BI Content load sequence in BI 7
Hi,
I have successfully activated the Technical content. Now I need to load data into the cubes for querying. What is the sequence of loading the data? Which process chains I have schedules, can anyone give me the sequence. Which is the process chain for master data i.e. what do I load before scheduling 0TCT_C0_Init_p01 and 0TCT_C0_DELTA_P01.
Thanks.
Regards
Naveen Agarwal
Hi Naveen,
Please refer to the following threads which include very detailed discussions on Technical content.
BI Statistics Master Data Load
BI - Administration Cockpit
Assign points if helpful,
Regards, Uday
Similar Messages
-
Logistic Data source and loading sequence
Hi Gurus ,
Can anyone help me explain the use of the 2lis_02_CGR and 2lis_02_SCN.
I also need to know the data loading sequence for the following data source
2lis_02_HDR,
2lis_02_ITM,
2lis_02_SCL,
2lis_02_ SGR,
2lis_02_ CGR,
2lis_02_SCN
Thanks for your helpHi,
i.Purchasing Data (Header Level)
Technical name: 2LIS_02_HDR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
ii.Purchasing Data (Item Level)
Technical name: 2LIS_02_ITM
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2000.1
RemoteCube Compatibility:no
Prerequisites:
Activation of the DataSource.
Use :
The DataSource is used to extract the basic data for analyses of purchasing documents consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
iii.Purchasing Data (Schedule Line Level)
Technical name: 2LIS_02_SCL
Technical Data
Type of DataSource:
Transaction data
Application Component:
Materials Management (MM)
Available from OLTP Release
SAP R/3 4.0B
Available from Plug-In Release
PI 2000.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource extracts consistent basic data for analyzing purchasing documents to a BW system.
Delta Update:
A Delta update is supported. Delta process: ABR Complete delta with deletion indicators using delta queue (Cube-compatible).
iv.Allocation - Schedule Line with Goods Receipt
Technical name: 2LIS_02_SGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.0B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the schedule line quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
v.Allocation - Confirmation with Goods Receipt
Technical name: 2LIS_02_CGR
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
This DataSource is used to extract the confirmation quantities allocated with goods receipt quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
vi.Allocation Confirmation with Schedule Line
Technical name: 2LIS_02_SCN
Technical Data
Type of DataSource:
Transaction Data (Movement Data)
Application Component:
Materials Management (MM)
Available as of OLTP Release
SAP R/3 4.5B
Available as of Plug-In Release
PI 2002.1
RemoteCube Compatibility:No
Prerequisites:
Activation of the DataSource.
Use:
The DataSource is used to extract the schedule line quantities allocated with confirmation quantities consistently to a BW system.
Delta Update:
A delta update is supported. Delta process: ABR Complete delta update with deletion indicator using delta queue (Cube-compatible).
If it helps assign points.
Thanks,
Akshay a. -
E-Business Suite R12 Oracle services loading sequence in Windows 2003
Can anyone tell me what is the loading sequence for the following Oracle services for EBS R12 in Windows 2003.
1) Oracle Fulfillment Server service for VIS
2) Oracle Service VIS
3) OracleConcMgrVIS service
4) Oracle RDBMS TNS Listener
5) Oracle ToolsTNSListener
I have the problem where when Windows 2003 starts up, Oracle Fulfillment Server service for VIS is attempting to stop. Seems like the service is set automatic start somehow. I have to wait the service to be completely stopped, and manually restart the service. But I do not know what is the reason that cause this problem
Thanks for advice.
Edited by: user4992799 on Nov 14, 2008 6:39 PMStart the following services first or set to Automatic:
Oracle RDBMS TNS Listener
Oracle Service VIS
Set the remaining services to Manual
Go to your %APPL_TOP% directory and click on envshell<SID>_<host>.cmd. You can create a shortcut and place it somewhere more convenient. Then cd %ADMIN_SCRIPTS_HOME% and run adstrtal.cmd apps/apps to start all of your applications services after the database has started.
You are having problems starting applications services before the database has opened. -
On JSF Page load UI components loading sequence
Hi All,
I have some questions about the UI components loading sequence on the JSF page load.
When a JSF page loads it loads its UI components which have a sequence of getters and setters declared in the backing bean of that jspx page.
Qustion 1: How these getters and setters in backing bean work in loading the jspx page?
Question 2: How this backing bean is related to the Page Definition file for the page loading?
Question 3 (main query): What is the sequence of the getters and setters. Means, if i drop 3 UI components, 1 input text, then a command button and then an output text, then they are accordingly declared in backing bean. On page load first i/p texts getter gets called, then setter, then command button's and theno/p texts, in these sequence.
But can i manipulate their sequence of loading. If yes then how it can be possible?Answer 1: Getters and Setters in bean normally will be bounded to ui component's properties in jspx page, when jspx page loads these getters get called through introspection and setters gets called when a request is submitted.
Answer 2: Backing bean and page definition are two different entities and they are no way related unless you have a data control for the backing bean and have bindings for those methods in page definition file
Answer 3: The sequence of getters and setters depends on the order of the components they bounded to in jspx page. components in jsf page gets loaded from top to bottom so the getter bound to the top component gets called first and the getter bound to bottom component gets called last.
The only way to change the sequence of getter methods getting called is to just change the order of the components they bound to in jspx page.
Usually, it is not suggested to put business logic inside getters and setters, where you have action and actionlisteners for the same. If you follow that, you don't need to worry of the sequence of getters and setters execution
Sireesha -
[TS 41] UI Auto Load Sequence Files
Hi All
I had a labVIEW UI that could load a sequence file when opened (user could change sequence file at run-time).
However, when shifting TestStand from 4.0 to 4.1 (and LabVIEW from 8.5 to 8.6).
The VI still could load the sequence but all the TestStand activex control buttons are disabled so user could not
run the loaded sequence files. I have no idea why this happen and guess it's about TS API changes from 4.0 to 4.1.
So how do I need to modify my code to achieve this? (I know we could use command line but I'd prefer the feature
built-in). I attached my UI (TestStand User interface.vi) and a seququence as a zip file below.
Thank you
Attachments:
Auto Open sequence.zip 182 KBKirika -
The only thing that would cause the UI controls to be disable is if there is no currently logged in user or if the logged in user has limited privileges. So check the settings on the User Manager tab of the Station Option dialog box between the two instances of TestStand that you are comparing. Are they the same, and if not, what is different? Options include enabling Automatically Login Windows System User and create a default user for yourself. You might try disabling Check User Privileges and leave Require User Login empty, but I think there is a known issue where the \run and \runEntryPoint command-line arguments are ignored when no user is logged in.
Scott Richardson
National Instruments -
VT01N-Loading Sequence number functionality /BEV1/RPFLGNR in table VTTK.
Hi Gurus,
While creating shipment in VT01N, in the process screen, one field Sequence number: is showing by default Zero.
Loading Sequence Number in the Tour /BEV1/RPFLGNR in table VTTK.
Sequence number of the load in the tour.
When will this sequence number will take running numbers like 1, 2 .. and so on.
Could any body throw some light on this.
Thanks&Regards
SreekanthNo response
-
Why are my Content Load images -- Exceptions settings not saved?
I designate certain sites as exceptions under Content > Load images automatically. The next time I open Firefox, those exceptions are not there.
This also happens under Privacy > Accept cookies from sites. The exceptions that I put in disappear the next time I open Firefox.
How can I make these exceptions permanent?In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
You can inspect and manage the permissions for all domains on the <b>about:permissions</b> page or for the current domain via the "Site Identity Button" (globe/padlock) on the location bar and click "More Information" to open "Page Info" and go to the Permissions tab.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
You can delete the permissions.sqlite file to reset all permissions. -
Table Load Sequence - Referential Key Hierarchy
I have a schema with around 100 tables. I need to load data in those table in such an order so that none of the referential integrity constraints fail while loading the data. Is there a way I can build a load sequence using some referential key hierarchy?
I don't have an option to disable all constraints and enable them post load.
Using Oracle 11gR1.
Edited by: roboracle on Mar 11, 2011 11:43 AMSorry, my mistake, this forum doesn't allow the < > operator...( @#$%&@#%&@$*@#$!! )
It should be:
with temp_constraints as (
select table_name
, constraint_name pkey_constraint
, null fkey_constraint
, null r_constraint_name
from user_constraints
where constraint_type = 'P'
--and table_name = SOME_TABLE -- for depencencies of one table
union all
select a.table_name
, a.constraint_name pkey_constraint
, b.constraint_name fkey_constraint
, b.r_constraint_name
from user_constraints a
, user_constraints b
where a.table_name = b.table_name
and a.constraint_type = 'P'
and b.constraint_type = 'R'
select rpad( '*', (level-1)*2, '*' ) || table_name relation
from temp_constraints
start with fkey_constraint is null
connect by pkey_constraint != r_constraint_name
and prior pkey_constraint = r_constraint_name; -
SQL*LOADER에서 SEQUENCE 함수와 DECODE 함수 사용하는 방법
제품 : ORACLE SERVER
작성날짜 : 2003-08-22
SQL*LOADER에서 SEQUENCE 함수와 DECODE 함수 사용하는 방법
========================================================
PURPOSE
Unique한 DATA을 load하고자 할때 쓰이는 SEQUENCE () 함수와 DECODE 함수의
사용에 대해 알아보고자 한다.
Explanation
table의 data에 unique한 값을 넣기 위해 sequence을 만들어 사용한다. 이것은
블루틴 #10863 을 참고하면 알수 있다. 이때 loader에서 database의 sequence기능이
아닌 sequence() 함수를 사용하는 것을 테스트해 보고자 한다.
또한 decode 함수를 사용하는 내용을 여기서 다루고자 한다.
함수를 사용하는 경우는 conventional path load인 경우에만 가능하며 direct path load
인 경우는 적용되지 않음을 주의하자.
함수를 사용할때 참조하고자 하는 컬럼앞에 콜론(:)을 붙이면 된다.
SEQUENCE 를 사용하면 각각의 레코드를 로드할때 특정 컬럼을 증가할수 있다.
단 무시되거나 잘못되어 들어가지 않은 레코드에 대해서는 증가을 하지 않기
때문에 주의하여야 한다.
SEQUENCE 함수의 옵션에 대해 알아보자.
SEQUENCE(n,increment) - 지정한 n 값부터 시작하여 increment 값만큼 증가한다.
SEQUENCE(COUNT,increment) - table에 이미 존재하는 로우들을 count한 수에서
시작하여 increment 값만큼 증가한다.
SEQUENCE(MAX, increment - 해당 컬럼의 maximum 값에서 시작하여 increment
값만큼 증가한다.
Examples
< Sequence 함수 사용 예 >
1. sample table 생성
create table t1
(field1 number, field2 number, field3 varchar2(10));
2. controlfile생성
<sequence1.ctl>
load data
infile 'data1.dat'
into table t1
fields terminated by "," optionally enclosed by '"'
(field1 SEQUENCE(MAX,1),
field2,
field3 )
3. load할 datafile생성
<data1.dat>
1234, "ABC"
3456, "CDF"
4. 실행해 본다.
$ sqlldr scott/tiger sequence1.ctl
SQL> select * from t1;
FIELD1 FIELD2 FIELD3
1 1234 ABC
2 3456 CDF
< Decode 함수 사용 예 >
test1 column이 'hello'이면 'goodbye'을 아니면 test1 column값을 로드하고자 한다.
1. sample table 생성
create table testldr
(test1 varchar2(10), test2 varchar2(10));
2. controlfile생성
<decode1.ctl >
Load data
infile 'data2.dat'
into table testldr
fields terminated by ',' optionally enclosed by '"'
(test1,
test2 "decode(:test1, 'hello', 'goodbye', :test1)")
3. load할 datafile생성
<data2.dat>
hello,""
goodbye,""
hey,""
hello,""
4. 실행해 본다.
$ sqlldr scott/tiger decode1.ctl
SQL> select * from testldr;
SQL> select * from testldr;
TEST1 TEST2
hello goodbye
goodbye goodbye
hey hey
hello goodbye
Reference Ducument
<Note 175126.1>
<Note:1058895.6>
<Note:1083518.6> -
I've built a shockwave presentation that is made up of a
number of
movies, external cast cst files and even an externally linked
JPG image
as my background image.
I'd like some advice on how I should set up my shared
components so that
they load up in the right order and the most efficiently.
The problem I've experienced after making everthing shockwave
was that
my background image loaded late so had buttons appearing on a
black
background. I then imported my JPG into a shared external
cast file
(sing standad import). Still seemed to load in the wrong
order.
So, what can I do to ensure my content loads in the right
order?
And where shoudl i put my background image so that it is not
reloaded
every time a new you jump to a new movie?
Thanks.First off I would build a "loading..." screen of some sort.
Second, use preloadNetThing() to load all external items you
need in the order you like. Then move forward in the project.
Hope that helps. -
Interact with content loaded in html overlay / acces accelerometer?
Hi,
is it in any way possible to interact with html content loaded in the Web Content overlay?
Or is there a way to acces the accelerometer in indesign?
greetz
MarioMoved to DPS forum
-
Data loading sequence for 0FIGL_014
Hi experts,
Can you explain or brief the data loading sequence for 0FIGL_014?
Regards.
PrasadHi,
Following is my system configuration information
Software Component Release Level Highest support Short Description
SAP_BASIS 620 0058 SAPKB62058 SAP Basis Component
SAP_ABA 620 0058 SAPKA62058 Cross Application Component
SAP_APPL 470 0025 SAPKH47025 Logistics and Accounting
SAP_HR 470 0030 SAPKE47030 Human Resources
With the above configuration in R/3, I am not able to find the data source 0FI_GL_14.
Can you please let me know what package to install and how to install?
Regards.
Prasad -
Hi Gurus,
As part of everyday deliveries to customers, we load trucks at certain point of time in the morning.
Our requirement is, we receive multiple customer orders in same route to deliver. So, here I am doing wave picking for all those deliveries to pick, but need to control at the time of loading. For ex: I have 10 customer locations to deliver in same route, i need to load 10th customer first in truck , until it finishes system should not allow me to load remaining customer ordered goods. That way we can deliver without any issues when we reach customer location.
How can we achieve this in EWM , please suggest me. Thank you in advance.
Thank you....
SriniHi Srini,
Please find below details for basic understading and possibilities on this
Loading Sequence - Shipping and Receiving - SAP Library
Thanks and regards
Anoop Singh -
Loading sequence physical fonts
Hi guys,
I have one concern=> Please can somebody explain the loading sequence of physical fonts.
Why do I ask?
I wrote some JUnit tests where I compare the current rendering output with an reference image.
Some tests draw a text with the Lucida Sans font-family and their different styling options. (PLAIN, BOLD, ITALIC, BOLD&ITALIC)
The JUnit tests will be executed on different machines (Windows 7 x64 - SP1 - GERMAN, JDK 7u45 x64) and on the build server (Windows Server 2008 R2 x64 - ENGLISH, JDK7u45 x64) and my problem is now that the results between the Windows 7 machines and the server are not equal.
I've found already the reason for this=> the loading sequence of the physical fonts is different.
used physical fonts on the Windows 7 machine (GERMAN):
Lucida Sans [PLAIN] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.ttf
Lucida Sans [ITALIC] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD_ITALIC] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.tt
used physical fonts on the Windows 2008 server (ENGLISH):
Lucida Sans [PLAIN] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.ttf
Lucida Sans [ITALIC] - C:\Windows\Fonts\lsansi.ttf
Lucida Sans [BOLD_ITALIC] - C:\Windows\Fonts\lsansdi.ttf
Now my questions:
1. Why loads the Windows Server 2008 the windows native font if the style is ITALIC?
2. Am I right that the following behaviour is the typical loading sequence?
-> physical fonts in JAVA_HOME\lib\font
-> physical fonts in the OS directory
3. Is there a possibilty/ VM property which allows me to change the loading sequence ? So that the VM preferes the fonts in the OS directory instead of the physical font?
Thank you for your help!!
Regards,
SteveSample Code:
public class TestPhysicalFonts
private enum Style
PLAIN,
BOLD,
ITALIC,
BOLD_ITALIC;
public static void main(String[] args) throws IOException, NoSuchFieldException, SecurityException, IllegalArgumentException,
IllegalAccessException, NoSuchMethodException, InvocationTargetException
Method getFont2DMethod = Font.class.getDeclaredMethod("getFont2D");
getFont2DMethod.setAccessible(true);
Field platName = PhysicalFont.class.getDeclaredField("platName");
platName.setAccessible(true);
// String[] fontNamesToTest = GraphicsEnvironment.getLocalGraphicsEnvironment().getAvailableFontFamilyNames();
String[] fontNamesToTest = new String[] { "Lucida Sans" };
try (OutputStream outputStream = Files.newOutputStream(Paths.get("C:\\physicalFonts.txt"));
PrintStream printStream = new PrintStream(outputStream))
for (String fontFamily : fontNamesToTest)
for (Style style : Style.values())
Font font = new Font(fontFamily, style.ordinal(), 10);
Font2D font2d = (Font2D) getFont2DMethod.invoke(font);
if (font2d instanceof PhysicalFont)
PhysicalFont physicalFont = (PhysicalFont) font2d;
printStream.println(String.format("%s [%s] - %s", font.getName(), style.name(), platName.get(physicalFont)));
UPDATE:
1. If I doesn't execute the sample code from eclipse, than I get the same result as on the server... that means ....
Lucida Sans [PLAIN] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.ttf
Lucida Sans [ITALIC] - C:\Windows\Fonts\lsansi.ttf
Lucida Sans [BOLD_ITALIC] - C:\Windows\Fonts\lsansdi.ttf
2. If I set the default Locale to ENGLISH, than I get the same result as in eclipse... that means ...
Lucida Sans [PLAIN] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.ttf
Lucida Sans [ITALIC] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansRegular.ttf
Lucida Sans [BOLD_ITALIC] - C:\Program Files\Java\jre7\lib\fonts\LucidaSansDemiBold.tt -
Unable to find Content Loader in CQ 5.5
Hi,
I have tried looking for content loader tool at the location: http://localhost:4502/crx/explorer/index.jsp but couldn't find it or the content zipper even.
Please have a look at the attached screenshot.
Please help.When I try uploading the xml, it says not a valida zip file...
I have used Package Manager to create and upload packages but I am not even able to envision how to use it as the Content Loader.
Maybe you are looking for
-
i work on release 11i application and converts some reports to run with xml publisher i want to convert a total field that exist in po report to words it seems to convert number into words isthat possible i tried to make this in oracle reports and it
-
Count of schema based on the value in a column
I have to write a query to count the number of schema that have the value in a column as '1' in a table For ex I have a table called Vendor in all the schemas(schema1 through 50) I have to look for the value in a column(Benefits) if it 1 or 0 . I nee
-
Mac Pro will not boot from cd or external drive
My Mac has an issue whith the boot drive, and I would like to format the drive and reinstall OS-X Mountain Lion and then use Time Machine to resore the Data. When I try to boot my Early 2009 Mac Pro (OS-X 10.8) using the option key, it loads the scrr
-
is it possible to organize the mobileme albums in alphabetical order in iPhoto?
-
Hi What are all the scenarios in whcih we have to give ' alter database open resetlogs is it necessary that we have to give this after performing the incomplete recovery or after changing the database name from the backedup trace controlfile when we