BI Content Install Different than Documentation

Hi, I installed InfoCube 0PCA_C01 from Business Content and noticed that the below InfoObjects are in the InfoCube, but not in the Documentation for InfoCube 0PCA_C01. I'm looking at recent documentation.
http://help.sap.com/saphelp_nw70/helpdata/EN/ff/686a373638445ce10000009b38f842/content.htm
Any ideas why these would be missing out of the documentation?
0PCOMP_CODE
0MOVE_TYPE

I always look at the SAP Help Portal with some skepticism because sometimes it omits certain things and sometimes it's just outright incorrect. As you've seen, this is a case of ommission and they have never corrected it.
Source --> Target
0EC_PCA_1-S_COMP_CODE --> 0PCA_C01-0PCOMP_CODE
0EC_PCA_1-RMVCT --> 0PCA_C01-0MOVE_TYPE

Similar Messages

OWSM 11g in EM behaving different than documentation

Hi everyone,
I'm trying to get OWSM 11g working so I just installed Soa suite 11gR1(11.1.1.2.0). All I need is to attach a predefined policy to an existing web service which exists incide an EJB in an EAR application. I'm following the instructions from http://download.oracle.com/docs/cd/E12839_01/web.1111/b32511/attaching.htm#CEGDGIHD , in the session "Viewing the Policies That are Attached to a Web Service". Unfortunately I'm expecting different screens than those shown in the Manual. In the documentation the figure 8.1 shows the tabs Operations / Policies / Chart / Configuration, but in my case the same screen shows only the operations Tab, making it impossible to attach the policies I need. Here's what I see at my environment: http://img203.imageshack.us/img203/751/erroowsm.png . I don't know if I missed something but it still not works as the documentation says (figure 8.1). Please, any help will be appretiated !
Thanks,

Rajesh wrote:
Is it going above 1GB ?No, current memory utilization is 503MB, but it keeps increasing. Support specialist told me it is OK for agents with large number of targets to utilize up to 1GB of memory even if I told him I have only 11 targets on this host. I do not think 11 targets is "large number" and I do not want to wait until agent will use 1GB of memory.
You can also check MOS note :
How To Effectively Investigate & Diagnose Grid Control Agent High Memory Utilization Issues? [ID 1092466.1]I have read this note and did not find solution for my problem and that is why I contacted Oracle Support. I think this agent is leaking memory, but Support specialist suggests reinstalling this agent on other host.
I do not think he understands problem and that is why I looking for other opinions.

Data in PSA content is different than the data source

Dear Experts,
I am using Process chain to update info cube from data source of a z table. In the process chain, the PSA request request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
But after executing the process chain, the info cube is not updated with the required data source. It is updated with data from some other data source which is belonging to a different custom table.
I have checked the Extraction of the data source in RSA3. This is extracting from correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the PSA content data is different from the data source.
I am totally confused, how this is possible. Can anybody advise me to troubleshoot and fix this issue.
Thanks and regards
Murugesan

Dear Igor,
The PSA request is being deleted in a previous step prior to loading the info package. I can see every time when I run the process chain, the old request number is deleted and a new request number is created.
Still the same issue is persisting.
I also observed one more thing that the second time when we repeat the same process chain, the correct data source data is loaded in the info cube and PSA table. Only during the first time, the PSA table and Info cube it is not updating with the right data.
thanks and regards
Murugesan

"include dataset" syntax functions differently than documented

Please reference http://docs.oracle.com/cd/E14812_01/doc/doc.103/e12838/dataset_lang.htm#CIHHCHBB
Running OSB 10.4.0.2.0 (did not find dataset language reference. Created a dataset directory and placed my two default datasets in it; one dataset for default includes, one for default excludes. If the datasets are referenced by name such as "include dataset directoryname/includes", backup works just fine. If referencing by the directory name, as shown in the documentation, such as "include dataset directoryname", the backups always fail with error "no data to backup described by dataset".
Doing a dataset check for the dataset using the includes reports no errors. Only error in the referenced datasets are " include host directive missing from dataset". Do note that the example in the documentation is also missing the host directive. The error appears to be a misnomer, as the backups will complete successfully, as mentioned above. However, referencing the directory name also produces no error during dataset check, but the backup will fail, as mentioned above.
Should I file a bug report? If so, where and how?

You're absolutely right! Yes this is a bug so I will open a bug for you and keep this post updated as there is progress.
Obviously you have the workaround, to create the dataset as :
include dataset richtest/includes.ds
include dataset richtest/excludes.ds
include host tvpbkp01
Thanks
Rich

2013 Date column content looks different than in 2010

Hi there - We have just test the migration from 2010 to 2013. We noticed that all the date columns whether OOTB or created by users. Here is how date used to be displayed in the Lists/Libraries in 2010
And here is how it appears in 2013
Not just time even the year also doesn't appear in 2013 when it is current year. Our QA users are saying its confusing for user.
Is there any farm wide setting that can change the format like the way it was in 2010?
Regards,
Khushi

Looking more closely at exactly what the problem is, you are not happy with the format of the default internal hidden "Modified" column.
There is only one way to do this globally, and that is:
http://blogs.msdn.com/b/joshuag/archive/2009/03/25/custom-date-formats-in-sharepoint-xsl.aspx
Not particularly easy, but workable. The only other alternative is to create a new site column that is a calculated value with the Date and Time format derived from [modified]. See a capture below with the Modified Date on the far right.
As a site column, this "friendly" version would be available throughout the collection. This would be helpful if combined with a Content Type.

Published content is different than what was designed in iWeb

I have saved some changes to my web site and now the published site shows pictures rearranged, dupicate pictures, and a picture where there should be text. the published site is www.gregoryzsmith.com and the page that is having problems is the Issues page. The screen shot attached is what has been designed in iWeb. I do not understand what happened here and cannot seem to get this straigntened out. Any assistance would be appreciated.
AKS

It seems to have worked itself out. Must have been a problem with the server. Thank you for your response.
Allison

Why is the contents of Safari's downloads folder different than the actual folder?

Why is the contents of Safari's downloads folder different than the actual folder that resides in my users folder?

Problem is if I delete that .plist I'll delete those downloads. I'm still able to launch those downloads from that location so that tells that file is probably not corrupted. I need to be able to located that folder and transfer the downloads from it before I do anything like this. So that begs the question, where is that folder located? When I do a folder search I'm taken to a Downloads folder, but it's not the one that is showing up from within Safari as it's contents are too different.

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? A lot of my preferre

PS CS6 has a different set of installed fonts than my old PS CS4. How do I get my old fonts back? Don't like most of the newer CS6 fonts. Dell Precision, Windows 7. Does PS use the fonts in the Windows directory or does it use its own? If so, where are they in the directory? A lot of my preferred fonts show in the Windows directory but not in Photoshop, which does not display them within the program. Please help. If I get free fonts (NOT CC fonts) from elsewhere, where do I put them for Photoshop[ CS6 to use them? Thanks.

All versions of Photoshop get their fonts from your OS. Just install any missing font wherever Windows keeps fonts.
I don't do windows myself.

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I a

I have just intalled PSElements 12 on a new PC with windows 8.1. It installed ok but when I open it up it displays different than on my windows 7 PC. The buttons and text are tiny and almosy impossible to see even when I drag it to full screen. How do I adjust it to look normal?

Hi Paul ,
It could be a compatibility issue as well as Acrobat 8 is an older version.
Do you get any error message while registering for the product?
Try repairing it and once and also check for updates as well.
Is it happening with all the word files or any specific one'?
Regards
Sukrit Dhingra
Acrobat 8 and Windows 7 Don't Work

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

Can I install more than one configurator profile

I want to develop 3 or maybe 4 layers of iPad iOS8 restrictions & Passcode rules.
For example ALL iPads will have enforced Passcode rules, but only SOME iPads ill require content filtering & SOME require Control centre in lock mode.
The actual working groups of iPads require a lot more complicated set of config elements - above is only an example.
I'd like to create & install different profiles & INSTALL MORE THAN ONE PROFILE.
I have tested this on a few iPads & it seems to work.
My question is - Is this the recommended way / is there a problem if i install more that one profile ?
Thanks in advance for any help.
Kind Regards
George kennedy.

We install many configuration profiles on each of our devices. We only use one payload per configuration profile so that we can be very granular with our configurations. What I don't know is what would happen if you installed 2 configuration profiles with conflicting restrictions (i.e. one configuration profile allows Messages, and another does not allow Messages). We just make sure we install only one restrictions configuration profile, and then a bunch of other configuration profiles (mail and calendar settings, web clips, WiFi profiles, etc) on each device.
Hope this helps!
~Joe

Customized setup for deployment of Firefox 4 : How to integrate addons & prefs (seems different than 3.6.x)

I'd like to silently install Firefox 4 using customized prefs, but it's seems different than the 3.6.x versions.
How does it work with the new "folder architecture" used in Firefox ?
* For 3.6.x, using the -ms switch install Firefox silently, and i integrated addons & prefs by :
- copying pref.js + localstore.rdf + mimeTypes.rdf + content-prefs.sqlite + bookmarks.html to "localized\defaults\profile".
- extracting all *.xpi addons into the extensions install folder "nonlocalized\extensions".
* For FF 4 the -ms still works, and i tried to copy my addons in "core\distribution\extensions\", but all of them do not install, and I don't see any "localized" or "profile" folder for the prefs..
Thx a lot in advance !

Hi guys, here are some informations that i found and combined. These preferences/customisations ARE TESTED and WORKING!!
First of all, extract your "Firefox Setup 4.0.exe"
'''Silent installation without desktop icon:'''
Create a "nodesktop.ini" at the same place you can find the setup.exe (root directory after extraction) containing following text:
[Install]
DesktopShortcut=false
'''Run''': Installationfolder\setup.exe -ms /INI="CompletePathToInstallationFolder\nodesktop.ini"
'''Disable Import Wizard:'''
Create: InstallationFolder\core\override.ini containing:
[XRE]
EnableProfileMigrator=false
Many options have to be set in InstallationsFolder\core\defaults\profile\prefs.js These directories and the prefs.js File have to be created first. Then make following entries:
'''Use wpad:'''
user_pref("network.proxy.autoconfig_url", "YourWpad.dat");
user_pref("network.proxy.type", 2);
'''Set startup homepage:'''
user_pref("browser.startup.homepage", "http://www.YourPage.com/");
'''Don't show browser rights:'''
user_pref("browser.rights.3.shown", true);
'''Don't ask if FF should be default browser:'''
user_pref("browser.shell.checkDefaultBrowser", false);
'''Dont't show FF welcome homepage at first run:'''
user_pref("startup.homepage_welcome_url", "");

ESSO PG on something different than MS AD

Is it possible to make PG (from 11.1.1.5.1 ESSO distro) functional on something different than MS AD, like ADAM? I deployed the ADAM, LM and PG (both client and server). LM works successfully and (after first sync) created ADAM nodes (of class vGOUserData) in OU=People,dc=domain,dc=local container. Keeping in mind that (in MS AD case) for PG to add user logon I should first manually create user and only after that use "Add New SSO User" link. So, I manually created two semi-empty nodes of class vGOUserData too ("semi-" - due to lack of data to put in very special attributes, including encrypted ones). After selecting "Manage SSO Users" - "Find User(s)" PG successfully shows me all created users (both from LM and manually created). But when I try to add new logons (no difference, for "LM" or "manual" user entries) PG shows me error message saying that "System.DirectoryServices.ActiveDirectory.ActiveDirectoryObjectNotFoundException: The local computer is not joined to a domain or the domain cannot be contacted". What's wrong with it (ADAM & PG are deployed on standalone Win2K3 Server)?

Update: seems that ESSO PG simply doesn't works on LDAP servers other than MS AD. It doesn't works at all. I tested it on ADAM and DSEE. Problems with ADAM are difficult to research, because traffic is protected via GSS-API, so I simply can't sniff network traffic as it encrypted. But as for DSEE, problems are described below:
Documentation (Oracle® Enterprise Single Sign-on Logon Manager Best Practices: Deploying ESSO-LM with an LDAP Directory Release 11.1.1.5.0 E21003-01) says about locator object: +"You must create the vGOLocator object at least at the same level as the container that holds user accounts. Ideally, vGOLocator should exist inside the directory’s user accounts container"+. So I created LDAP structure as shown below:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|---------(+)-ou=SSOConfig
As you can see, structure looks quite correct: vgoLocator "ideally exist inside the directory’s user accounts container", right?
Than I setup application templates, filled LM settings (via LM Administrative Console), wrote them into registry hive and published all those settings into LDAP (DSEE). It works correctly and LDAP structure now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator (created manually)
|---------(+)-ou=vgoLocator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator (created by LM while performing LDAP sync)
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1 (created by LM admin console while publishing settings into LDAP)
OK, now LM works perfectly, but we want to create centralized system, right? So I had to deploy PG. It was deployed and started. The first task was to correctly fill storage settings. I used values as shown below:
Storage Type: Oracle Directory Server Enterprise Edition
Server: esso.hq.domain.local:1389
Root DN: dc=domain,dc=local
User Path: ou=Users,dc=domain,dc=local
Connect as User: cn=Directory Manager
Password: **********
Use secure connection (SSL): no
Use configuration objects instead of application list: yes
Role/Group support: no
Configuration and role/group objects root DN: ou=SSOConfig,ou=ESSO,dc=domain,dc=local
Admin Group DN:
User PrePend: UID
Config looks OK, isn't it?
But when I tried so save settings, I got error "Cannot find any configuration objects". Metalink shows me two articles on this problem: 1305060.1 (says that i must not use space in Configuration and role/group objects root DN). Can you see any spaces in "ou=SSOConfig,ou=ESSO,dc=domain,dc=local" string? Next article was 1298762.1 that says that "This is because the container you have listed in the Storage Setting titled 'Configuration and role/group objects root DN:' does not contain any ESSO objects such as templates or password policies". But that container really contains ESSO objects (three, to be more precise), so that wasn't the solution too.
OK, let's look in depth... I installed wireshark and captured network traffic from PG to LDAP. There was four LDAP-related calls:
1. PG searches object ou=vgoLocator,dc=domain,dc=local. LDAP says "no such object" (of course, because we read documentation and created locator in "ideal" container - inside Users container). WHY? WHY it tries to find it there???
2. PG searches LDAP for dc=domain,dc=local. LDAP says "OK"
3. PG searches LDAP for ou=Users,dc=domain,dc=local. LDAP says "OK"
4. PG searches LDAP for ou=SSOConfig,ou=ESSO,dc=domain,dc=local. LDAP says "OK"
That's all. No more LDAP requests, PG simply throws an error as shown above.
"OK" - said me to myself, let's create locator at the position, where PG expects it to find, i.e. at ou=vgoLocator,dc=domain,dc=local. Wow! PG now accepts settings entered earlier and I almost become happy. LDAP now looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
So, let's play with users, yeah? Let's click on "Manage SSO Users" and have some fun? But PG tells me "Invalid storage settings" error... WTF??? OK, let's start network sniffer again and look, what's happened. Oh-oh... Wireshark shows me that PG tries to logon onto LDAP using credentials "UID=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" and LDAP declines authentication requests. BTW, ESSOPG\SVC_SSO is a local user, used (according to documentation, of course (looks like it's now my favorite phrase)) by IIS as anonymous user. WHY??? Why PG uses that user instead of "cn=Directory Manager", that I entered into storage settings five minutes earlier???
OK, if PG wants that user, let's create him in LDAP, yes? So I created such an user in LDAP and now it looks like that:
(+)-dc=domain,dc=local (Root context)
|---(+)-ou=Users
|---------(+)-uid=ESSO.Administrator
|---------(+)-uid=ESSOPG\SVC_SSO
|---(+)-ou=ESSO
|---------(+)-ou=People
|--------------(+)-cn=ESSO.Administrator
|---------(+)-ou=SSOConfig
|--------------(+)-ou=2c58e3b2-320a-4ed2-a708-90065620e5d1
|---(+)-ou=vgoLocator
Test with LDAP browser shows that I can access LDAP using that newly created user. Just one thing: according to LDAP rules, I have to use double slashes in logon name: "uid=ESSOPG\ \SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL". But PG doesn't know anything about such a rule and simply passes "uid=ESSOPG\SVC_SSO,OU=USERS,DC=DOMAIN,DC=LOCAL" (with one slash) to LDAP. LDAP declines auth request. What to do now? Eureka! Let's enter two slashes directly into PG settings! So, let's go to "Web Service Account" page and add one more slash into "User Name" field. Now it contains value "essopg\ \svc_SSO". Cursor moves to "Save" button, clicks on it....
PG shows me an error message: "Please enter the User Name in format "domain\userid".".....
I surrender. I have more than fifteen years experience in software development and information security, but I can't setup such a "simple" solution...
P.S. I asked local Oracle representative: "have you ever tried to deploy PG on non-MSAD LDAP?". He answered "NO, because it's a very common way - to use existing MS AD to store outside data". Very strange opininon:
1. MS AD are owned and supported by IT department
2. IT security projects, like E-SSO are pushed into company by Security department
3. 1 + 2 means that "The less impact the new solution will make on existing IT infrastructure (BTW, MS AD schema extension and storing outside data in it is a VERY big impact) - the easier the implementation process will be too". It's sad that Oracle doesn't understand such a simple thing
P.P.S. He also told me that "if something doesn't works, I should create SR". But there is some problem: in order to customer to buy ESSO and support (required to create SR's) I have to persuade him to use such a solution, right? Solution, that currently doesn't works? So, there's the only way remains: I have to buy SR's and create request on my behalf. But what must such an SR include? Phrase "Product doesn't works at all"? Oracle tries to get money several times for single work (once from me, because I have to buy SR in order to make Oracle's product work, and than from customer, who will buy the product itself)? Right?
P.P.P.S. Forum engine shows two slashes as line feed, so I had to insert space between them in order to show them correctly

How can I have a topic name different than the filename of a linked Word document?

I've encountered multiple issues with linking to Word files ...here's another one: If a Word document is entitled Feature_ABC, then upon generating the HTM after linking it, the HTM's filename and topic name are both Feature_ABC. As underscores are ugly in topic names and features can be renamed, I would hope that I could rename the topic to be different than the filename.
The Help documentation suggests this is possible by editing the Topic Name Pattern in the Word Conversion Settings dialog of Project Settings. However, reagardless of the Pattern entered, every time I generate or update from the context menu of a linked Word document the topic name remains the same as the filename.
Because the topic name is shown in the Search panel and browser tabs, it will be a little ugly and may even be confusing. It is possible to edit the HTML directly, but then the HTML is overwritten each time the Word documents are update and the great advantage of using linked documents is lost.
Is there a way to solve this problem?
Thanks in advance for any help you might be able to provide.

Thank you for your quick reply - just checked Multifox out.
It seems it still forces me to open a new window, while preventing the need for a new profile.
Why isn't it in the addons.mozilla.org ? Looks dangerous ...

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

I just upgraded to lion on my intel macbook. I would like to change my facetime alert to something different than a phone ring and, I would like to be able to have full screen. How do I do this?

Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

BI Content Install Different than Documentation

Similar Messages

Maybe you are looking for