BI COntent: Key figure *** is not available in version D

Hello,
I am trying to activate 0PUR_C02 in BI content by Before and After Installation ,i got errors-infoobject is not available in Version 'D' 'or Version 'A', I checked in RSD1 InfoObject is in Active version , and i unistalled by selecting "Do Not Install any Below" still am facing same error...
wat is the sol for it....

Hi Vinay,
The BI content objects are delivered in version D. They have to installed(Activated) before they can be used.
In your case the BI content object "0ADDATEFROM" seems not be in inactive state. So search for this BI content object and then activate(install) it. Later you can use it in 0BP_ID .
Reward points if you find it helpful.
Regards,
Harold.

Similar Messages

After activation of atandard business content key figure is not visible

Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modi

Hi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM

Key figures are not available when i performing LBWE action

Hi gurus,
I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04.
But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for that how can i bring those key figures to dataSource for using LO Cockpit..
I heard we need to perform some prerequistes in SBIW.. let me know in breif with step by step..
Full points will assign to all those reply my query early..
Please let me know if not understand my query..
Thanks in Advance

Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice

Appended Key figure is not working in Delta reverse record

Dear All,
I have enhanced 2LIS_11_VASCL datasource, to pull value from condition record, called Surchage.
I have set reversal indicator for this field in my datasource. I have written code in CMOD to get this value from KONV table of that sales order.
Now when value is changed, delta record for this, automatically creates reversal record, but it shows new value of surcharge as negative, because that code is pulling value which currently exists in table.
For example for order 350089 , if surchage is $ 100 . User changes it to $200
Then I get following record.
Reversal Record - $200 (This should be instead -$100 , i.e. previous value)
New Record - $100.
Because of this my new value is not getting updated in table.
I can't use overwrite mode in ODS because some other technical reason.
How can I solve this problem?
appended Key figure is not working in Delta reverse record

LIS have before-after delta. So ODS should be in Overwrite mode. If that is not possible.. try sorting the records in Start Routine such way that the - 100 $ is above the - 200 $ records in Data Package.
but this is risky as it will affect other key figures for which things maybe fine. I guess you need take Data Package records in an internal table. And then sort this internal table. then you can read the internal table in update routine of this key figure.
OR (If you are on BI 7.0) you introduce an InfoSource in between DS and DSO with Overwrite mode for this Key Figure.

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

How to populate the Language Key description is not available

Hi,
Question: How to populate the Language Key description is not available in the Customer text table
The problem is ;
Customer no : 0012345
For this Customer no description is maintained only in EN, JA ,FR from R3 side.
EN : HP International Ltd
JP:HP の国際的な株式会社
FR: Ltd International de HP
There is no value for Language ES.
BW side:
User is login into language Key ES and executing the report based on this Customer no. There is no Customer text value maintained in language Key ES. It should populate the text value empty. BW system - Language ES is installed.
I have a Reporting requirement is - I need to populate the text value for this customer No: HP International Ltd when the user login to language Key ES and execute his reports.
/BI0/TCUSTOMER Customer text table I am able to see the description for the EN, JP, FR text values.
EN: HP International Ltd
JP: HP の国際的な株式会社
FR: Ltd International de HP
If the Customer text is not available in the text table of customer for language key ES - I have to populate the any one of the existing customer text values into the language key ES - example
0012345 ES HP International Ltd
Simplest solution if we maintained ES customer description in R/3 should be ok.
Is their any other logic which I can implement in BW.

Hi,
If you are opting to load Customer Text, there are two options:
1. R/3 maintained.
2. Generic Extraction using Flat Files.
Hope it helps..
Regards,
GPK.

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

Virtual Key Figures its not populated when execute query

Hi All
I did a BADI for populate a Virtual Key Figure, I follow the instructions of link
Link:[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60e34f63-f44c-2c10-488e-c89b04e0ca7c?quicklink=index&overridelayout=true]
In addition I add the code section of data declarated on example of: CL_EXM_IM_RSR_OLAP_BADI section define: IF_EX_RSR_OLAP_BADI~DEFINE, only information that said:
DATA: l_s_chanm   TYPE rrke_s_chanm,
        l_kyfnm     TYPE rsd_kyfnm.
FIELD-SYMBOLS:
        <l_s_chanm> TYPE rrke_s_chanm.
I test the query on RSRT and the virtual Key Figure is "0.00" this look like if the virtual key figure is not populated.
I did other things like:
Set a Break Point on COMPUTE section of my BADI, I saw that the value is assigned, but I don't know how I can continue reviewing the pass of this value to result of query.
I generate again the query on RSRT.
My code is:
IF_EX_RSR_OLAP_BADI~DEFINE
method IF_EX_RSR_OLAP_BADI~DEFINE.
data: L_S_CHANM   type RRKE_S_CHANM,
        L_KYFNM     type RSD_KYFNM.
field-symbols:
        <L_S_CHANM> type RRKE_S_CHANM.
case I_S_RKB1D-INFOCUBE.
    when 'ZGTO_OB2'.
      append 'ZVIRTKF' to C_T_KYFNM.
endcase.
endmethod.
IF_EX_RSR_OLAP_BADI~COMPUTE
method IF_EX_RSR_OLAP_BADI~COMPUTE.
field-symbols <FS_ZVIRTKF> type any.
P_KYF_ZVIRTKF = 16.
assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF>.
<FS_ZVIRTKF> = 10 .
endmethod.
I will appreciate your recommendations, Thanks in advanced.
Al

Thank you very much Sanganya
I saw this:
I put a break point on P_KYF_ZVIRTKF = 16., then I saw that P_KYF_ZVIRTKF obtain value 16.
Then on sentence: assign component P_KYF_ZVIRTKF of structure C_S_DATA
to <FS_ZVIRTKF> , when the system pass this line, I review the sy-subrc and is equal 4, as I understood the ASSIGN sentence did not be complete, the value shoul be 0.
Then when the system try to run the sentence: <FS_ZVIRTKF> = 10 the system send an Execution error that say: GETWA_NOT_ASSIGNED...
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32780).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Exactly the line selected with error is:
>>>>    <fs_zvirtkf> = '10.0'.
I will appreciate your help
Thank you
Al

Key figure does not exist

Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
Yoni

Hi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran.

Error in DTP load from PSA to IC - Error - Key figure 0 not allowed for

HI ALL,
ERROR - Key figure <> 0 not allowed for unit ' '; see long text
Diagnosis
    The unit/currency ' Source unit MEIN ' with the value 'space' is
    assigned to the key figure ' Source Key Fig. DIFF ' with the value '
    4240.000- '.
System Response
    A key figure that is not equal to 0 and for which no unit/currency is
    set has an inconsistent data state. The data record is not processed.
Procedure
    Correct the source data.
Procedure for System Administration
Please guide
BR
Prasad

Hi ,
First af all identify all such records by creating an error DTP so that the same can be collected in Error stack .
1. Go to the Update tab of the normal DTP and there you can find the create Error DTP option .Click on that .
2. This will take you to the Error DTP screen .Use the option 'Valid record updated reporting possible (request green).You can increase the number of errorneous records to be avoided there only .
3. Please make sure you have activated the option of ' Valid records update reporting possible request green ' both in the Normal and Error DTP .Also the number of errorneous records to be avoided to be mentioned in both the DTP's.
4. Activate the DTP's (Both Normal and Error) .
After this can you please run the Normal DTP again .You can check the Error stack to see the errorneous records .When you double click on any record in the error stack it will thrown an error message from where you can find the exact error with those records .You can rectify these records in the errror stack and then run the error DTP to update the same to the data target.
Ideally these records should be rectified in the Source system .
Thanks
Kamal

'Routine' is not available in version 'A'

Hi,
We are transporting process chain to QA system. At the time of collecting the objects for making transport request, gives following errors.
Object '3RWUNFJ34X9ZGLXAL6VWXBPBA' (ROUT) of type 'Routine' is not available in version 'A'
Above object is not found in the Business content and BW Repository as well?
Also searched with Update rules and transfer rules, i didn't find this object?
Could you help to fix this issue?
Thanks

hi
I am having a similar issue saying that the "UPDR DK....." could not be found, when I try to do the "simulate install".
I see the object in BCT (but the symbol is white) and I find that also in Metadata repository as well (it is green there)..
How can I activate it?. (or make it work?)
Thanks for the help.
Esan

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'

Hello all,
I having this situation, first let me tell you that we have transported the queries from dev to qa and then we had to open the qa system to modify our queries. There were a lot of modifications done to the queries in QA and so now I am trying to transport the queries back to Dev so that we can transport it again via normal route.
When I am trying to collect the query in QA I am getting a lot of errors something like this:
<b>Object '43TH...' (ROUT) of type 'Routine' is not available in version 'A'</b>
You wanted to generate an object with the name '43TH...' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
<b>Object '43TH...' (RSFO) of type 'BW Formula' is not available in version 'A'</b>
You wanted to generate an object with the name '43TH..' (in transport request RSFO) of type 'BW Formula' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Can someone tell me why is it erroring out and where can I look to fix it.
Thanks,
Raj

Raj,
Can you please check the formula you mentioned in the Table RSZCALC Table, Provide ELTUID = "43TH...". check the Version whether it is 'A' or 'D'.
If it is not available in 'A' Version, then check the Formula creation.
Probably, it may help you.
Regards,
Nagesh Ganisetti.
Assign points if it helps.

Unable to Transport Querys Object (ELEM) of type 'Query' is not available in version 'A'

Hi,
We need to transport some querys from production BW 7.3.1SP7 to synch with Dev. I know, I know but had no choice but to created querys in PBW due to no data in DEV...
In RSA1, we collect query and get errors for every object (ckf,rkf, vars etc) and when changing dsiplay from hiearchy to list, there are no objects included under the query element.
Opened the system in SCC4 for automatic recording of changes and changes to repository and cross clinet customization allowed and changed the client role to Test.
Tried opening and resaving the query in query designer.
Query is active in table RSRREPDIR
Checked SCN and OSS have yet to find a solution
http://scn.sap.com/thread/1758171
http://scn.sap.com/thread/1623756
Here are the error details
Object '4T3M5JI7050ENPG6G336XWYNK' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '4T3M5JI7050ENPG6G336XWYNK' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thank you so much for your time!
Lee Lewis

This is an SAP BUG which is corrected by this note:
> 1762785 - Object '!XYZ...' (ELEM) of type Query is not available.
> 1816332 - Object 'XYZ...' (ELEM) cannot be collected (RSO296)
Lee Lewis

BI COntent: Key figure *** is not available in version D

Similar Messages

Maybe you are looking for