BI Content Upgrade Question

Hi SDNers
I am sure that I will get answer to my question.
We are currently on Add on Package BI Content 3.5.2 on SAP Netweaver04.
As per SAP Recommendation if we are going for BW 3.5 SP19
then we should have BI Content 3.5.3.
We need to know that when we upgrade BI Content 3.5.3 from BI Content 3.5.2 ->>>>> will it overwrite all existing BW objects including standard SAP delivered objects(Infoobjects,Infosurces,ODS, Infocubes etc). These existing SAP delivered BW objects are enhanced or modified by us in our BW system.
As per my understanding UNLESS I install new business content using RSA1-> Business Content the existing old content BW objects should not be overwritten by new content version.
Please help with your inputs.
Regards
Pradip

According to the course material provided by SAP, you have to compare the Business Content objects with the existing objects in the A version.
1. You can change objects that were transferred from the Business Content, since only the derived A version and not the Business Content version of the objects will be changed.
2. Not all objects can be compared
3. If you do not compare the objects, the new version is transferred (copied) and the (old) A version overwritten when you activate the Business Content.
Refer page 39 - TBW42_1

Similar Messages

Business content upgradation risks

Hello BW xperts,
I am a newbie in SAP BW using BW version 3.1. Our client team is planning on a business content upgrade from version 3.1 to 3.2, in which I dont have any experience. They want to know what are the risks involved, especially,during situations when the standard SAP objects, being used in queries, get modified;is there a need to manually activate the objects or does it happen automatically?
Can anybody please help me out with this?
Thanks in advance,
Minuj....

http://service.sap.com/upgrade-crm
https://websmp202.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000429833&
Re: ALE Developer Role
http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/b21f98be886a45a4bb7e123e86e4c2/content.htm
Use these links hope this will help you..?
MSR

Security upgrade question - Getting 6.1.6 downloaded to iphone.

Security upgrade question - I have a 4S phone v6.01 with an upgrade to IOS 7.04 already downloaded and ready for install. I would like to install the 6.1.6 security upgrade instead. How do I delete the ios7 in the queue or have the 6.1.1 pushed as an option to the phone?

You can't install iOS 6.1.6 on that device and must update it to 7.0.6.
(101120)

BI content upgrade has overwritten the objects changes in PRD

Hi Experts,
1. If we have to upgrade the business content with a patch do we do it in PRD as well or else do we do only in DEV.
2. I have a infoobject which is a standard one but i have changed an attribute of it from display to navigational
3. but after the Business content upgrade the infoobject got changed in production but its not changed in Quality or Dev.
what could be the reason for this change and how to avoid such kind of things in future.
Patch we upgraded SAPKIBIII1
thanks and regards
Sreedhar

i even checked in the version comparison
under last changed by : i have user name as DDIC.
Can somebody please give some thoughts on this.

Will an BI Content upgrade from affect the source systems?

Our current BW has BI Content 7.02 patch 003; we are planning an upgrade to 7.03 patch 012. Will we have any impact on the source systems (ECC and SRM)? We are trying to decide if we need to archive and backup the operational systems. Since it is a lot of extra work and increases the number of people affected, we prefer not to do it unless necessary.
What type of regression testing is most common after a BI Content upgrade?
thank you very much,
LLK

Hi
As a data fetching from Source system -- the BI Upgrade does nt have any impact on Source Systems normally -- But u need to prepare a check list with before and after upgrade with DS ( Some times DS get de activated while upgradation ) and the DS are source system dependent so you may have to re activate the same based on requirement/possibilites-- And also you may have to empty the Delta Queues on Source System side -- otherthan that no impact , as far I know.
Hope it helps and celar

I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available it included HDR & Panoramic photo merge. I cant find these. Where do I find them.

well that was a big waste of my time & data allowance then ...
I live in a flaky slow internet area & I keep my photo edit machine off the internet unless & want to update something. CC is no use to me & that useless update just used up a 12th of my allowance for the year ...

Another RAM upgrade question

Hi everyone,
I know there seems to be lots of RAM upgrade questions here but hey thats what forums are for.
I'm looking to upgrade my macbook's RAM it's currently got 2GB (2x1GB)
Is it possible to purchase 1x4GB and put that with one of my current 1GB sticks to create a total of 5GB?
I would be interested to know if this is possible or if anyone has tried it.
Thanks in advance
Scott

This will work if your MacBook is late '07 or newer.

Activity After BI Content Upgradation

Hi Experts,
Is there any we require to do as a necessary step after BI content Upgradation. In my development system BI content is already upgraded, but I didnt do anything but now the upgradation is on Production system so can anyone tell me the steps if any.
Regards,
Mayank

Suggest performing the steps related to data load, change run, query & web template execution. Make sure you are selecting the standard objects (delivered by SAP) pertaining to the respective area while performing the test.
Hope this helps.
Bala

Upgrade question........ sorry 1 more

I have A macbook white, early 08. I just bought my upgrade from audiomidi for 99$. im not ready to upgrade my main studio but i want to upgrade my macbook. simple question, will my key still work in my main studio or will i need to upgrade both. I did a search and it seems it should be ok. Some people said i would need to partition part of my hard drive or something. I just need time to learn how to navigate around on 8. my macbook is 10.5.7 but my ppc is 10.4.11. My setup is solid now so im really nervous to upgrade my main studio. Thank you all for taking time out to read my post i know this is a on going question but i turn to my family for knowledge.

You can even run L7+8 on the same system if you want to, they are independent apps so it's totally ok to just upgrade on your Macbook and keep on running 7 in your studio. L8 doesn't need a dongle anymore, just once during the upgrading process so after that you can leave the dongle in your studio. Be aware though that some L7 content will be overwritten, e.g. Space Designer presets and some Garageband content, which has to be retrieved after the upgrading process.

Windows 2003 SP2 upgrade question in regards to OSS 30478

We are currently running our production system on a windows 2003 sp1 two-node cluster with SQL 2005.
I would like to get it upgraded to SP2, but I have a question on OSS note 30478.
There is a sentence in there stating:
-Special features with Service Packs for Windows Server 2003 in the cluster:
Service Pack 2: Before you import Support Package on platform x86_64, you must replace SAP resource DLL on both cluster nodes with the most current version.
Can someone elaborate on "replace SAP resources DLL on both cluster nodes"?
Does that just mean I need to upgrade the Kernel to the latest version?
It seems to be a fairly bold statement with very vague instructions. Anyways any guidance would be appreciated.

for more details see note <a href="http://service.sap.com/sap/support/notes/1043592">1043592</a>
peter

Satellite L50-A-19N HDD upgrade question

Hi,
I would like to upgrade the standard HGST HDD to a faster Seagate SSHD, and the problem is that in this model L50-A-19N there is no HDD cover, the whole laptop bottom must be removed like in this Link: [Video|http://www.youtube.com/watch?v=IG0lW7t92bI]
My question is can I upgrade the Disk by Myself and if not what can I do to replace the Disk not losing the warranty. I read the manual for this model and there is nothing about HDD upgrades there.
Regards.

Usually on most notebook models HDD is placed at the bottom and access to it is not complicated. As you can see on your notebook model it is not so easy and HDD exchange is not supported. With other words it should not be done by notebook owner.
Valid warranty is very important so please don't do anything on your own. HDD exchange in your case can be done by authorized service provider. If they do this warranty will not be cancelled.
Contact nearest Toshiba service provider and ask for help. Addresses and phone numbers you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
Good luck

Mid 2009 MacBook Pro 13 Hard Drive Upgrade Questions

I bought an upgraded hard drive for my mid-2009 MBP 13. I've done some reading and it appears that my model of MBP shouldn't have drive issues, but I still have a few questions that I'm hoping someone will answer. Perhaps this will all boil down to a little knowledge is a dangerous thing. That is, I may be worried without good reason. If so, I apologize ahead of time.
MacBook Pro 5,5
2.26 GHz
4GB RAM
10.6.3
Firmware version is: EFI64
The stock drive is a TOSHIBA MK1655GSXF (160 GB):
The new hard drive is the Western Digital Scorpio Blue 500 GB 5400 RPM drive.
I noticed that the temperature seemed to spike after installing the new drive. I didn't get the temperature of the hard drive before I took it out, but the CPU was consistently around 170 degrees Fahrenheit and the fan was in the 2,800-2,900 RPM range.
After putting the stock drive back in the MBP, the temps are consistently 142-145 degrees F for the CPU and 95-97 degrees F for the hard drive. The fan is right around 2,000 RPM.
I've read a bit about outrageous load cycles and just wanted to check the numbers.
The WD Scorpio Blue around 4,055 after 27 power on hours.
The stock drive was at last count, at 206701 after 2215 power on hours.
The machine is doing comparable things, downloading podcasts, Time Machine backups, browsing, etc.
The general questions, I have are:
Is the temperature supposed to spike like that when handling a larger drive?
If so, what is a reasonable range? I know I don't have the temperature of the new drive, but if I knew what to expect, I guess I would be more confident putting the new drive back in and not returning it.
What's a normal/healthy/reasonable (don't really know the term I'm grasping for) load cycle to see? I divided the load cycles by the number of power on hours and get around 150 for the WD and 93 for the Toshiba. Are either of those outrageously good or bad? I haven't been able to tell in my reading.
The bottom-line questions are:
Am I just overreacting based on what I've read? Or, is something not kosher and should I return the new drive and get something else? Should I try hdapm or something? If I should return the drive, any recommendations?
I've talked your collective ear off, I'm sure.
Thank you in advance for your responses.
Cheers,
Rob

For what it's worth I've put aftermarket 7200 rpm hard drives in 2006 and 2008 15" MBP's and also a WD Scorpio Black 320GB in a 2009 13" MBP 2.53GHz and have had no changes in cpu temp or fan speed. Your fan speeds and cpu temp with the new drive sound too high. Something else is going on here. The temp is not supposed to spike when handling a larger drive. Maybe it's something like
Spotlight indexing the new drive? Have a look at your Activity Monitor for an active process drawing resources with the new drive.

Visual Studio 2005/2008 and Crystal Reports versions/upgrade questions.

I've tried posting this question on the MSDN forums and gotten no response.
I've downloaded and installed VS 2008 Beta 2.   The versions on the Crystal Reports files included are 10.5.0.1806
I'm currently using VS 2005, with the included Crystal Reports. The versions on those files are 10.2.0.xxxx. I've created an desktop app (in VB) which stores it's data in a database and uses the CR 10 runtime merge modules to generate a report.
I was considering upgrading the Crystal Reports version to XI. I would like to allow customers to modify my delivered report with their own licensed copy of CR XI. I am not providing any functionality within my app to create or modify the delivered .rpt or use it outside my application.
Questions:
Do I need to update the runtime files to CR XI to support rpt files modified with CR XI? Current runtime files are being delivered with the CR 10 merge module.
I see a Crystal Reports for Visual Studio upgrade to CR XI.
Can I update the merge modules to CR XI and still use the CR for VS2005 for development?
Does it make any sense to update CR for VS 2005? Or to get the full CR XI Developer edition? My usage of CR functionality is very limited.
Would there be any benefit to waiting for the release of VS 2008?   How does that change the scenario?
How does Crystal Reports for Visual Studio fit in with the Crystal Reports Lifecycle? It's not mentioned on Business Objects End of Life Dates page . Crystal 10 has a Patch EOL of 31-Dec-07.   Does this apply to CR for VS 2005? Where does 10.5 fit in?
My main concern is allowing customers with CR XI to change the format of my delivered .rpt to run with my app. Adding their company name, logo, etc.   My testing show a CR XI report still works with my current app. But, going forward, what should I deliver and what do I need to use to continue development?

To use Reports designed in XI, you need to use XI or higher runtime, running them in older versions may work, but you may encounter unforeseen issues doing so.
If you are to use VS2005 for development you need to use XI Release 2 (11.5) runtime.
If you are going to use VS2008 for development you need to use Crystal Reports 2008 with Service Pack 0.
The support end of life for versions of Crystal Reports bundled with Visual Studio are linked to what Microsoft's lifecycle for the product is. Generally if there is a workaround for the issue that is simple enough, there will not be a patch created.
The changes you are expecting the customer to do can be accomplished with our RAS SDK which is available without using enterprise starting with Crystal Reports XIR2 SP2.

Ultimate 3B Monitoring Prorated Upgrade Questions!?

I recently enrolled in the 3 Credit Bureau Monitoring for $24.99/Month on June 24 (almost 3 weeks ago). I got a message at the bottom of my Dashboard saying I could upgrade to the 3B Ultimate at a prorated price, since it hasn't been a month. It says you get a fresh report from all 3 Credit Bureaus quarterly, which is worth the extra $5/month for me, so I am going to do it here in the next 24-48 hours.... But my question is will it provide a "newer" or more accurate score than what I already have? It says that they have to pull the information again, and my score has been on a great climb in the 3 weeks I've been enrolled. I've got some things that haven't updated on Transunion FICO, but have on the other 2. Any help/experience is greatly appreciated!

Just want to give an update. It's been about 1 week and I've had no problems. Signing in and out of Win 7 is very fast. Much better than with XP. Even though I have a slower hard drive with Windows 7 (5400 RPM) vs Windows XP (7200 RPM), Windows 7 is faster. Startup time is about the same, but shutdown is a lot faster, just like signing and out and logging in and out.
Wireless LAN (WLAN) configuration was painless and has worked well. It automatically reconnects when I boot and does not drop my connection when i stay logged in but switch users (this happened to me on XP with the IBM Access software).
It has been well worth the upgrade so far.
Systems I use: T42P, T61P, Y510, A600

Upgrade question on WSC4507R-E

HI all,
I have a couple questions about upgrading the IOS on our WS C4507R-E. We have 3 installed cards:
2 WS-X45-SUP6L-E supervisor modules running 12.2(54)SG * running Active/Standby
1 WSX4606-X2-E 10G card
ROMMON is currently at 12.2(44r)SG5
I'm a bit confused by all the available IOS "trees" but I am pretty sure I want to upgrade to: 15.0.2-SG9(MD), at least that is what is recommended when I search for IOS downloads. I don't think I need to upgrade ROMMON, I believe I'm at the minimum required version for this IOS. I may upgrade ROMMON after IOS, there was a note about not doing it first on older IOS versions.
So, my questions are....is the above info correct, regarding ROMMON and the recommended IOS version for my platform?
If so, how would I do the upgrade on the redundant sup modules? The instructions I found didn't address redundant sups.
Anything I need to be aware of that I haven't mentioned?
Thanks for any assistance you can provide!

Hi Eric,
There are 2 ways to upgrade:
1-Load the IOS version you want to both Sups, change the boot variable, so the switch can load the new IOS after the reboot and finally reboot the chassis.
2-Use ISSU see link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_white_paper0900aecd806f0663.html
As for the ROMMON, you usually don't need to upgrade it often and you can always do that later if you need to. I think, some of the newer versions of IOS upgrade the ROMOM as well as the main image but I am not sure exactly for what platforms.
HTH

BI Content Upgrade Question

Similar Messages

Maybe you are looking for