BI content to view reports in BEx and Portal

Hi,
I want to install all the BI content related to Query and Reporting.
Can you pls help how to proceed with this like what and all I need to activate.
My requirement is to generate all the reports on 'Vendor Evaluation (from ERP) and 'Tender Evaluation (Bidding Engine) from SRM'..customers should see all the reports in the Netwever portal and as well as in BEx.
Pls help ..
Also I am quite confused with the words :Web Template & BEx web item and BEx web item and Web item..
To view the reports (in BEx and portal) which are extracted from ERP what and all we need to activate?
To view the reports (in BEx and portal) which are extracted from SRM what and all we need to activate?
Please help in this regard..
Regards
Sharif.

Hi Praveen,
Thanks for your immediate response..
My requirement is that I will have to develop reports on Vendor Evaluation from (SS is ERP) and Tender Evaluation (Bidding Engine : SS is SRM)..
To develop the reports for both of the functionalities in BI and to view them in excel mode and in the potal,what is the BI content which I need to activate in BI? -- This is my question.
Whether we need to activate Web template alone or Web template and Web Item both?
In case we need to activate both then which of the following shoud I activate
Either Web Item or BEx item
Web Template or BEx web template
Please provide me the necessary information..<REMOVED_BY_MODERATOR>
thanks in advance..
Regards
Sharif.
Edited by: Pravender on Sep 22, 2010 11:05 AM

Similar Messages

How to create rtf template to view report in Word and Excel, with numeric f

Hi,
Please help me!
How to create rtf template to view report in Word and Excel, with numeric formatted fields (like this 999 999 999,99 with spaces between numbers) and then end user be able to process those fields with Excel tools (sum, etc).
Thank you.

From what I have seen Excel can not handle 999 999 999.00. You can use 999999999.00 and then format it as you want in the xls bt you can not have values like 999 999 999.00 coming from publisher output and have functions on the values in Excel
Tim

Creating webi/crystal report on BEx and retrieving data, an error ocured?

Hi Experts,
I have a problem which many couldnt able to provide a better solution and solve it.
Need your expert solutions.
Installed SAP BI with BO(R/3) integration kit SP3.
Created WEBI report on BEx report via Universe. While trying to load/ refresh/ retrieving the data for display it is throwing an error message like the mentioned below.
Query1: UniverseOnSAPBEx2
A database error occurred. The Database error text is: The MDX query SELECT { Measures.ZPrice } ON COLUMNS, NON EMPTY CROSSJOIN( ZVNAME.LEVEL00.MEMBERS, ZVID1.LEVEL00.MEMBERS) ON ROWS FROM $ZICTEST failed to execute with the error.
UNKNOWN error. (WIS 10901)
Some fields in the Cube/ BEx/ Universe/ WEBI that i have used are ZPrice, ZVendorId, ZVendorName etc.
Regards

looks like it could be the same issues as your other post.

J2EE_Admin Unable to Add iView Permissions (Connecting BEx and Portal)

Hi guys,
I'm trying to set up a connection between BEx Web and Portal in a Netweaver 2004s environment.
Following notes 917950, I have made the configuration using Template Installer and RSPOR_SETUP.
Perhaps unsurprisingly, there are some issues.
Diagnostics & Support Desktop Tool (note 937697) shows 6 red lights:
1. BI iView Permissions
2. BI Mastersystem
3. BI Portal System Permissions
4. URLs Prefixes Customized on Both J2EE and ABAP Side
5. User Mapping of User DDIC
6. WebAS ABAP Certificate and Login Modules Configuration
Here, let's just look at
1. BI iView permissions.
Error: 
The BI Report-Report Interface iView does not have the necessary permissions for being called directly.
My question is
Why can't the J2EE_Admin user do the following fix (Note 983683)?
1) In the portal, follow the path
"Content Administration -> Portal Content"
"Portal Content -> Content Provided by SAP -> Platform Add Ons ->
"Business Intelligence -> iViews -> BEx Launcher (transactions for RRI)"
(pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.rritransaction).
2) From the context menu for this entry, choose "Open" -> "Permissions".
3) "Search" for the "User Group" (Caution: not the "role") "Everyone" and add this to the list of assigned authorizations.
Set the value "None" in the selection field of the "Administrator" column and set the indicator "User". Save your changes.
The "ADD" button is not clickable!! Is it because the J2EE_ADMIN user is not authorized to add permissions?
I hope the experts here can provide some light into the situation. Points will be awarded for helpful answers. Thank you!!
Regards,
SJ

2. BI Mastersystem
it depends on the type of error, see the hint given by the disgnostics tool, if it is sothing to do with BW system alias, so you have to connect to your portal and in system configuration->systemlandscape-> right click on SAP_BW then choose system alias and add the one proposed earlier in the diagnostics tool
3. BI Portal System Permissions
add group everyone on you SAP_BW system on systemlandscape
4. URLs Prefixes Customized on Both J2EE and ABAP Side
the one declared in the portal should be the same as the one in RSPOR_T_PORTAL table. you can modify this table to include the domain name of your URL
5. User Mapping of User DDIC
open your java admin consol (http://server....:5sid00 and then click on user administration, choose ddic the in the mapping tabulation click on modify the enter j2ee_admin as a user for the mapping, it should solve this point, don't forget to save.
6. WebAS ABAP Certificate and Login Modules Configuration
for this one you have to give the error text so i can help.
if it helps give points.
Regards.
Lakhdar Mourad

Report Server 6i and Portal 3.0

I read through several white papers including "Security Tips in Oracle Reports Services Release 6i with Oracle Portal Release 3.0" and tried to start Reports server with no success but maybe I'm misunderstanding how it works. So I have the following questions:
1. We are running reports server on the same server as Oracle Portal and do not have any printers assign to this W2K server which is outside our fire wall. Will Reports server start with no printers assigned? I read out on metal link in Note: 109399.1 "It is no longer necessary to have the reports server service running on an account having a printer installed."
2. We only have port 80 open for the apache web listener. However the tnsnames.ora file requires an entry for the report server with a port=1949. Does this port need to be open?
3. Do you know how I can check to see which ports are available on W2K? Which are being used? IS there a dos command?
4. Is Report Server required to run Oracle Reports 6i through Portal 3.0 with SSO?
null

Gregg,
1 - There is still a bug pending on this, so you may need to assign a default printer. This may be your issue of why you are unable to get the reports server running.
2 - No, port 1949 is only used between the reports cgi/servlet and the reports server. The communication between the client and the reports cgi/servlet is done on the http you are using (in your case, port 80).
3 - Don't know of any such utility or dos command to find our which ports are in use or available.
4 - Yes, you must have the reports server running to run Oracle Reports 6i through Portal 3.0. 6i is not using sso.
Regards,
The Oracle Reports Team

Unable to view report from Bex Report Designer

Hi,
When I log on to Bex Report Designer, I click execute button, it is giving a blank page. It is neither giving any error nor any message. We have recently installed NW2004s and BI Cont 703. Now my problem is how to make report visible in the BEX Report Designer.
Thanks,
Subhani

Dear Prakash,
Thanks for the quick reply.
I have religiously followed your Blog. As far as I know any one who wanna setup BEx has to follow this. It is the one place where all the settings related to BEx front end were discussed and disclosed. Thanks a lot for your exemplary attempt.
Though you have mentioned about the .NET frame work I could not understand how it will effect the "insert" menu of BEx report designer. But i have checked that also and its matching with your recommendations.
My question is pretty simple. With sapgui6.40compilation5 with all the latest patches both for gui, BW and BI. Will i get the options of "Report section", "Report section based on Querry"in the "insert" menu of BEx report designer.
The mentioned options "Report section", "Report section based on Querry" were shown in the webnair of BEx report designer. Pls check the link:
(As per the SDN these menu items should be available in BEx report designer..Pls observe the Insert menu in the very first few seconds)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9c059b57-0701-0010-3283-e5e8669f827e
We have installed and upgraded the system to spstack 8 and done all the settings. Our front end is also updated with the service packs. But we could not get those options. If you can give me your mail id i can send you the screen shots.
Thanks & Regards,
Sridharb

IFS and Portal repositories

I need to craft a content management solution using both iFS and portal and whilst I thought this would be easy - it isn't. Why do iFS and Portal use different document repositories?? (they should either be the same - or at least be configurable to be the same!!). I know that you can extend iFS but I'm noJava expert so wouldn't have a clue how to go about it.
Has anyone written anything for iFS that would allow me to read and write documents to the Portal repositories?? If so would you be willing to share the information.
Thanks
Tim

The following thread, http://technet.oracle.com:89/ubb/Forum36/HTML/001021.html,
confirms Oracle are looking at integrating but with no timelines. I agree customising Portal to us iFS as for it's doc mgnt is an ideal solution. It is something that we are currently embarking on and will let you know how it goes.
Bernard

BW (BEx) and BOBJ Reporting-Tools

Hi All,
I'm looking for an article or anything, that describes the difference between SAP BW (BEx) and Business Objects- Reporting tools .
which tools is suitable for what purpose?
thanks
brad

This isn't mine - it may even be yours - but just in case anyone looks at this thread, here it is
BO vs BEx
Ease of use:
BO - Very user friendly interface, Minimal requirement for MDX code, Some queries take more time in BO analysis, when compared to BEx Analyzer
BEx - Difficult self service reporting and analytics, Being Excel based, it needs extensive VBA or Macro programming for a great UI
Features:
BO - Export functionality (PDF, MSOffice etc), More chart types, Has more advanced features, Design and Preview Tab in the same page, Provides offline capabilities
BEx - Is mostly for SAP only but With integration can access BEx query from BO, Web App Designer is effort intensive, Build and preview are separate views
Support from SAP:
BO - Part of SAP integration roadmap, All current and future dev. in the BI front-end is focused on the SAP BO BI solutions, Crystal Reports is now main reporting tool, replacing BEx Report Designer
BEx - BEx is no longer the strategic direction, BEx product line will be phased out completely by 2016
Compatibility with other data source:
BO - Able to merge data from various sources in the same report, Can connect to any Database, very flexible in design
BEx - Gets data from BI
Implementation effort and ownership cost:
BO - Longer deployment period compared to BEx, Additional server needed, May require additional components setup for BW, May need separate license for Business Objects Enterprise (BOE) platform, BO uses OLEDB for OLAP API via BEx query, may cause an overhead, BW Accelerator may be needed to improve query response time, scalability and visibility.
BEx - Only MS office and BEx client are needed for installation, BEx is bundled with NetWeaver

Personalization and History view in the BEx Open dialog box

We have personalization activated for BEx and have turned it on for :
     -Activate BEx History ON
     -Variables Personalization ON
     -Web Report Personalization ON
When users log in the History button appears when they attempt to open a BEx Query.
However when they click the History button the message "No Objects Found" appears.
These users have opened queries in the past and are not new IDs. We also created test IDs and generated some history by running queries and workbooks. When these test IDs try to open queries the history button still says "No Objects Found".
We are on NW2004s BI. Does anyone have a suggestion as to why this functionality is not working properly?
thank you in advance.

What versions of Photoshop and Windows are you running?
I ask, because running Photoshop CS5 and Windows 7 x64 when I select a view - e.g., Large Icons (which yields thumbnails) it sticks. Make sure you actually open a file after making the change.
-Noel

How to center the content in crystal report viewer?

open crystal report viewer in winform, default at the left top
after maxmium the winform window, content become at the center
another odd thing is that i set window winform size 1208*1024 and crystal report view is fill
then tried, content is not center any more
How to center the content in crystal report viewer in code?
Edited by: Mathew_666 on Oct 6, 2011 5:20 AM

Since there is no control for center you'll need to do the math on your own. This is just a rough draft, but you'll get the idea.
One of the things you'll need to figure out is your buffer to help you give a centered feel. We'll say that value is 50 in this case.
Height
int buffer = 50;
int formHeight = 1000; // we'll assume a height of 1000 in this case
int crystalTop = buffer;
int crystalViewerHeight = formHeight - (buffer * 2); // buffer is at the top and bottom
Width
int formWidth = 1000; // we'll assume a width of 1000 in this case
int crystalLeft = buffer;
int crystalViewerWidth = formWidth - (buffer * 2); // buffer is at the top and bottom

Report on BEx query with 2 structures (one in rows and one in columns)

Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
Ok, I found samr problem in another thread. Sorry.
Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Performace Issue using Crystal Report For enterprise and BEx Queries

Hi all;
    We are generating the following error stack when trying to build a report on top of a BEX query using Crystal Report for Enterprise :
    |7C4F8ECE44034DB897AD88D6F98B028B3|2011 12 12 17:24:21.277|+0100|>>|E| |crj|20380| 56|ModalContext    | |2|0|0|0|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|-|-|BIPSDK.InfoStore:query|CHVXRIL0047:20380:56.174:1|Cut2PbOe3UdzgckPBHn8spEab|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
java.lang.AssertionError
     at com.businessobjects.foundation.logging.log4j.Log4jLogger.assertTrue(Log4jLogger.java:52)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.newInfoObject(InfoObjects.java:576)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:548)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getConnectionObject(OlapCmsSecuredConnectionService.java:125)
     at com.businessobjects.mds.securedconnection.cms.services.olap.OlapCmsSecuredConnectionService.getOlapSecuredConnection(OlapCmsSecuredConnectionService.java:191)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getOlapConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:83)
     at com.businessobjects.mds.securedconnection.loader.internal.SecuredConnectionLoaderImpl.getConnectionFromSecuredConnection(SecuredConnectionLoaderImpl.java:60)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:193)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.loadSecuredConnection(DirectOlapAccessDataProviderBuilder.java:176)
     at com.businessobjects.dsl.services.workspace.impl.DirectOlapAccessDataProviderBuilder.provideUniverseFromCms(DirectOlapAccessDataProviderBuilder.java:63)
     at com.businessobjects.dsl.services.datasource.impl.AbstractUniverseProvider.provideUniverse(AbstractUniverseProvider.java:41)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateQuerySpecDataProvider(AbstractDataProviderBuilder.java:119)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.updateDataProvider(AbstractDataProviderBuilder.java:106)
     at com.businessobjects.dsl.services.workspace.impl.AbstractDataProviderBuilder.addDataProvider(AbstractDataProviderBuilder.java:49)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:56)
     at com.businessobjects.dsl.services.workspace.impl.WorkspaceServiceImpl.addDataProvider(WorkspaceServiceImpl.java:45)
     at com.crystaldecisions.reports.dsl.shared.DSLTransientUniverseServiceProvider.createSessionServicesHelper(DSLTransientUniverseServiceProvider.java:72)
     at com.crystaldecisions.reports.dsl.shared.DSLServiceProvider.createSessionServices(DSLServiceProvider.java:428)
     at com.businessobjects.crystalreports.designer.qpintegration.DSLUtilities.getServiceProvider(DSLUtilities.java:279)
     at com.businessobjects.crystalreports.designer.qpintegration.InitializeDSLRunnable.run(InitializeDSLRunnable.java:82)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
Here seems to be that a plugin is not loaded : com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||Assertion failed: Java plugin for CommonConnection is not loaded.
could this affect the performance of Crystal Reports for Enterprise and how could I fix this ?
Best Regards
Anis

Venkat,
Thanks for your response. Please note, however, the transaction RAD1 does not exist. Let me provide more details about the current settings of the InfoObject.
The Characteristic is 'Item' (0CS_ITEM) and upon going to RSA1 > Modeling > InfoObjects > Item (0CS_ITEM) > Right Click > Display > Business Explorer (tab) > Text Type is set to 'Long Text' and BEx description is set to 'Long description' already.
When I run/execute the query with this Item characteristic, the results in BEx Analyzer is showing appropriate long text, however, Crystal Report for Enterprise shows short text only
K
Edited by: Kumar Pathak on Feb 3, 2012 6:18 PM

Lock rows and columns header in a table view report. It is possible?

hi,
I have a Dashboard that displays a report in "Table View" with many rows and columns.
Is it possible to set a lock on the rows and columns like Excel?
This would have blocked such headers that contain attributes and measures and to browse the report (eg with a scroll bar) had always viewed the headers.
Can you help me?
Thanks

hi,
please go through this discussion
Re: SCROLL BAR to FREZZ HEADERS
thanks,
saichand.v

List View Report with pipelined function in Mobile application and ORA-01007: variable not in select list

Hi!
I have a problem with List View Report in mobile application (theme 50 in apex) after updating to apex 4.2.2. I created Report -> List View. I used select from pipelined function in Region Source. Then when page is running and submited three times (or refreshed three times) I get an error:
Error during rendering of region "LIST VIEW".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 21230833903737364557
component.name: LIST VIEW
error_backtrace:
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613
     ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
I get this error only when I use select from pipelined function in Region Source (for example: "select value1, value2 from table(some_pipelined_function(param1, param2)) ").
You can check it on http://apex.oracle.com/pls/apex/f?p=50591 (login - demo, password - demo).
In this application:
- I created package TAB_TYPES_PKG:
create or replace PACKAGE TAB_TYPES_PKG IS
TYPE cur_rest_r IS RECORD (
    STR_NAME          VARCHAR2(128),
    INFO              VARCHAR2(128)
TYPE cur_rest_t IS TABLE OF cur_rest_r;
END TAB_TYPES_PKG;
- I created pipelined function TEST_FUNC:
create or replace
FUNCTION TEST_FUNC
RETURN TAB_TYPES_PKG.cur_rest_t PIPELINED IS
r_cur_rest TAB_TYPES_PKG.cur_rest_r;
BEGIN
r_cur_rest.STR_NAME := 'ROW 1';
r_cur_rest.INFO := '10';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 2';
r_cur_rest.INFO := '20';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 3';
r_cur_rest.INFO := '30';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 4';
r_cur_rest.INFO := '40';
PIPE ROW (r_cur_rest);
r_cur_rest.STR_NAME := 'ROW 5';
r_cur_rest.INFO := '50';
PIPE ROW (r_cur_rest);
RETURN;
END TEST_FUNC;
- I created List View Report on Page 1:
Region Source:
SELECT str_name,
       info
FROM TABLE (TEST_FUNC)
We can see error ORA-01007 after refresing (or submiting) Page 1 three times or more.
How to fix it?

Hi all
I'm experiencing the same issue. Predictably on every third refresh I receive:
Error
Error during rendering of region "Results".
ORA-01007: variable not in select list
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -1007
ora_sqlerrm: ORA-01007: variable not in select list
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 6910805644140264
component.name: Results
error_backtrace: ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 4613 ORA-06512: at "APEX_040200.WWV_FLOW_DISP_PAGE_PLUGS", line 3220
OK
I am running Application Express 4.2.2.00.11 on GlassFish 4 using Apex Listener 2.0.3.221.10.13.
Please note: this works perfectly using a classic report in my desktop application; however, no joy on the mobile side with a list view. I will use a classic report in the interim.
My region source is as follows:
SELECT description AS "DESCRIPTION", reference AS "REFERENCE" FROM TABLE(AUTOCOMPLETE_LIST_VIEW_FNC('RESULTS'))
The procedure:
FUNCTION AUTOCOMPLETE_LIST_VIEW_FNC(
      p_collection_name IN VARCHAR2)
    RETURN list_row_table_type
AS
    v_tab list_row_table_type := list_row_table_type();
BEGIN
    DECLARE
      jsonarray json_list;
      jsonobj json;
      json_clob CLOB;
    BEGIN
      SELECT clob001
      INTO json_clob
      FROM apex_collections
      WHERE collection_name = p_collection_name;
      jsonobj              := json(json_clob);
      jsonarray            := json_ext.get_json_list(jsonobj, 'predictions');
      FOR i IN 1..jsonArray.count
      LOOP
        jsonobj := json(jsonArray.get(i));
        v_tab.extend;
        v_tab(v_tab.LAST) := list_row_type(json_ext.get_string(jsonobj, 'description'), json_ext.get_string(jsonobj, 'reference'));
      END LOOP;
      RETURN(v_tab);
    END;
END AUTOCOMPLETE_LIST_VIEW_FNC;
Thanks!
Tim

How to pass in a parameter into a report viewer on a jsp - and hidden

Hi, I've built a php application and am using the java environment to enable the crystal report/viewer. The developer was looking how to pass in a parameter into a report viewer on a jsp. Ultimately the end product we need is to get an HTML report viewer loading a report file with hidden parameters so to not expose other customer data (it's a shared database for multiple customers) preferably loaded from php using maybe the php java bridge. Would anyone happen to have any sample code or any guidance?
<%@ page contentType="text/html; charset=UTF-8"
pageEncoding="ISO-8859-1"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<%
// just a test to grab rpt name from GET
String rptFile = "report_files/" + request.getParameter("rpt");
%>
<crviewer:viewer reportSourceType="reportingComponent" viewerName=""
isOwnPage="true">
<crviewer:report reportName="<%= rptFile %>" />
</crviewer:viewer>
Many thanks in advance!
Mark

I am not aware of any html tags you can pass to the viewer for parameter values. Normally, you would load the report in code and then use the SDK with the report object to pass parameter values.

BI content to view reports in BEx and Portal

Similar Messages

Maybe you are looking for