BI content for IS-U: 0UC_DEVICE mapped to EQUNR?

Hi all,
We're using the BI content data flow to load Device data from source tables EGERH and EGERS to the InfoObject 0UC_DEVICE. In this flow, the key field of both tables (EQUNR) is mapped to 0UC_DEVICE.
The InfoObject 0EQUIPMENT and accompanying BI content flow is used to extra all Equipment numbers from EQUI.
Now some questions have been raised about the mapping of EQUNR to 0UC_DEVICE, it is argued that is it's wrong to map an Equipment to a device, that this will lead to inconsitsenties in Master data reports using device.
However, as far as I know devices are a subset of the total collection of Equipments. Since they are extracted from another table than EQUI I don't see any problem with it.
Can anyone confirm that it's indeed valid to map EQUNR to device and/or does anyone have experience with inconsitent reports because of the use of this InfoObject?
Thanks in advance!
Regards,
Edwin
Edited by: Edwin Neuenschwander on Sep 17, 2009 11:21 AM

Hi Edwin,
I'm just doing the same thing - it's my understanding that this mapping should be ok. A meter reading device is an equipment. Can you be more specific as to what are the arguments speaking for eventual inconsistency?
Regards,
Marek

Similar Messages

XI Business content for MDM - Syntax error in IDOC adapter

Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
     <IDOC BEGIN="1">
     
          <EDI_DC40 SEGMENT="1"/>
          <xsl:apply-templates select="."/>
     </IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveen

Moorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen

PI mapping content for MM-SUS scenario?

Dear Guru's,
We are configuring MM-SUS scenario with SRM on 7.01 and ECC 6 ehp 5 and PI 7.02. While configuring the PI scenario for the above integration, we are not finding the required mapping for the purchase order output from the ECC side in the PI scenario.
We have imported XI Content for SRM SERVER 7.01, SAP APPL 6.05, SRM SERVER IC 7.01. Aprat from this any other XI content needs to be imported into PI SLD ?
For the interface PurchaseOrderERPRequest_Out_V1 from MM to SUS, do we required to do the PI mapping manually or any XI standard content is available. If so, please help me with the Content Details.
Thank you.
Ranjan

Dear Nikhil,
As suggested by you earlier, we have imported the content for the integration scenario 'SE_SERVICE_PROCUREMENT' and we have found all the required content. Only thing missing is the mapping for ERP PO REQUEST OUT in the PI content.
I am wondering whether SAP is not giving the standard content and we need to develop our own content for mapping or there is a direct call in place.
Anybody who has used the scenario, what was the approach? or is there anything we are missing?
Thanks and regards,
Ranjan
Ranjan Sutradhar

XI content for SRM and CCM scenario - mapping

Hi All,
We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
SAP SRM SERVER 5.5
CatalogUpdateNotification_Out
CatalogTransmission
http://sap.com/xi/EBP
SAP CATALOG CONT.MGMT. 2.0_700 ,
CatalogUpdateNotification_In
CatalogTransmission
http://sap.com/xi/CCM/CAT
Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
The service pack details are as follows:
PI 7.0 SP level 14
XI content
u2022 SAP BASIS 7.00 - SP 14
u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
u2022 SAP SRM SERVER 5.5 - SP 11
u2022 SAP ABA 7.00 - SP 14
Thanks,
Shravan

ditto, anybody received a response from SAP with regards to this problem?
As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
Regards, Kyle.
OK Received a response from SAP dated Oct. 9, 2008
I assume that you have installed NW 7.00 SP14 (or higher).
Within earlier versions the mapping from XML to ABAP was to lax.
The XML message was processed witout regarding the name of the root
element. This was fixed with SP14.
When you call an interface the XML message must match with the type
defined in the WSDL used for proxy generation.
Either the message or the WSDL used to generate the proxy seems to be
wrong here.
Here is a work around should solve this problem until we make available in a standard note soon.
I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
Disable the new check by adding the following entry in transaction sproxset
-Name: ST_USE_LAX_ON
-Value: X
-User: <empty>
-Inactive: <empty>
Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

CCM - content of customer characteristic not mapped to procurement catalog

Hi experts,
I uploaded a sample CSV-file supplier catalog. Within the supplier catalog I defined a customer characteristic of type /CCM/ATTACHMENT.
The supplier catalog is uploaded without any problems and also the /CCM/ATTACHMENT characteristic is filled correctly with description, mime type and URL.
I mapped now the supplier catalog to the master catalog and then to the procurement catalog.
All the content except the content of the customer characteristic /CCM/ATTACHMNENT is mapped to the master and procurement catalog. The characteristic /CCM/ATTACHMENT is available in the master and procurement catalog and I can even see the characteristic there. But no content is in there.
Are there any additional steps when I try to map customer characteristic? The characteristic is in definitely available in the master and procurement catalog schema and catalog.
Thanks in advance for your help! I will reward points.
Tom

Hi,
Try select both the characteristic in mapping, do "Assign Characteristics" for automatic characteristic assignment, include sub categories and SAVE.
A message will appear for assigning characteristic, then go for MAP CONTENT all items will be mapped and will be obtained in Procurement catalog.
Best Reg.,
Sridhar

Developement XI-Content for Enterprise Services

Hi,
What is XI-Content? And what must be defined in XI-Content for Enterprise Service Enabling?
We have defined some services as provider, these services are goint to be in XI-Content. But we are also requesting some infromation to business partner, these inforamtion could be services or messages in case our partner does not have services.
So my feeling is: in XI-Content we need to define:
Interfaces for the services which we provide;
Interfaces which we as consumer request?
Interfaces which from partner as provider?
Interfaces for the messages which are sending from partner?
Mapping between the service interfaces (provider <->consumer)
Mapping between the messages and the services?
I am sorry, but this is really confusing when we plan the development of XI-content.
Could you give me a clear picture or guideline according to your experience?
Thank you very much.
Jing

This XI content is nothing but most commonly used integration scenarios for address specific business process requirements for a particular landscape.For Ex:Interface for Creating PO ,Sales Order etc.
I have read many articles which say that XI Integration Repository will be re-named as Enterprise Service Repository which will enable the customers to kick-start with Enterprise Services.SAP sets the ball rolling by providing 500 Enterprise Services.
As far as I understand these services are nothing but commonly used re-usable integration scenarios which are powered by Webservices.Enterprise Service Granularity depends on how you define your "Service".
You have an awesome article on ESA which explains in an excellent way.
Search the sdn for Enterprise Service Design Guide which can be an answer all your questions.

XI Content for TM

Hello TM Experts,
I'm a PI developer and have recently a project for TM and ERP. According to SAP documentation, SAP has already delivered XI Content for TM (SAP TM IC 1.0). It is not easy to find this XI Content for a PI developer with 6 yearsu2019 experience. I imported this XI Content into PI ESR and tried to open a mapping program in this SWCV. But all of these great mapping programs told me that some message types could not be found. E.g. After opening the mapping program u201CSHIPPLTPSSHT01_to_TransportationOrderSCMCancellationRequestu201D under namespace http://sap.com/xi/TMS/Global/IC, the ESR shows a warning dialog box and says: Target message Message Type: TransportationOrderSCMCancellationRequest does not exist in software component version.
I suppose these message types must be defined in another XI Content package from SAP. So I downloaded all the XI Content SAP APPL 6.5 and imported them. But it didnu2019t help.
So the question/problem is where are these messages defined? In SCM?
Best regards
Xiang

XI content is available for integration between ERP and TM. You can integrate SAP TM with SAP ERP using IDocs. The IDocs are converted via XI interfaces to the corresponding Business Objects in SAP TM.
The integration relates to following transmissions -
- Deliveries in ERP to Transportation Request (Shipment Request) in TM
- Shipments in ERP to TM for Tendering purpose
- Freight orders in TM to shipments in ERP for execution purpose
Shailesh

XI Content for Business Partner

hi,
can anyone suggest what is the XI Content for Business Partner in CRM. i just need the exact name so that i can download it from the service marketplace.
thanks.
krishnan

Hi,
We have uploaded the XI Content for CRM Business Partner into the Repository. We are able to find the Message Type --> ABABusiness Partner.
How do I proceed further. Shall I copy this message type to my namespace and create Message Interfaces and proceed with mapping the source and target.
In that case, how will the function module BUPA_OUTBOUND_MAIN identify the message interface created in XI. I understand that there is some proxy code within the function module BUPA_OUTBOUND_MAIN. How this proxy calls the message interface which I have created in XI.
Krishnan

BI Content for HR: 0PY_C02 Doesnot have any Update Rules.

Hello,
I am trying to install the Busness Content for 0PY_C02 Infocube, but unable to find the SAP-delivered Update rules. Please let me know if there is any other option to install it.
Thanks,
SC

Hello,
For the cube 0PY_C02 and infosouce 0HR_PY_1, there is no longer
delivered 3.x transfer rules or update rules for this cube.
Therefore if you want to use transfer rules and updates rules,
you have to manually create them (the characteristics and key figures
should have a 1:1 mapping) in your system.
To create, please follow the steps below:
RSA1 > InfoProvider > Choose: 0PY_C02 > click with right button :
"context menu" and choose Adittional Functions > create update rules.
There is same issue on SDN network for reference
0PY_C02
Hope this helps
Best Regards
Barry

Setting the content type inside the ABAP mapping.

Hello All,
Can any one help me by telling me how to set the content-type inside ABAP mapping. I have searched a large no of blogs and help.sap.com for the same.
My requirement is I want to change the MIME type of the Main Document in side SXMB_MONI so that can change the content type of Main document which is application\xml by default.
I would appreciate an early response regarding the same.
Abinash

Hello Raj,
The output of my ABAP mapping is a flat file. So when I try to open the file with content type application/xml in the message monitor it shows the file has some error which is natural. The way to get around this problem is change the content type to application\txt from application\xml.
I am not finding an option to set the content type inside the ABAP mapping for the same.
Abinash

Filter doesn't work for filter-servlet name mapping

          Filter doesn't work for filter-servlet name mapping.
          it only works for filtering url-pattern.
          Does anybody has some idea?
          BTW, does anybody know if filter will be invoked when
          call RequestDispatcher.include/forward?
          Version: WLS6.1 SP1 on solaris.
          Thanks a lot.
          Heng


The Filter defined will only be run in the context that it is defined in. Since you are creating a new context, you will have to assign a new Filter. BTW, why not include the static content in the WAR with the dynamic stuff?

How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

How do we split our iCloud accounts but keep one iTunes account so we can share purchased content for our multiple iPhones and iPads?

You can migrate a copy of the data to a new account, then delete the other person's data from each account. To do this, on the phone that will be changing accounts, if you have any photos in photo stream that you want to keep on the phone, save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you have any synced notes that you want to keep on the phone, email these to yourself so you can create new notes in the new account.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account. You will create a new icloud email address with you turn Mail to On.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

Can we create an overarching Apple ID for discovery/managing/playing content for our pre-K kid?

I own several for work—and personal Apple devices and have been using one Apple ID to discover, manage and play content. This content consists of items that are (1) work based (2) personal based (3) family/child based (e.g. Monsters Ink).
I purchased an iPad Mini for my husband at Christmas, and he purchased an Apple TV for the family— and now we are perplexed at how to manage assets that are "family" based without purchasing them twice. Essentially want apps, movies and music related to our pre-K son on both of our devices. Otherwise managing this will quickly become a nightmare of who owns what on which decive.
Can anyone recommend how to do this?
Devices Self
MacBook Pro
iPhone 4S
iPad 2
MacBook Pro Retina
iPhone 5
iPad 2
Devices Shared
iPod
Apple TV
iPhone 3
Devices Husband
iPad Mini (husband)

An iDevce can containt content for multiple Apple ID's, there is no reason to purchase content multiple times.
There is no such thing as "sub" accounts.
Simply manage the content on the devices.

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?

How do I make a table of contents for a collection of six short stories that is after the legal page and NOT in the front on an unnumbered page?
When I first started I made a title page and then pasted in my first story from a .TXT file. After cleaning up I went back to the front a couple of empty lines ahead of the story and typed in the story title. Unlarged the font size and centered it, then

You can't do that. This is what the Pages User Guide, downloadable from your Pages Help menu, says:
Creating and Updating a Table of Contents
Each table of contents (TOC) you create using a Word Processing template lists only the content that follows it, up until the next table of contents. If you want a master table of contents for the entire document, it must be the only table of contents, and it must be at the beginning of the document.
You can do it manually though.

BI content for IS-U: 0UC_DEVICE mapped to EQUNR?

Similar Messages

Maybe you are looking for