BI Process chain monitoring from SOLMAN

Hi,
We have configured CEN in our landscape and successfuly managed to get data from satellite systems and getting alerts according to our requirement.
But for BI Process chain Monitor we are getting alerts of yellow MTE with text "Entire chain now has status 'A'", which is flooding our mailbox. We cant find any way to stop this and to receive mails only for failed process chains i.e. for red MTE.
Can you please help us in this?
Thank you,
Lena

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Similar Messages

DYNPRO_SEND_IN_BACKGROUND short dump in BW while calling Process chain remotely from APO

Hi,
While trying to call a process chain remotely from SCM APO system to SAP BW system - we are getting below short dump -
Short text
    Screen output without connection to user.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSDH4" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Checked the RFC connection between APO and BW system through SM59 and it is working fine - Can anyone pease suggest what configuration could be missing which might be causing this short dump.
Thanks in advance.

Additinal Data from Log -
User and Transaction
    Client.............. 200
    User................ "AQ1ALE200"
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "53F896E0992E0A50E10080000AF04150"
    Program............. "SAPLSDH4"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "AQ1"
    Database Release.... 701
    Kernel Release...... 720
    Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchronous and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
    Client.............. 200
    User................ "KANDIS"
    Transaction......... "RSPC"
    Call Program........."SAPLRSPC_PROCESSES"
    Function Module..... "RSPC_DESTINATION_F4"
Call Destination.... "BQ2CLNT200_DIALOG"
Error analysis
    During background processing, the system attempted to sen
    screen to a user.
    Current screen: "SAPMSSY0 " 0120.
How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DYNPRO_SEND_IN_BACKGROUND" " "
    "SAPLSDH4" or "LSDH4F09"
    "DISPLAY_LIST"
Information on where terminated
    Termination occurred in the ABAP program "SAPLSDH4" - in "DISPLAY_LIST".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 2205
    of the (Include) program "LSDH4F09".

How to perform process chain monitoring

Hi All,
can u send me the steps how to perform process chain monitoring and what to do if we get any error in any process in the process chain. if possible if any one have the screen shots how to do kindly send me that link.
Thanks & Regards,
Naveen

Transactions used to monitor the Process chains
RSPCM
SE38 >/SSA/BWT or ST13>BW-TOOLS
--> clic on execute --> select the process chains radio button --> execute
--> click on process chains -->if you want to monitor the specific process chain enter the process chain id or if you want to monitor the process chains that are running in a particular date and time interval simply enter the values and click on execute...
it will display the process chains status and time of the runs etc...

Process Chain Monitoring

Hi there,
ok i've found out that I can use rspc and rspcm to monitor my process chain.
but i don't really see any information on whether or when my process chain was triggered or not. all i see is information about when i did last changes and when i activated the chain, etc.
does that mean, it just was not triggered yet?
then i must have something wrong...

When you say it didnt trigger, is it waiting for a event..to run the process chain..
If it is the case, then you can go to SM37 and give in your selections for that event ..and look for any jobs ran or not.
Other way right click on your process chain and click on Dispaly all jobs..this shows all jobs if it ran..and also scheduled jobs if any..
I guess in your case check if it is ever scheduled..
Regards
Manga

To Automate Process Chain Monitoring

Hi All,
Currently we have process chain which extracts data from Informatica system and loads to BW DSO's.
After successfull execution of process chain daily, we download data from PSA, and display only company code, reference key and data packet.
We make a Pivot table in excel sheet to display only company code, refreence key and data packet.
When I plan to automate it, I have a problem. I have all data with PSA table (company code, reference key & data packet).
But I need to display data daily after execution of process chain. So the date is not getting captured with PSA table.
Can you please help me on the same.
Thanks.

I think for displaying the 3 fields on a daily basis, you need to select the request based on date and then filter out the fileds using a select query in your code.

Process Chain: upload from PSA after activation of another ODS

Hi gurus,
i have a follow problem: for upload of ITM ODS i must before upload the HDR ODS. For the performance optimization of related process chain, the process:
1) upload of HDR ODS from 2LIS_02_HDR
2) upload of ITM ODS from 2LIS_02_ITM (ONLY PSA)
are PARALLEL process.
After activation of HDR ODS and upload of ITM PSA, with AND process, i upload data from ITM PSA to datatarget, but there is an process chain error:
"No ods activation process can be in front of process PSA read and update data target in the chain" !!
Could you help me?
Thanks in advance!
Bye!
Ferdinando

Hi,
Have you tried this format.
1. Upload HDR (PSA Only)
1. Upload ITM (PSA Only)
2. AND
3. Update HDR (PSA to DT)
4. Activate HDR
5. Update ITM (PSA to DT)
6. Activate ITM
With Regards

To Make Process Chain Green From Red

Hi Guys,
can any one help in this..
i have a one Process chain at one step i.e DTP got failed and the below steps got success. i manually executed that DTP because the below steps are already successed.
Now in the Process chain it shows that DTP step is failed and other steps are success and Process chain is showing as RED, now i want to make that Process chain as Green. what i need to do?
i did the following steps even it is showing red in the RSPCM screen.
i_logid
i_type
i_variant
i_instance
i_state as 'G'
in the se37 using function module RSPC_PROCESS_FINISH
Thanks,
Naresh

hi,
you cannot change the status of the process chain as one of the step in it is red and the status of that red step was not changed. Why do you want to change the status of the chain? do you want to trigger some other chain, if yes then the Se38 program would have already triggered it. If you only want to change it to green to see it in RSPCM it is not possible.
regards,
Arvind.

Daisy chain monitor from cinema display MacBook Air 5,2

I know the Mid-2012 MacBook Air is capable of 2 external displays as described here.
The monitor works when plugged directly into the MBA, but not when daisy chained from the back of the cinema display.
It's a dell monitor, and I'm using an Apple Thunderbolt-VGA adaptor.
Is there something I'm missing? Thanks!

As far as my question itself -- why does this happen? Has anybody had this issue on Lion and had it resolved on Mountain Lion?

Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

Business Object system monitoring from SOLMAN

Hi,
We have recently installed SAP Business Objcts in a seprate system and now we want to include this system in SOLMAN for early watch alerts.
can any one provide the document/setps on how to include our Business Object system in SOLMAN.
Thanks * Regards,
KVR.

Kasi
I could not find any BO specific talks about SolMan and EWA in particular
Did you already tried to add the system like a regular NW based system via SMSY? I guess you can use the regular procedure here
Nesimi

Monitoring BI PROCESS CHAIN with Solution Manager BPMON

Hello,
I'm trying to setup the monitoring of BI process chain using the BPMON
I setup the process chain monitoring using BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
but than I'm not able to read the process chain names,steps,and variant from satellite system
On other systems,using different application monitor (like PI MONITOR) is working fine
i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
My bi system is 7.01 EHP1 sp4
solution Manager is 7.01 EHP1 SP20
Any suggestiions?
Thanks
Marco

Hello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker

Process Chain Red 'X', Exec Infopckg Yellow, Infopckg monitor/data correct

Dear and respectable colleagues of the forum,
I am experiencing a problem in a process chain when executing infopackages. The process chain has 6 "Execute infopackage" processes. Sometimes (1 of 4 attempts average) my process chain ended with red color with 'X' status in the Process Chain Display Log View.
Reviewing within the chain Log, there is one of the "Execute infopackage" processes that appears in yellow color (it loads from direct update ODS to an infocube). However, revising the Logs for its corresponding Infopackage execution I found that it says that "Data successfully updated". Moreover, If I review the data loaded it seems to have been loaded correctly.
Then, Why does the "Execute infopackage" process in PC finishes with yellow color if the Infopackage execution itself finishes correclty?
To complete the whole scenario: I execute this process chain every night from an Abap program; the program has a Loop that traverses a table, and executes the process chain as many times as the quantity of rows in that table (table has 10 rows meaning offices). As you can understand, the chain is executed 10 times, and the error occurs in any of the 6 "Execute infopackage" processes indistinctly.
I review ST22 and SM37 for all users for the datetime when the error occured butnothing bizarre was reported. It is left to review SM21.
The following is the detail of messages.
Logs for Execute Infopackage
   Data successfully updated
Monitor of Infopackage
Details Tab
     Requests (messages): Everything OK
     Extraction (messages): Everything OK
     Transfer (IDocs and TRFC): Everything OK
     Processing (data packet): Everything OK
       Data Package 1 ( 45 Records ) : Everything OK
         Transfer Rules ( 45 -> 45 Records ) : No errors
         Update rules ( 45 -> 45 Records ) : No errors
         Update ( 45 new / 0 changed ) : No errors
         Processing end : No errors
     Process Chains : Errors occurred
       Llena cubos de carteras vtas sec por distrib - autom

Dear s v desh,
I am on SAP BW 3.5, I already checked the cube and it is green - all right.
The message in the infopackage excution node in the process chain says (non-error):
"Data successfully updated"
The error message in process chain monitor (log) says:
......"Overall status: Error occurred: or: Missing messages
............Process Chains : Errors occurred"
I just realized that there is no messages at all in the infopackage monitor (log).
I have received a clue, someone asked me to review note 1396417, and I will.
Regards
Juan Alonso Teevin

Process Chain Status Red, DTP status yellow, DTP is green from inside

Hello All,
I have a problem where the Process Chain status is red, but the process(DTP) status is yellow.
When I right click on the yellow process there is no error message and the DTP is green in Process Monitor.
But the chain did not complete and the rest of the process steps are grey.
After 20 minutes the Process Chain ran again(automatically after new data arrived) and this time without errors and it went green.
My question is, how to proceed with the red Process chain and complete the further process and make it green.
Regards
Alex

hi,
There are scenarios where you need to change status of a process chain or a particular step in process chain.
You might need to change the status in the cases where we need mark these steps successful so that dependent steps get processed. There are other scenarios where one needs to change the status of a single step in the process chain or status of whole process chain.
Step by step instructions on change process chain status
1. Right click on the failed step in the process chain monitor and go to displaying messages
2. Go to u2018Chainu2019 tab and note down variant, instance and start date
3. Go to SE16 and the table RSPCPROCESSLOG and enter variant, instance and start dates from step 2 and note down log_id, type, variant, instance.
4. Go to SE37 transaction and execute the function module RSPC_PROCESS_FINISH and enter the values from step 3 and enter the new status u2018Gu2019 in status field and execute the FM
5. This sets the status of the process chain (PC)
After you set the status using the FM, go to the monitor screen of the process chain, you will notice the changed status. Now dependent steps in the process chain will start running
Thanks

Process chains failing - There is no path from LOADING (ipak) to PSAPROCESS

Hello
In the load process type of my process chain I am loading till PSA.
I am using the process type - update from PSA for 3 ODSs and loading all of them to the cube. one of these three process types is finishing successfully. For rest of the two I get following errors:
1. There is no path from [IPAK name] to PSAPROCESS [variant name]
2. Variant doesnot contain a valid combination request/data target
For the two process types which are failing, the request is not being picked up from PSA. Can you please suggest what can be the reason and how to fix it?
Thanks & Regards
Shreyas

Hi Shreyas,
How is it going on today , is there any change or same thing happened?.
I hope you have followed the below steps for re activation and schedule.
1. Go to process chain maintain view and in the menu option
Process Chain --> "Remove from schedule".
2.Process Chain --> "Activate" .
3.Process Chain --> "Activate and schedule" ( Note: Don't do this step If it is immediate start )
If the above steps does not work may be you can do one more thing , that is copy the whole process chain in to new one and create a new start event .
I had seen this type of errors and after activate and schedule it went fine.
Hope this will help.
Cheers
Manju

How to load delta to 2 target ODS 's from a single ODS using process chains

Hi BW Gurus
I am having a current ODS based on 2LIS_02_SCL, deltas also are working fine for it.
our requirement was based to have 2 target ODS on this existing ODS by using export generate datasource.
I have to build a process chain that should enable us to load delta in our target ODS.
Earlier manually for DEV purposes ,i was using the Update data into data targets from the source ODS, this was enabling us to load deltas. But to automate this process we will require a process chain.
Finally , is there any process type in process chain for " Export generate Datasource".
please suggest a good methodology for this scenario.
Thanks in advance.

Hi Ashfaq,
Loading from ODS to CUBE is same as loading from datasource to ODS only.
1. Create export datasource.
2. Create update rules from ODS(export datasouce) to CUBE.
3. Create infopackages(if you dont want to use generated once).
4. include infopackage in process chain to load fromODS to CUBE.
Intialize first manually and change settings in process chain infopackage to "Delta".
5. You can append/enhance existing process chain(loading from datasource to ODS).
Hope it Helps
Srini

BI Process chain monitoring from SOLMAN

Similar Messages

Maybe you are looking for