BI content for SRM

Hello,
I would like to understand　Concept　of　BI content for SRM.
For some reason we cannot use BI.
【structure of the system】
BI7.0
SRM5.0(Decoupled Scenario)
ECC6.0
■transaction data(Decoupled Scenario)
How does BI eliminate crossover of documents and gather documents?
by　document number?product category?
■master data(Decoupled Scenario)
WHen we use master data for analysis, should I use master date of SRM?
In that case, should we copy the master data of ECC to SRM?
【Decoupled Scenario】
Master date and transaction date (by unit of record) exist in
1. ECC
2. SRM
3. ECC and SRM

NO migration of data from old to new model data.
I implemented the new model and reload the data into BW.

Similar Messages

Business System not reflecting the XI Content for SRM

Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.

Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven

Using XI Content for SRM 2007

Hi,
We are configuring a scenario for SRM which has following landscape
ECC <=> SAP PI <=> SRM
I am trying to use XI Content for SRM 7.0 and I have imported SAP SRM 7.0 Software component into ESR. But there are no Process Integration Scenarios which I can use to configure objects in Integration Directory using wizards. Also there are no IDoc imported in this SC and no mappings defined. Does that mean We have to create our own mappings? But this was not true when we used SRM 5.0 content.
I am not able to find any document which talks how to configure PI scenario using SRM 7.0 XI Content. Do let me know if there is any?
There is another thing which comes to my mind if SRM 7.0 XI Content is using web services instead of IDoc for communication with ECC system. If that is the case then i cannot find predefined proxy in ECC system and thus i have to create custom web service server proxy (where again i have to write custom code).
Do let me know if anybody has used XI Content SRM 2007. So that I can get some help on this.
Thanks,
Divyakumar

Hi Divya,
We have done with SRM 5.0 but not with SRM 7.0
When i see content for SRM 7.0 in Market Place i donot find , From where did u get download those XI content for SRM 7.0 ???
Did u find any Integration Scenarios depecting the flow , we used the same for the business flow.
Please do update how u have proceeded.
Thanks
rgds
srini

Where to download the standard content for SRM to import to PI 7.4

Hi experts:
i am implementing the MM-SUS by PI. My SRM is 7.03 and PI is 7.04.
i have not implement this before. When i configure the PI Integration repository ,it need to import the Standrad Content for SRM.
My question is where i can find the standard content to download, can anyone help me with more detail? thanks a lot!

user8683895 wrote:
Where to download the latest driver for X4447A-z?
Sun 4-port network card Interface:PCI-E x 8Are you restricting your search to "X4447A-z" ?
What happens when you search MOS for "X4447A"
or for "Sun 4-port network card Interface: PCI-Ex8" ?

XI content for SRM and CCM scenario - mapping

Hi All,
We are using the standard business content for integrating SRM with CCM to update contract information from SRM to CCM. Both SRM and CCM are on the same system.
The configuration scenario used is MasterDataInclusionInCatalogOnWAS700 which is in the name space SAP CATALOG CONT.MGMT. 2.0_700 , http://sap.com/xi/CCM/CAT.
There are 2 interfaces being referred by this scenario: CatalogUpdateNotification_Out and this CatalogUpdateNotification_In and both the interfaces are pointing to the same meesage type CatalogTransmission but they are in different name spaces.
Once the scenario was configured there was no interface mapping available in the standard business content to map the above 2 interfaces.
SAP SRM SERVER 5.5
CatalogUpdateNotification_Out
CatalogTransmission
http://sap.com/xi/EBP
SAP CATALOG CONT.MGMT. 2.0_700 ,
CatalogUpdateNotification_In
CatalogTransmission
http://sap.com/xi/CCM/CAT
Is this the normal case and we need to develop our own mapping or is the standard content not imported correctly?
The service pack details are as follows:
PI 7.0 SP level 14
XI content
u2022 SAP BASIS 7.00 - SP 14
u2022 SAP CATALOG CONT.MGMT. 2.0_700 - SP 12
u2022 SAP SRM SERVER 5.5 - SP 11
u2022 SAP ABA 7.00 - SP 14
Thanks,
Shravan

ditto, anybody received a response from SAP with regards to this problem?
As suggested above, we could build our own mapping in XI but this would obviously be a modification to SAP standard which we would prefer to avoid.
Regards, Kyle.
OK Received a response from SAP dated Oct. 9, 2008
I assume that you have installed NW 7.00 SP14 (or higher).
Within earlier versions the mapping from XML to ABAP was to lax.
The XML message was processed witout regarding the name of the root
element. This was fixed with SP14.
When you call an interface the XML message must match with the type
defined in the WSDL used for proxy generation.
Either the message or the WSDL used to generate the proxy seems to be
wrong here.
Here is a work around should solve this problem until we make available in a standard note soon.
I will do it internally to our development team but I am sorry that i can not tell now when the note will be ready.
Disable the new check by adding the following entry in transaction sproxset
-Name: ST_USE_LAX_ON
-Value: X
-User: <empty>
-Inactive: <empty>
Edited by: Kyle Freeman on Oct 9, 2008 5:54 PM

Business Content for SRM 5.0 in SP9

Hi All,
We have BI_CONT release 702 with Level 0005. But when I try to install the transformations or any new objects like DTP, I'm not able to find many of those in Business Contents. Are these objects not yet delivered with the standard content? Do anyone have any official information on this or any OSS Note? Any planned release dates?
Also any information on existing contnts for SRM 5.0
Thanks in advance
Amit

Hi,
But i know from the documentation of SRM 5.0 --> master Guide ---> It has been mentioned as follows
1) THE SRM 5.0 CONFIGURATION DOCUMENTATION IS DELIVERED WITH THE ST-ICO 150 CONTENT SHIPMENT FOR SOLUTION MANAGER
2) SOLUTION MANAGER CONTENT REPLACES THE BUSINESS SCENARIO CONFIGURATION GUIDES , WHICH WERE DELIVERED WITH EARLIER SRM SHIPMENTS
3) THE USE OF SOLUTION MANAGER IS MANDATORY FOR MYSAP SRM 5.0
4) if you have a look at the Master guide for SRM 5.0 ---> there is one seperate section available --->
1.2 Solution Manager ---> which gives more details of the solution manager and its content.
Edited by: khan voyalpad usman on Feb 12, 2008 7:49 PM

Change the standard XI content for SRM SUS scenario

Hello everyone,
I am implementing the "Plan driven procurement with supplier integration" scenario which integrates the SAP R/3 and SRM-SUS.
I have imported the standard XI content available on service market place for the scenario.
Now i have to modify the scenario. I have to add some additional fields in the inbound message for purchase order request.
The proxy classes for these interfaces were already created in the SRM system.
So now after changing the message type what all things i shd take care of e.g like creating the proxy newly etc.
Thanks and Regards
Rahul Nawale

Hi Shabarish,
Thanks for your reply, but i have a couple of more questions.
1.I can find a function module called from the method present in the proxy class generated.
METHOD ii_bbpx1_preq_request_in~execute_asynchronous.
CALL FUNCTION 'BBP_SAPXML1_EXTREQU_UPDATE_IN'
EXPORTING
is_purchreq_request = input.
ENDMETHOD.
so since i am changing the purchase order request do i have to do any changes in the function module as well.
In the function module Proxy Structures are mapped to the API Structures and then the API is called using BBP_API_EXTREQU_UPDATE function module.
Thanks and Regards
Rahul Nawale

SRM XI Content for Shopping Cart model (Extended Classic)

We've loaded the XI content for SRM (XI7_0_SRM_SERVER_7.xxxx) from the sap marketplace and reviewed the data types, messages, and interfaces. It appears there are no pre-built integration scenarios associated with a Shopping Cart model (Purchase Orders, Advance shipment notice, etc). Does a set of pre-built integration scenarios exist, or are these generally built manually? We are going to be pushing purchase orders from ECC to SUS in most of our scenarios. Thanks in advance.

Usually SAP provides the integration scenarios with template systems. But you can always create your own integration scenarios in your own SWC by making a dependency in SLD and using the Interfaces/Message Types and Datatypes in the SAP standard content.
VJ

XI content for SAP SRM SERVER 6.0

Hi All,
I want to implement SRM-MDM CATALOG Business scenario, but i am not getting the XI content for Software Component Version SAP SRM SERVER 6.0.
Can anybody tell me from where to get the XI content for Software Component Version SAP SRM SERVER 6.0.
Helpful answers will be rewarded.
Thanks,
Shiv

Hi Shiv,
You can get the XI contents for SRM Server 6.0 under this URL:
https://websmp107.sap-ag.de/swdc
Support Packages and Patches -> SAP Application Components -> SAP SRM (WITH SAP EBP) -> SAP SRM 6.0 -> Entry by Component -> XI Content
But for this, you requires a valid marketplace user-id and password.
But according to my understanding, you can use the XI contents for SRM MDM Catalog 1.0 under SAP SRM 5.0 also.
The file name is SRMMDMCAT1000_2-20001719.ZIP.
Thanks

PI mapping content for MM-SUS scenario?

Dear Guru's,
We are configuring MM-SUS scenario with SRM on 7.01 and ECC 6 ehp 5 and PI 7.02. While configuring the PI scenario for the above integration, we are not finding the required mapping for the purchase order output from the ECC side in the PI scenario.
We have imported XI Content for SRM SERVER 7.01, SAP APPL 6.05, SRM SERVER IC 7.01. Aprat from this any other XI content needs to be imported into PI SLD ?
For the interface PurchaseOrderERPRequest_Out_V1 from MM to SUS, do we required to do the PI mapping manually or any XI standard content is available. If so, please help me with the Content Details.
Thank you.
Ranjan

Dear Nikhil,
As suggested by you earlier, we have imported the content for the integration scenario 'SE_SERVICE_PROCUREMENT' and we have found all the required content. Only thing missing is the mapping for ERP PO REQUEST OUT in the PI content.
I am wondering whether SAP is not giving the standard content and we need to develop our own content for mapping or there is a direct call in place.
Anybody who has used the scenario, what was the approach? or is there anything we are missing?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Prompt for user id and password during transfer of BI content for install

Hi! I am trying to install the BI content for SRM. When I select the appropriate data source and transfer, the system will start the transfer and half way through will prompt me to enter the user id and password to the ECC backend system. It will continue the process once I keyed in the id and password. I also get a prompt to logon with user so that the system can check whether I am authorized in BW to transfer datasources into the source system from from the content. I usually reply OK and will have to key in the user id and password again. This time, it will be to the SRM system.
Any idea whether this is normal or is there something missing in the set up? I have checked the RFC connection and it can connect when I tested the connection via SM59. The ports are also working.
Appreciate any help on the above.
Cheers!
SF

Hello,
It is normal only..whenever you try to install Business content which involves the Transfer rules or datasource replicata then it will go to the source system and checks whether active version of Datasource is available or not..
Fiirst activate the datasource in Source system and then install the flow in BI/BW.
Hope it helps you..
Regards,
Srikanth

CCM for SRM

Hi ;
I wanted to know how i can look for CCM (Catalog content mgmt ) specific stuff on Xi content for SRM .I have downloaded XI content for SRM on Xi server from Service marketplace.
Thanks

If you go to the link http://service.sap.com/ibc , under .... for mySAP SRM, there's a link/section on "Catalog Content Management". You can probably find some of the functional informaton there.
Also, I'm sure there are others in this forum that actually have this content installed in their landscape. Perhaps, they can provide some input as well.
Regards,
Jin

Installing BI Content objects for SRM

Hi Experts,
I am new to this group and i need your help for installing Business Content Objects for SRM based data flow.
We are working for a BW - SRM upgrade project and as per our requirements we need to build 11 - BI standard reports based on Shopping Cart, Shopping Cart Approvar & Central contracts. We have identified the relevant data sources (0BBP_TD_SC_1, 0BBP_TD_SC_APPR_1 , 0BBP_TD_CONTR_2) info providers/ characteristics & keyfigures from help.sap.com respective with query details.
We have checked in BW system and do not found any objects under SRM info area (infoobjects/info providers). As a first step we have activated the above said data sources in SRM system through RSA5 and ensured the data avaialbility through extractor check in RSA3.
We have replicated the Meta data and got the data soruce in inactive version. We are planning to install the business content for info objects, info providers, query elements..
We need your suggestions on how to proceed further and what are the checks need to be done before installing the objects.
Can any one provide an step by step document for installing the business content objects from scratch.
Regards,
Saravanan.M

Hi,
Tty to install objects in below sequence.
1. Application component
2. Info area
3. Catalogs
4. Info objects - Chars and Key figs.
5. DSO/CUBEs
6. Transformations, info pack and DTPs.
7. Bex Reports
While isntalling obejcts from BI content, use grouping option as - only necessary objects , do the simulation and later install in background.
If any obejcts already in active then use Match copy option there itself.
From google you may find them,
Use google search key as "Business Content in SAP BI".
Thanks

Is there pre-configured message mapping for SRM Content?

Hi,
My requirement is to do a message mapping between the SRM Message "Purchase Order Request" and the R/3 Idoc Orders01. Is there a preconfigured message mapping in SRM content or will I have to do it?
I see the generated proxy class from the outbound message interfacePurchaseOrderRequest_Out which will carry the message to XI and my requirement is to map it to the Interface ORDRSP.Orders01 Please let me know if there is a pre-configured message mapping for this ? or is the message mapping between the message "Purchase Order Request" and the R/3 IDOC ORDERS01 to be done by the developer himself?

HI,
There are mappings available in the predelivered SRM content from SAP.
Did you import the SRM content into the repository? If so , you can find this.
www.service.sap.com/ibc -> Integrated Business Content for mySAP SRM->
Hope this helps,
Rgds,
Moorthy
Message was edited by:
Krishna Moorthy P

Workflow for SRM (contracts and purchase)

Hi Gurus..could you send me this documentation of Workflow
(configuration guide). I have to activate the N-Steps approval fo contracts and purchase order for SRM 5.0.
thanks,
Gustavo Nogueira

Hi,
See the foll links;
http://help.sap.com/saphelp_srm50/helpdata/en/8b/4fa9585db211d2b404006094b92d37/content.htm
http://help.sap.com/saphelp_srm40/helpdata/en/5a/c5173f5ff48443e10000000a114084/content.htm
http://help.sap.com/saphelp_srm40/helpdata/en/26/0f8b41ed891609e10000000a155106/content.htm
BR,
Disha.
Do reward points for useful answers.

BI content for SRM

Similar Messages

Maybe you are looking for