Bi content- dataflow before and after

hi friends cud anyone plz send me any links xplaining dataflow before and after in bi content..in detail
thanks in advance

Hi,
Data flow before implies all steps or objects that are required to get data into the dataprovider for e.g. DTP,Infopackage,Transformation, Routines etc.
Data flow after implies all the objects that are used after data has been brought to the dataprovider e.g. Queries etc.
Assign Points if helpful.
Regards.

Similar Messages

In dataflow before and after wards

Hi all
in grouping i selected"in data flow before and after wards".
now can i select required objects while installing the DSO

hi krishna,
once u have selected "in data flow before and after wards" u need not select the objects manually.
all the relevant objects will be included automatically.
note: if the delivery content is already activated u can check this in the indicator near the object the signal will be green.
if ur content is already active and there are new pudates in sap delivery and if u dont want delete the existing active content u can perform a match.
match indicatior will by default is set if u want to install a new version of delivery.
reward points if help ful.

How can I control the space before and after text in a table

Hello
I have a series of icons with descriptions, these are lined up with icons on the top row and description text in the bottom row. Each icon and description is divided by a stapled line.
The text is of varying width, therefore the column width must also wary. However I would like to make the space before and after the text equal in all instances (See image).
If there is anyone that can tell me how to do this with tables or any other tools I would be very thankful.

The only way I can think of to maintain equla spacing between the text ov vartying lengths and the vertical lines is to put each icon/text pair in it's own frame fitted to content, make each vertical line a separate object, then select them all and distribute the spacing.

Can I control the spacing before and after a signature?

When using the Mail app, can I control the spacing before and after a signature? It seems like the app adds space, but it doesn't add the same amount every time.
Thanks.
Greg

The only way I can think of to maintain equla spacing between the text ov vartying lengths and the vertical lines is to put each icon/text pair in it's own frame fitted to content, make each vertical line a separate object, then select them all and distribute the spacing.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

GREP: How can I place a (for example) "*" before and after bold text with GREP?

Hi there.
I have a string of text as such:
I want to use GREP to insert a "*" (asterisk) before and after each bold part. Can I do that with GREP?
(if asterisk is a problem, I can use a different character)
Any help would be appreciated.

Hi Schmaltzkopf,
try this:
Have fun

What is the best app for before and after photos for my Mac?

I am looking for a program or app for my mac so i can put pictures up side by side.... like before and after photos. Any suggestions?

best cheap solutions.
acorn
https://itunes.apple.com/us/app/acorn-4-image-editor-for-humans/id634108295?mt=1 2
pixelmator
http://www.pixelmator.com/
Fotor (my fave) and FREE
https://itunes.apple.com/us/app/fotor-photo-editor/id503039729?mt=12
FXphoto studio
https://itunes.apple.com/us/app/fx-photo-studio-pro-effects/id312506856?mt=8

Hi, Just switched from CS6 to PS CC. I am used to using ACR in CS6 with it's preview checkbox in the upper right-hand corner. I do not see that checkbox in PS CC. I see that they have added side-by-side, right and left and top and bottom before and after

Hi,
Just switched from CS6 to PS CC. I am very comfortable using ACR in previous versions. I liked to use the preview checkbox located in the upper right-hand corner to see before and afters. That checkbox is no longer in my version of PS CC. I see that they have side-by-side, top and bottom and right and left before and after options in the lower right-hand corner in this version. Is there anyway to get that legacy preview checkbox back so that I can use it?

Hi Warunicorn,
Thank you very much. I just could not find it on my own. I will have more questions as I get into it.
Jim

Data Loading(Before and After Image)

I heard that a datasource which has both "Before and After Image " ,then the data can be sent directly to the infocube or from the DSO to the Infocube but where as
If a datasource supports after image then first it has to be loaded to the DSO and then to the Infocube ,
My question is how to know the image types of the datasource ?

Hi Ravi,
Check in ROOSOURCE tables in ECC. You can find the behvariaour options in DELTA field, so based on this table we can say will it support Cube/ODS.
    Delta Only Via Full Upload (ODS or InfoPackage Selection)
A    ALE Update Pointer (Master Data)
ABR    Complete Delta with Deletion Flag Via Delta Queue(Cube-Comp)
ABR1    Like Method 'ABR' But Serialization Only by Requests
ADD    Additive Extraction Via Extracto (e.g. LIS Info Structures)
ADDD    Like 'ADD' But Via Delta Queue (Cube-Compatible)
AIE    After-Images Via Extractor (FI-GL/AP/AR)
AIED    After-Images with Deletion Flag Via Extractor (FI-GL/AP/AR)
AIM    After-Images Via Delta Queue (e.g. FI-AP/AR)
AIMD    After-Images with Deletion Flag Via Delta Queue (e.g. BtB)
CUBE    InfoCube Extraction
D    Unspecific Delta Via Delta Queue (Not ODS-Compatible)
E    Unspecific Delta Via Extractor (Not ODS-Compatible)
FIL0    Delta Via File Import with After-Images
FIL1    Delta Via File Import with Delta Images
NEWD    Only New Records (Inserts) Via Delta Queue (Cube-Compatible)
NEWE    Only New Records (Inserts) Via Extractor (Cube-Compatible)
O
ODS    ODS Extraction
X    Delta Unspecified (Do Not Use!)

Repairing permissions before and after updating software

What is the reason to repair permissions before and after updating software? This may sound like a stupid question to many of you, but I am new to computers and I am trying to learn how and why of some of the things of my PowerBook. I installed some updates without repairing permissions. Did I install some software updates the wrong way? Thank you.

This is a topic which will draw as many emphatic for and against responses as overnight shut down or not, defrag or not, optimise or not, and so on.
I agree with Neil. I believe that OS X has progressed sufficiently that repair permissions has become redundant and so I do not do it on any regular basis.
Some folk may refer you to an Apple Support Article 303602. That Article in its 4 May 2006 version, titled "Top 10 Tips to Keep Your Mac in Top Form" suggested Repair Permissions should be done "after upgrading or installing new software". The Article was however revised on 15 May 2006 to be titled "Top Tips to Keep Your Mac in Top Form" and the item on Repair Permissions [along with two other recommended maintenance tips] was removed. It is my view that the conclusion to be drawn here is that Apple no longer considers Repair Permissions to be a required maintenance procedure.
Many users have adopted a "Repair Permissions" mantra for a cure-all over several years. I dropped it sometime in 10.3.
But, to each his own.
HTH
TiPB 867 Mac OS X (10.4.6)

How do I create a form that will give a report that summarises before and after data on the same graph?

I have a number questions that I want to know the average of all the before and after data to compare them, how do I set this up in a form in FormsCentral? Here is an example of what I want to do - the green bar is "before" and blue is "after"

This isn't something that you can set up in FormsCentral. It's possible to something similar with a form you create in Acrobat and use with FormsCentral, but there is no sort of built-in graphing control. The bar graph could be implemented with some JavaScript that controls annotations or fields (buttons) and perhaps some text fields.

Date - before and after precision?

Hi all,
I have two date objects and I am using the before and after methods for a decision process. I would like to know the precision of the above methods. Is the prevision at the seconds, milliseconds, or nanoseconds level?
Any help is appreciated.
Thanks
Saravanan

What does this have to do with JDBC?
java.util.Date uses milliseconds.
java.sql.Data uses nanoseconds (which isn't going to matter unless something actually sets those.)

Compare BEFORE and AFTER image in replicat

Do any of You experts know how to make the following code smaller?
...,p_kolonner=@STRCAT("ID='",@IF(@COLTEST(BEFORE.ID,PRESENT),BEFORE.ID,""),"'>'",@IF(@COLTEST(ID,PRESENT),ID,""),"'¤",
"OBSOLETED_ON='",@IF(@COLTEST(BEFORE.OBSOLETED_ON,PRESENT),BEFORE.OBSOLETED_ON,""),"'>'",@IF(@COLTEST(OBSOLETED_ON,PRESENT),OBSOLETED_ON,""),"'¤",
"SMRT_ID='",@IF(@COLTEST(BEFORE...The actual parameter would look like:
P_KOLONNER: ID=''>'11531'¤OBSOLETED_ON=''>''¤SMRT_ID=''>'1'¤SM_SMID=''>'2011X0074-00'¤SMT_ID=''>''...
This code is part of the params section of a sqlexec in a replicat file where I want to concatenate before and after images of a table into one parameter. I have to replace all NULLs with '' or the whole string evaluates to NULL when one of the columns are NULL. I have a procedure receiving the parameter.
How do I write this code shorter? I have to use less code to accomplish the same thing.

Hi Yosemite:
You're right, the correct term is "Key Fields", in the previous post I made a mistake when referring to it as "Key Part", I'm sorry for the confusion.
Anyway, it is not clear to me if you managed to solve the problem or if you're still struggling with your data loads, if this is the case, Could you please elaborate?
-Which is the data source you are working with?
-Did you map the ROCANCEL field both to the 0STORNO and 0RECORDMODE InfoObjects?
-Are you using Addition or Overwrite on the Update Rules/Transformation Rules to the DSO?
-Have you applied any relevant SAP Note to fix this issue?
In case you have not read the blog by Swapna Gollakota, take a look at it, you might find it useful.
How does a datasource communicates "DELTA" with BW?
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
Regards,
Francisco Milán.
Edited by: Francisco Milan on Oct 29, 2010 12:31 PM

Bi content- dataflow before and after

Similar Messages

Maybe you are looking for