BI Content Install Simulation Issue

Hi, I'm installing the technical content in BI 7.x SP15. When I simulate I get all kinds of errors in the infocube section saying InfoObject xxxx is not available in active version. But when I check the list of collected objects the infoobjects are in list to be installed. I tried the simulation in both list mode and hierarchy mode. think I should just ignore these messages?
Update:
It's only the Message window below that has the errors. The Collected Objects Window shows with a green checkmark that the simulation result is successful....
Thanks!

go through this links:
I think these links helpful to u
Problem in Installing BI Content
Error when Installing Business Content BW 3.5
Regards,
Lakshmi

Similar Messages

I've Downloaded twice ''Additional Contents'' but the issue is still unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)

I've Downloaded twice ''Additional Contents'' but the issue is still unresolved ( '' EXS 24 instrument ''steinway Piano.exs '' Audio file '' stw per v1 024.AIF '' not found)
Please Help

"Additional Contents" I don't even know what that is? What app is it for?

Business Content instalation & Transportation steps

Hi,
iam a new in Sap bi implementation project.so iam gettiong somany doubts abot Business Content instalation & Transportation
can you help me above concepts step by step,
Thanks,
chal

Please search the forum before posting a thread
Please do not post duplicate threads
Business Content instalation & Transportation steps

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there any e

I have recently purchased a refubished imac 3.06 ghz intel core 2 duo and I'm trying to install logic 7.2 on this machine. I get half way through the content install and it crash's . I have it installed on an older Imac and it works fine. Is there anybody out there that can help me figuire outhow to make this work?

See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information.

Business content installed.

how can one find out if the business content installed is 3.5 or 7.0?

Hi,
Check the following from your SAP GUI.
System > Status >SAP system data >
Browse SAP system data there you can see the version of installed Business Content.
Regards.

Business content -install n transport

hi ,
Can any one explain me Business content -install,transport, match(x) & Copy....
regards
Rashmi

Hi,
Install n Transport is option usually used to install the collected objects and automatically transfer.
All the Business content objects r by default in the D version .
we need to activate them to A version.
Match/copy option , if selected will not write the objects in the datadictionary if they r already activated . this will increase performance n save time . its always recommended to use , else for the first time.
Regards -- Kumar Sarvepalli /// honor points if helpful

SAP Content Server Connectivity issue

Hi Friends,
We have installed Content server 6.40 on a standalone server after the installation i tried to open below link but its not opening.
http://hostname:1090/ContentServer/ContentServer.dll?serverInfo
This content server has to be connected to R3(ECC 6 EHP4 ) hence we went to t codes OAC0 and OACT to create content repository
We have created a content repository as below
Content Rep.    ZDMS
Description     ZDMS
Document Area : DMS document management system
Storage type: 04 HTTP content server
Version no.     0046   Content Server version 4.6
HTTP server     192.168.30.12(where the content server is installed)
Port Number     1090                        SSL Port Number
HTTP Script     ContentServer/ContentServer.dll
Phys. path      D:\usr\sap\FNS\SYS\global\
and when i am checking i am getting below error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
i have also created a entry in table SDOKPROF
as below but still same issue.
NAME = USEHTTPPLG
VALUE = OFF
and also we have run RSHTTP05 to check if any error but no errors.
Even when we are going in t code CSADMIN we are getting same error
Error in HTTP Access: IF_HTTP_CLIENT->RECEIVE 1 ICM_HTTP_CONNECTION_FAILED
In dev_icm belwo error is showing.
** WARNING => Connection request from (2/3/0) to host: xxx.xxx.xx.xx, service: 1090 failed (NIECONN_REFUSED)
[Thr 5352] {000102ca} [icxxconn.c 2271]
Kindly help to solve this issue.
Thanks
Basis

Hi Deepak,
Thanks for your inputes i checked IIS and after the content server installation these website were not created hence i created it manully as per note 1823408 - Manual Creation of Website on Windows 2008 Server
I created SAP_Content_Server by following first 3 steps but after that 4 , 5 and 6 steps are not clear i dont see those option in ISS manger.
1. Go to Internet Information Services Manager from Start Menu >> Admintrative tools >> IIS manager
a) or Start Menu >> Run >> "Inetmgr"
2. Right Click on Sites >> "Add Website" to create a new Website.
a) Site name <Name of the webiste>
b) port <Port No>
c) Physical Path <path of the Content Server installation directory>
d) Application Pool >> Select "DefaultAppPool"
e) Click "OK"
f) Website will be created.
3. Right click on the newly created website >> "Add Application"
a) Alias "ContentServer"
b) Application Pool >> Select "AppPool_ContentServer"
c) Physical Path <path of the Content Server installation directory>
d) Click "OK"
Content Server Application will be created.
4. Double Click on the website >> Handler Mappings
a) Select "ISAPI.dll" from the list >> Edit Feature Permissions
b) Check the tick boxes for "Script" and "Execute"
c) Click "OK"
5. Double Click on the website >> Handler Mappings
a) Enable "Anonymous Authentication"
b) Enable "Basic Authentication"
c) Enable "Windows Authentication"
6. Double Click on the IIS Server name >> ISAPI and CGI Restrictions >> Click on "Add"
a) ISAPI or CGI Path <path of the Content Server installation directory,selecting "ContentServer.dll" >
b) Description "ContentServer.dll"
c) Check the tick box "Allow extension path to execute"
d) Click "OK"

Content Repository creation issue in OAC0 tcode

Dear All ,
I installed Content Server 640 verison with Max DB 7.6 successfully on Windows Server 2008 R2 server.I did the the installation on the same server where my ECC development system is running.
When I'm creating the content repository in OAC0 getting the below error.
<<<<CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified, Error Code: 0>>>>
I followed SAP Note 301352 - ODBC driver is not registered ,and used the below command to register ODBC driver but it gives me error saying Can't create registry value.
C:\>odbcreg LiveCache -i -p f:\sapdb\programs\pgm
Error : Can't create registry value.
I did the installation using domain ID which is assigned to administrators group on local host.not able to figure it out ,whats the issue.
Can you please help me to fix this issue please.
thanks

Hi Khaiser,
You need to do the following,
In CSADMIN got to setting.
Add the parameter : Driver = MaxDB
Restart the system and check it should work.
Regards,
Deepak Kori

Software simulation issue - help!

When extending the screen of my laptop by using an additional monitor and using the software simulation tool on Captivate 7, I have re-sized and aligned the red record border to the correct size (1280 x 720) and recorded the action. When the slides appear in Captivate, the red border can be seen, the recorded area has moved and the mouse position is now wrong.
I need the extended monitor because the laptop has the wrong resolution for what I am recording. Is there a way to resolve this?

Hi @Onanisland
Welcome to the HP Forums!
It is a great place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after doing some updates your Instant Text is no longer functioning fully.
If you click on the shield or logo or perhaps right click do you get any additional details?
Have you tried using MS Fix It to try and overcome this difficulty?
Have you tried contacting the manufacturer of the software for possible solutions ? Textware Solutions Forums
There are also contact links on the bottom of the Textware solution forums.
You could also do a restore back to before the updates were installed. HP Notebook PCs - Using Microsoft System Restore
You could also try uninstalling the software and reinstalling.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Content Server Configuration issue

Hi Gurus
I am working on Content server configuration.
Installed Content server (640 build 201 ) on Win 2003 server
- Using SAP ECC 5.0
- This is initially our test environment so here we are not using any certificates
I am facing issue with TXN (si24_csconfig) configuration of newly installed content server.
It flash error "error occured while creating depositories"
Please note that this transaction will go on for some work if i try administrator user, which is the user for NT server where content server is installed. With any other user it again prompt for password and will not move forward untill I provide this user-pwd.
When I check in txn slg1 log following is the error message:
HTTP error: 500 (Internal Server Error) "CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Message no. CMS025
Diagnosis
Error in accessing via HTTP
500 (Internal Server Error)
"CreateTab ContentStorage, connect error SQLConnect failed, [Microsoft][ODBC Driver Manager] Data s
Please suggest.
Best Regards
Jaswant

Hi,
Give the following parameter in CSADMIN for windows:
Driver MaxDB
Immediately the error goes away.
Regards,
Phani.

HP P1102 installing driver issue

Hello,
I have problem with installing of driver for Printer HP LaserJet P1102.
At the end of installing is appeared message: Printer installation failed. Printer was not installed.
After this I tried to install again, and message was:
1. After click close disconnect USB cable from the printer.
2. Turn printer off, and after this turn it on.
3. Connect USB cable to the printer.
I do this but unsuccesfull.
Please help.
I have Windows 7 Ultimate operating system.

Hi @Visla ,
I see that you are having issues installing the printer. I would like to help you out today.
Disconnect the USB cable.
Here are the steps to run the uninstall from the computer or the CD.
To uninstall from program files:
Touch the Windows key and the E key to access the computer window.
Select the C drive.
Select program files or program files x86.
Open the HP and printer name folder.
Select uninstall.
Uninstall the software from the CD:
Touch the Windows key and the E key to access the computer window. Right click on the CD for the printer, left click open in a new window, double click on uninstall.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Restart the Print Spooler.
Click Start (), type services.msc in the Start Search box, and then press Enter.
Right-click Print Spooler, and then click Properties.
Under Service status, click Stop and then Start, click OK.
Make sure the printer is connected directly to a wall outlet and the USB cable is connected directly to the computer.
The USB cable shouldn't be longer then 6 feet. Don't connect the USB cable until prompted.
Download, save and then run the newest drivers or run the CD.
HP LaserJet Pro P1102w Printer Drivers.
Test the printer.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Downloading and installing podcast issues

The podcasts I try to download get to 100% downloaded and then I get a message that the podcast had an error downloading cancel or retry. It's been consistent. Anyone else having these issues?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Installing Driver Issue

Hello;
First of all, english is not my first langue.
I have GT70 Dragon Edition and I decided to update my drivers so I went to;
http://www.msi.com/support/nb/GT70_Dragon_Edition.html#down-driver&Win8%2064
and downloaded drivers. However, I couldn't install Bigfoot LAN and Killer (Bigfoot) LAN.
For installing Killer (Bigfoot) Lan I used cleaning tool and after that I tried to install Killer but it gave error that your hardware doesn't suppor Windows.
In addition, when I try to install Bigfoot LAN (not killer) everytime it says 'an older version of the software found' and says it upgrade but nothing happen.
For this problems, I did what he/she says on here;
https://forum-en.msi.com/index.php?topic=178064.0
However, I don't have Killer Network Maneger anymore and I don't know I did everything correctly, why I couldn't install Killer (Bigfoot) Lan and Bigfoot LAN. Do I worry?

Quote from: mklim;111725
Try if this driver download could help.
https://drp.su/download.htm
MSI provides customized drivers to our users and the third-party's program for the driver update might cause some unknown issues. Thus, we don't suggest our user to use the third-party program for the driver update.

Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

Hi everyone,
Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
The main problems are as follows:
There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
Service.
The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long... It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
I receive an error in the Event Log regarding RPC over HTTP Proxy
to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
this post
The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
for over chatty warnings about disk space (the warning is that we have loads of space...)
This is a brief outline of the environment:
Exchange 2007 SP3 RU13
UK - Two physical locations in a stretch LAN (100Mb WAN)
4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
2 x Virtual Windows 2003 R2 - Hub Transport Servers
2 x Virtual Windows 2003 R2 - Client Access Servers
1 x Virtual Windows 2003 R2 - Unified Messaging Server
1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
US - One physical location
1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
Exchange 2013 CU5
UK - Installed into same site along side Exchange 2007 servers
1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
Problem 2 Error Message - Please note, server names and domain name changed:
Log Name:      Application
Source:        MSExchange Front End HTTP Proxy
Date:          18/07/2014 10:00:37
Event ID:      3005
Task Category: Core
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EXC2013.domain.local
Description:
[RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
Event Xml:
<Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
<System>
    <Provider Name="MSExchange Front End HTTP Proxy" />
    <EventID Qualifiers="32768">3005</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
    <EventRecordID>64832</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EXC2013.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>RpcHttp</Data>
    <Data>EXC2007CAS1.domain.local</Data>
    <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
    <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
</EventData>
</Event>

Hi Off2work,
I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
I will see if UM drops out of that list once I've configured it shortly
Thanks for taking the time to respond (and that goes to DareDevil too)

Problem with Business Content install in ECC5 IDES

Hi,
I am having tough time installing business content.
After installing ECC5 IDES, I am trying to install Business Content in BW ( Client 800).
In SBIW, (under Business Content DataSources), I did Transfer Application Component Hierarchy.
Then I transfered few DataSiurces ( 0MATERIAL_ATTR)
Then in BW, I did "Replicate Data Sources". I see all the Datasources in "Data Source Overview"
But When I try to install Business Conetent ( rsa1>> Business Content >> Select Object Types >> InfoObjects>> Select Objects>> Double click ), I couldn't find any InfoObjects from source system. I tried the same for InfoCubes as well..
Am I missing anything?? I appreciate your help.
Thanks
Samba

ECC will have content for 'source system' ie datasource and extractors. On your BW system you need to have the business content add on available before you can see such objects there (infoobjects, cubes).
BW system (whether in the same IDES or another system) needs to have this BW Content add-on. It is one additional step, just having the BW system (without this addon) will not give you what you are looking for.
BW content add-on is typically one set of transport files, installed using SAINT transaction. My guess is your system doesn't have it.

BI Content Install Simulation Issue

Similar Messages

Maybe you are looking for