Bi MObile in XI 3.0. Getting JVM error in client.

Hi,
I have deployed BI 3.0 according to the document. However when accessing the services page, i am gettign the error"ENABLE REST FOR AXIS2 in conf/axis2.xml".
Due to this, I am getting JVM 104 error in client.
Can some one advice me on the url, that i need to enter in the client connection settingsd

Hi,
Please check out the following link for SAP XI3.0 installation:
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Regards,
Sushama

Similar Messages

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

Why am I getting "Error: Access of undefined property TextInputSkin." and "Error: Definition spark.skins.mobile:TextInputSkin could not be found." errors?

I'm using amxmlc to build a SWF from an MXML source code file. I'm passing -swf-version=13 to amxmlc.
In the MXML source, I have the following line:
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
I get these errors when running the amxmlc command:
...App.mxml(428): Error: Access of undefined property TextInputSkin.
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
...App.mxml(428): Error: Definition spark.skins.mobile:TextInputSkin could not be found.
<s:TextArea id="inputTextArea" width="100%" height="100" fontSize="28" borderColor="#000000" skinClass="spark.skins.mobile.TextInputSkin" />
Why am I getting these errors? I need to be able to use the spark.skins.mobile.TextInputSkin in order to have use of the soft keyboard on iOS devices.

you need the classes mentioned after 'Definition" in the lines below and they should be place in de/alex_uhlmann/animationpackage subdirectory of your default directory.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 2, Column 50
1172: Definition de.alex_uhlmann.animationpackage.animation could not be found.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 3, Column 48
1172: Definition de.alex_uhlmann.animationpackage.drawing could not be found.
Symbol 'nms_new_all.flv', Layer 'Layer 6', Frame 1, Line 4, Column 48
1172: Definition de.alex_uhlmann.animationpackage.utility could not be found.
you also need penner's easing class in com/robertpanner

JVM error 102" no fix found"

I am getting JVM error 102, when i can get phone to turn on.
most of the time i just get red light flashing 2 times.
I tried connect to USB and run apploader but i get unknown device.
I found a post where i can connect via usb while red light is on and then connect to BB via apploader but the port selection show COM5 there is no USBUNKNOWN liste.
IVe als tried JLcommander it will not connect either.
If i plug usb in with jvm 102 the phone shuts off.
I haver also tried taking battery out and plugging in.
Nothing is working
pls help.
BLACKBERRY PEARL
WINDOWS XP
T-MOBILE

Use JL_cmder to wipe off your device and then follwo the process that I've mentioned.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

JVM error 513 for blaclkberry curve8310

hello,
i am getting jvm error 513 in my blackberry curve 8310 how to correct that now and where i can get the OS and get it repaired? what is thew procedure for that? plz help me

Hi Mallya,
Welcome to the Community & Thanks for your Post,
Please find article to install OS below
How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop Software fo...
Hope this will help you..!!

HELP: BB CURVE 9920 JVM ERROR 517 reset

im getting JVM ERROR 517 in my bb reset when its being turned on. when its being reset it gives me the same error.. please help and advice what should i do..

http://www.blackberry.com/btsc/KB30332
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Getting error"Broker Client is no longer connected to the Broker Host"

HI Guruu2019s,
I'm trying to featch Data from SAP using IDOCs in Real Time Job. I have configured Real-time service ,Client Interface and RFC details successfully .also I start my Real-time service, it is showing green symble -" Weating for Idocs "
when start Idoc process from SAP system ,I'm getting below Error-
*"Broker Client is no longer connected to the Broker Host AGLSAPSBXARDDB1:4000"
Pls-2 give me the solution where is the problem -in sap side or BODS side and I hope you should have some solution
I'm doing wait for your response.
Thanks & Regards,
Rajeev kumar
SAP-BODS Developer

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

When launching a transaction, I am getting error that client XYZ has status

I am in SAP APO , when I try to launch the transaction /SAPAPO/48000009
SAP Menu -> SCM Basis -> Planning Service Manager -> Current Setting -> Define Planning Profile. I get a error saying Client XYZ has status 'not modifiable'.
What setting could be missing?
Please help with your inputs.
Harsha Gatt

You are on the wrong forum. This forum is about SAP Business One SDK.

Connecting a printer, but getting an error message

Hi, I'm trying to connect my new printer "Epson sx515w" to my MacBook, using ox 10.4.11.
I get the error message "client-error-request-value-too-long" when I try to add the printer to my printer list. PLease help!

There has to be another reason. This system was imaged with a fresh install of Office 2010.
I had similar issues with Presenter 7, and if I am not mistaken, you had to provide me with a *.reg file to allow this to install properly.

Why do I get the error message "unable to load page (HTTP 502) when I try to open Mobile Web?

I have an LG Octane 3 basic phone.   Does everything I need, phone and text, and I never was interested in web or e-mail capabilities until I recently upgraded our plan to the "More Everything" and was able to use data and check e-mail and access the internet.   Whenever I try to open Mobile Web, I get the error message "unable to load page (HTTP 502)".    As of March 31, 2015, all of us basic phone users lose the "Mobile Email" app on our phones, and will have to access web versions of our e-mail via the web. Which is currently unavailable and doesn't work.
Over a week ago, did a chat session with a tech support rep, and she indicated that either she or an engineer would contact me with how to fix the problem.   Have not heard anything from anybody, and the deadline is approaching quickly.   Have no need of all the excess features of a smart phone, nor do I wish to be forced to jettison a perfectly working phone for my needs and buy something I don't want to be able to do 2 simple things.............check e-mail to see if there's something that needs to be answered right away, and to check traffic reports when I'm on the road, or find something in an area with which I'm not familiar.     Not really too much to ask, you would think....   )
Has anyone else had this same problem, and if so, how do we fix it....??? My next move is a phone call, but those haven't always been very productive.
If any of you have any ideas why this error keeps coming up and the web can't load, and some on how to fix it, I would really appreciate some advice.
Thanks in advance.
Karen

Since the chat session got no reply, I contacted Verizon by phone and a very nice level 2 tech created a trouble ticket and sent it up the food chain. Got a call back, maybe 2 days later, and had a nice, although very long session with a higher level tech. They had determined that the browser for the LG Octane is an old one and no longer supported by Verizon.    We tried everything we could to download the Opera browser, but since I was totally unable to get Mobile Web to work, couldn't do it.   The only other possible "fix" was to totally reset the phone to factory specs and try it again.   That would mean a lot of work on my part to move anything I didn't want to disappear off the phone, and find a place to forward texts that had to be saved.   Caught our tenants lying about why the rent was late (again), and need that for when I put them back on a lease....
Long story short is that unless we try this total reset, which isn't a sure fix, either, anyone who isn't able to access the Mobile Web with the LG Octane will have to change their plan to avoid paying for data that you can't access using any method.
I ran a test with an app that I knew was no longer valid.....that was sending photos to PixPlace.   Got the exact same error message as when trying to access Mobile Web to get the web version of my e-mail.   That just verified that the 502 error is, at least in the LG Octane, for an app that no longer works.   After today, we'll get the same thing when we try to access Mobile E-Mail.
Have to admit, it's a real ****-off, but this shouldn't surprise me, since Verizon won't repair older copper phone lines if you are in an area where FIOS is offered.
I am going to immediately change my husband's and my cell phone plan to one without data, and see what I can find that will still give unlimited calls and text. The way my luck runs, they won't offer one for a decent price. The other half has some very long-winded friends and he was always running over minutes, and some months are very text-heavy and I'd go over my limit.   Absolutely HATE touch screens, and am not looking forward to having to get a new phone.

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.

I just downloaded itunes 10.5 and i get an error every time i hook up my mobile devices.
And this is the error that comes out:
szAppName : AppleMobileDeviceService.exe szAppVer : 17.88.0.7
szModName : kernel32.dll szModVer : 5.1.2600.5781 offset : 00012afb

http://www.youtube.com/watch?v=be09gGFw-Y4

I have an iPod Touch version 4.2.1, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. What can I do to fix this problem?

I have an iPod Touch version iOS 4.2.1, 8 G capacity, and whenever iTunes tries to sync my iPod, I get an error message saying "Mobile Backup has encountered a problem and needs to close", and the sync fails. I have tried deleting and reinstalling iTunes, and the same thing happens. What can I do to fix this problem?

Try:
iOS: If you can't back up or restore from a backup in iTunes

I am trying to install iTunes. In the midst of the installing process, I get this error message: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

I am the only user for my computer, and consequently the administrator. If I go to Control Panel > Administrative Tools > Services and try to manually start the service, I immediately get the following error message: "Windows could not start the Apple Mobile Device service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." I have tried following the steps advised by others online who also have received this message, but to no avail.
On the Apple error message, I have three options: Abort, Retry, or Ignore. Abort, obviously, causes the installation process to cease. Retry brings up the same message again. Ignore causes the installation to finish, but then I receive this message: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)."

Go into Programs and Features
Uninstall:
iTunes
Bonjour*
Apple Software Update
Apple Application Support
Quicktime*
iCloud*
Apple Mobile Device Support
* I didn't have to uninstall Bonjour, iCloud or Quicktime to fix my issue but it won't hurt anything to uninstall them.
Reboot. Download a fresh copy of iTunes. Right click on the exe file and select Run as Administrator if you have the option if not just Run it. Should fix the issue.

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

I went to do an Itunes update, got error mssg and I needed to uninstall and reinstall. It's is on an external hard drive so I changed the default drive that and I'm getting this error mssg:"Apple Mobile Device failed to start. Verify sufficient privileges

I went to do an iTunes upgrade and got an error message that it could not be found? It suggested I uninstall and reinstall my iTunes. After a failed attempt, I realized the location was set to the default hard drive of C:, so I tried again by changing the location to my external hard drive. Now I get an error message that says:
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.
Help! What's the deal?
Stacey

Hello staceonbass,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Bi MObile in XI 3.0. Getting JVM error in client.

Similar Messages

Maybe you are looking for