BI Front end Bex analyser problem.

Hi ,
I couldn't able to open bex analyzer in BI 7.0.
My basis team has followed all steps,but i couldn't able to open BEX tool bar in BI 7.0.
I can able to create query in BI 7.0 .
Kindly suggest me .
thanks,
Vijay.

Hi Vijay,
The scenerio refers to GUI or Installation problems.
I suggest you to go through with these following SAP Notes:
1025122
1050605
also check your Front End installation as per Note 197460.
Regards
Vivek Tripathi

Similar Messages

BI7 BEx Analyser problem

Hi,
I am working on BI7. I have problem that I cannot open BI7 BEx Analyser, however I can open 3.X Analyser. On clickin for BI7 Analyser It say that 'Critical programm erroe occured, The programm needs to close, Please refer to the trace for further information'.
My question is, if I can open 3.X anayser, why I am getting error for BI7 Analyser.
Can some one please guide me resolve this issue.
For more details MS Office 2003 Patch 2
SAP GUI patch level 7.

Hi,
   Looks like a GUI problem, you'll need to install BI again.
Uninstall BI. and then do the following
Install the following softwareu2019s / patches before installing SAP FrontEnd.
u2022     .Net framework 2
[http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD-AAB15C5E04F5&displaylang=en]
u2022     Microsoft Visual J# .NET Version 2 Redistributable Package
[http://www.microsoft.com/downloads/details.aspx?familyid=F72C74B3-ED0E-4AF8-AE63-2F0E42501BE1&displaylang=en]
u2022     Install the the office Patch KB907417 if not present.
[http://www.microsoft.com/downloads/details.aspx?FamilyId=1B0BFB35-C252-43CC-8A2A-6A64D6AC4670&displaylang=en]
Then install BI7 frontend and BEX.
Install the BI patch .
Regards.

SapGui Front end Remote installation Problem

I use Sap Installation Server V8.1.0.153 (Compilation 4)
I try to instal a SapGui to remote PC.
   Remote -> Execute process Remotely -->Enter PC HostName (ex. C18140) --> Enter Application Name (ex. d:\sap_inst\Setup\NwSapSetup.exe /Silent /Product="SAPGUI710", copy line from SAPGUI710 package)
Select Execute to running the command and I received this error:
Executing D:\sap_inst\Setup\NwSapSetup.exe /Product="SAPGUI710" on C18140, please wait...
Failure in executing D:\sap_inst\Setup\NwSapSetup.exe /Product="SAPGUI710" on C18140. Check parameters, credentials and verify if the Windows workstation is running!!
For testinf purpose Clic on Display running process and select display (other screen) --> work OK.
I suppose the problem is related to my environment, but I really don't know if exist some tools I can run to diagnoste this problem.
Someboby can help me.

when i gave c:\program Files\SAP\sapsetup\NWsapsetup.exe /silent/uninstall/package="sapgui7.10" for uninstall the frontend in the client PC
As you suggested i collect the logs....
here i mentioned the Nwsapsetup.txt logfiles
15:21:03 NwSapFeiKr 2   SAP Frontend Installation Kernel initialized
                        (Unicode Release build)
15:21:03 NwSapsEngn 1   SapSetup Workstation Engine Library Loaded
15:21:03 NwSapSetUI 1   SapSetup UI Library Loaded
15:21:03 NwSapsAtlC 1   SapSetup ATL Common Library Loaded
15:21:04 NwSapSetup 1   Wait on registration Threads returned 0
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapFeiKr.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapFeiSh.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupAtlCommon.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupUi.Dll
15:21:04 NwSapSetup 1   SapSetup has successfully registered: C:\Program Files\SAP\SapSetup\setup\NwSapSetupEngine.Dll
15:21:04 NwSapSetup 1   Registration Activity took 1.651489 seconds
15:21:05 NwSapSetUI 1
15:21:05 NwSapSetUI 1   UI: Show Splash Screen
15:21:05 NwSapSetUI 1   Constructing a new UI Manager Object
15:21:05 NwSapsEngn 1   Engine: Initialize()
15:21:05 NwSapsEngn 1   Initializing the Installation Engine
15:21:05 NwSapsAtlC 2   Variable 'APPDATA' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'CommonProgramFiles(x86)' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'HOMEDRIVE' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'ProgramFiles(x86)' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'PUBLIC' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'LOCALAPPDATA' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'ProgramW6432' not available on this system
15:21:05 NwSapsAtlC 2   Variable 'CommonProgramW6432' not available on this system
15:21:05 NwSapFeiSh 1   Trying to load 'C:\Program Files\SAP\SapSetup\setup\vbscript.dll'...
15:21:05 NwSapFeiSh 2   Library not found on installation source, searching local folders...
15:21:05 NwSapFeiSh 1   "C:\WINDOWS\system32\vbscript.dll" successfully loaded.
for your views....

SAP Gui 6.40 BeX Analyser problem (Run Time Error)

Dear All
Really need some help
We get the following error in EXCEL 2003 when running transaction rrmx from SAP easy access:
Run time error 91 Object variable or with block variable not set
When debugging we get the following error message:
call pAddin.SetConnectionFromHandle(p_connectionObj).
We've rolled out the same package globally to all our users, some machines have this problem and some don't - which has been making this very difficult to resolve and troubleshoot.
We've tried patch level 29 of the GUI and this did not resolve.
I've read lots of threads relating to the .net framework and made sure all the service packs are installed, and also tried .net framework 2.0 and 3.0 - the problem still existed with both.
I'm really stuck and appreciate any guidance.
If we manually launch Analyzer (SAP BW 3.x) from the start menu, EXCEL and the BW add-in works fine... we only get the run time error when using transaction rrmx from SAP GUI.
Please help!
Thanks.

OK, so I've done the following - which DID work and i no longer get the RUN TIME error:
-uninstalled SAPGUI
-uninstalled Office 2003
-uninstalled all .net framework versions + updates.
-install .net framework 2.0 with SP1
-install microsoft office 2003 + SP3
install sap gui 6.40 + patch level 29
However, if anyone out there has got an easier and quicker solution to this problem I'd REALLY appreciate it. I have got lots of our users with this problem and it took a long time to complete all the steps above.. there must be something easier to do to fix this...
thanks for your help

BEx in Windows Xp Front end

We have BW ver 2.1.
Recently I have upgraded my Front end from Windows 2000 to Windows XP. Now not able to run BW from Business Analyzer short cut.
When I click its hang up & show not responding in Task manager.
What could be the reason.
Kindly help urgently.

Hello Anupma
Try to go via the start menu.
do not use the shortcut
Start-programs-sap front end-bex analyser.
bye meps

Front End not reflecting previously deleted entry while entering into Staging table

Lets say I have table named 'Sales' as my Source. It contains columns Sal_ID and Sal_DESC
There is Front End Entity created as Master Sales in Model Project. According staging table in database is ' stg.Sales_Leaf '.
Now, I have entered data into stg.Sales_Leaf from Sales table for 'CODE' and 'NAME' value as Sal_ID and Sal_DESC, and my ImportType is '0'.
As Sales table contains 23 rows, these are imported to stg.Sales_Leaf with ImportType '0'.
I am able to see it in Front End also.
Problem starts now. I delete some rows from Front END directly which contains CODE value as 22 and 23.
These gets deleted from Front End View, but now again I load Same 23 rows to stg.Sales_Leaf with same data (after truncating it).
I should be able to see 23 records in Front End, but it is showing only 21 records.
Two records with CODE value as 22 and 23 are not reflecting in Fornt End.
I think it is because 'mdm.<table_code>' table associated with stg.Sales_Leaf, is reflecting Status_ID as 2.
Please provide the way, how can I get data reflected in Front End.

All error numbers between -20000 and -20999 are not Oracle errors but rather application errors coded by whoever wrote your software.
As previously suggested ... see your DBA or manager.

BW front end patches

Hi ,
Can any one let me know how to(steps) apply BW front end pacthes (Analyser) .
Thanks
Gururaj

Hi Gururaj,
First check if you have a "Apply Patch" in the SAP folder of the start menu. If so you can use the ".car" file and apply the patch.
In case you dont find it then you can download the patch as a ".exe" from http://service.sap.com/swdc. Execute the ".exe" and install the patch.
Bye
Dinesh

BEx front end version problem

Hai everybody,
I am trying to edit an existing query. When I open the query designer( from excel sheet) I am getting the following error message is appearing.
The component was edited with a more recent version of the editor. You also have to use the more recent version further. Further processing not possible. Update your fron end"
There is only "ok" and when I clik on ok, the designer closes.
What does this mean? Is it taking about BW version or what is it? I have it edit the query but its not letting me to. Any help is highly appreciated.
Thank you very much.

Hi Visu,
somebody has developed the Query you are trying to modify with a newer Front End Version. So you need to have the same or higher Release / Patch Level.
To download Patched go through:
http://service.sap.com/swdc -> Download -> Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> ...
Hope it helps
GFV

BEX Front end issues in sap netweaver 2004s

We have problems with accessing SAP NETWEAVER 2004S BEX tools(BI7.0).
We have the following softwares installed:
SAP_BW SAP NETWEAVER BI7.0 SP 10(SAPKW70010)
SAPGUI6.40 PATCH LEVEL 22
Microsoft office 2003
.NET version 1.1
Microsoft VJ# 1.1 Distributable package
We are having the following issues in each components:
1.BEX ANALYZER:Unable to open the reports.Getting the error message that
"Critical error occured.Program needs to be closed.Refer the trace file"
2.Report Designer:component Bex Report Designer avilable verion 59, Version 132 required.Before you can continue you have to run the front-end setup"
3.BEX WAD:Unable to save any web templates.Getting the following error message.
"E002 Error While Executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1()"
In BI front end check tool for PC not showing any red files.But it showing Blue color for some of the microsoft dll's.
Please help us with your inputs..
thanks in advance
Soujanya

Hi Soujanya,
This is known issue in BEx tools in this latest release.
We got the same problem and still facing.
We are using BEx 3.5X to access all reports.
Install BEx 3.5 too. Then you get two sub menus to access BEX tools.
Make sure that you open reports in 3.5 BEx Analyser.
I think all reports, which you tried to open in BEx(BI 7.0) are corrupted. try to copy to your datatargets/install (if they are BI Content Reports).
Good Luck,
Anand.
Pls give points if this is useful

Problem in Front end with BW3.5

hi friends,
now I am using BI 7.0 with front end BW3.5, it looks good. when i open the BEx, it didnot work...I think there is a component missing... If i use BI 7.0 as front end, I know that will be work.... I want to call BEx from citrix environment.... how can i find what component is missing, and how can we solve this problem...
I want to get solution with BW 3.5 front end... please guide and help me....
with hopes,
Jaya
Edited by: jaya durai on Jul 24, 2008 3:41 PM

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

BI 7.0: Report Designer / WAD Front-End Problems

Hi, We are on SAP Netweaver, BI 7.0 SP05, Stack01.
I have installed New SAP Front-End GUI Components,I dont have any problems executing queries in Web or BEx using Business Explorer 3.X.
I'm getting following errors when i try to execute with new version of Business Explorer.
1) Report Designer: Query XML is empty (BICS), please check query and portal setup.
this query works fine in BEx with New version as well.
2)Web Application Designer: "E002: Error while executing service RRXWS_WEBPUB_CALL_SERVICE:V for object 1()".
I couldnt execute simple web template in browser, when i click execute in browser, it open my local windows SAP directory.
Is there any setting or configuration files i should change?
i searched in OSS notes for these kind of errors, but i couldnt not find any
please let me know as its urgent.
thanks in advance..
Deepak Kunavarapu

Hi,
we're running NW2004s, BI 7.0 SP06.
I'm now testing the new Frontend-Tools and started with the Query Designer. Installed Patch 2, Revision 227. I created an new query and saved it. So far so good. After executing i get this error message:
iView not found: pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex.
Exception id: 11:02_16/02/06_0017_46228450
See the details for the exception ID in the log file
Do I need the integrate an platform_add_on? Does someone get the same errors?
Thanks in adavance.
Benjamin Herrmann

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

Front end problem

<B>hello
</B>
<BR>
i have a simple question .as all of us when make a small application that is accessible over the web has two parts(always).one is for all users of this site and other only for administators.
front end accessible over the web is jsp page(in my application).my question is ,is it more appropriate to design the front end for adminstrators using java components.like by using javax.swing package or it must be the jsp page in which beans are used or applet. i have a confusion in the usablity of these as i want to design interface for admin usind swing components.
which approach is better and why ?plz expalin ur answer also. waiting for reply inorder to design my application. thanX.

I would choose jsp/servlets with login protection for admins only. I would choose that, because I like to program, but like to do things fast. With applets or stand alone java applications, I would have to code the client server communication and still have to code some login protection. Also you are less likely to run into firewall problems when you just use port 80 and http like the users do.

IP - Various problems with BEX Analyser - help would be nice

Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD                                               1       EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME           1      AG10_COPY01
DATA PROVIDER_FILTER                 1     DATA_PROVIDER_1
VAR_NAME                                     1       PROF_CTR
VAR_VALUE                                    1       510
VAR_NAME                                     2     PERIOD
VAR_VALUE                                    2        012
VAR_NAME                                     3       CUSTOMER
VAR_VALUE                                    3     1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
D

Dear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer

Button in Bex Analyser 7.0 - problem with setting up Static Parameters

Hello,
I know a similar problem has been discussed here already, but I am still having problems with setting up Static Parameters of my Button in BEx Analyser 7.0, so that I can pass Variable values from that button to my query.
This is what I do - in Static Parameters of my Button I set the following values:
Name                          Index          Value
DATA_PROVIDER        0               DP_1
CMD                             0               PROCESS_VARIABLES
SUBCMD                      0               VAR_SUBMIT
VAR_NAME                 0               0RMA_FIP
VAR_VALUE               0               004/2010
As a result, I would like the value 004/2010 to be passed to variable 0RMA_FIP (which is mandatory) and the query to be executed with that value. For some reason, however, the value is not passed correctly, and instead the variable is filled with a blank or not filled at all, and I am getting a message "Specifiy value for variable Fiscal year/period". What do I do wrong?
Just to give you a broader picture - I would like to later use this logic to pass more than one variables into a query, including a hierarchy node, and read the values from an Excel worksheet - however, after many attempts to do so, I started playing with just one variable to figure out what the problem was.
I have already seen the following two threads and SAP notes on passing variable values from the button:
Re: Button in BEx Analyzer 7.0
Re: How to set variables values via VBA.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
Can anyone please advise?
Cheers,
AL

I managed to figure it out myself!
Instead of VAR_VALUE I need to enter VAR_VALUE_EXT, and it works fine.
I will mark this thread as "answered".

BI Front end Bex analyser problem.

Similar Messages

Maybe you are looking for