BI Document Repository Manager and CM repository

Hi,
When we broadcast BI reports to KM, the only repository available is CM repository. Why is BI Document repository not available? Can we provide a link from CM repository folder to the custom BI repositories that we created?
Also if we cant use BI Repository to broadcast from portal, what is it used for?
Rohit

See the Thread - AS ABAP Java Installation
Best Regards Roland

Similar Messages

  • Unable to Launch Repository Manager and Designer in Windows 7

    Hi,
    I am unable to Launch Repository Manager and BODS 3.2 Designer in Windows 7. When I try to launch it, the .EXEs (AL_Designer.exe) shows up in Task Manager but gets killed/ends by itself in few seconds. Please help!
    Thanks and Regards,
    Mohd Sarim

    Check that this is supported on Windows 7 from the PAM location:
    https://websmp101.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000551361
    SAP BusinessObjects Data Services XI 3.2 SP2 – SAP Help Portal Page
    NOTE that this version you are working on is no more supported. (https://apps.support.sap.com/sap/support/pam?hash=pvnr%3D01200615320900003585%26pt%3Dg%257Cd)
    Latest version is Data Services 4.2 - SAP Data Services 4.2 – SAP Help Portal Page
    Mike

  • Missing the entry "BI Document Repository" in KM

    Hi,
    I installed an nw2004s java with ep7.0. Later I deployed the components for BI via JSPM and patched all to the sp5.
    I want to integrate BI into the Portal to run Bex-Reports on Portal.
    At step "Install Repository-Manager for BI-Documents and BI-Metadata in Portal" according the configuration guide I'm missing in the portal under
    System administration -> system configuration -> content management -> repository managers the entry point "BI Document repository".
    Does anyone know what's wrong here?
    Thanks.
    Cemal

    Hi Karsten
    We are also facing the problems of missing BI-repository manager in NW2004s.
    portals..(funny, because they where there all the way up in 2004 latest sp.)..
    I have had a look at the installation guides for nw2004s. They do mention something about setting up various connections in the visual administator..But does not explain explicitly how to install the repository manager in the portal..
    If I go to the swdc i can find some "BI-content for SAP Netweaver -> BI-Cont 7.03".
    In here there is a very large car file, is that really the one..? Or could you please give a "how to guide" as how to set up the BI-repository managers in the NW 2004s portal, if the portal does not contain any BI-repository manager?
    Kind regards and thank you very much...Steen

  • Document Repository

    Hi
    I am constructing a web-enabled document repository for storing office documents, pro-formas etc. and I am exploring various avenues for design... and I have a couple of questions that I hope people in here would be best qualified to give feedback on...
    I am currently using Tomcat integrated with Apache, using a mySQL database...
    I have the option of storing the documents in a database as BLOBs, or in some kind of remote filestore... obviously getting the BLOBs in and out would be slower (or would it?) but which is the 'best' way?
    Do servlets have permission to write to remote network drives, or would the documents need to be stored on the web-server (I feel this would not be a good idea)?
    I need some kind of dynamic navigation 'tree', but I don't really want to use an applet with a JTree... (I am not keen on applets as I feel their slowness harms acceptance of systems that integrate them) is there a better way? Or is there a way of making the applet perform better in these circumstances?
    I need to be able to create and delete tree branches (i.e. directories) from within the browser, any tips on this?
    If anyone has ANY kind of feedback then that would be great...
    Many thanks
    stu

    ok slide is driving me crazy! i managed to get it running within tomcat (jtegrated with apache), and now I am trying to configure a mySQL database store... although whenever it starts, it says it cannot find the mySQL driver, but i have put the jar file in every possible place it could be looking for it... i.e. all the lib directories (in 'common', 'shared', 'slide', 'slide-admin' even in tomcat/server/lib) to no avail just keep getting ClassNotFound...
    any ideas?!

  • Document repository in fsdb/dbfs mode

    Hi,
    Has anyone implemented the document repository in fsdb / dbfs mode? I am looking at possiility of storing documents in different server from where KM is installed. TREX needs to be able to search the documents as well.
    Please advise how the configuration would differ in this scenario.
    Points definitely will be awarded to answers that guide me in the right direction.
    Thanks and regards,
    Arun

    Hi Arun,
    Here is the weblog we followed for implementing FSDB in our system (EP6.0 SP2):
    Creating a CM Repository Manager - FSDB
    We were also able to migrate existing documents from DB persistence mode to FSDB. The trick is to first download all the files via WebDAV to your storage folder, then point your FSDB repository to this folder. This way your existing properties won't get deleted during the transition. I still advise to do a full KM backup before this operation, unless you're starting from scratch.
    Hope this helps,
    Olivier

  • Collaboration Server with customization (use another document repository)

    Does anyone think it'd be possible to makethe Plumtree Collaboration server use Documentum (or any other repository besides Plumtree's own content server) as its document repository,either by somehow customizing the Collaboration server or some other way? Have other companies attempted and had success with similar? In particular our vision is to be able to use Collab's functionality of check-in/check-out, associating documents to Project, discussion threads, etc. Only the documents could come from Documentum (or some arbitrary repository).
    Any input would be appreciated.

    ok slide is driving me crazy! i managed to get it running within tomcat (jtegrated with apache), and now I am trying to configure a mySQL database store... although whenever it starts, it says it cannot find the mySQL driver, but i have put the jar file in every possible place it could be looking for it... i.e. all the lib directories (in 'common', 'shared', 'slide', 'slide-admin' even in tomcat/server/lib) to no avail just keep getting ClassNotFound...
    any ideas?!

  • Repository services on BI Document Repository topics

    In BI Document Repository topics in configuration of KM magement there is a field Repository Services (System Administration->System Configuration->Knowledge Management->Content Management ->Repository managers->BI Document Repository). I must add some repository services?
    Thank's a lot.
    Andrea

    Hi WR,
    did you find a solution? We have the same error
    Thank you
    Best Regards

  • Understanding storage for MetaData "document" repository

    Hello Community,
    We are running BW on an Oracle database, and I'm trying to understand what happens when I attach a document to the MetaData `document` repository.  To get to the repository, we go to RSA1 --> Documents
    From the "content storage" tab after pressing the the administration button, I can see the content repository is <b>BDS_DB8</b>, which appears to store documents in the database table <b>BDSCONT8</b>.
    (While a table name is listed, I would imagine that new documents added to the repository would be insterted into the database as BLOBs)
    What I'm trying to understand is :
    where to documents go when they're inserted into the repository ?
    if I add a 1 Mb document to the repository, does the database grow in size by exactly 1 Mb ?
    what are other details to consider re: storage and disk usage when using the MetaData repository ?
    Thank you,
    Keith

    Shared access signature and stored access policy can be used in this case.
    A shared access signature is a URI that grants restricted access rights to containers, blobs, queues, and tables for a specific time interval. By providing
    a client with a shared access signature, you can enable them to access resources in your storage account without sharing your account key with them. A stored access policy provides an additional level of control over shared access signatures on the server
    side.
    For more details, please refer the following links:
    Create and Use a Shared Access Signature (http://msdn.microsoft.com/en-us/library/azure/jj721951.aspx)
    Use a Stored Access Policy (http://msdn.microsoft.com/en-us/library/azure/ee393341.aspx)

  • Document Repository - Notification

    Currently I am working in Oracle Portal and I am using Document Repository in my application to maintain the files.
    Here my requirement is, Whenever user uploading any document into the document repository. I need to send an email to the group of users.
    Could anyone help me about this? I don't have any idea about this. Thanks in advance.
    Regards
    Balaji S

    Hi Jens,
    I would like to help you, but we need to know a bit more.
    Since the link (if the <portalserver:port> is properly
    populated) looks okay, it is probably not the
    notification itself, but you can check this:
    The texts that are used to generate the mail are found
    in the file:
    \usr\sap\{PORTAL_VERSION}\global\config\cm\etc\notifications\SUBSCRIPTIONADMIN_en.xml
    Here, there should be a line that reads:
    <textspan pEventid="create">The subscription <subscriptionlink/> was created</textspan>
    You should check that this is intact. There is one such
    file for each language.
    If the problem is displaying the subscription, you might try
    calling up the Subscriptions iView and see if that works and
    check the URLs against those in the notification.
    You can find the Subscriptions iView under the
    Content Administration role, then search for "Subscriptions"
    and use the right click menu to preview the iView. If this
    doesn't work, then I think your problem is not related to
    the notifications. This would be one of the first things
    to check to isolate the problem. Please post what you learn
    so that we can help you further.
    Regards,
    Darin Krasle

  • Using TPC : no connector when adding a new "Document Repository"

    I've followed the Oracle TPC (Team Productivity Center) step-by-step tutorial, I've some connectors under "Work Item Repository" and "Versioning Repository" but none under "Document Repository".
    I don't know what to install to get them.
    (JIRA, BugZilla, Task and MSProject connectors all went under "Work Item Repository")
    Thanks

    hello,
    I've completed this turorial
    http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/teamproductivitycenter/getting_started_tpc.htm
    it was well written and well explained .. it instructed me about several parts of TPC but didn't show anywhere how to add a "Document Repository".
    (when I click on the "plus sign" it begins the process of adding but the Connectors combo box is empty)
    I didn't find anything about it when searching directly from google either ..
    I guessed it could be something I'm supposed to know before even looking for TPC, so my question is open to any explanation on "how to add a new Document Repository in the Team Administration window of TPC ?"
    Thanks

  • Shared Document Repository

    Hello Friends,
    I have installed and clustered wci on two machines but I am not sure how to define a shared location for document repository, In fact I am not sure where and how to define/configure the location for document repository for the documents uploaded via content upload service. any help of this will be really appreciated.

    Hi Ryan, thank you so much for so quick response, I have some more concerns and I am sure you will help me on those also -
    1 - I have verified the DR service and content upload services are running properly. I wasn't be able to upload files from local system because while submitting document, I am not getting content upload or option to load local document, I am only able to see www option there in document source drop box and tried to upload from web with url and it was uploaded to tmp for time being. Do you have any idea why i am not getting options other than www in document source, I would guess local document will upload to Active directory , isn't it ?
    2 - I saw there is another war file called ptupload.war, Is it another way apart from wci portal to directly upload documents to KD ? during deployment of this file i am getting "no :file found" exception. Do you have any idea on this ?
    3 - for DR, there id dr.war file to verify KD service but during deployment of this file i am also getting error " no :file found C:\Program Files\plumtree\ptdr\5.0\settings\config\dr-server.xml", I am not sure why it's looking for c:\ however I am deploying from my linux server.
    4 - Is there any way to define KD repository on server apart from wci server, I would like to make a common shared repository seprate for multiple wci instances ( running on different servers ) , How would I make wci services on another server and KD directory on another server ?
    Thanks in advance!
    Edited by: user12399825 on Jan 27, 2010 11:57 AM

  • Reports based BI documents Repository

    Dear BI Community,
    We have setup the the BI document repository - so our users are now able to added comments on some data in some reports. We would like to check some statistics about the number of documents created - when on which characteristic combination...
    Any idea to guide our reflexion?
    Thanks,
    Rodolphe

    Portal 2004s 7.0 & BI 7.0 integration.
    I am having the same problem has anyone found a solution?
    1. Log on to the portal.
    2. Start iView System Administration -> System Configuration ->
    Knowledge Management -> Content Management .
    3. Choose Content Management -> Repository Managers.
    4. Under Classes, choose BI Document Repository.
    5. Create a new instance of the BI Document Repository.
    The problem is step 4.
    There is nothing called "Classes"
    Thank you,
    Sarah

  • Configuration documents for Training and event management &apprisals?

    hello xperts
    can anyone forward me configuration documents for treaining and event management and apprisal? to [email protected]

    Thanks for your suggestions.
    i can't go through new appraisal model with catalog & template, because client is not having ESS,MSS.  appraisal has to done in the ECC only.
    Done the customization like this :
    created scales
    created appraisal model and assign the scales
    for appraisal, Employee can do from APPCREATE transaction rate his own ratings and save.
    Now Appraiser (Manager) from APPCHANGE complete the appraisal.
    now my requirement is (1) after saving the APPCREATE by the employee, notification has to go to his reporting manager only. (2) Manager can do review/change and complete the process to his Employees only (who are reporting to him)
    how can i do this, standard functionality is there or i have to go for ABAP coding ? if ABAP coding what i have to ask them to do.
    Please help in this requirement.
    Thanks and Best Regards,
    Praneeth kumar

  • First Java Project - Document Management and Workflow

    We are about to embark on our first java project around document management and workflow.
    I would be interested to know how others have approached similar projects – Open Source applications or other tools/APIs.
    It would also be good to know of any issues encountered along the way.
    Thanks,
    Steve

    Hi Husein,
    I appreciate your interest in procuring a Document Management/Workflow solution for your AP department...its a very smart move toward streamling that process!
    I sent an email today to Richard Braddock about our solutions. I would be happy to discuss them with you.
    My office phone number is 215-646-8000
    -Martin

  • Document Management and Primavera

    What tool/s work well with Primavera to manage formal communications and related deliverables with the customer and suppliers. Something that can allos us to build custom forms for submittals, work with our email system, attach documents, is fully searchable?
    Thanks.

    Primavera Web is the tool that can do for you the following
    *1 - Workflow*
    Administer Project Process Templates
    Administer Template Categories
    Initiate Project Process
    Initiate Document Approval Review Cycles
    Automatic distribution to decision makers
    Action Required portlet notifications
    Email notifications
    View Approval\Rejection User & Date Stamps
    *2 - Documentation Management*
    Manage Work Products & Documents
    Upload / Download documents
    Check in / check out documents
    Manage Versions of documents
    View History of document usage
    Manage personal documents
    Administer hierarchical document folder structure
    Perform full text searching of documents
    Initiate Document Approval Review Cycles
    Set document security policy
    *3 - Collaboration*
    Communication Center
    Discussion Threads
    Project Events
    Project Discussions
    Project News
    Alerts - Document and Workflow
    Email Integration for Notifications
    Best of Luck.
    Jawad
    Novo Rail, Sydney

Maybe you are looking for

  • Can I use classes and methods for a maintenance view events?

    Hello experts, Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Th

  • Ios 8 Crash And Laggy!

    hy there! I just updated my phone yesterday to this new ios 8! But once i updated my phone to ios 8, there slightly different about this new ios. Like. lots of my apps Are crash, it also makes my phone slower and laggy, the performance are not tht qu

  • Re: Report Painter Diff. formula in same column.

    Hi, I have some queries for report painter. I have 2 columns, A & B. I've created column C and the first 5 row I would like to have a set of formula such as A10 and for the same column, the row 6 to 10 from column B, I want to have formulate B5-10. M

  • RFBIBL00 - Batch Input Error

    Hello Friends, I am using RFBIBL00 to create GL postings. I have used this program successfully before and never had the following issue: RFBIBL00 creates a batch and when the batch is processed I get the following error: Field COBL-PRODPER does not

  • Can't loop a flash presentation

    How can I make the looping work in flash player? The option under the control menu is greyed out. Tried to uninstall and reinstall but still doesn't work.