm
This Data source is already extracting Data for HR Tables PA2001,I want to enhance the data source to include start date and end date from the same table.
Please give me detailed steps how i can do it (Do i nned to modify the function module of data source if how how and where) .Please help as it is my first extraction from R/3
Thanks

Hi
Enhancement means in the SAP given datasource If you want to add extra fields.
The procedure is like below.
Take the datasource in which you enhance.
1. If you enhancing in the LO datasaource, take the aprapriate communication strucute append the structure in that structure add the fields you wnat enhance.
If you are enhancing other than LO you take extract structure append the structure and add the fields in that structure.
2. Goto LBWE Tcode take the option called "Maintain Extract structure" take the fields which you enhanced from pool take push in to extract strucure.
If you enhancing other than LO no need to do this.
3. Goto RSA6, take datasource, goto change mode. The enhanced fields Hide option checked, reomove that tick and save it.
4. Goto "CMODE" tcode, If project is already created for that enhancement goto disply mode. If the project is not created give the project name created and give the enhancemet name as "RSAP0001" and save it.
in the component you can find 4 Function modules
EXIT_SAPLRSAP_001 -> Transaction Data
EXIT_SAPLRSAP_002 -> masterdata attributes
EXIT_SAPLRSAP_003 -> Master data Texts
EXIT_SAPLRSAP_004 -> Masterdata Hirarchies.
Take the apprapriate FM and double click on it
there you can find Include name. If you double click on it you can find ABAP editor.
there we have to write the code
example code will be like below.
data: l_s_icctrcst like icctrcst,
l_s_icctract like icctract,
l_s_icctrsta like icctrsta,
l_tabix like sy-tabix.
case i_datasource. */ in BW 1.2B case i_isource.
when '0CO_OM_CCA_1'.
loop at c_t_data into l_s_icctrcst.
l_tabix = sy-tabix.
select single * from z0001 where kokrs = l_s_icctrcst-kok
and kostl = l_s_icctrcst-kostl.
if sy-subrc = 0.
l_s_icctrcst-zfield1 = z0001-zfield1.
l_s_icctrcst-zfield2 = z0001-zfield2.
modify c_t_data from l_s_icctrcst index l_tabix.
endif.
endloop.
when '0CO_OM_CCA_2'.
when '0CO_OM_CCA_3'.
when others.
exit.
endcase.
This is example code.
Thaks
DST

Standard business content Data source

Hi Experts,
Could you please let me know, which standard business content Data source will be suitable for the below business attributes?
Stock Transfer Order (STO) Number
STO Creation Date
Delivery Creation Date
STO required Date
Thanks,
Gana

Hi All,
Please let me know the business content extractor for the BFOK_A Table.
Thanks
Srinivas.

Business Content Objects on BI side for the business content data sources

Hi All,
We are doing a fresh implementation, and would like to know the step by step way through which i can know the relevant business content objects on BW side for a BC data sources ,,,,,
0material_attr
and 0mat_sales_Attrt
As Per my understanding, once installed the BC data sources, the data would be feed to the master data info object 0material
But the question is how do i know the complete Business content object on BW / BI side, and use the same building the entire flow.
I have a hint that we can know it through the help.sap.com, and it would be highly appreciated and awarded for your expertises guidence, i have tried sercing in it, but dont know the correct trick.
Even for the other business content data sources.
Example, the relevant infoobject or the DSO or the Cube,transformation, dtp,etc..
Thanks
Daljeet sing Nagi

Hi Vineeth,
Do you mean this way in the meta data repository, it will propose the flow for the business content object, and if yes, then even if they are in delivery version and not in active version, still it shall propose the flow for the business content objects,
And to cut short my requirement, as specified we are doing the fresh implementation,
and i have identified that we would require first to load the material master data, and based on our present requirement, the data source which i have identified are
0material_attr (for the table mara in ECC system)
0mat_sales_attr (for the table mvke in ECC system)
all the fields data would be loaded to which master data info object,
will it be 0material or ????
Thanks for your support and surly as promised

BI Content Data Source for 0ACCNT_GRPV Text Data

Hi Experts
(0ACCNT_GRPV)Vendor Account Group is a attribute of (0VENDOR) Vendor.
Could you please update me wether there is any content data source avaliable to load text data of (0ACCNT_GRPV)Vendor Account Group or atleast where i can check...to find it
Thanks in advance

You should create simple table/view datasource from table T077Y.
Hope it helps,
Alexander Kuzmich.

Underlying tables of business Content data sources

Hello Exerts,
Can anyone advice me finding the underlying tables of business Content data sources?
Regards.

Hi,
I dont think that there is any standard tcode or table to find out the underlying base tables.
But you can try the below mehtod to to find out the tables related to a datasource.
Go to RSA2 >>> give your Data source name and execute>>>>Double click on the extractor>>>Goto the function module Top include and see the list of tables used.
This might help.
Regards,
Abhishek

I Activate business content data source, but ca't able to see the data in

I activate business content data source in crm 2007 , when i go to RSA3, GIVE the data source and checking data, I can not able to find the data in that ,
q1) when activating the data souce then it have data i, OR we will run any sttings for that

Thanks for reply
I did same thing , I activated the data source in RSA5, then got to RSA3 i can not able to fine data in that data source,
is there is no data in tables?
or any other problem

BW-CRM - Business Content Data Source for Service Ticket

We are setting up BW for CRM. We want to analyze data related to Service Ticket. I am trying to find Business Content Data Sources for Service Ticket. I could not find any thing under Interaction Center Delivered analytics. I appreciate if any of you BW Experts can guide me in the right direction. Thanks for your help in advance. I am using RSA6 to look into delivered Data Sources

Hi Nilesh,
Thanks for the update.
I can enhance 0HRPOSITION_ATTR to include Number of hours per month & Number of Hours per Week (WKAVG & MOVAG).
My last question is which object (Employee,Position,Job) do i need to enhance
for PA0007: WOSTD( Hours per week) - It will be used to calculate STAFF FTE
Thanks for the help

How to get the BW 7.0 Business content data sources

Hi,
We have got following sever components
SAP EHP 1 for SAP NetWeaver 7.0
SAP_BW - 701 - SAPKW70106
BI_CONT 705
When we try to install the business content in T.Code: RSOR, we are getting 3.x data sources even though latest servers are in place.
Do we need to any settings in order to get 7.0 data sources and its flow(transformation and DTPs).
Please let me know.
Thanks,
Bala

SAP will not touch any of existing 3.x BW Content and change everything to 7.X content in the new BW Content version.
Most of the BW Content that was created earlier will still be in 3.x version only. You will see a small .(dot) before that object showing that it is in 3.x version.
SAP Provides only mechanism to migrate them into 7.X concepts as shown in below link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/f00e2696d24c5fe10000000a155369/frameset.htm
You can still use 3.x objects with out any problem.
In most implementations, the approach they use is, as long as you do not need to enhance or add any standard content, you can retain it the way it is. The enhancements include, adding a field, changing the structure of source or target, or you want to use better functionality in 7.x objects, then you can always migrate them as discussed in the above link
When you convert them, if you select "With exports" you can go back to older version later. If you select "Without exports" then the object is permanently transformed.
I you have to touch a standard object for any enhancement or reason, better convert it to 7.x version

Newly added field in the data Source not getting populated

Hello All,
We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
Please let mw know how to get the newly added field selected in the system generated query of the infoset.
Regards,
-Purnima

Hi,
As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
I hope it will help.
THanks,
S

Refresh data source view gets 'column' argument cannot be null

When I try to refresh a data source view in SQL Server 2008 BIDS, I get the error: System.Data 'column' argument cannot be null. Parameter name: column. How to resolve this? The underlying tables have no data yet.

Hi PCSQL66,
The error message should be caused by FOREIGN KEY constraint auto-generated. If you
add a FOREIGN KEY to the generated table, then you will see the error message after clicking refresh button. Please submit this issue to below official link and then post the link back here, I think we need to get confirmation from product group.
http://connect.microsoft.com/SQLServer
Thanks,
RaymondRaymond Li - MSFT

Data source for getting PM order cost.

Dear all,
I have created a DSO and used the data source 0PM_OM_OPA_1 - this is done to get a report which will give details of the planned and actual cost orderwise and with value category description.
I am only getting one cost when checked in the data in the target - how can i get both planned and actual cost in my report?
Experts suggestion will be highly appreciated.
Regards,
M.M

Hi,
the CO-Sources (and PM is similar there) deliver plan and actual costs in different rows separated with the characteristics 0VTYPE and 0VERSION (this one separating different versions of plan data) in your case you will get in your transactional data:
ServiceOrder   0VTYPE    SWG (i leave the rest of the keys and attributes out)
SO1000          20             15.000    for your plan date
SO1000          10             10.000    that are your actual data
so what wil happen if 0VTYPE is not a Key in your DSO is that first the plan record is updated in DSO and then the second actual record overwrites this value becaus both have the same key SO1000.
You have to define carefully what keys you use in DSO to avoid this. If you can try create a test-Cube on base of the DataSource fields and look how the data are displayed in there because a cube regards all fields as key's.
regards
Christoph

Data source not getting replicated

hi all,
i have created a generic datasourc and when i tried to replicate the datasource in BI, its not getting replicated at all.\
the datasource is active in rsa5.
I tried to replicate the application component but still the particulate datasource is not getting replicated.
I tried to store the data source in ECC in separate application component and try to replicate in Bi.,But still cannot replicate.
how to replicate the datasource?

Hi,
Please check if you r not replicating the daat source first time:
1. Delete teh PSA records if any.
2. Check if your replication trial create lock entry in daat base tables.
3. After deletion of whole datasource along with teh data , try replicating teh datasource again.
IF new datasource:
Go to rsa6 activate teh data source , check in RSa3 the extraction is proper.
log off from all teh sessions and of both BW and R/3 system.
Log in to BW and select teh r/3 system and replicate full data source.
Also check teh daat source RFC is activated and restored as well.
Thanks
Mukesh

Records Missed in PSA from R/3 for BI Content Data Sources

Hi Friends,
                      I'm extracting the data for the data target "0CCA_C11" using the data sources 0CO_OM_CCA_9 & 0CO_OM_CCA_1, but for the data source 0CO_OM_CCA_1, it is showing 25000 records in R/3 while checking in RSA3 transaction, but it's picking only 1500 records upto PSA, since PSA table is two dimension table, all records should be picked into the PSA, but it's not picking,
what might be the problem in R/3, can anybody tell me the step by step analysis for finding the exact problem?
Your inputs will be appreciated,
Balaji Reddy,

Hi Pinaki,
                Thanx for your replay, Can PI and BW versions and support package levels cause these kind of problems that not getting complete from datasource to PSA?, as far as this datasource is concerned, these are no filters and selections being set,
            help me in this regard in finding out the exact solutions
Regards,
Balaji Reddy

BI content/data source to get quantity in confirmation network

Similar Messages

Maybe you are looking for