BI Integration in Portal (Where to configure Port, problems with km-integr)

Hello,
I am new to BI and started to integrate BI into the portal or rather tried it.
When I open my Bex-Excel-Workbook and try to create a document (right mouse -> jump -> documents) an error occurs that the service is not reachable. This is because of an wrong port.
Could someone tell me where I can change the port that he is using when the portal is called out of excel?
Changing the port in the browser I am facing some other problems like (sorry I don't know how to translate it exactly):
Properties for the assignment couldn't be provided
Could not determinate repository for documents with this property typ
Error during open new document-dialog
Has someone an idea how to investigate this problem? could it be because of the wrong port and where to configure the port?
Thanks a lot,
Vanessa

Hi,
Please refer the below links for BI Integration in Portal
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a&overridelayout=true
http://help.sap.com/saphelp_nw04/helpdata/en/a3/7b583c2439e66fe10000000a114084/content.htm
http://www.sdn.sap.com/irj/sdn/nw-datamanagement?rid=/library/uuid/a5067965-0901-0010-6f8a-bbf0b7424283
Hope it helps you,
Thanks & Regards,
Ravi.

Similar Messages

Where to configure Business One with email system

in SBO 2005A there is an option to send email under Message/Alert Overview.
Wonder where can configure to integrate with Outlook in order to send the email from SBO, currently the emails are sitting in the 'Outbox' of SBO Message/Alerts overiew.
KC

You dont need to install MS outlook Integration, unless you wish to send the email via Microsoft Outlook.
You can send email simply by connecting the Mailer service in the SAP business Server suite manager to your exchange server:
On the SAP server (or where the SAP Businesss Server Suite Manager, or server tools, is installed) double click on the suite manager and select mailer (if this is not installed, go to control panel, add/remove programs and modify the server tools to include mailer).
In mailer, you will need to set the schedule (maybe to run every minute if you send many emails and your servers can handle an email request every minute)
then in settings enter the exchange server name,
then in connection set the SQL DB username and password,
and finally in the database option, select which databases you wish the mailer to be listening to.
then stop and re- start the mailer service and you should be away.
hope this helps.

Thunderbolt port problems with Hard drive

Hello guys, since I updated to Yosemite 10.10.2 I have a problem with port thunderbolt, to which I have connected a hard disk. When I turn off the hard disk with its button after pressing "eject", the hard disk turns off but also restarts the MAC. I tried to connect it to the USB3 and it works ok. This problem I had never experienced with the previous operating system. Some of you can help me? Thank you very much!!!! ;-)

I had problems with my hard drive and was able to replace it myself. I am not technical at all but was still able to do it. Go on line and you will find some sites on how to do this they are very good. It did not take long and I am using the Powerbook to respond to your thread. Good luck.

Help! Broadcasting error: port problem with message server

Dear all,
I have a problem with our broadcasting in BW7.
I've checked all the pameters in ICM, that is correct.
I used RSBB_URL_PREFIX_GET to check HTTP server host and port
settings, and also check for message server.
The port of message server is 8101, and for ICM is 8001.
In RZ10, they are set as:
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
When I use broadcasting, the port 8101 is taken, and the error message is displayed:
'Page cannot be displayed
If I change the port to 8001 in address, it works.
As the how-to guide for Enabling BW web functionaality after new installation, the port 8101 would be reset to 8001 automatically when executing.
But it doesn't work.
Do you have any idea?
Thanks a lot!
Juan

Hi,
I have modified PORT=80$$ to 8001, and 81$$ to 8101, but the error occurs always.
Could anyone help?
Juan

Voice Mail Port Problem with CUCM 8.5 and Connection 8.5

Hi im having a very strange problem witch the voice mail ports between a CM 8.5 and a Cisco Unity connection 8.5 , i configured them and they registered and all was working fine, however when i rebooted the servers the ports stayed in status unknown i tried resetting them both sides, re adding config both sides and nothing after hours of trying and deleting and adding the same config it worked again, however we have a power outage today and the same thing happened again status unknown and still i cannot get them to register again. Any ideas or help would be appreciated.
Thanks,

I'm not sure but it could be a DNS issue. Is DNS configured or are you just using IP addresses? Make sure everything is resolving correctly.

Solve this and you're a genious: Port problems with SRW2016

Equipment:
One SRW2016 fresh out of the box and set to factory default settings
One Dell Laptop running Windows XP
One custom network appliance running a full TCP/IP stack but limited to 10M half duplex.
Setup:
The laptop has a static IP address. The network appliance has a static IP address. The switch has the factory default static IP address. All three devices are on the same subnet.
The laptop is plugged into port 1 on the switch, and the network appliance is plugged into various ports as described below. The laptop is set to continuously ping the network appliance using the ping –t command.
Problem:
When the network appliance is plugged into switch port 2 I am unable to ping the device from the laptop. When I plug it into port 3 I get the same result. In fact I am unable to ping the network appliance on any of the switch ports EXCEPT for ports 7, 8, 15, and 16. As soon as I plug the network appliance into any one of those four ports, the pings are replied to.
My question is - why am I unable to communicate with the network appliance on any ports other then ports 7, 8, 15, and 16? What makes these four ports different then the others?
Other Notes:
I have a second Linksys SRW2016 and notice the exact same behavior.
I’ve also tried a Linksys SLM2008 8-Port switch and experience NO communication problems on any ports.
I’ve tried a hub and it works 100%
I notice that after trying to ping the network appliance on a non-working port, I can see the device properly listed in the ARP table on both the switch AND laptop. So I am unable to ping the device yet it somehow makes it into the ARP table.
Any help with this issue would be greatly appreciated.
Best regards,
Rob

Hi,
Thanks for explanation that not all ports are the same.
I've just had a similar issue with a Siemens C470IP ip phone. It worked fine with my Dlink 8-port DES3010F switch which I've just replaced with the SRW2016, and also when plugged into my Draytek 2820n ADSL router's LAN ports. I'm a bit disappointed that I happened to plug the device into port 3 and suddenly my monitoring showed that things were not working properly. I checked cables and then remembered that auto-negotiation sometimes can cause problems.
On the SRW2016 if I leave the port with auto-negotiate on I see:
                              Flow
Port   Enable   Link Spd/Dpx Ctrl
g3      ENABLE   UP    10H     Off
Yet inspite this pinging the device does not work properly. That is I get from ping:
64 bytes from 192.168.0.36: icmp_seq=431 ttl=128 time=7.357 ms
Request timeout for icmp_seq 432
64 bytes from 192.168.0.36: icmp_seq=433 ttl=128 time=8.956 ms
Request timeout for icmp_seq 434
64 bytes from 192.168.0.36: icmp_seq=435 ttl=128 time=5.920 ms
Request timeout for icmp_seq 436
Request timeout for icmp_seq 437
Request timeout for icmp_seq 438
Request timeout for icmp_seq 439
Request timeout for icmp_seq 440
64 bytes from 192.168.0.36: icmp_seq=441 ttl=128 time=9.242 ms
Request timeout for icmp_seq 442
Request timeout for icmp_seq 443
Request timeout for icmp_seq 444
Request timeout for icmp_seq 445
Doing the explicit configuration of 10Mb Half duplex as suggested does not help either. In fact it's worse as I get no responses from a ping and it does not make any difference if I enable flow control or not.
So must be the Siemens device? Well plugging into port 16 as suggested makes all the difference:
Auto negotiation works and the link comes up and works fine:
That is:
                Auto          Flow
Port   Enable Neg. Spd/Dpx Ctrl
g13      ENABLE   On   Auto    Off
g14      ENABLE   On   Auto    Off
g15      ENABLE   On   Auto    Off
g16      ENABLE   On   Auto    Off
and
                                Flow
Port   Enable   Link Spd/Dpx Ctrl
g14     ENABLE   DOWN -----   ---
g15     ENABLE   DOWN -----   ---
g16     ENABLE   UP    10H     Off
and ping shows what I expect:
64 bytes from 192.168.0.36: icmp_seq=353 ttl=128 time=5.918 ms
64 bytes from 192.168.0.36: icmp_seq=354 ttl=128 time=6.675 ms
64 bytes from 192.168.0.36: icmp_seq=355 ttl=128 time=8.052 ms
64 bytes from 192.168.0.36: icmp_seq=356 ttl=128 time=5.430 ms
64 bytes from 192.168.0.36: icmp_seq=357 ttl=128 time=6.763 ms
64 bytes from 192.168.0.36: icmp_seq=358 ttl=128 time=7.861 ms
64 bytes from 192.168.0.36: icmp_seq=359 ttl=128 time=9.996 ms
64 bytes from 192.168.0.36: icmp_seq=360 ttl=128 time=5.526 ms
64 bytes from 192.168.0.36: icmp_seq=361 ttl=128 time=6.374 ms
64 bytes from 192.168.0.36: icmp_seq=362 ttl=128 time=4.750 ms
64 bytes from 192.168.0.36: icmp_seq=363 ttl=128 time=2.305 ms
64 bytes from 192.168.0.36: icmp_seq=364 ttl=128 time=4.748 ms
64 bytes from 192.168.0.36: icmp_seq=365 ttl=128 time=7.279 ms
64 bytes from 192.168.0.36: icmp_seq=366 ttl=128 time=6.359 ms
64 bytes from 192.168.0.36: icmp_seq=367 ttl=128 time=6.536 ms
64 bytes from 192.168.0.36: icmp_seq=368 ttl=128 time=8.089 ms
64 bytes from 192.168.0.36: icmp_seq=369 ttl=128 time=8.797 ms
So why is this broken? Is it a firmware issue or a hardware issue? The firmware I'm using is I believe the latest though it looks rather old:
Boot Version:          1.0.1 (Date: 11-Jun-2006, Time: 18:43:59)
Software Version:      1.2.2b (Date: 28-Feb-2008, Time: 16:47:37)
Hardware Version:      00.03.00
If this affects me it's likely to affect others and I really wanted to buy the switch to add to the number of "managed ports" I have. This current behaviour is rather disappointing and I would have hoped that perhaps a firmware upgrade would solve this, or the documentation would be clearer that some devices do not work properly (auto-negotiation seems to be rather a troublesome subject). Is such a fix available?

COM-port problem with MSI BToes USB Dongle

I´ve had problem to get my Sony Ericsson T610 to work with my MSI BToes USB Dongle, so I tried to update my drivers. Now I have Microstar Bluetooth Software 1.4.2 build 10 but can´t get my Serial Port service to work. In Advanced configuration / Client Applications under "Bluetooth Serial Port" / "Properties", the only serial port I can choose is com0. Does anyone know how to fix this problem?
/Peter

Well, I think i´ve solved the problem. To get the com-ports to work I installed the software. Then I had a problem to get the phone to communicate with Sony Ericssons synk-software and outlook, but suddenly it worked and has worked since then. I have no idea what the problem was but now it works and I´m satisfied.
/Peter

Radius configuration(dot1x) problem with ios version 15

Hello all,
I upgrade one 3750x from version 12.2 55 to 15.0(2)SE7 and i see that some configuration must be changed
Warning: The CLI will be deprecated soon
'radius-server host xxxxxxxx auth-port 1645 acct-port 1646 test username name key 7 sharedsecret
Please move to 'radius server <name>' CLI.
I try to adapt the configuration but the 802.1x fails :
radius server RADIUS-SRV
address ipv4 xxxxxxxxxx auth-port 1645 acct-port 1646
timeout 15
retransmit 3
automate-tester username name (username created in global configuration mode)
key 7 sharedsecret
aaa group server radius RADIUS-SRV
server-private xxxxxxxxxx key 7 sharedsecret
ip radius source-interface VlanX
aaa authentication dot1x default group RADIUS-SRV
aaa authorization network default group RADIUS-SRV
Here's the configuration for the interface with an IP phone connected :
authentication event fail action authorize vlan 1
authentication event server dead action authorize vlan 1
authentication event no-response action authorize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-domain
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation protect
no snmp trap link-status
dot1x pae authenticator
dot1x timeout tx-period 5
On the logs, i have the server-dead result (not the message that the switch can't reach the radius server):
Apr 28 12:33:45.075: %AUTHMGR-5-START: Starting 'dot1x' for client (MAC) on Interface Gi1/0/1 AuditSessionID 0A175140000004640014346D
Apr 28 12:34:05.191: %DOT1X-5-FAIL: Authentication failed for client (MAC) on Interface Gi1/0/1 AuditSessionID 0A175140000004640014346D
Apr 28 12:34:05.191: %AUTHMGR-7-RESULT: Authentication result 'server dead' from 'dot1x' for client (MAC) on Interface Gi1/0/1 AuditSessionID 0A175140000004640014346D
When i put the old fashion config, the IP phone is authenticated without problems, see capture from the ACS server (attached file 802.1x-OK)
With the new configuration, see attached file 802.1x-NOK ; i don't have the same field in the ACS (username field) and i have the message 11036 The Message-Authenticator RADIUS attribute is invalid
Why the authentication doesn't "come" to the ACS like before with this new configuration? What i'm missing?
Thank you

Hello all,
I modify the configuration and now it's working :
aaa group server radius RADIUS-SRV
server-private xxxxxxxxxxxx timeout 15 retransmit 3 test username xxxxxxxxx key 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ip radius source-interface xxxxx
radius server RADIUS-SRV
address ipv4 xxxxxx auth-port 1645 acct-port 1646
key 7 xxxxxxxxxxxxxxxxxxxxxxxxxxx
aaa authentication dot1x default group RADIUS-SRV
aaa authorization network default group RADIUS-SRV
Regards

Ports problems with 10g XE

Hello!
I'm using Oracle 10g XE on Windows Server 2003, the installation was successfully realized.
The problem is that I can't access to the login page : http://127.0.0.1:8080/apex . I think that the problem come from a port restriction (but I'm not sure!) : the 8080 port is certainely blocked, but I don't know how open it ...
With Windows XP Pro, I had no problem ... ! Nevertheless I used the same anti-virus program with the same rules ... !
Can someone help me please, I'm loosing my hair !!
Thanks !

Hello!
I'm using Oracle 10g XE on Windows Server 2003, the installation was successfully realized.
The problem is that I can't access to the login page : http://127.0.0.1:8080/apex . I think that the problem come from a port restriction (but I'm not sure!) : the 8080 port is certainely blocked, but I don't know how open it ...
With Windows XP Pro, I had no problem ... ! Nevertheless I used the same anti-virus program with the same rules ... !
Can someone help me please, I'm loosing my hair !!
Thanks !

Acrobat 7.0 Printer port problem with windows 7.0?

I installed adbobe acrobat 7.0 standard on my new computer (windows 7.0), and I get this message: "warning 20225 adobe 7.0 ws unanle to setup adobe printer port." Does acrobat 7.0 work with windows 7.0?

If you are able to open Acrobat and Distiller, then you may be able to create a work-around. If the Adobe PDF printer was created, but not the port, then change the port to a "print-to-file" setting. Then open Distiller and setup a watched folder that you would print the file to. When you print the file, you may have to set the file extension to PS rather than the default PRN. The file would be a PS file and the extension is only to help the watched folder setup. Then try to print to the Adobe PDF printer and see if the watched folder will do the job. I am not sure and have not tried it on Win7 (I have AA9) but it is an option to try. If it does not work, then it is time to upgrade -- may be a good idea anyway.

64-bit, 32-bit Porting - Problem with file locking

Hi,
OS: Solaris 8
I am trying to port the existing 32-bit code to 64-bit. I am facing the following problem.
The executable works fine with 32-bit compilation, but fails with the 64-bit compilation. I am trying to lock a file, but it is failing with the errno = 9 [Bad file descriptor]
I have included the code. I would appreciate if some one can help me to solve this.
Many Thanks and Regards,
Srini
Please find below the compilation flags i used.
32-bit compilation:
cc -KPIC -Xa -mt -o coreflck coreflck.c
When i run the exe then the result is:
$coreflck
Done!!!!
64-bit compilation:
cc -KPIC -Xa -mt -xarch=v9 -o coreflck coreflck.c
When i run the exe then the result is:
$ coreflck
Error Occurred while locking errno:9
Done!!!!
Please find below the code (coreflck.c)
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/errno.h>
#include <malloc.h>
extern int errno;
int lock(
int fd,
int cmd,
struct flock *lcks
int op = 0;
int sts;
do {
sts = fcntl (fd, cmd, lcks);
} while (sts == -1 && errno == EINTR);
return sts;
int main ()
struct flock lock_struct;
int mode, junk = 0;
FILE *fp;
fp = fopen("/krb5/tmp/cc/krb5cc_1024", "rb");
memset( &lock_struct, 0, sizeof( lock_struct ));
lock_struct.l_type = F_WRLCK;
lock_struct.l_whence = SEEK_SET;
do {
mode = fcntl (fileno( fp ), F_GETFL, junk);
} while (mode == -1 && errno == EINTR);
if (mode == -1 )
printf("Error Occurred errno:%d\n",errno);
else {
/* If the file's mode is read-only then we
try for a shared lock; Otherwise, we
try for an exclusive lock. */
if( mode == O_RDONLY )
lock_struct.l_type = F_RDLCK;
if( lock( fileno( fp ), F_SETLKW, &lock_struct ) == -1 )
printf("Error Occurred while locking errno:%d\n", errno);
printf("Done!!!!\r\n");

I found the solution
I changed the line
if( mode == O_RDONLY )
to
if( (mode & O_ACCMODE) == O_RDONLY )
Since, if we use
F_GETFL
Get the file status flags and file access modes, defined in <fcntl.h>, for the file description associated with fildes. The file access modes can be extracted from the return value using the mask O_ACCMODE, which is defined in <fcntl.h>. File status flags and file access modes are associated with the file description and do not affect other file descriptors that refer to the same file with different open file descriptions.
Cheers,
Srini

Thunderbolt Port problem with (Late 2012) Mac Mini

I am connecting a (Late 2012) Mac Mini to an HP 2311xi monitor with a MiniDisplayPort-to-DVI-D cable plugged into the Thunderbolt port.
After the connection, the Thunderbolt bus Port Status in Systems Information states "No device connected".
However, the monitor works fine, just as well as when I am connected to the HDMI port (but without the blinking screen...).
The problem is that the TB port drops the video signal when I put the Mini to sleep. The monitor will not go into sleep mode (as it does with the HDMI connection) but flashes "No signal" which seems to wake up my Mini's hard drive. It spins up but there is nothing on the screen.
I'd appreciate any help on this, including the mystery of why there is "No device Connected" in Systems Information.
Thanks in advance.

I thought about your dilemma while ASC was down, that's good news your welcome!
I spent some of the time replacing the 320GB 5400rpm HD in my 2010 Mac Mini with a 500GB Hitachi Travelstar 7200rpm HD. Then moved forward by Restoring Mountain Lion onto it from an External HD, instead of Snow Leopard from the original 5400rpm drive. I really prefer to keep my music and photos on the Internal HD and so I couldn't justify the cost of a larger SSD.
So basically I flip flopped and now running Mountain Lion on a larger/slightly faster Internal HD and Snow Leopard from a FireWire External HD when needed.

Have MacBook Pro - Where do I fix problem with Mail Inbox posting duplicate messages?

Messages appearing in my inbox are coming in duplicates, and when I delete one it deletes both. Looked in Preferences but can't see anything to fix this. Thanks for any help

I don't know what the solution is, but I've seen this posted before. Just search the forums for "email with 1969 date" and you might find a solution.

PCI port problems with video card

I have been running 2 video cards (ati 9800pro and 7500) fine for about 2 months now. Over the weekend I came home to find the monitor with my second card garbled with black lines running up and down the screen, shifting left and right. Also, there was a problem with my promise controller (had a question mark next to it in device manager) I reinstalled that and it works fine now. My second card continues to give me problems though. Device manager picks it up and says that my card is working fine but in display settings my card does not show up. I believe it a problem with the motherboard as I have tried 2 nvidia cards with the same result. It is also not related to windows as if I change the boot config to load my second card first (pci) the black lines/wavy picture loads up with the msi screen and in the bios setup as well (totally unreadable). I've also made sure that my monitor is working fine. Any suggestions???? Thanks.
Ian

Well to tell you the truth, I don't like the sound of this ...especially since you said that you tried another card, and had the same result....Well I would first go into the BIOS and on the PNP/PCI page, check the Clear NVRAM to enabled..As this will reset all the PNP devices...See if that works ...Have you tried to switch the AGP/PCI initiation sequence in the BIOS? back and forth?...You can also see if there are any IRQ conflicts.(but you probaly did this allready)...You can also try to increase the PCI latency, If it is set to 32 go up to 64 and try...Do you have any other PCI cards with problems?...Have you tried a different PCI slot?.....Well maybee another member or moderator has some advice ...Let us know.....Sean REILLY875

Where to configure SMTP services .???

Hi Experts,
If you want to allow users to send e-mails outside the company domain using the portal. where to configure SMTP server settings in the portal for achieving this..? I need the path to configure SMTP services..

Vineet,
This wiki should help you to get started.
http://wiki.sdn.sap.com/wiki/display/EP/MSOutlookConfigrationguideForSAPPortal
Cheers!
Sandeep Tudumu

BI Integration in Portal (Where to configure Port, problems with km-integr)

Similar Messages

Maybe you are looking for