BI EHP1 Disk space assumption

We do not have proper inputs for BI sizing right now , as an average assumption for data storage size with EHP1 we are considering the disk space as follow on Windows 2008 with Oracle.
BI DEV : ABAP SID and JAVA SID on same box : 200 GB
BI QAS : ABAP SID and JAVA SID on same box : 400 GB
BI PRD : ABAP SID and JAVA SID on same box :550 GB
At BI DEV and BI QAS we are planning to have EP in future also..Please advice if you feel the disk size is quite less...considering the EHP1 ...
i have read in note that EHP1 will take 50 GB of space ...?
Regards
Edited by: indian tiger on Jul 13, 2010 2:10 PM

please advice..
Regards

Similar Messages

Where Does Yosemite Installer Hide? (aka missing disk space)

I've been using a 400GB partition on an external drive for Time Machine backups for some time and it's had plenty of room to work with. I upgraded to Yosemite recently and all was well with the Time Machine backups.
Yesterday I downloaded Yosemite again to install it on a second drive so that I would have a second bootable drive. Today I got notice that there was not enough space on my Time Machine backup drive. Suddenly the 400GB was not enough and my primary boot drive had swollen to 480GB. I don't know what it had been, but obviously there is now a lot more on it than there was.
My assumption is that I have the Yosemite Installer and/or hidden installer files that didn't get cleaned up after the second installation. I can't find anything in hidden files or folders that I recognize as such but soemthing is eating up lots of disk space that I need to free.
Where does the App Store stash downloads in case that's it?
If I hold Option on a restart, I no longer have the Installer as an optional boot disk, but I do get three "Recovery-10"... disks. Possibly those are the problem, but I can't locate them either.
Any ideas would be appreciated.

Ok, I may have found a possible solution. I found this at stack exchange. It's not the best option and it requires a simple shell command, and will not be able to be used to restore from Time Machine, but for backing up one or more directory, at least in the short term, this will work. Here it is:
There seems to be an issue with Yosemite renaming the computer local host by adding (#) after the computer name. There are other reports of this happening in a thread on MacRumors Forum and I believe a few people have blamed this as a cause of time machine backup failures. I've tried a few of the suggestions in the thread but so far none have worked. I've stopped using time machine for now and reverted to an old bash rsync script.
A really simple solution is to open the terminal and type:
rsync -avu ~/ /Volumes/backup_disk/backup_folder
replacing 'backup_disk' with the name of your external hard drive and 'backup_folder' with the name of the backup folder i.e.: 'yosemite_backup'. The three flags -avu mean: archive (a) copy the home directory recursively into sub folders, verbose (v) print to the terminal window everything you are copying (feel free to leave this out) and update (u) will only overwrite files that are newer than the archived file (useful after the initial main backup). This solution isn't as hands off as time machine but at least it's a simple way to back up vital information in Documents and Pictures/Videos.
Hope this helps!
to read the full discussion go to http://apple.stackexchange.com/questions/151662/os-x-yosemite-time-machine-ident ity-of-the-backup-disk-has-changed

I am not able to update iTunes keeps popping up message saying no free disk space I checked and there is enough to support the upgrade but I cant figure out why it wont let me. Help anyone!

So heres the deal, I updated my iphone and in order to put any music on it or even ringtones I have to have the most updated version of iTunes, unfortunately my macbook wont allow the update, I do have a lot of pictures and song stored on here but I have no documents I have deleted everything the only thing left on here is what the macbook came with. I checked and it says that I have enough memory so is there another reason I cant update. When I try and check for the update option in iTunes it says its up to date but I have version 10 something so I know its old, I haven't been able to update anything on here. Do I have to take it to the store or is there something that I can fix on my own because my warranty is up and I have nothing but problems when I go into an actual apple store.

If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

Low disk space in recovery disk (d) drive in window 8.1

I continue to receive the subject warning. I have never added any files to D, but I have 32.3 MB free of 25.5 GB. I have Administrator privilrges but am unable to view the files on D. When I click on recovery, I get an HP warning.

Hi @pjd10
I grasp that you are a low disk space error on recovery D. I regret that you are having that difficulty.
Here is a link to HP PCs - Error: Low Disk Space. You are running out of disk space on Recovery (Windows 8) that should guide you to resolving this issue.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
Thanks!

I think I narrowed this down to having a network volume mounted with a share name of "Users". The strange thing is even you if unmount the volume you will still have problems. However, if you avoid mounting the volume entirely (from boot) it will be OK.
The solution, it appears, is to rename the sharepoint to something other than "Users". This worked for us. I'm not sure if it matters whether the server is Windows or Mac OS. In our case the sharepoint was an AFP volume on Mac OS.
We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/..... which made no sense at all. However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
So, another possible solution could be to grant file creation rights on the network volume "Users". Another not-so-great idea.
Hope that helps someone else!

OraRRP Error with "Unable to copy data file;Error code 2, check disk space"

Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.

Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel

Insufficient Disk Space: What do I do? I do not want to delete all of my projects. If I delete them and then empty the trash it will free up some space but I have deleted way more than I am tryig to import.

I keep getting a message when I try to import pics. Insufficient disk space. What do I do? I do not want to delete all of my pics!

Easiest thing to do would be to buy an external hard drive and move your Aperture library to that drive.

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

Disappearing disk space Windows Server 2012 R2 with SharePoint Server 2013 Enterprise

I've got an interesting problem with a virtual machine in our VMWare environment. It is Windows Server 2012 R2 with SharePoint Server 2013 Enterprise installed. I started out with a 60GB disk and it started running out of space, so I increased
it in VMWare and extended the partition to 100GB. Well, that lasted for a bit and so I extended it again. I've done this 3 or 4 times and now I've got a 160GB disk with about 2-3GB of space remaining (and it started with 10GB remaining).
WinDirStat shows 105GB of <Unknown> space being used, which is probably my issue. However, I can't determine what this is and it keeps growing like a tapeworm. The context menu on the <Unknown> files has all the options disabled,
so WinDirStat doesn't appear to have access to whatever the file(s) is/are. I've performed several chkdsk /f on the C: drive and nothing bad is reported. I don't have any restore points and am not running VSS (that I'm aware of). The pagefile
reports as being about 4.9GB, so that's not the issue. No large files are shown anywhere and my explorer settings are set to show me all files, including system files.
When I try to run WinDirStat with elevated permissions, it hangs and becomes unresponsive.
I've even resorted to running CCleaner to see if it found anything, but it simply found the standard temp files and such...about 1GB.
I'm pulling my hair out...and I don't have much to start with. Anyone have any ideas?
Thanks
Russ

It appears that somehow, Microsoft Fusion Assembly binding logging was turned on and many of the temp folders located at c:\users\username\AppData\Local\Microsoft\Windows\InetCache\IE were filling up with hundreds of thousands of Fusion HTM log files.
This is controlled by an entry in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion\ForceLog which was set to 1. Hopefully, setting it back to zero will fix the issue. As a result of figuring this out, I have recovered almost 80GB of disk
space occupied by the log files.
I thought WinDirStat would show me what I needed to know, but it turns out TreeSize (which I've used in the past) works much better.
Russ

CSCul50066 - Upgrade fails due to lack of disk space in the /common partition

I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein. These (the bullet points below) seem to be the salient options contained in that section. I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade. I found the .cop file in the following download area on CCO:
Downloads Home
Products
Unified Communications
Call Control
Unified Communications Manager (CallManager)
Unified Communications Manager Version 10.0
Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
It is called: "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild.
ciscocm.free_common_space_v1.1.cop.sgn "
• Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
to their original values in order to avoid premature purging of traces. The default value for the high
watermark is 85. The default value for the low watermark is 80. For more information about using the
Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
Guide.
• Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
review the Readme file that supports this COP file before you proceed.
• Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
COP file removes the inactive side in the common partition to increase available disk space without
requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
you proceed.
• Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
files using the TFTP File Management page in the OS Administration interface, or you can use the file
list tftp and file delete tftp commands from the command line interface.

I noticed this has only 1 and 2 star ratings after bumping into this issue myself, so I figured I would help out the original poster and others who are experiencing this issue.
Presumably, the original poster is intending to advise that we read the CUCM 10.0(1) Upgrade Guide, and view the Pre-Upgrade Tasks therein. These (the bullet points below) seem to be the salient options contained in that section. I used the "Free Common Space COP file" option to resolve my disk space issue and allow my upgrade. I found the .cop file in the following download area on CCO:
Downloads Home
Products
Unified Communications
Call Control
Unified Communications Manager (CallManager)
Unified Communications Manager Version 10.0
Unified Communications Manager / CallManager / Cisco Unity Connection Utilities-COP-Files
It is called: "VMware Disk Size Reallocation COP file: This COP file allows UCM VMs to increase the size of their vDisk(s) without requiring a system rebuild.
ciscocm.free_common_space_v1.1.cop.sgn "
• Use the Cisco Log Partition Monitoring Tool to adjust the low and high watermarks to reduce the traces
and remove unnecessary log files. Cisco recommends that you adjust the low watermark value to 30,
and the high watermark value to 40. After the upgrade, you must restore the high and low watermarks
to their original values in order to avoid premature purging of traces. The default value for the high
watermark is 85. The default value for the low watermark is 80. For more information about using the
Cisco Log Partition Monitoring Tool, see the Cisco Unified Real-Time Monitoring Tool Administration
Guide.
• Use the Disk Expansion COP file (ciscocm.vmware-disk-size-reallocation-<latest_version>.cop.sgn) to
expand the vDisk size if your virtual environment has additional available disk space. Ensure that you
review the Readme file that supports this COP file before you proceed.
• Use the Free Common Space COP file (ciscocm.free_common_space_v<latest_version>.cop.sgn). This
COP file removes the inactive side in the common partition to increase available disk space without
requiring a system rebuild. Ensure that you review the Readme file that supports this COP file before
you proceed.
• Manually remove outdated or unused firmware files from the TFTP directory. You can remove these
files using the TFTP File Management page in the OS Administration interface, or you can use the file
list tftp and file delete tftp commands from the command line interface.

How to restrict disk space when using time machine for client backup on server?

We have 10 OS X SL Clients backing up on xserve SL with TM. Now 1 TB disk space is used and disk is full. The clients get the massage that the latest backup could not be finished due to target disk full. Clients run just OS X Standard Software plus Parallels with windows (max. 50 GB per client)
Why does TM not delete oldest backups like with external USB HD?
How can we restrict disk space on server to eg. 750 GB for total backup space for all clients?

johndave, did anyone ever respond to your post?

How can I delete event files from iMovie to save disk space?

I have been shooting a lot of HD video of my son's soccer games and am now realizing some of the problems with the newer iMovie 10. It appears to not allow for partial video deletion of videos in events (really too bad because previous versions of iMovie did this really well), And, sometimes it will not actually move the deleted file to the Trash to help free up disk space on the computer. This is also a problem because I have to did around in the View in Finder mode to find the events I just deleted in order to move them to the Trash manually. Yeegads! All of this said, what I appear to have happening is a huge amount of video that I never plan to keep (most of a 90 minute soccer game does not make it into highlights -- imagine that?) clogging up my hard drive. My poor computer needs to have a cholesteral check.
Any advice on how to manage large video files 40 minute HD files within (or outside) of iMovie 10 so that I can efficiently eliminate irrelevant content and actually delete files to prevent disk overload would be greatly appreciated. I am thinking about using iMovie 9 to edit down and delete the unwanted footage and then update the files into iMovie 10 for some of its bells and whistles any problems with that?
I must admit, I think iMovie 10 is a failure in certain essential ways. It dropped Keywords, its deletion is not true deletion, and it's all or nothing when deleting an event. I have always been a huge Apple fan, but this new release of iMovie 10 has not been a good user experience for me. I have read a lot of feedback from others with similar problems and issues with iMovie 10 and would really like to understand what Apple plans to do to address some of these defficiencies in what will hopefully be a much better next version.
Thanks for any help you can provide.

Hi PGWilli,
If you are satisfied with 8.0 then you shouldn't need 4.01 at all. As long as all your bookmarks and personal information are in the newer version, go ahead and remove the older version.

Problem with Photoshop CS5. Memory and Hard disk space Mac OSX

Just got CS5 Master Suite. Whenever I open photoshop it takes a ton of memory 1 gig +. When I open files it takes up more and more until it takes up all my memory and hard disk space. I open a simple multi layered file that is 25 megs in size to work on it. Before I know it photoshop is taking 20gigs+ of my hard disk space along with 3+ gigs of system memory. Is there a memory problem in photoshop cs5?
Thanks!
Joseph
UPDATE:
So I just opened the 25 meg file in photoshop cs5 and watched my free space on my hard drive go down 8 gigs the instant I opened it. It went from 27 gigs of freespace to 19 instantly. As I open more files and close others it works till my harddrive goes to zero space... stalls the computer big time. Only way to correct it is to quit photoshop cs5 and wait a few minutes for the space to return... and it takes a few minutes for it all to return.
I am running a Macbook Pro with OSX 10.6., 4 gigs of ram on board.
anyone else having simular problems?

http://forums.adobe.com/thread/681490?tstart=0
Maybe this thread offers some information.
And have you perused this page?
http://kb2.adobe.com/cps/404/kb404440.html

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********

Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5

BI EHP1 Disk space assumption

Similar Messages

Maybe you are looking for