BI Content - Pls clarify

Hi all,
I am new to BI 7.0 Already gone through various sap help docs and other docs in detail but below are very confusing for me to understand. Please help me understand as am confused after reading all.
In my laptop, I have both ECC and DEV installed. I understand that in projects, we are only allowed to access BW. Correct me if am wrong.
My doubt:-
We have various objects in BI Content. Now when am required to install specific cube or DSO or info object, I simply go to specific object and click "Transfer selections". During this, am asked for remote activation. Does this mean i am connecting to ECC and then getting them installed in BW? If so, why is it that these are already provided in BW? I am also able to login to ECC and do the same there as well. Whats the difference? I know this is v.basic and SAP provided standard business content in BW but am confused. Does grouping them as needed and installing them means it connects to ECC and gets the flow there on the right hand side or is it already provided in BW?
Also, what's with this Match or Copy there? I studied that it helps to check the D and A versions. But where? in ECC or BW?
Also what happens if I check it or uncheck it? Studied sap help but in vain.
Once installed, I always don't see the installed ones in the Info provided. Many of them sit in unassigned nodes?
Please be kind and patient to explain me?

Hi,
Check these links
http://help.sap.com/saphelp_nw70/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_bw/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
http://www.google.co.in/url?sa=t&rct=j&q=how%20to%20install%20business%20content%20in%20sap%20bi&source=web&cd=8&ved=0CF0QFjAH&url=http%3A%2F%2Fdocserve.files.wordpress.com%2F2011%2F03%2Fsap_bw_tutorial.doc&ei=6HJbT8OqMs2xrAfhhuniBg&usg=AFQjCNHB7AW2zm_sOTXMpm2jn9IdEEjR8w
Hope this helps in understanding the Business Content Objects in BI
Regards,
Aravind.

Similar Messages

Purchase order scenario ------Pls clarify about the scenarios in SAP

Hi MM Gurus all,
pls clarify the following:
1.Purchase Order given to a vendor & material received from multiple vendors i.e. B or C or D with payment to A.
2.Purchase order to vendor A & B vendor & other vendoru2019s material received from either A, Bu2026n. Shah Alloys want to make payment to all vendors.
3 In my client Cash purchase cycle is there for which they will do PO and GR and payment is made.
Edited by: Girish CM on May 31, 2008 2:52 PM

just try with the partner fucntions

Hi forum pls clarify the concept, about IDOC...pls

hi forum pls clarify the concept,
In a typical IDOC to XI scenario, when my XI receives an IDOC, how it makes out whether it is receiving the IDOC from the intended sender,
does it sees the
<SAP:SNDPOR>???</SAP:SNDPOR>
<SAP:SNDPRN>????</SAP:SNDPRN>
<SAP:SNDPRT>???</SAP:SNDPRT>
in the inbound message and matches it with the business system name in the SLD, to confirm.....
if it is the case, then the name of the business system in the SLD cant be arbitrary, it should be the name that the sender SAP system attaches as the sender port/partner number, in the outbound IDOC. Coz, i think when an IDOC is sent from an SAP system, the System attaches the sender port and and partner number by defaullt, and that partner no./port may not be maintained.
pls clarify

ahmad pls read the following, and pls help ...as i m quite inexperienced::
Let me put the case in this way
(I m a beginner and just testing already developed configuration)
I have a IDOC to XI scenario, where an IDOC is being sent from a
SAP system System ID SD1, client 330,
To my XI, with Syatem ID XD1, client 430,
Now in the sender in SDI330, I made port/partner number for XD1430 as port=SAPXD1, Partner no.=XD1CLNT430, and partner_type=LS,
Now when I sent this IDOC from SD1330 to XI, In the EDIDC I can see, details of both sender and receiver, but the sender details(port=SAPSD1, partner_no.=SD1CLNT330) appears, though they are not maintained(IS IT AUTOMATIC???).
Now when the IDOC reaches XI, how it makes out whether it is receiving the IDOC from the intended sender,
does it sees the
<SAP:SNDPOR>SAPSD1</SAP:SNDPOR>
<SAP:SNDPRN>SD1CLNT330</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
in the inbound message and matches it with the business system name in the SLD, to confirm.....
if it is the case, then the name of the business system in the SLD cant be arbitrary, it should be the name that the sender SAP system attaches as the sender port/partner number, in the outbound IDOC. Coz, i think when an IDOC is sent from an SAP system, the System attaches the sender port and and partner number by defaullt, and that partner no./port may not be maintained.
pls clarify.
Now if all above cases are true, I think that the XI system must have maintained a port/partner to connect to the sender SAP system (SD1CLNT330), to get the IDOC metadata. And can these port and partner nos be arbitrary named or should be named strictly as SD1CLNT330. And should I maintain this port for loading metadata in the IDX1.

HT4623 my apple i pad is currently not working and no apps are opening pls clarify it

my apple i pad is currently not working and no apps are opening pls clarify it

Are there any error messages?
Knowing what you see or are experiencing can help diagnose it.
In the meantime, a common fix, hold down the sleep and home keys for about 20 seconds and see if you can force it to rebood. If you see a silver apple, let go and let it reboot and see if that helps.

No Connection to IB -- R3 Exchange profile - pls clarify the following ?

Hi friends ,
 My scenario is Proxy to file .
 While i am executing SPROXY tcode from R3Dev Syetsm . It is showing as No Connection to Integration Builder
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
No connection to Integration Builder
 While i was follwing this thread they mentined as
u have to check whether ur r/3 system's(WAS 620 or above)
excahnge profile has entries for integration builder.
pls check the Example configuration for accessing
interfaces in the Integration Repository (exchange profile):
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm
If the Parameters are not there u need to add in the respective section's as provided in the link.
exchange profile URL is

http://r3servername:5<instance>00/exchangeProfile
Sudhir
P.S:- don't check XI's exchange profile as it will anyways be there.
Basically to fetch the details of interfaces into SPROXY..connection to XI is required from the R/3's exchange profile
My question is
1. We are having WebAS 7.0 . XI7.0 SP10 . R3 system is ECC6.0
 a. we have ONLY ABAP Instance no java instance running in this . So, how can we access the exchange profile for R3system ?
Regards.,
V.Rangarajan

Hi Ranga,
ECC will use exchange profile in XI, so you don't need additonal java instance for ECC, so when you call the SPROXY, actually it call to XI.
Please make sure the connection from ECC to XI its work.
and your ECC can ping to the XI computer (using domain name)
This solve my problem.
Regards,
Fendi Suyanto

Abap runtime error pls clarify

hi experts,
when i am opening pa30 screen i am getting always abap runtime error pls tell me how to rectify it.

Hi,
The transaction PA30 contains the Object oriented programming. Please check your SAPGui have latest patch updated.
For identifying the error reason. you need to paste initial page of your short dump here.
aRs

11 g oca path (pls clarify this; many thanks)

EXAM
1Z0-007 Introduction to Oracle9i SQL®
or
1Z0-047 Oracle Database SQL Expert
or
1Z0-051 Oracle Database 11g: SQL Fundamentals I
+
EXAM
Oracle Database 11g: Administration I
1Z0-052
=
oracle
Database 11g Administrator Certified Associate
now my question is can i take 1z0-052 before taking (1z0-007)
does it have to follow this sequence
or can i take 1z0-052 first before taking the other requirement before the exams
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=198
thank you for any clarification on this mater
Edited by: oraclehelper on May 26, 2009 2:22 AM

The order in which you take exams is irrelevant. Feel free to take them in whatever order you would like.
Justin

Hi pls clarify

hi,
any body pls tell me what is the it1004-character,it1006-restrictions,it1009-health examinations,it1010-resources and it1014-obselete in organization management.

IT 1004 : Helps in categorizing different tasks maintained in Task catalog.
It has three structure : Rank, Phase, Purpose
Rank : Classifies tasks as Planning, completion, Execute.
Phase : Defines the action of the task like, Execution, or just a decision.
Puropse: the reason for the creation of task.
IT 1006 : Can enter the restrictions applicapbale to the employees assigne to Work center. like for Example, Restrict to only male employees due to heavy lifting in Workscenter, or Restriction from disabled employees etc.
IT 1009 : Helps to enter the pre-requisite health examinations for the employees at work center.
IT 1010 : Helps in Maintainance of AUthority as in eg . The authority assigned to a position or work center to sigh contract, to have the power of attorny
also, to identify resource for the particular position or workcenter like Laptops, etc.
IT 1014 : Obsolate : This infotype is maintain for the object which are no longer of use to the company how ever are occupied currently. Once the object is empty, it should be delimited obsolate position.
You will have a more clear understanding in Help.sap.
Follow the below link.
http://help.sap.com/saphelp_47x200/helpdata/en/bb/bdb28f575911d189240000e8323d3a/frameset.htm
-Pranitha

Intercompany vv imp pls clarify

hi
in one interview i was asked how to automatically propose item category in intercompany process.
and one more thing.
let say in intercompany process, the material shud be there in both the sales organisations. becos wen we create an order for the end customer, the material should be ther in the same sales area as the end customer.
so if the material master is same, then the plant should be copied from the material master to the sales order.(i know the priority that the plnt is copied from CMR, CM and them material mast.). then wer is the point of entering the plant manually in sales order.
do we create any PO for the supplying sales org?
2. the delivery is done by the delivering plant. so ther delivering sales org should hav the masterdata of the end customer to propose ship to address in the delivery doc.
so shud we create the mast data of end cust in supplying sales org?
3. if there are any returns in intercompany process, how do we handle it.

hi,
item cat proposed using del type ,item cat group combination
plant automatically proposed in sales order creation is belongs to same comapany code, if you want to do iner company invoice we have to enter plant belongs to another company code which is also .assigned to sales order+dist combination of ordering sale org
there is no nesasary of creating PO.
once we create sales oreder (with plant belongs to another company code)then the del req sit in plant
2.ship to party address is proposed from sales order itself
2.return order- ret del -credit memo in ordering sales org-then inter company credit memo(iga)

Pls clarify me - gap analysis & user exits

What are the gaps in your project ( give me 2 examples - real time for this) and how do u fill the gap in ur project (where do we fill modifications in gap analysis, i mean in which stage we prep documents for gap analysis)
userexit_number_range- mv45afzz (user exit to create alternate number range for sales doc type,sales org and doc category) we can assign internal no range/external to the sales doc type then what is theuse with this ?
userexit_save_document_prepare - what is the role of this user exit and why it is used
quick responders willl be definitely rewarded
thanks

Hi Kishore.,
Gaps are nothing but cracks in SAP, we doccument the cracks or gaps in blueprint Phase and prepare the gap doccumentation,
Some of the gaps are Legacy filed customer number should be iin Customer master data,We can add filed with the help of user exit
Like wise when we enter in to sales order VA01,In the sold to party column we should find the customer Automatically with out manual entry,For this also we use the User Exit
REWARD if helpfull
Thanks & Regards
Narayana

Pls clarify my doubt

Hi,
iam sujatha. i read some where the virtual cube is coneected with source system by calling a functional module,whether is it correct or not.
thanks
sujatha.

Hi Sujatha,
Refer the following PDF.You can find How to get external data using Infocube.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/39baaa90-0201-0010-499e-f9971180155c
Hope this Helps
Regards
Karthik

Pls clarify doughts in bdc

Hi all
   1. how can we validate the files in application layer.
   2. is it possible totransfer the file from application layer to presentation layer and vice versa
   3.difference b/n bapi and functon module .
   4. .difference b/n sap time and abap time.

hai nagendra,
1A. first of alll download file form application server into interanal table , after that loop the internal table and validate what ever fileds u need.
2A. yes, OPEN DATASET file FOR INPUT IN BINARY MODE encoding default.
               READ DATASET file INTO itab
                 CLOSE DATASET file.
3A. Fm stored in data dictinary
        Bapi in repository
4A. first i saw this type of question , please let me know if any one ansered for this question
thanks
naveen

Pls clarify me about threadsafe and servlet data member

is this threadsafe if my servlet has data member but only initiated by init() and rest of the methods do read only on this data member.
e.g.
public class myServlet extends HttpServlet {
    private String someString;
    public void init() throws ServletException {
        // codes inti someString;
    // rest of methods
    // bleh ...
}one more question: is that someString is so called servlet instance variable?

Hi,
you r going through a wrong way. Try this way
TABLES: PA9180.
git_pa9180 TYPE STANDARD TABLE OF pa9180.
start-of-selection.
SELECT * FROM PA9180 INTO TABLE GIT_PA9180
WHERE ENDDA BETWEEN G_PRE_DATE AND SY-DATUM
AND ZZCASE_NO LIKE 'E%'.
END-OF-SELECTION.
NOW LOOP AT THIS INTERNAL TABLE(GIT_PA9180) AND PROCESS IT FOR FURTHER RESULTS
Hope this solves ur problem.
Regards,
Ibrar

Pls clarify..

Hi
We r two persons in support team.
In one PC we are using essbase 7.1.6 and in another person PC he has to use 7.1.3.
Shall we work with different versions for one server?
Please suggest me.
Thanks in advance!!
Bunny
Edited by: Bunny on Dec 15, 2008 3:58 AM

EAS and client 7.1.6 is backward compatable with 7.1.3 Essbase. YOu should nave no problems working in a 7.1.3 environment. It would not hurt to upgrade the other developer to 7.1.6 as mostly what you will have are bug fixes. The only problem could be if you are developing Essbase API calls from Excel. When you upgrade you will have a different version of the runtime dll files. While I don't believe there are changes between 7.1.3 and 7.1.6, you never know

Pls clarify apple's complex password variety.

This is asked because I find myself in an Orwellian tangle of needing new passwords and/or "ID's" for apparently each Apple function which are then rejected as inapplicable at the next Apple site. Can someone please explain, jargon free, the basic scheme of Apple's password requirements, here, there and seemingly everywhere? Thanks in advance..... I'm an "intermediate" level user in most circumstances but this Apple complexity is newly baffling.

8 characters or more, at least 1 upper case and 1 number, no special characters.

BI Content - Pls clarify

Similar Messages

Maybe you are looking for