BI is flagged as inactive in BI source system

Dear All,
BI Consultants are facing error on RSA1 tranaction in the Source system .
RSA1 -source system - select Sources system -right click - click check . they are getting the below error .
BI is flagged as inactive in BI source system
Diagnosis
     BI is flagged as inactive in BI source system .
Procedure
     If you have upgraded to BW 2.0, activate the source system.
     With other errors connected to this source system, choose Rest
     source system from the source system tree in the Data Warehous
     Workbench. This regenerates the source system, merges the rele
     communication parameters, and replicates the DataSources in BI
Kindly advise to resolve the issue.

Hi,
Have you ever checked the thread, below? It's been solved, previously
BW Issue
Best regards,
Orkun Gedik

Similar Messages

Initialization Flags deleted from Initialization options for Source System

Hi BW Experts,
We have loaded PCA data in Infocube last week with Fiscal Year/Period Selection Parameters like
001.2004 to 016.2004
001.2005 to 016.2005
001.2006 to 016.2006
001.2007 to 016.2050
So we got 4 Initialization flags in Initialization options for Source System in SCHEDULER.
After this we are running Deltas daily
Accidentally All Initialization Flags deleted from SCHEDULER yesterday that we did not know yesterday.
Deltas did not run today.
Please can anyone tell me the solution for this.
I have to run the Delta today. How can i get the yesterday records in my Data Target,
Thanks & Regards,
Anjali
Message was edited by:
Anjali

Hi Anjali,
Please delete the Init Request from your data target performed for Selection 001.2007 to 2050.
Also delete only those deltas request from your Data target which were performed after the above mentioned Init.
And then Re-Init with Selections on Fiscper - 001.2007 to 2050.
Thanks
CK
Highlighted
Chitrarth Kastwar

DW Workbench - Source System : Object Information

I recently applied some bi support packs through spam, and I realize now in my BW Workbench Source Systems
under Modeling, the active/inactive sign under Source System : Object Information column is no longer showing,
which, usually indicate whether the connection to the source system is ok or not.
Does anyone know what configuration is changed?
Thanks.
Edited by: BI Junior on Jul 16, 2009 8:04 PM
Edited by: BI Junior on Jul 17, 2009 2:36 AM

Thanks Mohan Kumar,
I check the source system, it is ok.
However, under that column, I used to have a active/inactive symbol which will tell me whether
the connection is ok or not, now the symbol is gone, so I have to check to see whether the
related source system ok or not.
Could you see the symbol in your system? My BI7 ides was SP70009, now I updated to SP70016...

Data source inactive in the quality system

Hi all,
I transported R/3 datasource from DEV to QA and replicated datasource in to BWQ but the datasource in QA is inactive eventhough it is in active mode in R/3 QA system. When I checked the RSOLTPSOURCE table there is no entry for my datasource. When i try to transport the transfer rules it is giving error 'DataSource xxxxxxxx does not exist in source system XYZ of version A'. How to activate the datasource in BW quality system.
Could any one help me to resolve this issue.
Thanks in advance.
Mandadi

Hi,
Firstly nly the active data sources in the source system will be available for useing in the bw.
R/3 check whether the datasource is active or not. If not active activateit.
If active , on the bw side replicate that particular datasource. and activate it again through program RS_TRANSTRU_ACTIVATE_ALL
Hope this helps
Janardhan Kumar

Source System inactive in Quality

Hi Experts,
I need to load the data from flat file to ods but my source system is inactive in Quality server when i double click on source system it is not showing any active button in quality server, but the same source system is active in development server.
Please can any one solve my problem.
Many Thanks in advance
David

Hi Srinivas,
Thanks for your answer, and one of my source system is still inactive for this i follow the below steps,
1) Run the program in se 38 RS_TRANSTRU_ACTIVATE_ALL
2) RSA1- source system_ right click on source system - activate..
but still my source system is inactive so how can i solve my problem... please give me solution.
Daivd

Error 'The location you entered does not exist or is flagged as inactive.'

Hi
In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
Appreciate any pointers on the same.
Thanks
Alagappan
Edited by: user5733015 on Dec 19, 2009 8:35 PM

Hi Hussein
Thanks for the update.
I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
Can you give me some insights 'What could be the actual problem'?
Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
Appreciate all your help.
Thanks
Alagappan

BAdI implementation FIAA_BW_DELTA_UPDATE inactive in source system DEV

Hi all.
I'm trying to execute an infopackage to get 0ASSET (texts delta initialization). But it shows me the next error message: "BAdI implementation FIAA_BW_DELTA_UPDATE inactive in source system DEV".
But when I look at this BADI implementation in the source system (Transaction code se19) there are no errors on it.
"BAdI implementation FIAA_BW_DELTA_UPDATE does not contain any errors".
Do somebody knows what's happenning?

Hi,
If you are in version 3.1, then this BADI has an issue.
Kindly refer to the following note:
[SAP Note 590034 Deactivating implementation FIAA_BW_DELTA_UPDATE|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d353930303334%7d]
Cheers...

Source system R33CLNT100 is marked as inactive in BI.

Dear Experts
When I do a source system check via RSA1 > Source systems > SAP folder > right-click the R/3 system ID and select Check function,
the system throws as error as shown :
"Source system R33CLNT100 is marked as inactive in BI."
"Procedure
    If you have upgraded to BW 2.0, activate the source system.
    With other errors connected to this source system, choose Restore   the
    source system from the source system tree in the Data Warehousing
    Workbench. This regenerates the source system, merges the relevant
    communication parameters, and replicates the DataSources in BI.
and
"BI IDoc type ZZZZ011 is not the same as source system IDoc type ZSSS021     RSAR     371
There was a system Refresh from Production R/3 46C to QA system R/3 46C.
We did the BDLS but the IDOC seems to have got overwritten by R/3 Production's, obviously , due to refresh.
Any idea how to resolve this?
It seems like I need to re-create manually the idoc but I am not expert in this area.
I do know there are standard IDOC aspects for BI 7.
But how to re-create the relevant IDOC settings or configurations ? Need to do this in both BI and R/3 ?
Best regards
Pascal

Hi pascal ,
Seems to be connectivity between the source system and the Bi system it will be restore by basis team only. Couple of tings that you can do at your end will make their work at ease
i) check the RFC connection between the Source system and the Bi system in Sm59.
ii)Make sure the user ALERMOTE and SAPCPIC are unlock in ecc side
Now for configuring the source system by urself follow the below points :
1. In BW, call TA RSA1.
2. In the left hand column, choose "Source systems".
3. In the column Source systems, right click on the respective source system and choose "Restore".
4. A popup "Create R/3 source system" appears. Enter the passwords for user SAPCPIC. Hit enter.
5. A popup "Please log on as an administrator in the following screen." appears. Hit enter.
6. A logon screen of the child system appears. Enter your user and password and hit enter.
7. A popup "New source system connection" appears. Hit "Continue".
8. A popup "Check RFC destination" appears. Hit "Check".
9. The child system jumps into TA59, displaying the RFC destination pointing to the BW system. Check it by pressing "Remote logon" (nothing happens, i.e. no error message appears!) and "Test connection" (the connection test table will be displayed). Hit F3 twice. The system jumps back.
10. The popup "Check RFC destination" appears again. Now hit "Use".
11. A popup "Connection can not be used" appears. Hit "Delete".
12. A popup "Please log on as an administrator in the following screen." appears. Hit enter.
13. A logon screen of the child system appears. Enter your user and password and hit enter.
14. A popup "New source system connection" appears. Hit "Continue".
15. A popup "Check RFC destination" appears. Hit "Check".
16. The child system jumps into TA59, displaying the RFC destination pointing to the BW system. Check it by pressing "Remote logon" (nothing happens, i.e. no error message appears!) and "Test connection" (the connection test table will be displayed). Hit F3 twice. The system jumps back.
17. The popup "Check RFC destination" appears again. Now hit "Use".
18. A popup "Replicate Metadata?" appears. Hit "Only Activate".
19. If popup "Do you want to reactivate all transfer structures and DataSources?" appears. Hit "No". If "Display activation log" popup appears - press "No" (that message may appear several times).
20. Press "Back" if "Analyze application logs" screen appears
Source -->http://forums.sdn.sap.com/thread.jspa?threadID=1892011
Thanks,
Deepak

How to set source system inactive

Hi experts,
Can someone please tell me how to turn a source system to inactive???
Thanks!
Artur.

Hi
You cannot Inactivate the Source System -- Try removing the RFC connectivity between the systems
In BI, SM59, delete your R/3's connection entries.
In R/3, SM59, delete your BI's connection entries.

Source system Inactive

I created a source system for our R/3 QA client. The RFC connection works ok between R/3 and BW. I've done the following steps:
Define client administration
Define Logical System
Assign Logical system to client
Create RFC User
Connecting BW with R/3
In the last step I selected Replicate Metadata and chose Only Activate
I get the following error message:
No metadata upload since upgrade RSAR 672
Detailed description:
Diagnosis
     DataSource replication has not been performed since the source system
     upgrade.
System Response
     The Content that is assigned to this source system is obsolete.
Procedure
     Refresh the metadata completely for this source system.
Procedure for System Administration

Michail,
I do have an answert to Your question, but a small request. Could you please send me the step-by-step guide on "How to create RFC connection".
Thanks in anticipation,
Kind Regards
Paddy

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

Inactive infoobjects in Production system

Hi All,
I have started the transportation from BI dev to BI production and I am facing a problem all the objects are inactive in BI production while as those objects are active in BI dev.
I cannot use infoobject activation program in production and niether I can do it manually.
I will appreciate your replies.
Let me tell you this is fresh transport and only first unassigned infoobjects were transported.
Regards
Rahul Bindroo

Hi Rahul,
Any message after transport?
Did you replicate your R/3 data sources first before transporting anything. I think you need to replicate r/3 datasources first and than try others. Replicate datasources going to your BW server RSA1->Source Systems and replicate.
Here are the sequence I maintain for transporting but different people do differently. I find it very helpful transporting staffs piece by piece so that if there are any errors, I can solve the problem easily.
BW Transport Sequence:
Info Object Transport only infoobject.
Info Area
Info Catalog
Cube & ODS togather
Multi-Provider/Multicube -
Infoset
Transfer /Update Rules
Role and Authorization
Report
Workbook
Hope it helps..

ERROR with Source System in BI

Hi,
I replicated the datasources from DEV to BI. They replicated just fine. I can even see it in BI. I then tried to activate the datasource (i created the datasource from a view ) but it gave me a run time error :
ASSIGN_LENGTH_0 Short dump has not been completely restored..too big.
I then tried to go into the source system and tried to activate that and it said:
Source System DEV300 is inactive
BI Unknown in system
BI IDoc type ZSBC019 is not the same as source system IDoc type
The following errors occured in the source syaytem:
Entry in inbound table not found
Entry in outbound table not found
Result of the destination check: No authorization to logon as trusted system
What could have went wrong?
Thanks

Did you try activating the source system in RSA1 ..right click and choose active.
if this doesnt work then you might want to check the inbound and outbound entries in we20 transaction code for the source system. If you have authorization. Or you need to check with your BASIS to set that up for you.

RFC connection to source system is damaged , no Metadata uploaded

Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.

Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi.

BI is flagged as inactive in BI source system

Similar Messages

Maybe you are looking for