BI Pattern Wizard Role Missing in 2004s!

Hi, In the Front-end design guidlines document for 2004s the BI Pattern Wizard Section mentions that the reuseable Web Items are available in role SAP_BW_PATTERN_OBJECTS. I can't find this role in the system and it doesn't show up in Business Content as available either. Googling shows that the Role is only mentioned in only one place and that's the document I'm referring to.
1. Is anyone using BI Patterns successfully in 2004s?
2. Anyone know how to access Role SAP_BW_PATTERN_OBJECTS?
Thanks!
Message was edited by:
Kenneth Murray
Can anyone from SAP confirm this Role?

Forgot to mention I am already on SP10 and have the wizard working fine. Just that when I go to specify a reuseable web item I do not see any of the standard items from SAP. According to the paper I need that Role!
How can I fix this so that I can see them?

Similar Messages

BI Pattern Wizard

Dear All,
I tried playing around with the Pattern Wizard in WAD on 2004s.
The problem there is, I can not see the reusable web items and the ICP template is not being displayed properly.
I tried searching for the sap_bw_pattern_objects role and was not able to find it.
Any inputs?
Thanks,
Karan.

Hello,
Please try to open any Reusable Web Item (RWI) in WAD directly (in the Reusable Web Item pane). Do you see any there?
Have you activated all RWIs that are delivered by SAP in your backend?
Regards, Karol
SAP BI Development

BI Pattern Role Missing!?

Hi, In the Front-end design guidlines document for 2004s the BI Pattern Wizard Section mentions that the reuseable Web Items are available in role SAP_BW_PATTERN_OBJECTS. I can't find this role in the system and it doesn't show up in Business Content as available either. Googling shows that the Role is only mentioned in only one place and that's the document I'm referring to.
1. Is anyone using BI Patterns successfully in 2004s?
2. Anyone know how to access Role SAP_BW_PATTERN_OBJECTS?
Thanks!
Can anyone from SAP confirm this Role?

Hi, Thanks for the quick reply! After a search they still do not show up! And from looking at BC they are all installed. Maybe I need to have some other role?
Any ideas what I can do?
Thanks!

2004s BI Pattern Wizard Use!

Hi, Do I have to install the Business Content Web Templates in order to use the BI Pattern Wizard? If so where is it documented which ones to activate?
Thanks!

Please review note 985119 to use the template wizard from SP 9 and above.

Content Management Role missing in EP 7

Hi Experts,
I have to store some documents in SAP EP KM. I have noticed that Content Management Role missing. We are using EP 7. Its strange. Can you please let me know the reason. Earlier I was using Content Management role for storing documents, Collaboration etc.
Regards,
Gary

Hi,
Go to User Administration -> Identity Management.
Select the user and click the modify button.
Go to the assigned roles tab
search for the Content Manager
Add only pcd:portal_content/specialist/contentmanager/ContentManager role and save.
Hope that helps.
Raghu

Abnormal Shutdown and roles missing

Yesterday my database shutdown abnormally.. after opening the connect,dba ansd some other roles missing . and users cannot able to connect .later I give the create session privilage to all users then they can able to connect How it happened? please help
How it happened?
alert log file
Thu Feb 15 09:02:13 2007
ARC1: Completed archiving log 1 thread 1 sequence 4726
Thu Feb 15 09:20:53 2007
Thread 1 advanced to log sequence 4728
Current log# 3 seq# 4728 mem# 0: /data/oradata/wg92/redo05.log
Thu Feb 15 09:20:53 2007
ARC0: Evaluating archive log 4 thread 1 sequence 4727
ARC0: Beginning to archive log 4 thread 1 sequence 4727
Creating archive destination LOG_ARCHIVE_DEST_1: '/oraarc/wg92/arch/1_4727.dbf'
Thu Feb 15 09:21:37 2007
ARC0: Completed archiving log 4 thread 1 sequence 4727
Thu Feb 15 10:13:20 2007
Thread 1 advanced to log sequence 4729
Current log# 1 seq# 4729 mem# 0: /data/oradata/wg92/redo06.log
Thu Feb 15 10:13:20 2007
ARC1: Evaluating archive log 3 thread 1 sequence 4728
ARC1: Beginning to archive log 3 thread 1 sequence 4728
Creating archive destination LOG_ARCHIVE_DEST_1: '/oraarc/wg92/arch/1_4728.dbf'
ARC1: Completed archiving log 3 thread 1 sequence 4728
Thu Feb 15 13:51:38 2007
Shutting down instance (abort)
License high water mark = 135
Instance terminated by USER, pid = 7740
Thu Feb 15 13:48:50 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 3
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.1.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /data1/oradata/wg92/control01.ctl, /data2/oradata/wg92/control02.ctl, /data3/oradata/wg92/control03.ctl
db_block_size = 8192
db_cache_size = 318767104
compatible = 9.2.0.0.0
log_archive_start = TRUE
log_archive_dest = /oraarc/wg92/arch
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
max_enabled_roles = 100
remote_login_passwordfile= NONE
db_domain =
instance_name = wg92
dispatchers = (PROTOCOL=TCP) (SERVICE=wg92XDB)
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/bdump
user_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/udump
core_dump_dest = /oracle/app/product/9.2.0/oracle9/admin/wg92/cdump
sort_area_size = 524288
db_name = wg92
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
Please help

later I give the create session privilage to all users With what privilge do you logged on yourself to grant privileges?
users cannot able to connect Which users cannot connect. Do you mean all users excluding sys?
If you start your database in restricted mode then users with restricted session privilege can only connect. Is this your case?
Message was edited by:
Vishal V.

Following mandatory roles missing in partner maintenance

Dear Experts,
i'm getting warning message Following mandatory roles missing in partner maintenance: ZF, ZV when i'm creating PO,
i'm getting this waring even though i delted partner roles ZF,ZV and related Schema as well,can u pls tell me how to avoid this warning
Thanks in advance

Hi,
Did you maintain the partner function ZF and ZV and assigned to your Account group. If yes go to
SPRO-> Material Management->Purchasing->Partner Determination->Partner Settings in Vendor Master Record-> Define Partner Schemas
In this Screen, select your partner schema, you created earlier and click Partner Function in Procedure .System takes to next screen and now check Mandatory check box of your partner function ZF and ZV are ticked or not. If not, tick it and save.
Also check assignment of Partner Schema to Account group.
Now try to Create PO and hope you would not have problems.
If helpful to you, then reward.
Regards,
Biju K

Pattern Wizard

Hi everyone,
We apply Note 985119 and can not find Pattern Wizard. We also updated to SP10 and still can not find it. Can anyone tell me what steps I need to do to have this Pattern Wizard.
Thanks, Jin

Using the ICP pattern results in all of the selection I spoke about earlier!
thanks

Display of roles missing in BEx dialog box

Hi Experts!
I am facing an issue with BEx:
We just upgraded to Support Package 18 and afterwards all roles in the BEx dialog boxes are missing. Before upgrading everything was fine.
If we assign SAP_ALL to local users, they are able to see roles, but if we don't, they don't even see their assigned roles.
I searched the OSS and SDN but couldn't find an answer to that problem.
Any suggenstions?
Thanks in advance!
Inga

Hi
Recheck the same at PFCG / SUIM for the Authorization may be they must be recheck/save/reactiavte with SAP_NEW - All new authorization objects added during an upgradation??
Basis team can help you in this
Hope it helps

Admin tab user role missing!!!!!

I need help,
it seem I have error,
when I play with user role in admin tab.
when I restart pc server, I have problem to access my BI Publisher.
I just see
tab report, schedule.
admin tab missing .
and all my report I make missing to.
How to fix it,
Oh when I change password in analytics it change to in BI publisher,
analytics = BI publisher,
But admin tab missing how to fix it help me urgent!!!!
Thanks.
For Your help and Supporting.

XMLP_ADMIN,XMLP_DEVELOPER,XMLP_SCHEDULER
CREATE THESE GROUPS IN ADMINISTRATION.AND ADD ADMINISTRATOR IN THIS GROUPS.
TRY THIS IT WILL WORK

How to get BI role in portal 2004s

is there any delevered roles of BI/IP in portal 2004s ?
do we have to download Business Package from SAP site to get more roles as we do not see any delivered roles for BI and IP in user admin of portal

For BI specifically, there is the
1. Business Explorer Role
2. Business Intelligence Role
3. Business Planning Role
These are delivered roles and are installed with the BI-JAVA usage type. There is an additional role for admin cockpit called BI Administration Role. This role requires the Business Package for the Admin Cockpit to be downloaded and installed on your portal.

BI Pattern Wizard Question? BI 7.0

Hi, When creating a new Web Template in WAD I am invoking the BI Wizard. I select the "Small Web Template w/Analysis Item and 1DP", but only 2 steps are shown.
1. Web Template Properties and Data Provider Settings
2. Analysis Item (Confusing at best)
I was expecting to have to select and configure quite a bit more like filter area, drop downs, etc. Any ideas why only 2 steps are showing up?
Thanks,

Using the ICP pattern results in all of the selection I spoke about earlier!
thanks

BI Pattern Wizard not working

Hi, when I try to create a template in WAD using the ICP Pattern I get errors in the template.
RSWADMDERR1 169 Item not recognized; check spelling or metadata in system
RSWADMDERR1 064 Parameter not recognized; Check your metadata.
These errors are presented in a dialog box. Selecting OK brings me to the detail error messages which shows:
E001    Parameter of Object data_provider:QUERY_VIEW_DATA_PROVIDER:DP_1 unknown to system
E165    Itemtype of Object item::DATA_DISPLAY not known
E110    Parameter INITIAL_STATE of Object data_provider:QUERY_VIEW_DATA_PROVIDER:DP_1 cannot be parent of
E115    Item item::DATA_DISPLAY of type cannot be parent of VISIBILITY
E115    Item item::DATA_DISPLAY of type cannot be parent of DATA_PROVIDER_REF
E180    Illegal Parameter value of Paramter INITIAL_STATE of Object data_provider:QUERY_VIEW_DATA_PROVIDER:DP_1
The funny thing is that the wizard didn't even ask for a data provider. has anyone got experience with this wizard in BI 7.0 that might be able to help?

Just had to input an infoprovider in the appropriate place in the wizard. It's not intuitive. The place to input an infoprovider looks like part of the accompanying graphic.
Thanks

Predefined Roles Missing in Authorization Management Tool

Hi Guys,
The Predefined roles
SAP_AMT_AUTHORIZATION_ADMINISTRATOR
SAP_AMT_USER_ADMINISTRATOR
SAP_AMT_ROLE_ADMINISTRATOR
are missing when I logged in to AMT.
I checked the SAP notes and found the note 657434.
It asked me to run the report INSERT_ADDITIONAL_AMT_ROLES_40.
I ran the report in the CRM system using transaction se38.
and ran the ConnTrans
But even then the roles are not visible in the AMT.
Did I miss any other Steps.

Hello Zack,
Did you make a manual extract of the subscriptions for the site?
Are some messages coming to the mobile?
If not, try to regenerate the replication object/publication with transaction SMOGGEN and make an extract again.
Regards,
Frédéric

Roles missing in available role list at import role option

We have sap boxi 3.1 and sap integration kit both with SP2.
we configure sap authentication in the CMC.
The entitlement system is configured with a user that has no restriction in sap (SAP ALL user).
We have approximately 1400 roles in our BW client
In the available roles list at the import role tab we can see only 220-230 roles.
The list is randomly.
When we configure another bw client as a different entitlement system,
we receive approximately 280 roles out of 1380.
It looks like we are missing some buffer size configuration.
Any ideas ??
thanks.

Hi Ingo,
Thanks a lot.
Yes, the user in the CMC has SAP ALL credential, and is allowed to see all BW roles.
The missing roles are indeed those that are not assigned to any user.

BI Pattern Wizard Role Missing in 2004s!

Similar Messages

Maybe you are looking for