Bi & PI monitoring tips

Hi
Friends tell me as a sap basis administrator what are the things we monitoring in Pi&Bi systems,and send me the links related to that or blog lists
Thanks & Regards
dhana.

Hi Dhana,
There are many additional monitoring activities for PI and BI systems :
PI monitoring :
1. Message monitoring in sxmb_moni
2. checking various services in PI in Visual admin/NWA
3. PI Archiving jobs monitoring
4. If SLD is on PI system then checking status of SLD
BI monitoring :
House Keeping / Performance Tuning Activities in SAP BW Systems -- PART 3
Hope it helps.
Thanks,
Pragyesh Parekh

Similar Messages

Monitoring Microsoft Azure Backup

How can I monitor if Azure Backup has run successfully or not? Actually I am using PRTG Monitoring, however you can maybe just give me Basic Monitoring tips which I can then use with my PRTG Tool.
As I see, Azure Backup writes to an Eventlog %SystemRoot%\System32\Winevt\Logs\CloudBackup.evtx which I can not monitor with WMI Sensors (I tried this with WMI Testing Tool).
I know a successfull Backup gets displayed in Microsoft Azure Backup Tool. But as one only opens this Tool to Change something or troubleshoot, I Need a solution that informs me if a Backup was not successfull. Best would be to get informed by email.

Hi,
Currently, you don't have reporting(Email Notification) feature in Azure Backup. But with the Help of Powershell, you can create a task to get an email notification for Azure backup with logs attached to it.
You may refer:
http://www.itgeekrambling.co.uk/azure-azure-backup-and-email-notifications/
Please vote in
here for Email notification in Azure Backup.
Regards,
Manu

If PC's display card has a mini display port,could I connect it with iMac?

My PC has a ATI HD6870 display card,the display card has 2 mini display ports.Could I connect PC to iMac27(new vision) with mini display ports?I just want to use iMac as PC's Monitor in some time.

The short answer is yes, get a cable and try it; should work.
This guy wrote a long answer, still yes in your case:
http://blog.fosketts.net/2010/01/05/27-imac-monitor-tips/

Msi 5200 Vtd 128

I have a problem with choosing my nview mode, I cannot choose dualview or clone mode. It only displays 1 item, single display only. I already updated my driver to 53.03 but still doesnt work. I can choose whether to display analog or tv but I want both to work simltaneously and to display in clone mode. My tv out is working ok when i choose to display it on tv but my monitor goes black.
SPECS :
MB - MSI 845 GE MAX / P4 1.8 GHZ
MEM - 256 DDR
OS - WINDOWS XP PRO SP1
MONITOR - SAMSUNG 151 S LCD SYNCMASTER
My old video card was working ok with clone mode, it was a geforce 4 mx 440.
please help.

Hello, thanks for answer. I can tell you that my monitor is a ViewSonic E771 and there is no driver for Windows 2k in the Homepage of ViewSonic because Windows 2k auto detect it.
In the monitor tab of "Advanced options in the Display panel" it says: "Monitor tipe: ViewSonic E771". I don't trust in microsoft drivers very much, but in this case I have no choise, there isn't another driver for this monitor in the world! but what I can do is to try with another monitor to see if it work, then I tell u.
The extrange thing is that before with my GeForce 2 MX 400 I had the same computer, same windows, same monitor and same TV and everything was OK.
I'm already loosing hopes in that someday I'll have my TV and monitor turned on at the same time with my VGA!
Thanks again...

Tips on managing Activity Monitor?

I'm getting a new MacBook Pro next week. Until then, I'm running my current machine off an external hard drive. However, it's very hard keeping it going. It sometimes works fine for a while, but it always freezes eventually, apparently a victim of insufficient memory.
I just wondered if anyone has any tips on key processes I can close in Activity Monitor to keep it going? I've freed up some memory by using Safari and TextWrangler instead of Chrome and Dreamweaver. In fact, the only programs I have open at the moment are Safari, TextWrangler, MAMP PRO, Activity Monitor and Finder.
Surprisingly, Finder appears to be another major memory hog; it freezes all the time (though not at the moment).
Thanks.

I have a 1 TB hard drive, and it's just half full. Here are the results of the EtreCheck scan...
Hardware Information:
          MacBook Pro (13-inch, Late 2011)
          MacBook Pro - model: MacBookPro8,1
          1 2.8 GHz Intel Core i7 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 0:3:10
Disk Information:
          TOSHIBA MK7559GSXF disk0 : (750.16 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /Volumes/Macintosh HD: 749.3 GB (173.47 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5970H
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. Apple Internal Keyboard / Trackpad
          Seagate Backup+ Mac SL 1 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Seagate Backup Plus Drive (disk1s2) / [Startup]: 999.35 GB (500.02 GB free)
                    Recovery HD (disk1s3) <not mounted>: 650 MB
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Configuration files:
          /etc/hosts - Count: 41
Gatekeeper:
          Mac App Store and identified developers
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [loaded] com.barebones.textwrangler.plist Support
          [loaded] com.bombich.ccc.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [running] com.adobe.AdobeCreativeCloud.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.google.keystone.agent.plist Support
User Login Items:
          iTunesHelper
          Google Chrome
Internet Plug-ins:
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
          AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               6%          mds
               5%          Creative Cloud
               3%          WindowServer
               2%          Activity Monitor
               1%          mds_stores
Top Processes by Memory:
          172 MB          com.apple.IconServicesAgent
          98 MB          mds_stores
          74 MB          Creative Cloud
          49 MB          Finder
          45 MB          WindowServer
Virtual Memory Information:
          1.61 GB          Free RAM
          1.15 GB          Active RAM
          273 MB          Inactive RAM
          994 MB          Wired RAM
          302 MB          Page-ins
          0 B          Page-outs

Tips to monitor/debug WF events

Hi,
We have a custom WF event that is not getting triggered on time per design; can someone provide some tips or docs to monitor or debug WF events?
The only time WF events gets triggered is when we recycle the WF listeners.
Env: on 11.5.10.2/10.2.0.3/RH4.x/2-node RAC/PCP enabled
Thanks in advance!

Have you reviewed the Workflow documentation (Admin/API/Client/Developer guides)? -- http://download.oracle.com/docs/cd/B25516_18/current/html/docset.html
Thanks,
Hussein

Tip on How to Monitor Disk Utility Erase Free Space

When you use the Disk Utility Erase Free Space option, it can sometimes appear to hang and the progress bar isn't always a help.
By accident, I discovered that if you run the Activity Monitor and select Disk Usage, you can in fact monitor progress. The Space Free will gradually tick down, sometimes as slowly as 100K/sec, then when it hits zero, it will quicklt tick back up. If you observe this, just let Disk Utility complete to avoid any issues; Activity Monitor makes it easier to be patiet about this.
Hope this helps.

Great tip, thanks for the post!

[Solved] New widescreen monitor. Install & Tips

HI! i have a Samsung 710T monitor (17 inches), conected to an nvidia card, i configured mi xorg with x-configure lot time ago, now im going to bring home a new SAMSUNG 226NW 22" monitor, and i wanna know the best way to configure the new monitor, like
http://www.samsung.com/ar/products/moni … 6nw_01.jpg
http://www.samsung.com/ar/products/moni … 6nw_02.jpg
- can i (without poweroff the computer... and arch) just unplug the old one and plugin the new monitor, and turn it on?
- with the new monitor pluged in, how can i configure the xorg? can just run again nvidia-xconfig, or what's the best way?
- how i set the widescreen resolution in the desktop (fluxbox) and in games like doom 3, quake 4?
- any other tips welcome!!!
New monitor:
LCD TFT de 22" widescreen analog interface
Maximum resolution 1680x1050 pixels
Bright 300 cd/m², dinamic contrast 3.000:1
MagicBright³
MagicSpeed²
MagicTune
TNX!!
Last edited by leo2501 (2007-09-24 17:40:16)

Perfect! now i install the new monitor, just exit X, run nvidia-xconfig as root, and walaa... i have my xorg perfectly in the right place and the monitor is perfectly adjusted... now im going to stress my eyes with doom3 and quake4 ... see'ya

Tips, warnings re iBook and VGA monitor?

Hello,
Sometime soon we are going to buy an inexpensive VGA CRT monitor to hook up to our 12" G4 iBook. Why bother? Trauma to the iBook's screen leading to a still usable but very odd display with a back splotch and radiating lines of varying thicknesses.
Anyway, we found the VGA connector. Have any of you had bad experiences or problems with this type of connection? Advice?
Thanks,
dick glendon

I used the VGA cable from my G3 ibook to an external LCD monitor, since the ibook doesn't have the resolution that the monitor recommend (1280x1024), the image was displayed at wrong proportion. Also I have problem to match the color, contrast and brightness.
I wonder an apple cinema would be a better choice?
Tony Wang

Someone,placed a window for Reading list on the left hand side of my monitor and I want it off. Any tips?

Someone,placed a window for Reading list on the left hand side of my monitor and I want to remove it. How do I do it?

Hello,
That's a feature of Safari...
To open and close your Reading List, click the eyeglasses button.
http://support.apple.com/kb/PH5074

PRO Tip Monitoring option was disabled on SCVMM

Hello,
I have integrated SCVMM 2012 R2 and SCOM 2012 R2 also test the PRO ,the jobs ran successfully.
But i could not able option to enable PRO "Monitor option"(it is disabled) on SCVMM.how to enable this.

You must be a member of the Administrator user role to set up and modify the connection to an Operations Manager server
Also check below links
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

New External Monitor for Logic on MacBook Pro - Suggestions

I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.

No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

Remote desktop connection caused host to lose a monitor and other settings

Hello
After a successful remote desktop login, on the host I can now no longer detect the 2nd monitor. Screen resolution on remaining monitor is off, it's gone over to use Microsoft Basic Display Adapter even though it was using the correct adapter previously.
Both previously working display adapters now show Code 12 error: "this device cannot find enough free resources that it can use". The system has also become very slow, when I right-click the desktop, it takes up to 30 sec for the menu to appear.
Anyone had a problem like this? I have restarted the computer several times, reverted system to a working state last week, done another successful remote desktop login/logout from my laptop to this computer.
Windows 8.1 Pro
Displays: Dell U2412M
Intel R HD Graphics 4600
Thank you in advance for any help/tips to help solve this problem!

This error message can also appear if the BIOS did not allocate enough resources to the device, I want to know how much RAM do you have on your computer, because the Display Adapter calls for extra RAM to run the monitor.
If you don’t have enough RAM to allocate, the monitor won’t start, that’s why the computer becomes very slow.
Here I suggest a possible solution:
Adjust the amount of memory dedicated to video/graphics. You can change that in BIOS. there might be an option in your PC's BIOS that lets you change the amount of system memory used for video/graphics.
You'll just need to find it in the BIOS, the BIOS options in the Advanced settings,
the option varies depends on the BIOS version
you can set the maximum memory that it can take to a lowest value.
Regards
Wade Liu
TechNet Community Support

R3load EXPORT tips for 1,5 TB MAXDB Database are welcome!

Hello to ALL;
this post is addressed to ALL MAXDB-GURU's !!
I'v few questions to MAXDB Performance-Guy's for R3load Export on MAXDB!
(remark to my person:
I'm certified OS/DB migration consultant and have already done over 500 OS/DB migrations since 1995 successfully)
BUT now I'm face with following setup for Export:
HP- IA64 BL870c, 4 CPUu2019s Dual-Core + Hyperthreading activ (mean's 16 "CPU'S" shown via top or glance)
64 GB RAM, HPUX V11.31;
MAXDB 7.7.07
ECC 5.0; Basis/Aba 640.22
SAP-Kernel 640-Unicode Patch 381
8 sapdatas are configured on unique 200GB LUN's and VG's in HP-UX; on storage-side the 8 220GB LUN's are located on (only) 9 300GB-Disks with Raid-5 Level and within HP-UX each VG/LVOL is mirrored via LVM to a second desasterdatacenter (200m distance)
LOGFILES:
2 x 4 GB LUN Raid-1 on Storage and via LVM also mirrored to failover-center
MAXDB-Datasize: 1600 GB Overall and within this 1350 GB used, TEMPUsage about 25 GB !
MAXDB-Parameter-Settings
MAXCPUu2019s 10 (4 x IA64 QuadCore+Hyperthreading shows 16 Cores within top and galcne
Cache_SIZE= I/O Buffer Cache = 16 GB (2.000.000 Pages)
Data-Cache-HitRatio: 99.61%
Undo-Cache = 99,98%
the following sapnote for MAXDB Peformance and Migrations are well known and already processes
928037, 1077887, 1385089, 1327874, 954268, 1464560, 869267,
My major problem is the export-runtime with over 4 days on the first dry-run (6 R3load's running on Linux-APPL-Server), and 46h on second runtime, 6 R3loads running on DB-Server IA64)
the third trail-run was aborted by me after 48hours and 50% export-dump-space was written. In all 3 dry-runs, no more than approx 3.5GB DUMP-Space were written per hour!
My first question to all MAXDB-Guru'S: How can I influence/optimize the TEMP - Area in MAXDB?? I didn't find any hint's in SDN or SAPNOTES or MaxDB Wiki or google....As fare as I know, this TEMP area "resides" within MAXDB-datafiles, thus it's seperated on my 48 datafiles, spreaded over 8 LUN/VG/disks. But I see LESS throughput on disk's and MAXDB-Kernel uses only ONE of ten's cpu-cores (approx 80% - 120% of 1000%).
The throughput or cpu-usage doesn't change when I use 2 or 4 or 10 or 16 R3load' processes in parallel. The "result" is always the same: approx. 3,5 GB Export-Dump and 1 CPU MAX-DB Kernelprocess is used !
so the BIG Question for me: WHERE is the bottleneck ?? (RAID-5 Disk-LUNS mirrored with LVM ???)
on HP-UX scsi_queue_depth_length I'v increased default value from 8 to 32 to 64 to 128 --> no impact
2nd question:
I'v read OS-Note 1327874 - FAQ: SAP MaxDB Read Ahead/Prefetch, and we are running MAXDB 7.7.07.19! (MaxDB 7.8 is not suppored via PAM for IA64 640-UC-Kernel) and as far as I understood, this parameter will no HELP me on EXPORT with primary-key-sequence ! is this correct? THUS: which parameter HELPS for speeding up Export-Runtime?
MAXCPU is set to 10, but ONLY 1 of them is used??
so this post is for ALL MAXDB GURU'S!
who will be intrested to contriubte on this "high-sophisticated" migration-project with 1.5TB MAXDB-Database-size and ONLY 24h Downtime !!
all tips and hints are welcome and I will give us coninued updates to this running project until WE did a successfull migration job.
PS: Import is not yet started, but should be done within vSphere 5 and SLES 11 SP1 on MAXDB 7.8 ....and of yours in parallel to export with migration monitor, BUT again a challenge: 200km distance from source to traget system !!!
NICE PROJECT;
best regards Alfred

Hi Alfred,
nice project ... just some simple questions:
Did you open a message at SAP? Maybe you could buy some upgrade support, this could be usefull to get direct access to the SAP support...
Which byte order do you use? I know Itanium could use both. But it should be different, otherwise you would use a backup for the migration.
And the worst question, I do not even want to ask: What about your MAXCPUS parameter? Is it set to more than 1? This could be the problem why only one CPU is used.
Best regards
Christian

How to use an iMac as a second monitor for an iMac

I have two 21.5 inch iMac's (late 2009) and I want to use one as a second monitor for the other. I have a Mini DisplayPort to Mini DisplayPort connector but when I connect it to both computers, nothing happens. I'm not sure if I'm doing something wrong once they're plugged in or if I have the wrong cable all together. Any tips or advice would be much appreciated. Thanks

Not going to work, the ONLY 2009 / 2010 iMacs that supported Target Display Mode were the 27" models, 21.5" models simply will not work. Please read Apple FAQ on TDM and you will see I am correct.
Target Display Mode: Frequently Asked Questions (FAQ)
While Neil is correct, Screen Recycler's performance is not that good so the user experience probably will not be worth it.

Bi & PI monitoring tips

Similar Messages

Maybe you are looking for