BI Plug-in does not correctly update Excel reports

Hello All,
I am having issues in that when I export to Excel 2010, the BI Plug-in will not refresh reports with rows that repeat, it still continues to merge the rows even though the reports are set up to repeat in BI Answers. Any help would be greatly appreciated.
Thanks,
Jacob Nguyen
Edited by: 948195 on Jul 24, 2012 8:56 AM

Hi Praneeth,
        Follow the link to get SSO fixed - make sure you did all steps without missing a one.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWwithSAPBOBI4.0CommonSemanticLayer(UNX)orBICS
       SSO.Enabled , SecSapr3 and default.logon must be configured at 2-3 different config files at your BO as only
       WEB-INF file configure doesn't do the job.
Thanks,
Suresh Reddy

Similar Messages

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

Thanks for your help.
Here are the RSS feeds:
http://www.solidrockvista.com/Podcasts/Lite/rss.xml
http://www.solidrockvista.com/Podcasts/Phat/rss.xml
And here are the iTunes pages:
http://itunes.apple.com/us/podcast/james-world-lite/id162059136
http://itunes.apple.com/us/podcast/james-world-phat/id162296074
Both Podcast Descriptions have typos.

ACL does not correctly order the permissions when they are updated

Outlook Connector sjab32.dll 7.1.228.0 sjms32.dll 7.1.228.0 sjui32.dll 7.1.228.0 sjtp32.dll 7.1.228.0
Problem: We have identifed an issue with editing calendar permissions using the Outlook Connector. Basically the calendar ACEs are evaluated on a first match basic. Outlook Connector does not correctly order the permissions when they are updated. A brief example is below. Editing permissions via UWC works fine and will in fact fix any out of order ACE entries.
Basic calendar permission:
1.aces=@@o^a^rsf^g;@@o^p^rw^g;@@o^c^wdeic^g;@^a^sf^g;@^c^^g;@^p^r^g^
after adding user mab, Ace has now been re-ordered so that the everyone permissions are now before the owner permissions:
2.aces=mab^p^r^g;mab^c^rwd^g;mab^a^rsf^g;@^c^rwd^d;@^c^^g;@^p^r^g;@^a^sf^g;@@o^c^wdeic^g;@@o^p^rw^g;@@o^a^rsf^g
any suggestion as to why this re-ordering is happening when updated through OC and any supporting doucuments for ACL

Hi,
This issue is most likely related to bug #6471869 (Outlook Connector allows invites to users with restricted permissions). This has been fixed in the latest Outlook Connector 7.1_233 (aka 122018-09). I recommend logging a Sun support case to get a copy of this new release.
Regards,
Shane.

Real player plug in does not work

I have the latest version of Firefox and I have real player configured properly to work with the Firefox browser. I can use the Realplayer plug in to download videos via IE7 but the plug in does not work with Firefox 5. I followed all the troubleshooting listed on the Mozilla support page and the issue remains. Any help is appreciated. Thank you.

You don't say on what Mac, and you haven't actually asked a question, but perhaps this might be helpful:
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Note that the latest Flash Player update only works on YouTube with Safari in 32 bit mode - until YouTube correct this.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Flash player plug-in does not work

flash player plug-in does not work

You don't say on what Mac, and you haven't actually asked a question, but perhaps this might be helpful:
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Note that the latest Flash Player update only works on YouTube with Safari in 32 bit mode - until YouTube correct this.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Report does not show updated data

Hi,
We are currently testing our AV implementation.
AV server, agent and collectors are up, but the reports are not being updated.
Reports are showing data as of Dec-22-2009, which is when the last time the unix servers (for both AV and source dbs) were rebooted.
We can see collection is happening:
SQL> select max(av_time) from avsys.av$rads_flat;
MAX(AV_TIME)
19-JAN-10 12.34.41.150446 PM
But the dw table is not being updated:
SQL> select max(av_time) from avsys.audit_event_fact;
MAX(AV_TIME)
22-DEC-09 04.58.55.255456 PM
Does anybody have any idea?
thank you

hi Karun,
correction, there are a couple of trace files after the db was restarted prior to starting AV and the collectors.
below are the message content:
trace file #1)
Instance name: AVDB
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Unix process pid: 24635, image: oracle@audit1
Dynamic strand is set to TRUE
Running with 2 shared and 48 private strand(s). Zero-copy redo is FALSE
trace file #2)
Instance name: AVDB
Redo thread mounted by this instance: 1
Oracle process number: 30
Unix process pid: 24922, image: oracle@audit1 (TNS V1-V3)
*** ACTION NAME:() 2010-01-19 14:39:46.215
*** MODULE NAME:(sqlplus@audit1 (TNS V1-V3)) 2010-01-19 14:39:46.215
*** SERVICE NAME:(SYS$USERS) 2010-01-19 14:39:46.215
*** SESSION ID:(213.1) 2010-01-19 14:39:46.215
kwqmnich: current time:: 22: 39: 46
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
what could this mean?
thank you!

WMP plug-in does not working on Mozilla Firefox 4.0 on Win 7 as it was working on 3.6

on Mozilla Firefox 3.6 the above mentioned plug in was working on Windows 7. After updating to Mozilla Firefox 4.0 the plug-in does not working so i cannot hear some web radio stations e.g. www.melodia.gr

I solved this by turning off tamper protection in NAV 2010. The Firefox immedately updated. I understand virus scanners/anti spyware program like spybot and SpySweeper can interfere with updates. Also Comodo AV. It seems to me that nything that protects over all system setting is worth looking at.
I am not an expert. Do not forget to turn back on anything turned off to allow update'''

Dispute case does not get updated with subsequent partial payment

Hi Experts
I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
Process step 004: Change not possible, process step 003 missing
Message no. UDM_MSG037
Diagnosis
The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
System Response
The dispute case could not be changed.
Procedure
In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
Your kind feed back is highly appreciated..
Regards
Mahmoud EL Nady

Hi
Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
Regards
Mahmoud El Nady

HT1414 My iPad does not automatically update the operating system. Under the general tab in settings there should be Updates, but there isn't. Advice plz?

My iPad does not automatically update the operating system.how can I accomplish this?

Your post says you are on iOS 4.3.2. You need to be at least at iOS 5 to have a "Software Update" capability on your iPad. Right now, you need to update your iPad using iTunes on your computer.
Plug your iPad into iTunes (current version: 11.0.4). Let it sync. Then choose "Check for Updates" from the iPad's summary page in iTunes.

Paypal plug-in does not work on Firefox

As with others I see, the Paypal plug-in does not work with Firefox
== This happened ==
Every time Firefox opened
== When I downloaded the app

This is a Paypal problem. Paypal has not updated their plugin to be compatible with Firefox 3.6.x. See the following (read the last paragraph):
[https://www.paypal.com/helpcenter/panels/solution/printSolution.jsp;jsessionid=tSQcMKWGhpC1gF5TscjTvqGgR89SSQy40mWymRYM12RX2PVG6rTL!1610223101?t=solutionTab&ft=browseTab&locale=en_US&brand=&segment=&ps=solutionPanels&solutionId=39780&highlightInfo=highlightInfo&viewMode=NORMAL&windowType=SAME&isRecord=false&highlightInfo=highlightInfo&t=solutionTab&ft=browseTab&ps=solutionPanels&locale=en_US&_dyncharset=UTF-8&countrycode=US&cmd=_help&serverInstance=9024&viewMode=NORMAL&windowType=SAME&highlightInfo=&isRecord=false&no_strip= What is the PayPal Plug-In and how does it work?]
I have seen some users posting that the plugin works with Firefox 3.5.x

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

Error "can not start the configuration in parallel does not correct"

Hello everybody,
I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
Thanks in advance!

Check this KB
1678498 - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

"Hyperion" menu item does not appear in Excel after SmartView Installation

Hi to all! When I first installed SmartView, everything was ok - "Hyperion" menu item appeared in Excel and I successfully established connection to Planning and worked with data in Excel. Then, once upon a time I happened to select all data through Ctrl+A in the data form open in Excel and tried to copy it to another worksheet in the same workbook, Excel threw out a message about some serious error and informed me that the Hyperion Add-on would be removed. So it was removed in fact. When I was reinstalling Smart-View, all the installation went smoothly but the "Hyperion" menu item did not appear in Excel again. I tried to reinstall both Excel and SmartView and rebooted the system several times but the Hyperion menu item still does not appear in Excel. Can anyone hint me on how to solve this? Thanks a lot in advance!

Hi, John! Thanks a lot! Your link led me to the thread in which the last post had the link Re: Smart View errors in Excel?! containing the "low-tech" 's instructions. It was these instructions that pulled me from underwater! Thank you so much and to that guy too! :)

Freight Charges does not correctly show Tax % / calaculate

Hi
When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
Somebody an idea whats wrong?
Thanks
Franz

Problem solved.
As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
So, for correct tax calculation, always make sure the posting date is entered before.
@SAP: Change the behavior with the default posting date, as it is in all other modules.
Best regards,
Franz

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Story does not correctly export fdx file with scene numbers? Bug needs to be fixed.

Okay, Even if i remove the scene numbers from Story and export the file to Final Draft 8. The format in incorrect. The "transitions" ex. CUT TO: are not in the correct allignment. Also there are numbers on each of the dialogues
Pretty much alot of the formatting is not the same. Spaces that break dialouge and action which are there in Story, are not converted over to Final Draft.
Please fix this as soon as possible.
thanks,
Rohit

BI Plug-in does not correctly update Excel reports

Similar Messages

Maybe you are looking for