BI-eAM integration
Hi, I need more information about the integration between eAM and BI in 11i, because I have a problem:
When I need information about the work orders cost, I look in the eAM self service and the cost are the actual cost; but when I look the cost in BI, these data are diferent in the same time period. This occurs because BI read the completion date, while eAM costs take the data direct from the transaction.
Thanks
I don't understand you when you talk about ETL. It's some configuration in DBI?.
I suspect that the problem is the PAC costing, because the diference between EAM organization and others inventory organizations.
Similar Messages
-
Enterprise Asset Management (EAM) Integration with FI/CO
Hi,
Enterprise Asset Management (EAM) integration with FI/CO Configuration process tell me any one.
Regards,
Surendra.Hi,
Costing Integration with PM / EAM:
1. Under Costing Data for Maintenance & Service Orders:
Costing Variants, Valuation Variants, Costing Sheet, Assignment of costing variants to Order types
2. General Order Settlement
Settlement Profile, Allocation Structure
3. Settings for Display of costs
Value Categories, Cost elements assignment to value categories
Regards,
Maheswaran. -
Hi All,
Can anyone tell me how EAm is integrated with OPM. All the shutdown plans defined in eAM. Is there anyway to incprporate these non-working days in OPM MRP automatically.
Thanx in advancePieter,
I have been implementing Financials, OPM / Order Managment and some CRM for a Snackfoods company.
I don't know of any documents that describe what you require but I can describe Inventory in OPM/Discrete as follows:
As I am not sure of you experience with OPM and Discrete Inventory I will explain a few points (all relevant to 11.5.7 OPM Famliy Pack H)
Inventory Orgs in Discrete are equivalent to Warehouses in OPM. If an item needs to be received into the same inventory Org and that Org is process enabled the item must be defined in OPM. All items defined in OPM are Syncronised to Discrete Process enabled inventory org as long as they are select in the Organisations screen.
Formula's = OPM Items
Production = OPM Items
Quality = OPM Items
Purchasing / Receiving = Discrete Items
Order Management = Discrete Items
Manufacturing Accounting Controller = OPM Items
Move Orders = OPM Items
In direct answer to you question
Production-formula = OPM Items
Non-production-formula = OPM Items
Stores = Discrete Item (Initially created in OPM)
Non-production non-formula = Discrete Item (Initially created in OPM. Possibly set to Non Inventory).
All these answers assume that these items will need to reside in the same warehouse (Inventory Org). If items reside in a separate warehouse and none of the transaction listed with OPM against them are required these items could be placed in a Discrete Inventory Org that is not process enabled.
Hope this is of assistance. -
RE: Table to table to data load in odi11g
All,
i am getting below error whiel executing the interface:
I am getting Error not warning. when i see in the Operator
ODI-1228: Task EAM (Integration) fails on the target ORACLE connection DEV2DWH.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Thanks in advanceHi,
Probably has some syntax error or missing parameter in the ORACLE tables used in the interface ODI. See below:
ERROR: ORA-00936: missing expression
CAUSE: A required part of a clause or expression has been omitted. For example, a SELECT statement may have been entered without a list of columns or expressions or with an incomplete expression. This message is also issued in cases where a reserved word is misused, as in SELECT TABLE.
ACTION: Check the statement syntax and specify the missing component. -
Oracle EAM - Linear Asset Management Setup n Integration to Oracle Spatial?
Hello Gurus,
Need help, if anyone can share Linear Asset Setup on Oracle EAM. It will be of great help.
Also, some tips on EAM's integration to Oracle Spatial will be of good help to me.
In advance, thanks a ton!.
RegardsCan anyone update this please?
-
Integration Between Syclo Vs EAM
Dear Experts
Could some one provide me a link or material on integration with SAP Syclo Mobility & EAM.
Please help me out.
Thank you
Rag
Tags edited by: Michael ApplebyHi,
Please find the below link.It may be useful
Latest Syclo EAM/Field Service applications on SMP 3.0
Regards,
Sravanthi -
Hi All,
Have anybody worked on EAM-GIS Integration. Can you please send the link or any documents for the same.
GIS- is geographic information system
Thanks and Regards
Devinderpal YadavHi Bala,
Thanks for answering the question. But i think GIS Software will be useful for the industries such as oil and gas exploration where they have the operations aroung the globe.
So inorder to locate their operation and also in order to meet the strong compliance in such industries its better to keep the track of their operation through a MAP which will e provided by GIS.
What do you think???
Also if you have worked on EAM can you please give me the names of master data tables used in EAM. I am new to EAM and i dont know much about it.These will be useful to me in data modeling.
Thanks and Regards
Devinderpal Yadav -
Integration with Third Party EAM (Enterprise Asset Mgmt) Software
Dear PM Experts,
I have roughly listed interfaces between SAP & Third Party software -EAM .Kindly add to it
Outbound to SAP
- Producrment Proposal for Spare parts( Sparepart No, Qty, Date needed)
- Asset Calenders( Workcenter, Downtime Start time, Downtime End time)
- Preventive Manitenance Orders( Order no, Workcenter, Activities/Duration, Spreparts no, Qty of spare part, Date needed)
- Breakdown Maintenance Requests( Req no, Date/time Requested,
- Breakdown maintenace Orders(Order no, Workcenter, Activities/Duration, Spreparts no, Qty of spare part, Date needed)
- Service Personnel request ( Skill type, Hrs, No of personnel)
Thank you much in advance,
Regards,
JatinHi,
Inbound interface to SAP PM:
1. Running hours update from DCS/ RTDB
2. Create notification from third party S/W
Outbound interface from SAP PM:
1. Equipment synchronization to third party S/W
2. Maintenance order details
3. Maintenance order status update
4. Notification details
5. Notification status update
6. Breakdown details
7. Time confirmation details
8. MTTR/ MTBF update
Regards,
Raj -
Endeca-EBS integration( EAM module)
Hi,
We are trying to integrate EBS with Endeca. After following all the steps in the document ID:1497685.1 , we tried to login through EBS url. The reports came up for EAM module. But when we try to drill down on the hyperlink for a specific work-order in the work orders table it is redirecting to home page after asking the user to enter EBS credentials again! Also when we try to drill down based on specific Asset number, we are asked to provide EBS user credentials before the details of specific asset number shows up. Ideally speaking it should not ask the user to enter the login credentials for the second time. Could someone suggest a solution for this.
Thanks,
AnushaAnusha,
This does sound like a security setup issue, which is why I started with the custom EBSMDEXSecurityManager. However, there are many other places to look. It sounds as if you're suggesting that you can see the EAM-Endeca pages just fine, but when you click on a link within an Endeca results table, instead of going to the WO detail page, it is redirecting you elsewhere. If you have admin Endeca privileges can you go to the "preferences" of the results table and see what the target page URL is for the WO link? Once we've identified the target page (and I believe some EBS Endeca Apps target an intermediate page for security verification purposes), can you ensure your EBS user has proper permissions to view that page? If memory serves, the EBS user might need to be associated to certain security "functions".
Thanks,
Dan -
Process flow for Maintenance Event Builder integrated with PS
Dear EAM Master ,
Good Day. Can anyone show me how's the process flow for Process flow for Maintenance Event Builder integrated with PS.
Appreciate.
Thank you.[SAP Help|http://help.sap.com/erp2005_ehp_05/helpdata/en/d7/d0b83a47d0c649e10000000a114084/frameset.htm]
Thanks
Narasimhan -
This content cannot be displayed in a frame after integrating Endeca with EBS R12.2
Hi,
I just integrated endeca with EBS R12.2 , after I ran option 6 (envSetup.sh) , bounced Studio Managed server , now I am not able to see data on eAM or Payable Dashboard.
when I click on Payable Dashboard , I get "This content cannot be displayed in a frame "
Did I miss any step ?
Thanks
sbtVersion Details :
EBS is on 12.2.4 version
Package Used :
Oracle E-Business Suite Extensions for Oracle Endeca, Release 12.2 V5
V44749-01_1of2.zip and V44749-01_2of2.zip -
Hi experts,
Currently we have integrated EAM/PLM and EHS on ECC 6 EhP4.
Later the user access will be limited to the Enterprise Portal 6.0 for those modules.
For the moment I have implemented the following business packages :
- BP for assets 50.3
- BP for PLM WD (SP6)
- BP for EHS 50.1 (plus patch for EP6)
But with those iViews you cannot create/modify/delete any elements. You can just display information on the elements.
So my questions are :
- How can I implement iViews for modifying module's elements?
- Does our SAP developers team have to make specific developments? Or does it already exist?
- Does BSP or Webdynpro ABAP applications already exist on the ECC6?
Thanks for helping me for those searchHi,
PLM 7.0 which came out with EhP4 is providing a WebDynpro user interface to material, document, BOM, change number.
This can be embedded in the NW Portal, NW Business Client or run standalone.
See this link: [http://help.sap.com/erp2005_ehp_04/helpdata/en/fc/30f52becb143aaa23aeecc5eb2cfcb/frameset.htm], incl. related Business Package.
Depending on which area of EH&S and EAM you are talking about, there are also WebDynpro based applications available already as far as I know.
Regards, Ulf.
Edited by: Ulf Petzel on Sep 8, 2010 4:19 PM -
Enterprise Asset Management(EAM)
Hello Friends
I want to know about Enterprise Asset Management(EAM) ,whether it is an SAP process ,under SAP which module it covers .plz guide me in this.
Regards,
KiranHello
yes it is an SAP process and is integrated package but mainly comes under product life cycle management
http://www50.sap.com/businessmaps/32C13E8009BB4598B2A499A6554E0E67.htm
http://www.sap.com/solutions/business-suite/plm/featuresfunctions/asset.epx
thanks
Bhudev -
Hi everybody,
I was assigned to build a software that can read Work Order related data from eAM and write some data back.
What way would you advise me to follow? Do I supposed to access tables directly? Can I use an API calls? Is there any developer tools I could use?
Any advice, suggestion, explanation, example or link is highly appreciated.
Oracle Database 11.5.10
Windows Server 2003
Thank you in advance.Have a look at the following notes/links:
Note: 377975.1 - Sample Script to Create Work Order Through Work Order API
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=377975.1
Note: 388523.1 - How to Calculate Work Order Duration Using EAM_PROCESS_WO_PUB API
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388523.1
Note: 377557.1 - Valid Transaction Types in Work Order Business API
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=377557.1
Note: 472456.1 - How To Call API WIP_EAM_WORKREQUEST_PUB To Update Work Requests
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472456.1
Oracle Integration Repository
http://irep.oracle.com
Regards,
Hussein -
Need API for EAM Active Association - Asset number and Asset Group
Hi
I am working in R12 and need api for EAM Active Association - Asset number and Asset Group to insert the new records.
If any one is aware please let me know API with sample script.
Regards
Suresh PAll APIs are listed in Oracle Integration Repository
http://irep.oracle.com/index.html
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
Technical Uses of Customer Interface and TCA-API [ID 269121.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
List of APIs and open interface R12
Re: List of APIs and open interface R12
Regard
Helios
Maybe you are looking for
-
I'm from Bosnia and Herzegovina and just recently started a IT StartUp Company with a great success. Now we have the requirements for tools like Adobe Illustrator, InDesign and Photoshop, but still as a StartUp, to buy the full licence is out of ques
-
Instructions for wirelessly connecting MBA to Panasonic smart TV
I have a late 2013 MBA and want to connect it wirelessly without using an Apple tv box to my Panasonic TX-L32E6B smart tv. Can anyone provide instructions for doing this?
-
Why can't Photoshop CS4 open/save as PNG?
I recently had to downgrade to CS4 and I've been having A LOT of issues with it. The biggest one being the inability to cooperate with PNG files. Online I've seen a few sollutions and I tried them all. I have PNG.8BI in my plug-ins folder in my Progr
-
External Data Transfer to FI-SL Using RGUREC00 - Is Plan Data Supported?
Hi, I copied standard program (RGUREC00- to load PLAN data into FI-SL ) to z program and changed as per the requirement from client but it dosen't work for 'PLAN Data', it works only for 'Actuals'. Is there any other program to load PLAN data ? Pl
-
Larger Pictures from iWeb photo album
Hello, I have created a photo album through iweb but when I click on the photos I have a bar with all the photos one next to the other and the one that I chose is larger below. I need to have the chosen picture in a larger scale as the default is qui