Bi general settings and img or spro settings
Hi experts,
I am working in bi for preparing bex reports in previous projects.
Now, I am woking in new implementation project. I have blank server.
What are the steps to start the new server settings in bi 7.0?
I know the connection settings for sap r3 data sources and global settings, loading process.
I want to know about other settings like in spro what are the setting to be done for implementation and general settings.
my source system is r3 only.
Regards,
Dharani
Pathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM
Similar Messages
-
Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
I cant seem to disable the Subtitles. I have tried on the iPad Settings and on the ATV settings, NOTHING!!
If they are actually rendered in the video then you can't turn them off. They are part of the image. That is controlle by the copyright holder. You can only turn them off if they are done as captions.
-
IMG or SPRO Settings for BI in CRM
Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
ThanksPathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM -
Foreign currency settings and cross company code settings
Hi
Any one can send me the configuration documents on foreign currency settings and cross company code postings.
Regards
Shilpa.Foreign currency settings - OBBS: Define translation ratios
OB08 - Maintain exchange rates
You can read the relevant IMG help for this.
Cross company code: OBYA - read the IMG help for this also.
Regards, -
Document raster effect settings and Gradient mesh resolution settings...
Hi,
I need to set Document raster effect settings and Gradient mesh settings as high resolution in Illustrator 10.. Dont no which header file and suites have to use?
How can i get and set the value of both Document raster effect settings and Gradient mesh settings?
Pls guide me...I found Raster resolution values in AIDocumentList.h header file. Raster Resolution values is inside of the AIRasterResolution struct. This AIRasterResolution struct is inside of the AINewDocumentPreset struct.
Dont know how to get and set that Raster resolution of a current document? Pls someone help me. -
Client based settings and non-client based settings
Can I knwo what is the client based settings and what are the non-client based settings.
Hi,
Slight error in you question:
There are 2 settings:
1. Client specific: These are customising settings which impact only in the client you are making the changes in. Let us say that in an instance you have 2 clients, 800 and 900. When you change a client specific setting in 900, it is not reflected in client 800. This is beacuse the table where this setting is stored contains the client as one of the fields.
2. Cross Client settings: Here, a change in one client is also replected in all the clients in that installation. Needless to say, the tables for these settings will not have client as one of the fields.
Cheers -
Disable/alter nano6 sleep settings and/or motion detector settings?
I'll try to be brief.
I just received my nano 6 which replaces my, evidently worn out, nano 4. I use my nano specifically in my car. My nano 4 worked great in the car and generally was always "online" or usable whenever I started the car.
The new nano 6 doesn't have the same connectivity to the car as the 4, i.e. every morning I have to open the trunk to "enable/turn on" the ipod in order to use it. In the course of a day, 50% of the time I need to open the trunk to power it back up.
My belief is that my problem w/the nano 6 is either/both:
1. Either the sleep timeout settings have changed between (not surprisingly) between the 4 and 6 models.
2. Maybe the motion detector/sleep feature in the 6 is hanging things up.
Either way can I can somehow alter the settings in the 6 (iTerm?) or should I just return the 6 and track down a nano 4 or 5 as a replacement.
Thanks for any suggestions.I'll try to be brief.
I just received my nano 6 which replaces my, evidently worn out, nano 4. I use my nano specifically in my car. My nano 4 worked great in the car and generally was always "online" or usable whenever I started the car.
The new nano 6 doesn't have the same connectivity to the car as the 4, i.e. every morning I have to open the trunk to "enable/turn on" the ipod in order to use it. In the course of a day, 50% of the time I need to open the trunk to power it back up.
My belief is that my problem w/the nano 6 is either/both:
1. Either the sleep timeout settings have changed between (not surprisingly) between the 4 and 6 models.
2. Maybe the motion detector/sleep feature in the 6 is hanging things up.
Either way can I can somehow alter the settings in the 6 (iTerm?) or should I just return the 6 and track down a nano 4 or 5 as a replacement.
Thanks for any suggestions. -
What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
My iPod Touch 5 brightness suddenly turned dim but when I go to my brightness and wallpaper page in settings it is at the middle (Normal Brightness). Is this a bug in ios 6 or something?
If the reset does not work I would try the following before going to Apple
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have a iPod touch 5 generation and I've reset my settings to it and I need help fixing it any help would be very helpful. If you know what's wrong with it please email [email protected]
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Other users have had the same problem.
Apple Retail Store - Genius Bar -
My iPhone 5 does not allow me to send or recieve any texts from anyone not using iMessage - I've already checked my settings and everything is where it should be. Any other possible ideas?
Contact your carrier to make sure there's nothing wrong with your account.
Also, it may be worth going into Settings>General>Reset and choosing Reset Network Settings. You'll lose saved wifi passwords but you won't see any other changes. That may resolve the issue.
~Lyssa -
Since late September my emails stopped arriving on my iPhone. Access to the internet via Safari now only ends in a message "Safari could not open the page because the server stopped responding" I don't recall changing any settings and have checked the settings many times to try to figure out whats happening but without success. Ideas anyone?
ThanksThis may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is preventing the backup from succeeding. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup. -
I would appreciate any help I can get. I was just messing around with the general setting on the ipad (64GB 3G...1st edition ipad), and did not realize that if I went under the general settings and changed the option to turn "on" the voice over, that it would require a double click on everything automatically. I have my ipad set up to lock after 2 minutes on non-use, and when I tried to sign back in, it said that my 4 digit passcode was incorrect. Then I tried to double click on each number, and that didn't seem to work. The numbers 1-9 seemed to input ok, but a zero seemed to throw it off. I have no idea if it has anything to do with it, but any help on getting back in to my ipad, I would greatly appreciate it, and I will be turning off that stupid voice over off as soon as I can. I was just goofing off, and was not going to let it stay on permenantely, but I tried to go back under the settings immediately, and I couldn't easily find it, but if someone could help on just getting me back in....I would owe you a big favor!
Thanks......freaking out in Mobile, AL!!Touch or tap the field that you want to use/select and it should get a box around it ; then double-tap that field to activate/type it. Once you've entered your password you can do the same (i.e. touch to select, double-tap to activate) to gradually get into Settings > General > Accessibility > VoiceOver and turn it off.
So to enter your passcode you first need to tap the 'slide to unlock' button to hightlight it (it should get a box around it), then double-tap it to unlock it. Then for your passcode tap the digit that you want and it should get a box around it; then double-tap that digit to type it; and similar for the other three digits in your passcode.
The manual (http://support.apple.com/manuals/#ipad) also that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
Can anyone advise me how long does it normally take to reset while doing- settings-general-erase and reset all settings.It has already taken 4 hours and only the apple logo is being displayed yet. I am little bit worried if the operating system will not be restored.
Use the following steps to place your device into recovery mode. If the device is already in recovery mode, you can proceed immediately to step 6.
Did you do this?
Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPhone. When you reconnect the USB cable to iPhone, the device should power on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure the battery has some charge and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If none of these works, visit your nearest Apple Retail Store, Apple Authorized Service Provider or wireless carrier.
Cheers!
Maybe you are looking for
-
How can I copy all the files from my iMac to an external drive so they remain as 'regular accessible files'? I want to clean my dive
-
Just bought a new laptop, windows vista and it say gateway and my ipod touch not showing up
I just bought a new laptop, Windows vista to be exact, i downloaded the latest version of itunes and my ipod is not showing up ? Anyone can help me
-
Files and Streams in java -- How to display successive records
Hi, I developed an application in which I enter name and id in a gui. Each time I enter, the records are added in the sequential file. Then I have a button to open that file. It also opens. Then I have a button to read the records(which has name and
-
Different results in 10.2.0.1.0 and 10.1.0.4.0
Hi, For development we are using Oracle 10.2.0.1.0 and for production - 10.1.0.4.0. I noticed that this query: select extractValue(value(tt), '/St/@ss:ID', 'xmlns="s" xmlns:ss="s"') ss, extractValue(value(tt), '/St/@ID', 'xmlns="s" xmlns:ss="s
-
How to run report server in oracle 9i DS
hi.. can any 1 tell me how to run report server in oracle 9i DS i've installed oracle 9i DS, but don't know how to run report server. actually i want to run a report from my form on button press trigger.. some of the experts r tellin that 1st u check