BI Contents of Standard LIS Datasources are not unique in diff R/3 systems

Hi All,
We have two R/3 Systems with the config's and SP's as
Version - 4.7 SP 27 ---> fields not found
Version - 4.7 SP 28 -
> fields found
When we go into LBWE of first one, i have only 22 fields but whn i go to second system data fields are 66.
Datasource name - 2LIS_17_I0NOTIF.
Please advice,
Regards,
Karthik

Same as prev qn

Similar Messages

Components of BI Contents LIS Datasources are not matching

Hi All,
We have two R/3 Systems with the config's and SP's as
Version - 4.7 SP 27 ---> fields not found
Version - 4.7 SP 28 -
> fields found
When we go into LBWE of first one, i have only 22 fields but whn i go to second system data fields are 66.
Datasource name - 2LIS_17_I0NOTIF.
Please advice,
Regards,
Karthik

i have found out the answer as some issues in Views that have added, usage of maintenance pool fields

Service principal names of user j2ee- SID are not unique

Hi everyone,
I am trying to configure the SPNego, following the guide below Configuring and troubleshooting SPNego -- Part 1
but I'm getting an error that I have not been solved
then pictures of the developments so far:
[step 1|http://imageshack.us/photo/my-images/807/59238690.jpg/]
[Step 2|http://imageshack.us/photo/my-images/804/55731867.jpg/]
[Step 3|http://imageshack.us/photo/my-images/27/73007146.jpg/]
Test following and has not worked
http://help.sap.com/saphelp_em70/helpdata/en/45/59b55b943909cae10000000a114a6b/content.htm
thanks
Manuel

Hi, Manuel!
Check these threads for solution:
Service principal names of user are not unique; check the active directory
Service Principal Names of Users j2ee-MDS-tcsm3 not in unique-Check ADC
Regards, Mikhail.

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

RFC_ERROR_LOGON_FAILURE: you are not authorized to logon to target system (

Hi,
While logging into MSS>Managing Services> Scorecard Reporting, I am getting below error:
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: you are not authorized to logon to target system (error code 21)
Kindly suggest what is problem.
Regards,
Honey

Dear Honey Sachdeva,
Chekc the User id and password u used for JCO destination,test the JCO destination and check whether the user which u using got the read permissions on particular system which u might have created in system administration for MSS/ESS.
Regards,
Pradeep.B

Service principal names of user are not unique; check the active directory

Hello Experts,
My company had set up this service principal account to use with Kerberos and I am trying to configure the authentication template using SPNEGO wizzard. The format of the service account is not the same as SAP recommened (J2EE-SID-DOMAIN) but something like abc_de_portal. After trying to use that account with the wizzard I am getting this error "Service principal names of user abc_de_portal are not unique; check the active directory configuration." I am not sure what else in the AD attributes is causing the problem. Please let me know if you have ran into similar issue and how did you corrected. Points will be rewarded of course.
Thank you so much for any help that I can get.

Hello Duy,
SPN of the service user for kerberos has to be unique as you would have made out from the message . There seems to be
someother user having the SPN as yours.
You would have to find the other AD user with the same SPN as yours and then de register that with
setspn u2013d <SPN> Username
Then this error should not come up after that .
There was a tool called Ldifde which you can use for this. We have our AD team do this for us. Would be better if you ask them to carry this out.
Rgds

Standard BI reports are not displayed in Web UI

Dear Experts,
I have a requirement to get a report on activities based on category, employee responsible and planned activities. So i have used standard report - 0TPLB_0SAL_DS01_Q0005_1 - Activities by category and assigned BI logical system and created logical link and assigned to Business role. I have loaded the data in BI successfully.
But, When I login to Sales professional role and click on Report Activities by category, i got "No application data found", then I clicked on Advance analysis from filter area, I can see standard key figures like Interaction log, e-mail, appt, task, overall result. But i am not using these standard key figures, I have customized my own Categories.
Is this causing the problem, if so how could i had my custom key figures. If this is not the issue, could please provide some light on how to get data in the report.
Your help is much appreciated and rewarded.
Thanks
Mahesh

HI Mahesh,
You already have answer in your question.
I can see standard key figures like Interaction log, e-mail, appt, task, overall result. But i am not using these standard key figures, I have customized my own Categories.
As you have you Zcategories, there is no data for the above mentioned categories.
From Query designer, search your query 0SAL_DS01_Q0005_1
In Filters you will find many restrictions.
and in the row/columns - KFs you will find the Categories which are standard.
You can create a Zquery based on these rows and create KFs for Zcategories.
Revert back if any more clarifications.

CL_HTTP_CLIENT, Content-Length in multipart segment are not part of RFC 186

Hi, we are generating http multipart request using class CL_HTTP_CLIENT, and multipart segments header are filled with Content-Type and Content-Length, by default. Both elements are not part od RFC 1867, and request is not working.
We find a way to avoid Content-Type in note 582889 "delete Content-Type of HTTP request header", but we can find anything to avoid content-length.
POST /TransporteBienes/SeguridadCliente/presentarRemitos.do HTTP/1.1
Content-Type: multipart/form-data; boundary=ejjeeffe0
Content-Length:       759
accept-encoding:
--ejjeeffe0
Content-Length:        11
content-disposition: form-data; name="user"
30663288497
--ejjeeffe0
Content-Length:         6
content-disposition: form-data; name="password"
We need to avoid content-length:
POST /TransporteBienes/SeguridadCliente/presentarRemitos.do HTTP/1.1
Content-Type: multipart/form-data; boundary=ejjeeffe0
Content-Length:       759
accept-encoding:
--ejjeeffe0
content-disposition: form-data; name="user"
30663288497
--ejjeeffe0
content-disposition: form-data; name="password"
Is there any way to do that?
Regards.

Anybody?

How to know on what tables the standard bw datasource are built in ECC

Hi Guys,
How do we know on what tables the BW DataSource are built in ECC.
Thanks & Regards
Jagannadha Raju

Hi Raju,
check in below link which will give details of the datasources and associated tables.
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Hope this helps.
Regards,
Reddy

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

NB Type Planned orders are not Displayed in the Order Information System

Dear All
We have one material with Proc. type F.
We have entered a sales order for that item & run MRP ( MRP type PE)
No strategy is assigned to the material.
MRP has created a Plan Order which is of NB type & in MD04 it is showing SDEB against Plan Order.
Now we are not able to see this Plan Order in COOIS.
Although it is visible in MD04,MD16.
Can anyone tell me whether COOIS consider only those plan orders which are of E ( In house Prod ) category ?
How can we display that in COOIS ?
Abhishek Garg

Dear,
COOIS is used for production orders or planned orders olny and it will show u Order information relevent to "E" type procurement.
You can use ME5A

Enhancement to standard WD component are not reflecting in other systems.

A few months back, an SAP consultant created a couple of enhancements to the web dynpro component DPR_DET_DATA_TASK_O for CPROJECT in ECC (the SAP consultant is no longer available).
The first enhancement transported fine to our quality system
The changes on the transport for a second enhancement did not reflect on our quality system.
Transport did not show any errors.
None of the objects are local objects.
¿Does anyone have any idea of the cause of this problem o what I should be looking for?
Thanks in advance.

Hi,
I've had occasions where texts have not been correctly shown after a transport, and have had to manually regenerate (activate) the WD component in the test/prd systems - when I did that the texts then showed.
Hope this helps,
Chris

Datasource is not active in BI though source system has active DS

Hi,
I have three datasources which are active in source system.
i had replicated all these three datasources into BI system...
But even after replication for all the three datasources M version is different from A version..
I cannot activate manually all these datasource in production system as it is allowed only for display purposes..
how can i make these datasources active?

Hi Srini,
The worrying point is i had never done that like before..
I always transport datasource in R/3 side first and then replicate to BI systems and using directly..
since the source systems assigned to it are different ( In BI Dev system R/3 source system and in BI production source system is ofcourse is R/3 production..)
Is it Ok even if the dataasources had different source systems? when transporting from dev to prodution?

How to repeatedly replace different strings with most chars are Not unique?

NOTE: I'm trying to avoid to do a substring of a substring of a ... replacement.
Hello there,
I'm looking for solution on a best approach to do a string replacment in something like example below.
The idea would be to:
1. Open a file and Find a "Title" (i.e. TC162-01.2GFC (after <td colspan=6>)). The Title here will be a dynamic and can be changed from one run to another.
2. If it match to expected value then do a replacement of data between <select... and </select> for another values.
3. Keep going for each block of <tr> ... </tr>
=======================================
<tr>
<td colspan=1>1</td>
<td colspan=1>TC1.1</td>
<td colspan=6>TC162-01.2GFC</td>
<td colspan=2>Unknown</td>
<td colspan=1><select name="res_1_0_20789_21522" size=1>
<option>PASS</option><option>FAIL</option><option selected>No Status</option></select> </td>
<td colspan=1><input type=text maxlength='30' size='10' name='comment_1' value=''></td></tr>
<tr>
<td colspan=1>2</td>
<td colspan=1>TC1.2</td>
<td colspan=6>TC162-01.3ABC</td>
<td colspan=2>Unknown</td>
<td colspan=1><select name="res_2_0_20790_21523" size=1>
<option selected>PASS</option><option>FAIL</option><option>No Status</option></select> </td>
<td colspan=1><input type=text maxlength='30' size='10' name='comment_2' value=''></td></tr>
=======================================

Here's a simple and conceptual example. You could use your real implementation of the getReplace() method.
/** file: test-vlad.txt *************************************
<tr>
<td colspan=1>1</td>
<td colspan=1>TC1.1</td>
<td colspan=6>TC162-01.2GFC</td>
<td colspan=2>Unknown</td>
<td colspan=1><select name="res_1_0_20789_21522" size=1>
<option>PASS</option><option>FAIL</option><option selected>No Status</option></select> </td>
<td colspan=1><input type=text maxlength='30' size='10' name='comment_1' value=''></td></tr>
<tr>
<td colspan=1>2</td>
<td colspan=1>TC1.2</td>
<td colspan=6>TC162-01.3ABC</td>
<td colspan=2>Unknown</td>
<td colspan=1><select name="res_2_0_20790_21523" size=1>
<option selected>PASS</option><option>FAIL</option><option>No Status</option></select> </td>
<td colspan=1><input type=text maxlength='30' size='10' name='comment_2' value=''></td></tr>
import java.util.regex.*;
import java.io.*;
public class Vlad{
public static void main(String[] args) throws Exception{
    BufferedReader br;
    StringBuffer sb;
    String line, fcontent;
    sb = new StringBuffer();
    br = new BufferedReader(new FileReader("test-vlad.txt"));
    while ((line = br.readLine()) != null){
      sb.append(line + "\n");
    fcontent = sb.toString();
    String regex
     = "<td colspan=6>([^<]+)(</td>.+?<select[^>]+>)(.+?)</select>";
    Pattern pat = Pattern.compile(regex, Pattern.DOTALL);
    Matcher mat = pat.matcher(fcontent);
    StringBuffer rsb = new StringBuffer();
    while (mat.find()){
      String title = mat.group(1);
      String value = mat.group(3);
      String newValue = getReplace(title, value);
      mat.appendReplacement
        (rsb, "<td colspan=6>" + title + "$2" + newValue + "</select>");
    mat.appendTail(rsb);
    System.out.println(rsb.toString());
} // end main()
// a dummy implementation
static String getReplace(String tdTitle, String selectValue){
    return "###ANOTHER VALUES###";
}Edited by: hiwa on Dec 11, 2007 11:14 AM

Best Datastructure to store names which are not unique

Suppose you have names like sonia, sagar, suman, sonia, sudipto , abc, pankaj etc
and you need to retrieve values and also insert and delete values. Which datastructure would you consider best for it

Sorry i mean one should be able to step through the collection and search for values.
Also one can insert and remove values
Best datastructure means what would one prefer amongst all the collections

BI Contents of Standard LIS Datasources are not unique in diff R/3 systems

Similar Messages

Maybe you are looking for