BI Content extractor for table LFB1?
HI folks,
I'd happy to know if there is any BI content extractor which is able to extract the LFB1 table contents to BW.
I know there is 0VENDOR_ATTR but it only seems to deal with the "standard" vendor data (like is in table LFA1).
In fact, we are especially looking for the field ALTKN which is stored in the LFB1 table.
Best regards,
bivision
Hi,
If the field is not there in that datasource try to enhance to the datasource.
Similar Messages
-
What is the Business Content Extractor for HRP1000-OBJID ?????
Hi all,
I want to extract the HRP1000-OBJID, HRP1000-SHORT, HRP1000-STEXT from
R/3 in to BW. The table name is HRP1000 (Info Type 1000 DB Table).
What is the Business Content Extractor for these fields, please ?
Thanks in advance.
Best regards.There are a lot of datasource based on that table; chack this link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e2/72ee3da7138e5be10000000a114084/frameset.htm
Hope it helps.
Regards -
Hi:
Please let me know if we have a BI Content extractor for EORD ( Purchasing Source List ) .
Thanks.I would like to have the vendor field from this table.
The extractor 2LIS_03_BF already has been implemented and it contains a vendore field as well.
I am really not sure if this field is good enough as when I contacted one of the MM consultants he has asked me to pick up the same from EORD.
I will have to either find out if there are any standard extractors on this table or I will be left with enhancing the BF extractor. Enhancing will again force me to do a re-init of the entire data if I want to have the historical data for the added field.
Awaiting for some suggestions on this!
Thanks -
Hello Experts,
I am looking for a BC-extractor for table COBRB containingt hese fields:
OBJNR, BUREG, LFDNR, PERBZ, URZUO, GABJA, GABPE, GBISJ, GBISP, PROZS, AVORG, KONTY, KOKRS, BUKRS, HKONT, NLN1, ANLN2, MATNR, REC_OBJNR1.
Any idea?
We need the relation between COORDER and the valid HKONT for a certain moment.
As it is possible to have more than 1 HKONT (with different percentages and in time) I guess it is a different extractor than 0COORDER_ATTR and it can not just added to this ectractor.
Thanks in advance,
UdoHi,
Enter your table name in SE11 in ECC.
Click Where-Used-List
Select Structures, Programs etc., then it will show the entire info.
Regards,
Suman -
Hi ,
I wanted to know the extractor for table BKPF . Where can i know or which is the extratcor
Regards
Ankit VaishHi,
I hope, The datasource 0FI_GL_4 would be useful to you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P -
Unable to find, Business Content Extractors for PS Module in RSA5
Hi All,
I'm unable to find the standard Business Content Extractors for PS module in RSA5.
Like : 0CO_OM_WBS_1, 0CO_OM_WBS_2, 0CO_OM_WBS_6, 0CO_OM_WBS_8.
Is anything to be installed?
Sorry.. these datasources are present in different module ' Overhead Projects '.
Apologies.
Thank you,
Ketan Zare
Edited by: ketan zare on Jan 6, 2011 9:37 AMHi Ketan,
Check these DatasSource. Might be of some use.
0CO_OM_NAE_1 Network Activity Element: Costs
0CO_OM_NAE_2 Delta extraction: Activity Elements Actual costs
0CO_OM_NAE_3 Network Activity Element: Commitmt Line Items
0CO_OM_NTW_1 Network plan: Costs
0CO_OM_NTW_2 Delta Extraction: Networks Actual Costs
0CO_OM_NTW_3 Network Header: Commitmt Line Items
0CO_OM_NWA_1 Network Activity: Costs
0CO_OM_NWA_2 Delta extraction: Netw. Activity Actual Costs
0CO_OM_NWA_3 Network Activity: Commitmt Line Items
0CO_OM_WBS_1 WBS elements: Costs
0CO_OM_WBS_2 WBS elements: Budget
0CO_OM_WBS_3 WBS elements: Overall plan
0CO_OM_WBS_4 WBS elements: Statistical key figures
0CO_OM_WBS_5 WBS Elements: Selections
0CO_OM_WBS_6 WBS Elements: Actual Costs Using Delta Extraction
0CO_OM_WBS_7 WBS Elements: Commitment Line Items
0CO_OM_WBS_8 WBS Elements: Budget Line Items
Roy -
Can someone help me in finding the sap std extractor for the table EQKT (Equipment short texts table). I need to extract the info from the field EQKTU.
-TagzKrishna,
To the best of my knowledge there is no standard delivered extractor for table EQBS. Try and understand the functionality of the data stored in the table and its relationships to what is specified in requirement. Is the field required in the master data of equipment or some other transaction data? Depending on the scenario you may have to enhance the master data / transaction data extractor or may be if situation warrants you may have to create a generic extractor.
General procedure employed in finding extractors is to know what type of data is requested, which functional area then check the standard extractors in that specific application component to see if any of the extractors delivered provide the data required. Check help documentation of the extractors. -
Hi,
Im looking for a standar extractor that can obtain the information that i have in the table s115 of R/3; or its necessary to create an extractor generic?
Thanks for the information
MónicaHi
just create a generic extractor for this table.
http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Reg's
Edan -
BI-Content Extractor for PS Partner roles?
Hi all
we are in need to extract PS Partner-roles.
As we could see, data is stored in IHPA and is referenced by the obj-id out of 0PROJECT_ATTR.
So now the question: is there any BI-content-extractor available for extracting IHPA? Unfortunately, we couldn't find anyone so far.
Thansk & regards
bivisionhi
unfortunately, this is not bringing up the partner information.
As IHPA effectively is a PM table - is there any extractor out of this area for extracting data from this table?
best regards
bivision -
Business content extractors for FI-TR
Hello all,
I´ve got a requirement to extract data for FI-TR and the specific area is called "Liquidity Planner".
Someone told me that there is an especific standard extractor for this, but I can´t find it in business content.
Could anybody tell me where I could find it?
Thanks in advance.
CarmenI can find anything extracting from this table; to find standard datasource go to http://help.sap.com/ and serch with the namo of the table; than, on the right side there are the object finded; choose datasource and look if are right for your use.
Hope it help.
Regards -
Business Content Extractor for SAP Controlling ?
Hi all,
I would like to know if there is an existing Business Content Extractor's for SAP BW for CONTROLLING - INTERNAL ORDERS.
What I need to be available from SAP R/3 can be accessible via :-
SAP R/3 -> Accounting -> Controlling -> Internal Orders -> Information Systems -> Reports for Internal Orders -> Line Item -> "KOB4 : Orders: Budget Line Items "
Thanking very much for your guideHi,
Check this site:
http://help.sap.com/saphelp_nw04s/helpdata/en/10/abab39fda7b86ee10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P -
Hi Folks,
I have a requirement to determine the number of PO's that are transmitted electronically (either FAX or EDI).
I know I use table NAST and Field KAPPL to determine a message type.
Does anyone know if there is a standard BC extractor for this NAST table?
Any advise is appreciated.
Regards,
DavidHi,
I hope, The datasource 0FI_GL_4 would be useful to you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
With rgds,
Anil Kumar Sharma .P -
hello all,
I am new to HR extraction.I need to pull the data of table PA2001 for absentism.
I seached all the extractors of std business content related to HR but i was not able to find it.
Any suggestions would be greatly appreciable.
Thanks in advance.
regards,
YogeshSee these links for mapping!
0HR_PT_1
http://help.sap.com/saphelp_bw30b/helpdata/en/0a/5266371849d666e10000009b38f8cf/frameset.htm
0HR_PT_2
http://help.sap.com/saphelp_bw30b/helpdata/en/56/3b6637bd367465e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/4b/26c5394dbfef35e10000000a11402f/frameset.htm
0HR_PT_3
http://help.sap.com/saphelp_bw30b/helpdata/en/d0/4566377c436c66e10000009b38f8cf/frameset.htm
TIME MANAGEMENT (general)
http://help.sap.com/saphelp_bw30b/helpdata/en/25/491d3c55a0f503e10000000a114084/frameset.htm -
Configuration for 0CO_PC_10 (new EHP4 content extractor for Product Costing
Has anyone tried to use new Prod Costing extractor 0CO_PC_10 that comes with ECC EHP4 upgrade?
THere seems to be some configuration or activation to be done in ECC via Transaction SFW5 .
SFW5 seems to be for activating business function sets, which seems to be a new ECC activity with EHP4 content.
When trying to use extractor 0CO_PC_10 in RSA3, we get an error "Errors occured during the extraction"
which implies something is not yet configured or activated ECC to support this extractor.
Likely a COPA configuration activity?
Appreciate any hints from anyone who has used extractor 0CO_PC_10 already?
warm regards, DavidHi,
Check the followig SAP Notes:
Note 1331090 - Extraction: "Errors occured during the Extraction"
Note 1439029 - SNP Extraction: "Errors occured during the Extraction"
Note 1386279 - More precise error message when reading data (2)
Note 1409789 - More precise error message when reading data (3)
Note 720486 - Extraction:Error in the generated program by the BW Adapter
Thanks
Reddy -
How to activate business content extractor for masterdata in ECC 6.0?
Hi Experts,
I have a small problem with the extracttor 0PS_RESPNO_TEXT in ECC 6.0?
If i try to open it in RSA2 / RSA6, it says that active version not available. When i check in the developement system, i have it as modified version.
For this problem, I hope activating this in Development and transporting to Prodction should fix.
As far as i know, activation of sap delivered extractors can be done through SBIW or RSA5. But i have not done this before.
Can anybody please help me with step by step procedure to activate this and also what are the precautions and checks that need to be preformed?
Thanks & Regards,
Asrar Ahamed MAIt depends on which BW environment has an RFC connection to the ECC environment you're activating the DataSource in. Typically, environments are paired, similar (but not always) like the depiction below:
ECC Development <-> BW Development
ECC QA <-> BW QA
ECC Production <-> BW Production
Best Practices suggest that a DataSource be activated and put on a transport in the ECC Development environment. Upon activation of the DataSource in ECC Development, replication of the DataSource in the BW Development environment can take place and Best Practices suggest putting the DataSource on a transport in BW. As the ECC transport is promoted throughout the ECC landscape, the BW transport is promoted throughout the BW landscape in order to keep them in sync.
So, if the envrionment that you've just activated the DataSource has an RFC connection to your BW Production environment, you can replicate in BW Production and if that's your standard practice, then that's the way your should do it. It's typically, however, not considered a Best Practice to be able to create, update or delete in a production environment.
Maybe you are looking for
-
Apple Singapore Keeps Canceling My iPhone 5 Order
Hi, Apple Online Singapore keeps canceling my order of iPhone 5 - a gift for my mom and dad for their anniversary (they are still using the 3G iphones.) The first one being I used my husband's credit card (we wanted the credit points for the purchase
-
Script to play itunes playlist on start?
I have just done the software upgrade to SL and now my old script doesnt work to auto play an itunes playlist on startup. I found the following script as a replacement but it doesnt seem to run automatically on start up. tell application "iTunes" a
-
Hi guys, I'm having a problem that has been bugging me for quite a while now. Whenever I print something from SAP, I get the background all black! Does anyone know a way around it? I don't know if its something from SAP or the printer, but it has onl
-
When opening my iTunes software on my Windox XP Professional OS PC everything shows ok, but the iTunes store, iTunes Match, Ping and Downloads does not show but a blank screen, I already unistalled and installed 5 times and still can't get a clear id
-
Quantum TV, no sound from sound bar
I have a harmon kardon SB16 sound bar, connected via fiber to my Sony W850B TV. I just got the new 6 show dvr, connected to the tv via hdmi. My Roku and BluRay play sound just fine, but the Verizon box gives me nothing. All cables are known working.