BI planning & SEM T-codes

Hi Friends,
Could you Please share us some important transactions related to BI Planning and SEM.
Thanks & Regards,
Sateesh Keerthi.

Hi
Check this link for planning in BI
http://help.sap.com/saphelp_nw70/helpdata/EN/43/863980155b7102e10000000a1553f7/frameset.htm
Regards
Jagadish

Similar Messages

Please send me S.E.M-Business Planning Simulation Transaction codes

Dear Friends,
Iam Sridhar and new for SEM-BPS.Currently iam working on BW 7.0 .Myself iam Trying to learn S.E.M-B.P.S,Please send Total Transaction Codes AND Learning Procedure.Iam trying to Create Planning Area,Level ,Package.But Iam Unable to Enter Inside The Screen ........Please Guide me........................Iam expecting better guide lines to lesrn S.E.M-B.P.S.Please send me all the ways to learn SEM-BPS Easily.......Now Iam sending my Mail Id:If any body have better material please send me <b>[email protected]</b>
Well Wishers alwase get better Rewards.............
Thanks and Regards,
SridharMenda
09867613433.,
Reliance Industries Ltd.

Hi Sridhar,
Some transactions are:
UG00 - bring up the SEM menu.
BPS0 - get into the main BPS modeller
UPSPM - customizing planning folders
UPSPL - execute planning folders.
tcode for CPM:
UMB_ADMIN Balanced Scorecard Monitor
UMB_ADMIN1 Balanced Scorecard Monitor
UMB_AH Scorecard Aggregation Hierarchy
UMB_BC_OB Strategieelement(Strategie Template)
UMB_BC_PE Perspektive (Strategie Template)
UMB_BC_ST_NAV Ausgelieferte Strategien
UMB_CM Zielerreichungsmatrix
UMB_CO100 Allgemeine Strategieelemente
UMB_CUST Scorecard Design
UMB_CUST_WEB Balanced Scorecard Wizard
UMB_EBB Briefing Book Designer
UMB_GS100 Wertfelder
UMB_GS105 Status & Score
UMB_LAUNCHPAD_WEB Balanced Scorecard Launchpad
UMB_MM Massenpflege
UMB_OB Strategieelement
UMB_OFL Balanced Scorecard Download
UMB_PE Perspektive
UMB_PRES My Balanced Scorecard
UMB_PRES1 Balanced Scorecard
UMB_PRES_WEB Balanced Scorecard
UMB_PRINT Balanced Scorecard Reports
UMB_SC Scorecard Design
UMB_ST104 Strategiekategorien
UMB_ST_MAP Strategieübersicht
UMB_ST_NAV Strategien
UMB_ST_VIEW Strategievorlage
UMB_ST_VIEW_CLIENT Strategievorlage: aktueller Mandant
UMB_UP100 Vertreter
UMB_XML_UP XML Scorecard Upload
UMC_CPM_CHECK CPM Applikationen prüfen
UMC_CPM_MEAS Performance Measurement Design
UMC_CPM_STRAT Strategy Management Design
UMC_DFTRFC Pflege Standard BW-System
UMC_DSP_DFTRFC Anzeigen Standard BW-system
UMC_NOTIF ending Notifications
UMC_PROXY_CUST http Verbindungen - Proxy Details
UMC_TM Periodisierung und Zeitvariablen
UMIG_MONITOR Inkrementelle Migration nach Unicode
UMK_BMK_XDL Benchmark-Werte exportieren
UMK_BMK_XUP Benchmark-Werte laden
UMK_MB Kennzahlen & Benchmarks
UMK_MB400 Benchmark-Selektionen
UMK_MB_BC SAP Kennzahlen & Benchmarks
UMK_MB_BWHUPDT BW-Hierarchie aktualisieren
UMK_MB_BWUPDT BW Stammdaten aktualisieren
UMK_MB_DISP Kennzahlen & Benchmarks anzeigen
UMK_MB_DISP_PARA Measure Builder aufrufen
UMK_MB_MHUPDT BW-Hierarchie aktualisieren
UMK_MB_PROV Maintenance of provider meaure
UMK_MB_SAPBKIC Benchmark Selektionen (SAP use only)
UMK_MB_TRANSL Übersetzung von Kennzahlen
UMK_MB_TRANSP Transport
UMK_MB_UPLOAD Kennzahlen Upload
UMK_MB_XUP Neueste Provider-Kennzahlen holen
UMK_V_MB400 Benchmark Selektionen
UMM_ADMIN Management Cockpit Monitor
UMM_CUST Management Cockpit Design
UMM_CUST_20B Management Cockpit Design
UMM_HIER Management Cockpit Hierarchie Pflege
UMM_PRES Management Cockpit Präsentation
UMM_PRES_WEB Management Cockpit Präsentation
UMM_SH Style Sheets
UMM_TRANS Management Cockpit Transport
UMM_VA100 Variablen
UMM_VAM CPM Variablenpflege
UMR_CUST Risiko-Design
UMR_LOAD Load Risk Estimation Data from BW
UMR_RB Risk Builder
UMV_CUST Werttreiberbaum Design
UMV_PRES Werttreiberbaum Präsentation
UMB_ADMIN Balanced Scorecard Monitor
UMB_ADMIN1 Balanced Scorecard Monitor
UMB_AH Scorecard Aggregation Hierarchy
UMB_BC_OB Objective (Objective Template)
UMB_BC_PE Perspective (Strategy Template)
UMB_BC_ST_NAV Delivered Strategies
UMB_CM Performance Overview
UMB_CO100 Common Objectives
UMB_CUST Scorecard Design
UMB_CUST_WEB Balanced Scorecard Wizard
UMB_EBB Briefing Book Designer
UMB_GS100 Value Fields
UMB_GS105 Status & Score
UMB_LAUNCHPAD_WEB Balanced Scorecard Launchpad
UMB_MM Mass Maintenance
UMB_OB Objective
UMB_OFL Balanced Scorecard Download
UMB_PE Perspective
UMB_PRES My Balanced Scorecard
UMB_PRES1 Balanced Scorecard
UMB_PRES_WEB Balanced Scorecard
UMB_PRINT Balanced Scorecard Reports
UMB_SC Scorecard Design
UMB_ST104 Strategy Categories
UMB_ST_MAP Strategy Map
UMB_ST_NAV Strategies
UMB_ST_VIEW Strategy Template
UMB_ST_VIEW_CLIENT Strategy Template: Current Client
UMB_UP100 Substitute
UMB_XML_UP XML Scorecard Upload
UMC_CPM_CHECK Check CPM Applications
UMC_CPM_MEAS Performance Measurement Design
UMC_CPM_STRAT Strategy Management Design
UMC_DFTRFC Maintenance of the Default BW System
UMC_DSP_DFTRFC Display default BW system
UMC_NOTIF Ending Notifications
UMC_PROXY_CUST HTTP Connections - Proxy Details
UMC_TM Periodization and Time Variables
UMIG_MONITOR Incremental Migration to Unicode
UMK_BMK_XDL Export Benchmark Values
UMK_BMK_XUP Load Benchmark Values
UMK_MB Measures & Benchmarks
UMK_MB400 Benchmark Selections
UMK_MB_BC SAP Measures & Benchmarks
UMK_MB_BWHUPDT Update BW Hierarchy
UMK_MB_BWUPDT Update BW Master Data
UMK_MB_DISP Display Measures & Benchmarks
UMK_MB_DISP_PARA Call up Measure Builder
UMK_MB_MHUPDT Update BW Hierarchy
UMK_MB_PROV Maintenance of Provider Measure
UMK_MB_SAPBKIC Benchmark Selections (SAP use only)
UMK_MB_TRANSL Translation of measures
UMK_MB_TRANSP Transport
UMK_MB_UPLOAD Measures Upload
UMK_MB_XUP Get Latest Provider Measures
UMK_V_MB400 Benchmark Selections
UMM_ADMIN Management Cockpit Monitor
UMM_CUST Management Cockpit Design
UMM_CUST_20B Management Cockpit Design
UMM_HIER Management Cockpit Hier. Maintenance
UMM_PRES Management Cockpit Presentation
UMM_PRES_WEB Management Cockpit Presentation
UMM_SH Style Sheets
UMM_TRANS Management Cockpit Transport
UMM_VA100 Variables
UMM_VAM CPM Variable Maintenance
UMR_CUST Risk Design
UMR_LOAD Load Risk Estimation Data from BW
UMR_RB Risk Builder
UMV_CUST Value Driver Tree Design
UMV_PRES Value Driver Tree Presentation
Bye
Dinesh

SEM-BPS code

Dear Friends,
Req: Varaible gets current or entered month value and the value of variable will be summed up till 012th month. It should not go > 12. Eg: Assum the entered value = 007 and the calculation goes 008, 009, 010, 011 & 012.
In order to fullfill the customer req. Iwe need to apply the below logic. We have done this code in SEM-BPS planning function.
DATA PER TYPE 0FISCPER3.
DATA FPER TYPE 0FISCPER3.
PER = VARV (YFROMPER).
DO.
FPER = PER + 001.
if PER > 001 AND PER <= 12.
YDPT_PRKG, PER} = {YDPT_PRKG, FPER}.
Else.
Exit.
Endif.
ENDDO.
But, this above code is not work as expected and it's executing infinite...Please look into the code and correct me if any syntex or logic issue.
Thanks in Advance for kind support.
Best Regards,
KS

Hey KS,
I'm assuming you've solved this already but if not . . .
Looking at the code below, you see to only hit the ELSE condition and hence exit if PER is not between 1 - 12. Yet you only increment FPER so PER never changes and this loop will run forever.
Might also want to increment the total:
{YDPT_PRKG, PER} = {YDPT_PRKG, PER} + {YDPT_PRKG, FPER}.
Hope this helps.
Regards,
Dan

How to make a plane semi-transparent

Hi everyone. I am new here, and would like to thank you in advance.
I am trying to make a semi-transparent plane using 3D with QuadArray. Have set TransparencyAttributes accordingly; and have even tried TextureAttributes. It just doesn't cut it.
Without setting transparency, the plane is visible both sides. But once transparency set, it becomes invisible.
Can anyone give me some ideas? Thanks!
Here's the code snippet dealing with this plane:
Appearance ap = new Appearance();
TransparencyAttributes transparency = new
TransparencyAttributes(TransparencyAttributes.NICEST, 0.5f);
ap.setTransparencyAttributes(transparency);
PolygonAttributes cullAttribute = new PolygonAttributes();
cullAttribute.setCullFace(PolygonAttributes.CULL_NONE);
ap.setPolygonAttributes(cullAttribute);
TextureAttributes texture = new TextureAttributes();
texture.setTextureMode(TextureAttributes.BLEND);
ap.setTextureAttributes(texture);
Point3f points[] = new Point3f[4];
points[0] = new Point3f(-0.2f, 0.2f, 1.0f);
points[1] = new Point3f(0.2f, 0.2f, 1.0f);
points[2] = new Point3f(0.2f, -0.2f, 1.0f);
points[3] = new Point3f(-0.2f, -0.2f, 1.0f);
QuadArray planeVertices = new QuadArray(4, QuadArray.COORDINATES|QuadArray.COLOR_3);
planeVertices.setCoordinates(0, points);
Color3f colors[ ] = new Color3f[4];
for(int i = 0; i < colors.length; i++){
colors[i] = new Color3f(1.0f, 1.0f, 0.0f);
planeVertices.setColors(0, colors);
Shape3D plane = new Shape3D( );
plane.setGeometry(planeVertices);
plane.setAppearance(ap);
********************

I just found that if I leave the colors undefined for the plane (a Shape3D); that is, remove the QuadArray.COLOR_3 flag, then the transparency works. Unfortunately, in that case, I can only have a white plane, and there's still no way for me to add color to the plane with its transparency maintained.
The right way seems to be using QuadArray.COLOR_4 flag instead. But somehow I can't get it to work. That is, no matter what value I am using for the Alpha value, the plane just remains opaque.
Can anyone give me some suggestions? Thanks a lot!
Message was edited by:
senore100

CO-period lock for planning on company code level

Hello,
I would like to ask you for assistence.
We would like to have the possiblity to lock the CO-periods on company code levels. For actual values, it is possible to arrange this within the validation. However, for plan values the validation is not active.
I have read about possibility to enhance an user exit for paritcular planning transactions (KP06, KP26 etc.), but I can't find it anymore.
Does anybody from you have experience with this, eventually is there another option?
Thanks in advance
Peter

I have had a similiar problem and contact to remote consulting from SAP. They offered a modification (10-15 days if I remember correctly) to make CO period lock company code depending.
If I remember correctly, his name was Valentin (in Germany).
However: if newGL is active with real-time integration and also plan transfer, I think it should be possible to lock in FI.
regards
Bjoern

Invoice Plan Run T.code MRIS : Message getting - No documents selected

Dear All Experts,
Very Good Morning !
I am configuring Invoice Plan for my periodic invoicing requirement, While I am referring this these threads found on our forum SDN.
1 ) [Invoice Plan|Invoicing plan; - Post
2 ) [Invoice Plan in SAP|http://wiki.sdn.sap.com/wiki/display/HOME/InvoicingPlanin+SAP] - Wiki
I am following as per the experts replies mention in it and finally running MRIS for the same, I am getting below message after execution :
No documents selected
Message no. M8702
Diagnosis
There are no documents that comply with your selection criteria.
Procedure
You can enter new selection criteria or exit processing.
Steps I produce for this scenario :
For PO :
1 ) Selected FO in ME21N / Enterted validity period in time frames 01.11.2011 to 30.12.2012 ( DD.MM.YYYY)
3 ) Created account assignment PO with K, Tax code V0 entered.
4 ) Item Details - Invoice Tab : Inv. Receipt - TICKED. ERS - TICKED.
5 ) Item Details - Delivery Tab : Goods Receipt - TICKED GR Non - Valuated - TICKED
6 ) Item Details - Invoice Tab : Invoice Plan is selected - 10 ( Standard SAP )
For Vendor Master : XK02
1 ) GR Based Inv Verification - Not Ticked.
2 ) AutoEvalGRSetmt. Del - TICKED
3 ) AutoEvalGRSetmt. Rel - TICKED
After all this running MRIS I am getting message " No documents selected ".
Apart all these settings have I missed anything here to configure ?
Experts guidance / inputs / comments will be very helpful.
Regards,
Revati Joshi.

Dear redriver,
I tried as you guided, and saved the condition type INS. And run MRIS still no luck.
I tried with selection & unselecting of Test Run. It is giving me same result.
Let me produce the vendor master XK02 details for purchase organization :
1 ) GR- Based Inv Verfi. - TICKED.
2 ) Auto Eval GRsetmt Del - TICKED.
3 ) Auto Eval GRsetmt Ret - UNTICKED
In PO :
Delivery Tab :
1 ) Goods Receipt - TICKED.
2 ) GR Non - Valuated - TICKED
Invoice Tab :
1 ) Inv. Receipt - TICKED
2 ) ERS - TICKED.
3 ) Tax Code - V0 Assigned.
4 ) Invoice Plan : Invoice Plan Tpe 10 is selected as a Sample periodic invoice plan.
Anything else need to check ? Thank you quick replies.
Regards,
Revati Jsohi.

How to display changes of inspection plan via t-code :CBWQM ?

Dear all,
We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
Regards,

QP61 Display change documents insp.plan?

1 Family Plan, 2 Area Codes

Question:
Any advice or idea on how to get different area codes ported into one family plan?
Scenario:
Two people want to join one family account (iPhones, AT&T) and port their existing numbers over. She has an ABC area code number and he has an XYZ area code number. Now, they both live in the OMG area code, but want to keep their numbers (strange, I know!). The family account is created and activated successfully. The ABC area code number is ported and the new billing and residence address is in the OMG area code.
Problem:
The XYZ number cannot join the Family plan, because AT&T's billing system requires that all numbers on one family plan are in the same market (=general metropolitan area). According to 6 out of 10 AT&T Wireless representatives, the aforementioned Family plan can now only accommodate area codes within the vicinity of ABC, regardless of the plan's registration in the OMG area code, which is actually located adjacent to the XYZ area code.
Thoughts:
This market billing problem seems to be particular to the one service provider chosen by Apple for the iPhone. Apparently, the scenario described above already overcame a similar, but lesser problem outlined at ( http://www.appleinsider.com/articles/07/06/30/howto_port_ineligible_mobile_numbers_to_att_andiphone.html ).
Is this really so unlikely to happen that it is not worth to change AT&T's policy and/or processing systems? Is it worth it to pay more per minute on two individual accounts for a phone that is already almost as common as a RAZR? Is it worth it to lose a long-held mobile number for a phone whose price may soon drop again, from a company that is about as faithful to its existing customers as Paris Hilton?
While its features may have been enough to prompt the iPhones' purchase, account inconvenience may quickly prompt a return, unless there is a way to have multiple area codes on one family plan.

NorthernSky wrote:
Scenario:
Two people want to join one family account (iPhones, AT&T) and port their existing numbers over. She has an ABC area code number and he has an XYZ area code number. Now, they both live in the OMG area code, but want to keep their numbers (strange, I know!). The family account is created and activated successfully. The ABC area code number is ported and the new billing and residence address is in the OMG area code.
Problem:
The XYZ number cannot join the Family plan, because AT&T's billing system requires that all numbers on one family plan are in the same market (=general metropolitan area). According to 6 out of 10 AT&T Wireless representatives, the aforementioned Family plan can now only accommodate area codes within the vicinity of ABC, regardless of the plan's registration in the OMG area code, which is actually located adjacent to the XYZ area code.
I think it depends if OMG, XYZ and ABC are all the same market. My husband and I share a family plan but I'm ABC area code and he's XYZ but both our area codes fall in the XYZ market. We actually live in OMG area code now and had to go back to XYZ in order to merge our plans into a family plan.

Billing plan semi month contract

Hello Folks:
My customer would like to have a billing plan where the invoice is created every 15th and 30/31st of every month. The contract used is service & maintenence. Does anyone have any clue how this can be configured without making any ABAP code change
A response will be appreicated
Regards
Susan

Hello Susan,
Please find below is the link which would help you configure,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBIL/SDBIL2.pdf
Thanks
Murtuza

Planned Order T-code

Dear Expert,
Please confirm me what is the t-code for viewing overall planned order apart fro MD04 T-code.
Regards,
Phalgun Patel

Hi,
You can use MD05 if you want to see the planned order after MRP run or you can use MD16 t-code. Also, go to PLAF table and look for planned orders based on your criteria.
Regards,
Gaurav

BDC - Creating Inspections Plans using T-Code QP01

Hi All,
I want to Create Inspection Plans using QP01 transaction using BDC.
It having 4 screens. Third and Fourth screens having line item details.
I did recording. Upto First and second screens data is populating properly, coming to third screen data is not taking even though bdctable having data (in debug mode i found). I don't know hw to resolve this problem.
Can u please explain hw to populate line-item details, possible give some example coding .
Regards,
Prabhakar

Hi,
If you are comfortable using function modules then you will not have any difficulty in using the BAPI, only thing we need to take care of the following, refer the following this is not using the bapi for Inspection plan, this is done for different purpose, still you can refer this and use accordingly,
Data declarations,
DATA: TOPNODEONLY LIKE BAPICO_GROUP-TOPNODEONLY,
      RETURN LIKE BAPIRET2,
      LT_HIERARCHYNODES LIKE BAPISET_HIER OCCURS 0,
      LT_HIERARCHYVALUES LIKE BAPI1117_VALUES OCCURS 0,
      LS_HIERARCHYNODES LIKE BAPISET_HIER,
      LS_HIERARCHYVALUES LIKE BAPI1117_VALUES,
      LV_FLAG TYPE I,FLAG.
DATA: BEGIN OF ORDERS OCCURS 0,
      ORDER_GROUP TYPE GRPDYNP-NAME_COALL,
      DESC(30),
      ORDER TYPE GRPVALUES-VFROM,
      END OF ORDERS.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
       EXPORTING
            FILENAME = FILENAME
            FILETYPE = 'DAT'
       TABLES
            DATA_TAB = ORDERS.
SORT ORDERS BY ORDER_GROUP ORDER.
LOOP AT ORDERS.
    IF LV_FLAG NE 1.
      TRANSLATE ORDERS-ORDER_GROUP TO UPPER CASE.
      LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER_GROUP.
      LS_HIERARCHYNODES-DESCRIPT = ORDERS-DESC.
      LS_HIERARCHYNODES-HIERLEVEL = 0.
      LS_HIERARCHYNODES-VALCOUNT = 0.
      APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
      LV_FLAG = 1.
    ENDIF.
    CLEAR LS_HIERARCHYNODES.
    LS_HIERARCHYNODES-GROUPNAME = ORDERS-ORDER.
    LS_HIERARCHYNODES-HIERLEVEL = 1.
    LS_HIERARCHYNODES-VALCOUNT = 0.
    APPEND LS_HIERARCHYNODES TO LT_HIERARCHYNODES.
    AT END OF ORDER_GROUP.
      FLAG = 'X'.
    ENDAT.
    IF FLAG = 'X'.
BAPI is called to create Internal Order group in the system
      CALL FUNCTION 'BAPI_INTERNALORDRGRP_CREATE'
           TABLES
                HIERARCHYNODES = LT_HIERARCHYNODES
                HIERARCHYVALUES = LT_HIERARCHYVALUES.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      CLEAR : LT_HIERARCHYNODES[], LS_HIERARCHYNODES.
      CLEAR : LV_FLAG,FLAG.
    ENDIF.
ENDLOOP.
Hope this helps,
Rgds,

Forward plans with unmaintainable code.

Has anyone inherited a Java project that did not meet any or extremely few maintainability standards... If so, how did you move forward?
(1) Brought the project up to maintainable standards
(2) Rewrote the project
(3) Attempted to maintain the project as is.

Once I got a project to clean up some horrible code before handing it off to another team who was going to replace whole sections of it.
I told my boss that it was pointless, because the horrible part was exactly what was being replaced. So (with his approval) I did nothing other than sending the code to the other team with some notes pointing out what's horrible about it and how they shouldn't do things the same way. They (presumably) ripped out the garbage and did the right thing.
Generally speaking, however, I find that there's never time to completely fix anything, and managers are resistant to refactoring anything, no matter how much they jump up and down yelling "agile". I think they confuse Agile methods with the jumping up and down part. So you end up refactoring things on a piecemeal basis. I also suggest that when you have to add new stuff to the project, try to avoid doing the quickest fix, because that just makes things worse. The "do the simplest thing that can possibly work" philosophy is only a good idea if you also adopt the aggressive refactoring philosophy as well, and sadly the latter is generally sacrificed.
So despite all the exhortations from managers to be agile, what actually happens is that refactoring, incremental design, test-driven design, etc., are never practiced under those managers, but instead are practiced by the developers in their own time in non-work projects. The developers are criticized for not being agile enough, but they're actually discouraged from being as agile as they'd like. There's something really dysfunctional about all this.
Well, I could complain all day.
Edited by: paulcw on May 10, 2008 7:52 PM

Load plan execution return code

We want to call the LoadPlan via external scheduler.
The call looks like this:
./startloadplan.sh <MYLOADPLAN> GLOBAL "-AGENT_URL=<MYAGENT>"
The odiagent.log shows me that the loadplan failed. But the Shell Script Return value seems to be always 0.
Is there a way to create a wrapper script for checking whether the loadplan is actually failed.
Can anyone please reply

You should probably follow the topic just below this one : ./startloadplan.sh return code always 0 ;)
Stefan S has maybe developed his own solution.

Mobile Website Development for Semi-Non-Coder

Greetings! I was going through a tutorial on Lynda.com on how to build mobile Apps and the author; Joseph Lowery demonstrated where to set up a mobile website as part of the instructions. : File/New/Mobile Starters/ jQuery Mobile (CDN). So I thought I would try it. I have an old mobile website on a client's website that could stand for some righteous improvement over my hack CSS job I did a few years ago.
Anyway, if I understand correctly, the navigation basically acts like page links that link to anchor tags accept they're not anchor tags; is that correct?
That would mean that the entire website would be on a single index page correct (something tells me not, though)?
If not, if it can have multiple pages, how do you link them. I tried to add simple links to other pages but no luck. Then I tried putting anchor tags, no luck. I'm sure this is just noobs luck but thought I'd ask the geniouses. What I really need is a turial on building mobile sites I guess.

Hi
This tutorial should help you get started and explain the difference between the two methods of creating a site - http://www.adobe.com/devnet/dreamweaver/articles/getting-started-with-jquery-mobile.html
PZ

Function types for Balance Sheet Planning missing in SEM-BPS 6.0

Hi BPS experts,
After upgrading our BI-system from SEM 4.0 to SEM 6.0 (level 10) as part of the upgrade from BW 3.5 to BI 7.0 (level 15), the BPS function types for balance sheet planning are not available in the planning environment (Transaction code BPS0).
According to the SAP Library the balance sheet planning functions in SEM-BPS comprises of 6 standard function types - one of them is "Depreciation":
<a href="http://help.sap.com/saphelp_sem60/helpdata/en/0a/242537cedf2056e10000009b38f936/frameset.htm">help.sap.com -> Business Planning and Simulation (BW-BPS)</a>
Menu path: Business Planning Functions -> Functions for Balance Sheet Planning
In our existing SEM 4.0 we are using "Depreciation" and the functions based on this function type are of course short dumping when executed in our upgraded system (SEM 6.0) as the function type does not exist here.
Odd though - we do have the function type "Allocation" available in SEM 6.0, which should be delivered with SEM together with the Balance Sheet Planning function types (It is listed directly under "Business Planning Functions" in the SAP Library) .
I have tried to figure out whether we missed out on activating something during or after the system installation, but our basis consultant has not found anything in the installation guides related to this issue. Also I was wondering whether it could be a simple matter of activating some Business Content but without any luck.
Does anybody know why the Balance Sheet Function Types are not available in SEM-BPS 6.0?
Kind regards,
Lars
PS: Our system status is:
SAP_ABA     700     0013     SAPKA70013     Cross-Application Component
SAP_BASIS     700     0013     SAPKB70013     SAP Basis Component
PI_BASIS     2005_1_700     0013     SAPKIPYJ7D     PI_BASIS 2005_1_700
ST-PI     2005_1_700     0005     SAPKITLQI5     SAP Solution Tools Plug-In
SAP_BW     700     0015     SAPKW70015     SAP NetWeaver BI 7.0
FINBASIS     600     0010     SAPK-60010INFINBASIS     FINBASIS 600 : Add-On Supplement
SEM-BW     600     0010     SAPKGS6010     SEM-BW 600 : Add-On Supplement
BI_CONT     703     0007     SAPKIBIIP7     Business Intelligence Content
Message was edited by:
        Lars B Rasmussen

Hi Lars,
It seems not all the planning function from SEM BPS are available in BW BPS. Please check the links below: -
what is the difference between BW 3.5 BPS and SEM BPS 4.0
BW- BPS and SEM- BPS
SEM-BPS VS BW-BPS
BCS Doc
Regards,
SK

BI planning & SEM T-codes

Similar Messages

Maybe you are looking for