BI content is displayed or not.

Hi all,
I want to know about the status of BI_content.
That is whether BI content is deployed in the particular system.How is it possible to see the status of the BI content
Regards
Vijay

hi,
goto RSA1select system-statusthere you can see a find symbol(push button) under sap system data. select that onesearch for software component BI_CONT with release, level and support package. if its' there means the bi content is installed. otherwise not.
hope this help you
regards
harikrishna N

Similar Messages

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
David.

Paragraph breaks are good for readability. ;-)
Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

How do you get your email content to display? Mine shows in preview but not when I open the email, How do you get your email content to display? Mine shows in preview but not when I open the email

How do you get your email content to display? Yesterday, I suddenly could only see the content in preview.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

TS5148 When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported".

When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?

I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV

How do I stop the notification pop-up that 'Only secure content is displayed' that comes up nearly every time when I move to a new web page?

This notification pop-up appears almost every time I navigate to a new page which is really annoying when I am trying to study my university subjects online.

Firefox used to have a warning somewhat like that, but now a mix of secure and insecure content is indicated by a "globe" icon instead of a padlock icon next to the URL. The insecure content is not actually blocked.
''Edit: Apparently now you can block the insecure content by making a change in about:config. See cor-el's reply below.''
It is possible you have an extension that blocks insecure content and displays that message? You could check the following tab, and use the Options button to see whether you can change the behavior:
orange Firefox button (or Tools menu) > Add-ons > Extensions category

Custom table can be displayed and not maintainable using SE16n.

Hi Gurus,
I have created a custom table with DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) in SAP ECC 6. The the requirment is, this custom table can be displayed using the transaction SE16n.
This requirement is existing in ECC 5. with same setting DATA BROWSER/TABLE VIEW MAINT. equal to 'N' (Display/Maintainance not allowed) and this table can be viewed using transaction SE16n.
would there be possible that this requirement be implemented in SAP ECC6? would this be due to the version?
Please help.
Thank you..
Regards,
SAI

Hi Kiran,
Thanks for your answer but unfortunately this is not what I'm looking for. Iam also familiar with &SAP_EDIT.
Well, my problem is, the custom table setting Data browser/Table view Maint. is set to "N Display / Maintainance not Allowed" ( under Delivery and Maintainance Tab). Also there is no table maintainance generator setup.
So basically with this setting, in transaction SE11 'Contents' is disabled. And with transaction SE16n, when you execute and tried to view the table, error "You cannot display zcustom_table with standard tool". (checkboxs are hidden)
What the requirement is looking, the custom table can be viewed (this is with the same setting above but can be viewed using SE16n and the checkbox maintain entries is automatically tick but when executed "auth failed" so, basically to view the entries, untick the checkbox then entries can now be viewed.)

Content Type Description is not adding on list

Hello
I have some custom content type on site level and each content type I have different description. When I add content type manually in existing document library, description is also coming for added content type. But when I add content type programmatically,
description not coming with content type it is coming as empty. I have used following MSDN article for adding content type.
http://msdn.microsoft.com/en-us/library/office/aa543576(v=office.14).aspx
Can one please let me know what am I missing here?
Regards
Avi

Hi,
According to your post, my understanding is that the description of the content type not displayed in the site while adding the content type programmatically.
I had tested the code of the above link with a custom content type based on the Document content type, it worked without any issue.
To narrow down the issue, you can check with the following steps.
You can recreate a new content type then check whether it works.
You can use other libraries to check whether it works.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Supported UCM content types by custom content presenter display template

Hi,
custom content presenter display template can only be applied to a Site Studio file? Or the UCM content item type to which the template can be applied can be of different types (says for example an UCM folios or a custom XML file)?
I would like to use the Content presenter in order to customize the presentation of a custom XML file stored on UCM...but as far as I understood I can't do it...I'm correct?
I hope I was clear.
Thanks in advance.
Best regards,
S.

In my scenario, I've a strong requirements in the user interface usability the customer should have in order to perform data entry (it generates the data that made up the XML I'll check-in in UCM): the UI should be more friendly than SS Contributor provides (for example I'll plan to implement it as an ADF page). I've also specifications on the presentation layout.
If I correctly understood, you're suggesting to store in UCM not my custom XML file, but instead a Site Studio data file containing the "same" XML content?
If yes, can I perform the SS data file check-in not using SS Contributor but instead a custom ADF based page? If yes, how can address this?
Thanks a lot.
Best regards,
S.

'black' on 23" HD Cinema Display is not 'black' on my Macbook Pro 15" disp

'black' on 23" HD Cinema Display is not 'black' on my Macbook Pro 15" disp - I'll edit a photo on my desktop cause its lots faster but what looks black on the display does not look black on my laptop. I don't think its calibration because I have put both on the same color profiles and there is no difference. Would the Cinema display just not be as bright/intense as the laptop display since its older? The Cinema display looks fine and hasn't given me any problems...
Any insights?
T

MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay!

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Satellite A210 1AP - The display is not turning on

I had a problem about a mounth ago with my Toshiba Satellite A210-1AP, just once the display did not turn on. Computer was working, all lights were on. That light that shows reading from HDD was blinking, working as normal, but with display still turned off. So I turn it off, and next time I tried it was warking as usual, with display turned on, he asked if i want to start windows normaly, or in safe mode (like when it is restarted unnaturally). Then worked normaly for few days, then it happened again. At that time I couldn't go to the service (computer was on warranty, and how to prove that something happens sometimes if it do not happened there). So I continued to use it, and as time passes by the problem was more often. Then I decided to go to service.
Guy in the service said that the problem is motherboard, so he changed motherboard, and it took about month for him to do it, and then when I called he said me that it isn't working still. And maybe he has to change all parts, display, graphical card is maybe problem, that he didn't saw problem like that...
So my question is do you know what the problem could be? And the second question is can I demand from him, as it passed 30 days to give me new computer instead changeing all parts on it?
Thanks,
Nikola

Thanks for answers.
I have my notebook now back, but there is another question, you said that video card is on board on A210-1AP? Because tehnician said taht he ordered new one, after replacement of mother board...
I also doubt that he lied me with some more things, so I would like to know some things. Is there any toshiba policy that the broken parts have to be send back to toshiba? Because in law there is one paragraphf that sais that he have to give me back also broken parts.
And one more.
Do changed parts have extended waranty? For example I bougth laptor before 1,5 year, so he changed motherboard. Do the motherboard have waranty 2 more years or just half year as other non changed parts.
There is also paragraph about it in serbian law, but tehnician said that I don't have more waranty, and if it dies again (hopefuly not) that I can call inspection...

Mac Mini + A1038 Cinema Display does not work

Hi,
I have a 2009 model Mac Mini with mini-dvi and mini-display port's on the rear. I can connect any of my DVI based monitors to the mac mini using either the mini-dvi to dvi cable or the mini-displayport to dvi cable. All monitors except for the A1038 model Apple Cinema Display.
The cinema display works with 3 other computers with DVI ports, turns right on and is detected right away. When plugged into the mini it does nothing. Sometimes I can get it to work with the mini-dvi to dvi adapter but that is sporadic.
This is the same behavior with a 2009 model mac book pro and macbook. Using the mini-displayport to dvi cable the cinema display does not work but 3 other monitors do.
So my question is, why does apple hardware only work with non-apple hardware?

Is the A1038 the old, plastic Cinema Display that doesn't have a power cord or power supply? It only has a video cable with the special ADC on it? If that's the case, it needs this to run from a newer Mac:
http://store.apple.com/us/product/M8661LL/B

17" LCD Cinema Display does not work on G4 Tower with ATI 9000

Hi,
I have a G4 Tower with the original AGP ATI Radeon 9000B video card. My friend gave me this unit just recently but not the original monitor. Well after he got his new 30" Cinema Display he gave me the original 17"LCD Cinema Display. I was so happy, plugged it into the card and fired up the CPU but nothing! just blank! It is not getting any power for the USB ports or anything. My buddy says the monitor was checked before I picked it up. I yanked the Video card out and put it back in, inside the CPU was clean as was the card, put it back together and still nothing. The VGA monitor I have is connected via adapter to the other input and works fine. I tried doing display settings and the Cinema is not even detected. Is the Video card fried on the digital side?
Do I need a new one?
Here is the info on the CPU:
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.9)
Number Of CPUs: 1
CPU Speed: 400 MHz
L2 Cache (per CPU): 1 MB
Memory: 1.5 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XB0120xxxxx
Any help wold be appreciated.

Hi MFG,
Welcome to the discussions.
The G4 AGP Graphics model originally shipped with an ATY Rage 128 graphics card. The ATI Radeon 9000 graphics card that is installed in your G4 is not the original card.
The ATI Radeon 9000 comes with a native ADC port (which you are trying to use). This port is only fully functional if the computer is ADC enabled. Your model of G4 is, unfortunately, not ADC enabled.
You can confirm this by opening the computer and having a look at the AGP slot (where the graphics card is installed). In ADC enabled Macs, there is an extra slot at one end of the AGP slot to accomodate an "extra leg" that the ADC graphics cards (such as the ATI 9000) have. This extra leg supplies the power and USB feed. You'll probably find this extra leg with no slot for it to go into.
What this means is that you are not getting power and USB feed through the ADC port to your display.
If you want to get the 17" ADC Apple LCD display working off this card (it's definitely the LCD display and not the CRT display, please confirm), you will need to use a DVI to ADC adaptor such as this one:
http://www.drbott.com/prod/db.lasso?code=0111-DVAD
and run it off the DVI output.
You can run your VGA screen at the same time (if you want to) off the ADC output by using this adaptor:
http://www.drbott.com/prod/db.lasso?code=0117-ADCV
This will work off the ADC port because, although the ADC port is not getting USB or power feed, it's still getting the DVI feed (which is what this adaptor needs).
Cheers!
Karl

DVI to ADC adapter STudio display will not power on when used with Mac mini

I have a Mac mini and I just purchased a used apple 17" CRT studio display. I bought the DVI to ADC Adapter as recommended by my Apple store. When I hook everything up (I have checked and redone this two times) The power light will come on for about a second when presses. When the mini powers up there is a blank dark screen. I would appreciate any ideas on this. thanks!
Mac mini Mac OS X (10.4.1)

Hi
unfortunately I think the Apple store have sold you the wrong item.
I'm almost certain the DVI to ADC adapter only works with ADC based flat panel displays. DVI ports can output digital or analogue signals (or a combination of the two). The adapter seems to provide digital, which is why it works with the LCD displays, but not analogue, which is why it doesn't work with the CRT displays.
Confusingly Apple did a 17" Studio display both as a CRT and LCD.
Dr. Bott do a similar adapter but they explicitly state it's not compatible with the 17" CRT.
Unfortunately I'm not sure there's a solution, as the display has an ADC connector yet I'm not aware of any adapters available that will work.

GS70 miniDP/mini Display Port not working

Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.

Quote from: johannes.haase on 09-January-15, 20:16:14
Hi forum,
I recently got a GS70 with 860m graphics that runs win8.1. I can use the HDMI interface with no problems with various monitors. The displays are detected both by the intel software as well as the "change screen resolution" config of windows.
When I plug a monitor into the miniDP ports however the displays are not detected by the system. I tried this with a 27" Samsung as well as a 30" Dell U3011. I used a miniDP2HDMI cable, a miniDP2DP cable and an active miniDP2DVI adapter, none of them works. I am using the latest Nvidia drivers, they have been updated online through the nvidia experience stuff.
I tried to troubleshoot this by using an Ubuntu live CD with the same results. HDMI works out of the box as soon as I plug a cable in. Nothing happens when I use the miniDP cable though.
I also noticed that one cable (miniDP2HDMI) I can put fully into the miniDP port while the other one(miniDp2DP) sticks out 3-4mm and does not seem to go into further even with force. They look alike and the packaging clearly says "miniDP..." though.
How can I fix this?
Thanks.
have you tried to press fn + F2 button? some times some displays wont give signal untill you press that button and then laptop one will either go black or go off then on again and then external monitor will wake up and give picture so try it if you havent and then return back to us if it works or not.

BI content is displayed or not.

Similar Messages

Maybe you are looking for