BI Cube to BPC ( application) load
We are in 7.5NW , sp4. To get transaction data from BI cube into BPC application, we are using standard process chain(/CPMB/LOAD_INFOPROVIDER) within a DM package.
But every time we run this process chain through DM, I am seeing a FULL load and NOT the delta loads from BI into BPC(even with "Merge data values" option). I thought this "Merge data values" should do the delta loads and NOT full loads.
Anybody has seen this issue and any potential resolutions ?
Thanks
KV
Hello ,
For delta load, you can have a DSO before you load the records into BPc and every time after loading into BPC you can clear the DSO. Please note that this is a BW solution/work around to handle deltas and not a BPC solution.
Thanks.
With regards,
Anand Kumar
Similar Messages
-
BW Staging cube to BPC Delta load - options
Hello Gurus
What are the options of loading BW staging cube data to BPC with Delta options
1)can i have BW DSO (not cube) as staging cube and then load data to BPC cube
what is advantage and disadvantage
2)If i use data manager of BPC to load data from BW staging cube ,it always load FULL load
disadvantage - data doubles in the BPC infocube
3)If i use the BW staging cube to load the BPC cube with standard ETL process of BW ,will the data double in BPC cube
i would guess not as BW handles the DELTA mechanism efficiently ?
4)Data Manager option from BPC
it has 2 options MERGE and REPLACE ,cant REPLACE option work as DELTA from BPC ,as this will avoid creating BW extra cube for delta
ThanksThanks Sheldon ,
so basically ur recommended data flow is below and while loading to BPC, clear write optimised DSO everytime correct ?
ECC>Staging DSO> Write optimised DSO-->BPC
so in the above flow which DSO should convert KF based model to Account based model ,std DSO or Write optimised DSO
so how abt this flow if i put
ECC>Staging InfocubeDELTA infocube-->BPC where i clear DELTA infocube every time I load to BPC
here i am saving the data load activation time for the staging DSO ,
Any disadvantage you think using the approach I select below with staging Infocube
Also wont the data manager option of REPLACE work as DELTA ? if not what is the business case to use this option
Thanks again for your help in advance
Regards -
Is there a way to enable delta for BPC transaction loads ?
Hi,
I am using Data Management package methodology to load data from BI to BPC.
Created Transformation file, created Data management package to download the data from Infoprovider and run the package to load the data from BI cube to BPC application.
everytime i run the package all the data from Infoprovider is read and will feed the application.So is there a way to delta enable the load from BI cube ?
does this method work for volumes ? what is the best practice for BPC NW to load the transaction data from BI to BPC.
thoughts appreciated.
RegardsHi,
Thanks for the information.Your blog is really a savior.
I have followed the steps for automating the DM package.I have created prompt file based on the log file generated from the successful run of the package and i have entered all the required fields in UJD_TEST_PACKAGE programe along with Answer prompt file and i ran the package then some of the records were rejected with error "No authorization for members()on dimension()" and in the detaile log i saw "Cannot access the member (ACTUAL) of dimension (C_CATEGORY)" as the rejected records.
Other hand if i run the package directly in excel client > Run Data management package then the package runs succesfully without any errors.
I have checked the authorizations in Admin Client and i have full Member Access profile.Also checked C_Category is not a secured dimension.
what it has to do with C_CATEGORY dimension??
do we need any special authorisations while we run through the program? even in BI i have sap_all profile.
Pls help. -
Dropping of records(bw cube to bpc)
hi friends,
i'm loading actuals data from bw cube to bpc application via trasnformation file(load infoprovider package).
my requrement is infoobject X is mapped to dim Y. if X consists of value C02 I want to drop those records i.e i don' want those records in bpc applicaion. how can i achieve this (it is reverse of SELECTIOIN Option in OPTIONS area of transformation file)?
thanks.i resolved issue by maintaining conversion file for that destination dim.
External col (CO2)
Internal col (*skip)
Include that conversion file in transformation file
It skips bw recorde for infoobject having CO2 as record value.
THANKS. -
BPC application is taking too much time to load
Hi experts!
I'm facing a very weird problem...
We've developed a BPC application (app name: USM).
This application is taking too much time to be loaded in some computers (around 8 minutes to load). Yes, in SOME computers.
There is around 100.000 registers in the database and most coming from material master data.
If I try to load this USM application in another computer, the process loads smoothly. The computer's hardware is all the same, the server is hyper estimated and everyone is in the same network.
I talked to infrastructure departament and we made several tests. We run BPC on the server (loaded quickly), on several computers (some loads quickly, others don't), used wireless and cable connection (got all the same result) and checked communication between BW and BPC but it is ok.
After all, I tried to load APSHEL application in the same enviroment and it loaded intantly. So, I guess it is something wrong with my application. But if was this, I suppose it should happen to all computers and not only with part of them.
Have anybody ever seen something like this?
Thank you in advance.
Rubens
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:43 PM
Edited by: Rubens Massayuki Kumori on May 12, 2011 8:46 PMHi Rubens,
I would try making a couple of test:
1. I will install the client in a machine that is located in the same network segment, or try using a vpn that comunicates with the server bypassing all security devices, only to see if the network it's the problem.
2. Making a full optimize of one application to see if maybe the problem it's related to the segmentation of the cubes (i don't think that this is the problem but give it a try).
It is very wierd that in some computers happends and in others don't... also try to clean up the local cache of the applications in those computers that are giving to you bad performce and retry.
hope it helps, -
we have created the complete data flow for the cube created by BPC (/cpmb/cube) and loaded the transaction data into the cube but we cant see the data in BPC.
Is there any program to be run at the BI side to make the data available in bpc
thanks in advanceHey,
when you directly load your data with IP from BI to BPC, the BPC cube changes from planning mode to loading mode.
right click and change it back to planning mode.Check it out now.
But as i have said earlier in my prev reply, optimisation would cause loss of data as bpc does not have an idea of this load.
check this pravn's blog for more idea
/people/pravin.datar/blog/2009/04/16/loading-transactional-data-from-any-infocube-to-bpc-application-in-bpc7nw
hope it helps..
Edited by: Vishal Mahawadhi on Oct 20, 2009 8:23 PM -
Transformation file errors(bpc cube to bpc cube)
Hi friends,
I'm trying to load bpc cube data to other bpc cube. Created transformation file with following options & mapping sections.
Simply i've to move from cube A to cube B(A, B are internally created transaction cube when creating BPC applications)
Cube A having around 12 dims and cube B having 7 dims. In mapping i mentioned only 7 dims because target is having 7 dims.
I think it not required to mention about other dimension in A.
*OPTIONS
FORMAT = DELIMITED
HEADER = NO
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
SELECTION=Time,2009.JUL;Category,10
*MAPPING (Target dim = source dim)
ACCOUNT=ACCOUNT
Category=Category
Entity=Entity
InputCurrency=InputCurrency
LOB=LOB
Time=Time
CIRCLE=CIRCLE
*CONVERSION
When i tried to validate and process transformation, system telling "Errors occured while loading data from other cube".
Do i add any other things/options?
thanks,Hi Naresh,
If you have more Dimensions in the source cube than in the target, INFOPROVIDER load is not a good idea. My understanding is that is such case you'll have to find a way to skip dimensions that are not loaded.
Therefore *DESTINATION_APP or BADI DEST_APP are your best options. Basically, if you need any transformation/calculations than use *DESTINATION_APP; if it's just straight aggregation BADI will do it.
How many records do you have to load? How much time do you expect that load will take? If it takes more than 20 minutes take a look at my blog "Improve performance of your BPC scripts" http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/21214. [original link is broken] [original link is broken] [original link is broken]
Hope it helps.
Gersh -
Copy Master Data from BW cube to BPC cube
Hi,
I need to copy a master data from BW cube to BPC cube.
Can I do this from BW? That is, Can I copy master data from the view of the cube of BPC in BW?
I do this from BW and then I see the master data in my BPC cube from the BW view, but when I open my cube in the BPC environment, I don't see nothing of the master data.
What's the problem?
Regards,
Miguel.Hi Miguel -
I think you are asking if you can copy transactional data from a BW cube into a BPC cube (cubes do not contain master data).
If this is what you want to do, yes the BPC IMPORT package is a delivered data manager package that allows you to select a BW cube, transformation file, and additional options (such as work status checking and default logic execution). The use of the Data Manager [process is the "best practice" since you will need to transform the BW data model into the BPC data model and the tools delivered in the IMPORT data manager package are ideally suited for the job. You can automate this process by following the guide at:
[https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides] The specific document is: "How to Export BPC Transaction Data Using a Custom Process Chain"
If you are actually asking for the process for loading master data into BPC dimensions, please read the following "How To" guide that describes the current best practices:
[https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides|https://wiki.sdn.sap.com/wiki/display/BPX/Enterprise%20Performance%20Management%20%28EPM%29%20How-to%20Guides] The specific document is: "How to Automate Master Data Loads in BPC NW"
Regards,
Sheldon -
Can not upload my ipa with Apple Application Loader
After I published with success a new .ipa with DPS when I tried to upload with Application Loader, the system refused my app.
In the past I never had this problem since last week it is impossible until now.
When I asked help the Apple developer assistance, says:
The error you’re receiving now does make sense that it was caused by the Adobe DPS program. Sometimes when using 3rd party app builders it will cause a similar error when attempting to upload a new app or update.
Unfortunately Apple does not support 3rd party app builders, and I would suggest contacting the support group at Adobe in regards to DPS and what setting you need to adjust within the program to successfully upload the app.
When contacting them be sure to have the description of the error ready for them. I’ve seen this similar case with previous developers that have used the Adobe app builder, and have reached a resolution with contacting them.
What can I do?
Thank you in advance.
Silvia -
Application loader not working on blackberry curve 8310
Hi all,
I have some problem with my 8310. I want to install a asian langague, but application loader not working. I have a error message :
"The blackberry desktop software does not have
Blackberry device software for the device that
you have connected to the computer. Contact
your wireless service provider or system administrator"
blackberry desktop manager version 4.2.2.14
blackberry device manager version 4.2.2.10
application loader version 4.2.2.16
What is the good package to install ?
Thanks in advance.hello, you have a 8310. You must use an OS for the exact model. Using one for 8300 or 8330 will not work.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Problem with Application Loader
Hi,
I'm trying to submit an iPhone application to iTunes using the Application Loader on a Mac Mini (OSX 10.5.8). After I enter my iTunes Connect login details I receive the following error response
*There is a problem with you login information*
Please click back and try again
An error occurred talking to the iTunes Store
The login details are correct, the device connects to the itunesconnect web site from Safari without issue.
Is anybody else experiencing a similar issue? Anybody have any ideas on how I might resolve this issue. It's really frustrating as this is now the only way to get an App into iTunes and the error message is not exactly giving me a lot to go on.I got a message in an email saying I had the wrong binary code and therefore had to change it by downloading the application manager.
This was the email they sent me?
Some potential reasons that your binary is invalid: the binary icon doesn't meet our requirements, the payload directory is set at the wrong level in the .app wrapper, the bundle version has not been increased, and so on.
You will receive an email detailing the reason for your invalid binary. To clear the error, log in to iTunes Connect, locate your app, and click Ready to Upload Binary to reset your app's status to Waiting For Upload. This will allow you to redeliver your corrected binary through Application Loader.
Makes no sense to me either! -
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer. How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/ -
Error while uploading an ipa(zip) file using Application Loader
I have created an iOS application with Packager for iPhone
on a windows machine and tested it well on my iphone. But I am unable to upload the app with Application Loader in MAC Book.I have tried a lot to solve this problem.
This is the error message displayed on the Application Loader, after it finishes verification (zipp/unzip and code sign verificaion was succesful) and nearly finishes uploading:
Errors
/var/folders/KK/KK3BViY3FuOpA90EVey0VU+++TI/-Tmp-/412788415.itmsp
Please helpIt was a network problem!!! the solution is to make sure that you have access to the following IPs and ports or simple not becoming behind any firewall
I was behind a firewall and Application Loader wants to have access to the following sockets:
Server IP Address TCP Port UDP Port
itmsdav.apple.com 17.250.236.80 443 n/a
17.152.19.125
itunesconnect.apple.com (Dynamic) 443 n/a
vgr101.apple.com 17.152.249.51 33001 33001-33100
vgr102.apple.com 17.152.249.52 33001 33001-33100
vgr103.apple.com 17.152.249.53 33001 33001-33100
vgr104.apple.com 17.152.249.54 33001 33001-33100
vgr105.apple.com 17.152.249.55 33001 33001-33100
vgr106.apple.com 17.152.249.56 33001 33001-33100
vgr107.apple.com 17.152.249.57 33001 33001-33100
vgr108.apple.com 17.152.249.58 33001 33001-33100
sgr201.apple.com 17.152.249.101 44001 44001-44100
sgr202.apple.com 17.152.249.102 44001 44001-44100
sgr203.apple.com 17.152.249.103 44001 44001-44100
sgr204.apple.com 17.152.249.104 44001 44001-44100
sgr205.apple.com 17.152.249.105 44001 44001-44100
sgr206.apple.com 17.152.249.106 44001 44001-44100
sgr207.apple.com 17.152.249.107 44001 44001-44100
sgr208.apple.com 17.152.249.108 44001 44001-44100 -
I receive many e-mails with zipped files. I can no longer open or unzip my files. A window welcoming me to Application Loader drops down. It prompts for an iTunes Connect login, but will no accept my iTunes login. I have no way to open or unzip my files. Help!!!!
Application Loader, unless there's another one I'm not familiar with, is part of the iOS SDK. That have usurped the .zip, or you may have removed that application but your Mac is still holding onto the mapping of Zip files to that application. Select a .zip file in Finder, Get Info, and go to the Open with section. Select Archive Utility and click Change All. That should fix the problem.
Regards. -
Application Loader Is Now Empty. What Happened?
Hello I finally grew up from windows mobile and went to Verizon and upgraded to a Blackberry Storm 9530. The software in the box was version 4.7 which seems to be the most up to date. I installed it and hooked up my Storm a couple of times and the Application Loader would show everything installed on my Storm. I installed a couple of other apps on the side today without the software and they worked fine. Also, they showed up in the Application Loader with the default loaded software. Tonight I decided to hook the Storm back up to the PC and I went to search for updates for my software. When it tried to download the updates it gave a fatal error and the BB Desktop Manager crashed. My Storm then went to a white screen with a clock and would not response. I had to pull the battery and put it back in to boot my Storm back up. Ever since then when I go to the application loader it only shows the 2 apps I installed today and not any of the other apps so that I can remove or update them. They appear to be on my Storm and function, but not in that list. I uninstalled the software and reinstalled after a reboot and still only those 2 files show.
What can I do to fix my first BB that I now seem to have broken?
Thanks in advance,
A new and worried user.
Solved!
Go to Solution.Aydos wrote:
I installed a couple of other apps on the side today without the software and they worked fine.
What does that mean?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Magic idv gives me a server error
I have been trying to get help with a problem in Iphoto which I cant resolve and now it has occurred in Idvd. When I click on Magic Idvd I get the following error"The server May not exist or it is not operational at this time .Check server name Or IP
-
hi! there must be a solution to this problem! can anybody tell? i want du save text in a file on the client, how to do? thanks a lot!
-
View Objects and Sequence Numbers
Hi, I am creating viewobject from query statement. I would like to get nextval from my sequence, there is a bug in jdbc, and it increments by 2, any idea how to correct that and still using data from db ? Jacek
-
Whats the diff b'tween enhencement spot & enhencement line. Pls explain. Thanks
-
Frames forwarded to wrong access port
Hi, my problem is quite simple: I have an access port of my switch 3750 that receive frames that aren't for his mac-address -.- System image file is "flash:c3750e-universalk9-mz.122-40.SE/c3750e-universalk9-mz.122-40.SE.bin" Here the config: interfac