BI Integration Wizard not opening

Hi,
I have put the patches on EP7.0 from SP6 to SP10. Now there is a problem I am getting for BI in Visual Composer which is as follows:
After opening the Visual Composer, then I move through menu bar "BI" -> "BI Integration Wizard". Now a pop-up message comes as "WARNING 2003: Zoom the current diagram to the level of an iView or a service" with "OK" button. Now when I click on the button, the pop-up closes. So, I am not able to open BI Integration wizard.
Can someone tell me how I can open the BI Integration Wizard.
Regards
Deep

Hi Deep,
have a look into the WIKI:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/Connectivity">https://wiki.sdn.sap.com/wiki/display/VC/Connectivity</a>
There you find all the informations to setup a BI System.
Best Regards,
Marcel

Similar Messages

INtegration Repository not opening

Hi to all,
when am opening IR it will showing as unknown file type, and also it is saving a file as repository.jnlp , could you plz clear my problem ,

Hello Ravi,
Go through these blogs:
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
1) check the entries in the Host file for the XI boxes.
2) Check if the JWS has J2SE 1.4.2 installed.
3) check if the Cache contains comething for this boxes.
Thanks,
Satya Kumar
Reward points if it is useful..

Warning when trying to open BI integration wizard

Hi,
when i try to open the BI integration wizard, i get a warning " warning 2003 : zoom to the current diagram to a level of an ivew or source " and then the wizard closes.
Haradev

Hi Haradev,
Open the the 'BI Integration wizard' after drill down a iview. You can use Bi Integration wizard inside an iview. Try this.
Regards
Basheer

Portal integration with bo report was not opening from folders

Dear friend,
Please can u give me suggestion/solution on the following area, we are implementing business objects XIR2 portal integration with weblogic in which after login to business objects through portal report was not opening.
Regards
sekhar

hi,
please can you provide solution on this it is very urget purpose. i am able login to portal from portal when clicking on the report it was not opening.
regards
sekhar

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 and appears the apple with question mark...

Before partition by Boot Camp on Mac Book Pro With Mac OS Lion the computer restarts but not open wizard of Windows 7 install and appears the apple with question mark...don't recognize disk..

Apparently Zoo Tycoon can't be played on anything newer than 10.7.
https://discussions.apple.com/message/21885910#21885910
Roller Coaster Tycoon is available for purchase from the App Store.

Firefox will not open. I have uninstalled and reinstalled and the setup wizard didnt come up. Also Firefox still will not open.

my firefox was working fine till about 5 days ago and when i tried to open it up it would not. No matter how many times i clicked it. It would never open. I then proceeded to uninstall the program and then i redownloded it. I never got the set up wizard to pop up to finish. I have now tried to redownlod it again and still no change. I have the Icon on my computer but it will not open. Also I have even tried to uninstall it again and it will not uninstall. PLEASE HELP!!

Could you walk us through what happens when you try to open the iTunes Store, please?

Vision Acquisition Block does not open Wizard

Hello,
I'm trying to use the Vision Acquisition block but it just does not open the settings window/Wizard.
The block Vision Assitant opens normally.
However, if I open a .vi that had the Vision Acquisition configured, it compiles, but will not let me see their properties, settings, nothing. Also, if I double click on it to try to open it undoes the previous links. The LabView seems to try to load something, but in the end nothing happens. I have already reinstalled Vision Acquition and nothing. And the license is ok. In MAX, the camera that I want to access appears functioning normally.
Any suggestions?

Having the same problem. I am using the Student version of both. I can go into Vision from tools but when I place a vision acquisition block in vi nothing happens. Can not see properties etc.

BI Integration Wizard in Visual Composer Error

Hi Experts,
I try to run BI run BI Integration Wizard in Visual Composer.
It is displaying me an error
Warning 2005:There are no BI systems defined in portal.In order to use the BI Integration Wizard,You must first define atlease one BI system based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Before i contact my Basis/Portal team i would like to know what does it mean
Could you please update me what does creating a BI system in portal based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Thanks

Hi,
Yes ,Even you have the BI system in portal the Connector for
that sytem is RFC not Other connectors
you can check for the type of connector in the portal click on the system open its properties there you find the Connector type
go for connection properties option.
see for more details.
[https://www.sdn.sap.com/irj/sdn/wiki]
Regards,
Goivndu

VC Bi Integration wizard -

Dear gurus,
I saw another post which has a similar problem, but unfortunately it didnot answer my question, so i am opening a new one here.
I am trying to create a model for displaying BI data in the portal. I am able to see the queries in VC and even drag and drop them into the storyboard. But when I use the wizard it throws the below error message.
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector"
This is a BI integrated portal and we have no issues with publishing queries and web templates into the portal. They show perfectly as iviews. We have not implemented Single Sign on.
Now when I was looking at the sytems defined in the portal I see the following entries, and they were created / provided by SAP.
BI JDBC System
BI ODBO-Compliant OLAP System
BI SAP Query System
BI XMLA-Compliant OLAP System
EP 5.0 System
HTTP System
JDBC System
SAP system using connection string
SAP system using dedicated application server
SAP system with load balancing
Web Service System using WSDL URL
I am assuming that all these systems were already provided by SAP. Then why is the wizard still throwing the error. Was it configured or initially installed using the wrong system alias?
I have also activated the MDX editor, but that didnot help.
Landscape: EP 7.0 (Netweaver 2004s ), VC version 700.16.0.1
any help is appreciated, useful answers<=>generous points.

Hi,
As Our friend Told it Correct.
the List you showed is the List of Templates with which you can creat the Systesm in the portal.
But if you want to use any BI systesm through BI integration wizard the that BI system should be Configured using the One of the Connectors : BI XMLA ,BI JDBC ,BI ODBO ..etc
So to configure your BI as one of the above types then you will not get the Error you got.
To confiuge the BI system to use in BI wizard ,Please follow the Link
.HeatMaps with a Business Scenario.
in the above link look for the BI JDBC Systesm caretion
Govindu

VC Bi Integration wizard problem

Hello,
Am trying to create a model for displaying BI data in the portal.
We have portal and BI properly connected with logon tickets SSO and are also publishing webtemplates to the portal. But creating BI content using VC seems to involve a BI wizard and opening this gives an error that
"WARNING 2005: There are no BI systems defined in portal. In order to use BI integration wizard, you must first define at least one BI system based on the BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector"
How to fix this issue .
1)why is the system we are currently using (created in portal sys Landscape)for publishing templates not adequate here ?
2)which type of system should be used here ie java/xml/olap etc?
3)Is this the only way to create Bi content in VC for depolying on portal?
Sorry for too many qns ,but would really appreciate some explanation rather than links.
Landscape: Ep 7.0 , VC 7.0
Thank you
Rgds

Hi,
yes this Error is correct.
Beacuse the Bi system you ahd configured through the portal are done with RFC,JDBC connectors.
But to use a BI syetms in BI integration wizard the type of connector s should be BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Solution:
Chnage the type of connector in the portal for the BI sytems to one of the above connector then you are able to see the Systems
See the below link for configuration
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/6ca18a338344c8ae9dae2bb2a407c4/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/a6f6dae3224d50abca99051bb6e2b8/frameset.htm
Govindu

I have uninstalled and reinstalled and Firefox for windows 7 will not open. There is no error message--it just doesn't open, even in safe mode. What do I do?

My computer is set to auto update for Windows 7 Home Premium and for Microsoft Office Professional Plus 2010. I am also running Norton 360. There was a major update for Office on 12/10/14 that seems to be when my problems started. This month, every time my updates have caused a reboot, Mozilla has failed to open. I have uninstalled it and reinstalled it several times, and it has only lasted a day or two before it crashes again. This last time it will still not open. All the instructions to troubleshoot seem to be based on the idea that the program is open and just has issues. I can't even get it to open up in Safe Mode.
I have tried to reinstall, and it says that it will launch automatically when the install is complete, but it is not working. Since Norton scans every download before it runs, I'm not certain if that is where the problem is since I never get the window that shows the step by step installer for Firefox.
What do I need to do?

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. A clean reinstall is not the same as a regular reinstall performed using the built in installer. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org mozilla.org] (or choose the download for your operating system and language from [https://www.mozilla.org/firefox/all/ this page]) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING: Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Sunone console not opening after upgrade from DS5.2 patch 3 to patch 4

Hello,
The Sunone Console is not opening when i upgrade from Directory server 5.2 patch 3 to patch4. I getting the following error message
"error 501 Cannot logon because of an Incorrect userid,incorrect password or directory problem"
can u please guide me. how can i solve this problem.
Regards,
Srini

So while this certainly isn't the most elegant of solutions, and most assuredly isn't in the realm of supported by Oracle...
I've used the DBMS_IJOB.DROP_USER_JOBS('username'); package to remove the 194558 orphaned job entries from the job$ table. Don't ask, I've no clue how they all got there; but I've prepared some evil looks to unleash upon certain developers tomorrow morning.
Not being able to reorganize the JOB$ table to free the now wasted ~67MB of space I've opted to create a new index on the JOB$ table to sidestep the full table scan.
CREATE INDEX SYS.JOB_F1_THIS_NEXT ON SYS.JOB$ (FIELD1, THIS_DATE, NEXT_DATE) TABLESPACE SYSTEM;The next option would be to try to find a way to grant the select privilege to the role without using the aforementioned "after CREATE on schema" trigger and dbms_job call. This method was adopted to cover situations in which a developer manually added a table directly to the database rather than using the provided scripts to recreate their test environment.
I assume that the following quote from the 11gR2 documentation is mistaken, and there is no such beast as "create or replace table" in 11g:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/statements_9003.htm#i2061306
"Dropping a table invalidates dependent objects and removes object privileges on the table. If you want to re-create the table, then you must regrant object privileges on the table, re-create the indexes, integrity constraints, and triggers for the table, and respecify its storage parameters. Truncating and replacing have none of these effects. Therefore, removing rows with the TRUNCATE statement or replacing the table with a *CREATE OR REPLACE TABLE* statement can be more efficient than dropping and re-creating a table."

Unable to start Photoshop CS6 - could not open a scratch file because the file is locked (Windows)

When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c:\ drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C:\ drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
To get around this issue I first had to give the user that I was logged on with write permissions to the root of the C:\ drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users\Admin\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users\<your logged in username>\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings.
Photoshop and bridge should now start up with no issues.
I hope that this can help others out there as this caused me a great deal of frustration when upgrading to CS6.

station_two wrote:
OK, here comes the explanation of what the scratch disk does and why it's optimal to have it on a physically separate internal drive (not partition!) other than your boot drive
I probably shouldn't say anything since it could complicate this thread, but the rules of thumb can be different under special circumstances when SSD is involved.
IF you have a LOT of empty space on your SSD-based system drive, then Photoshop can actually work great with it's scratch setting pointed at the system drive. This is because a) SSD transfers are much faster than spinning hard drives and b) there's no seek time, so simultaneous transfers to/from scratch and swap files aren't devastating to performance, and you can see a net gain because of the increased I/O throughput over what's possible using a separate spinning drive for scratch.
But if you don't have a huge amount of free space (hundreds of GB) on the system SSD, it's definitely better to use a separate drive, as station_two has said.
Also, up to about a year or so ago, you had to try to severely limit write activity to your SSD drive, since you could actually wear them out by repeated high data write activity. That's pretty much a non-issue now with the advent of things like the SandForce in-drive controller that does wear-leveling inside the drive. Modern drives will last 10 years or more in normal typical use, without special consideration.
As it turns out, making a RAID array of SSDs is a great way to boost performance across the board, have bunches of free space, and ensure even the heaviest usage doesn't shorten the drive life. I have done so, creating a 2 TB system drive C: made from 4 SSDs and Photoshop's swap file (and pretty much everything else) pointed to C:. This system flies, and I can barely tell when Photoshop and/or Windows "goes virtual" and starts using its scratch/swap files heavily. I don't even notice Photoshop auto-saves.
Sorry for the SSD diversion.
Back on topic:
Pretty much everyone who's successfully using a computer - Mac and PC users alike - comes to realize after a while that the task of integrating things on their computers and making everything work falls on THEM, not the developers of applications like Adobe. Some applications pose unique challenges, but to think you can just throw up your hands and try to make it someone else's problem when something goes wrong simply isn't a viable strategy. Maybe that's how things should be, but it's not how it is.
For those of you struggling to get Photoshop to run properly, bear in mind that it's on you to get things working. It works for most folks. It could be a configuration or setup choice you've made that may need revisiting, or some kind of restorative activity that you need to do, or even something very minor like clearing your Photoshop preferences, but it may well take your learning new things and doing things you didn't think you'd have to do to get back to where you can edit photos. It's no one's problem but your own.
So let us here on the forum help you - when we say to do something, try it. We're not here to jerk you around; we're users just like you who have already found the ways to make things work, and we'd like to help you do the same.
-Noel

PDF File not opening in browser for sharepoint 2010

Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

BI Integration Wizard not opening

Similar Messages

Maybe you are looking for