BI Pub Install for CM 14
Has anyone gotten BI Pub to install correctly on a SQL database and Windows Server? I run the RCU and have no problems. My install works great on BI Pub until I get to the configuration steps. It fails on "Setting up database connection". Has anyone gotten through this without errors?
Yes. These are the steps I took: -
1)
Create a new SQL Database using the following specifications:
1. Database version is equal to or higher than 2005.
2. Database user (db_owner) should have SYSDBA or DBA privileges.
3. The read_committed_snapshot option must be turned on.
4. Database must be configured to use case sensitive collation. The following
5. command can be used to set the proper collation:
6. ALTER DATABASE <db_name> COLLATE Latin1_General_CS_AS
2)
Create a New Repository with RCU
3)
Install BI Publisher 11g. There are multiple install options for BI Publisher 11g. In most cases, a “Simple” install is sufficient.
4)
Change the default security model:
1. Go to the BI Publisher login page at http://<BI Server>:<Port>/xmlpserver/
2. Log into BI Publisher as weblogic/<weblogic password> (created during the install above)
3. Click the Administration link (top right corner)
4. Click Security Configuration under Security Center
5. Change the Security Model to “BI Publisher Security”
6. In the password field, type Administrator
7. Place a “check” next to Enable Local Superuser
8. Fill in a username and password, For example: bipubadmin/bipubadmin
9. Click Apply
10. Restart the server
5)
Configure a JDBC Data Source within BI Publisher:
1. Log into the BIP web site. Example: http://biserver:7001/xmlpserver
2. Click the Administration link towards the top right hand corner.
3. Locate the Data Sources section, and click JDBC Connection.
4. Click Add Data Source.
5. Fill out the appropriate required information. For MS SQL db it will be like this:
i. Data Source Name: Enter a name for your data source. It’s good practice to enter in a name that helps identify the schema being connected to.
ii. Driver Type: From the drop down, select the appropriate Microsft SQL driver type (Microsoft SQL Server 2005 or Microsoft SQL Server 2008)
iii. Database Driver Class: This will be auto-populated once the driver type is selected
iv. Connection String: This should be populated in the following format: jdbc:hyperion:sqlserver://[hostname]:[port];DatabaseName=[DBName]
Example: jdbc:hyperion:sqlserver://10.140.187.87:1433;DatabaseName=MSSDB1
v. Username: Enter the owner of the schema being connected to. Default: exp
vi. Password: Enter the schema owner password. Default: sql
6. Click Test Connection. If successful, then proceed, otherwise fix any mistakes and test connection again
7. Click Apply to save the data source.
Similar Messages
-
What download is good for Firefox 33 for silent install for windows os?
In fire Fox 33 download we see there is setup stub .exe , when will setup.exe for firefox 33 be available as we cannot do a silent install for setup stub.exe . we have no issues in doing silent install for setup .exe which we had for previous versions , also where we can find the download for firefox 32
Older releases can be found on the Mozilla CDN server, but keep in mind that older versions are not safe to use on internet as they have disclosed security vulnerabilities.
*http://download.cdn.mozilla.net/pub/mozilla.org/firefox/releases/32.0.3/
*https://www.mozilla.org/security/known-vulnerabilities/firefox.html
*https://www.mozilla.org/security/known-vulnerabilities/firefoxESR.html
You can also look at the Firefox 31.2.0 ESR version if you want to use an older version that is up to date:
*https://www.mozilla.org/en-US/firefox/organizations/all.html
*https://www.mozilla.org/en-US/firefox/31.2.0/releasenotes/
*https://www.mozilla.org/en-US/firefox/organizations/system-requirements/ -
I need an offline install for firefox v26, can you please advise where I can get this?
I need an offline install for firefox v26, can you please advise where I can get this?
Hi haydenr,
It's best to use the latest version of Firefox if you can, but you can download Firefox 26 here:
http://download.cdn.mozilla.net/pub/mozilla.org/mobile/releases/26.0/android/
Just choose your locale (British English is en-GB, American English is en-US, etc) and then click the link for the apk file. :)
Hope that answers your question! -
Cannot execute Install for database ORACLE_HOME
Dear ALl,
EBS 11.5.9 with Windows 2003, during multi-node installation error.
log file
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.9.21
>> Install session started : Fri Jul 25 17:41:05 GST 2008
>> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : sysd.apps.com
Host Operating System : Windows 2000
User running Install : applmgr
=================================================================
InstUpgPanel - User chooses to Install Oracle Applications
NumNodesPanel - Multi-node Selected
SIDSeedPanel - The PROD database is set to PROD fresh install database
ProductPanel - The following are the selected Product Groups for instance PROD
Basic
E-Business Intelligence
Marketing
TeleSales
Field Sales
Order Management
Inventory Management
Purchasing
Discrete Manufacturing
Process Manufacturing
TeleService
Service Contracts
Project Costing
Project Billing
Financials
Human Resources
ProductPanel - The following are the selected Product for instance PROD
0
160
190
265
601
174
175
690
874
709
454
452
450
558
451
530
517
520
549
670
691
882
521
676
880
696
697
660
522
544
869
676
279
697
660
702
401
665
673
401
665
201
202
250
401
702
703
704
705
706
712
550
551
552
553
554
555
556
557
514
511
542
862
696
872
170
866
518
515
510
870
524
542
275
275
101
140
200
222
240
260
600
8400
8401
8450
8901
231
673
800
804
8301
8302
TerritoryPanel - The following are the selected settings for instance PROD
LanguagePanel - The following are the selections from the Language Panel:
US - American_English
US - American_English
US7ASCII
US7ASCII
AMERICA
MultiNodePanel - Selected nodes:
[Ljava.lang.String;@eddac
[Ljava.lang.String;@7b7565
[[Z@583cf4
QuickPanel - Empty Fields were encountered. Number of empty Fields:1
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory created:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.apps.com
Ping request could not find host sysm.apps.com. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
appsa.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME available:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory available:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.appsa.com
Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
Ping statistics for 208.87.33.150:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 295ms, Maximum = 295ms, Average = 295ms
host.domain ping has suceeded
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Install Oracle 9i technology stack for PROD.
Install Oracle Applications Database Seed for PROD.
DoInstallPanel - User continued install at warning dialog.
DoInstallPanel - Beginning install for all users.
Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
APPL_TOP location: e:\oracle\prodappl
Database ORACLE_HOME: e:\oracle\proddb\9.2.0
Database SID: PROD
Database Context Name : PROD_sysd
Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Total number of processes in Current Install 3
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
"Database ORACLE_HOME installation succeeded"
e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please guide.Hi,
Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
------------------------------------------ -
Custom Install for Production Computer
Hello, I have a few rather simple questions that I am hoping someone can help me with...
1. I am adding a new MacPro to the mix for production work (photoshop, Indesign, Lightroom etc..) and I would like to drastically dumb down the machine to just run a few graphic/image programs. I don't want it to have anything else installed (garageband, mail, ICal etc....)
I will have it connected to the internet so I am able to update the software but I don't want it to have any browsers installed for internet access.
It has been a few years since I installed my OS and I can't remember exactly what the options are....So what I am wondering is what is the best way to do this? Can I choose not to install them when the system arrives "preinstalled" or should I just uninstall everything that I do not want?
I know this seems like a simple question but I do not consider myself a computer wizard.
2. On my current machine I have a lot of customization such as keyboard shortcuts, photoshop actions, program settings etc.... is there a way to transfer that information easily over to the new machine, since it will be configured very similar
3. I plan on getting the machine with the 640Gb drive but I have considered putting my 250gb SATA2 drive in slot one to keep the OS and software separate and then moving the new 640Gb to slot 2 just for file storage. My reasoning for this is I am currently not using that 250Gb drive and it would give me a little more space...and probably keep my system a little cleaner. is there any advantage/disadvantage to this?
4. I don't know a whole lot about disk images but could I essentially create an image of the 250Gb main OS drive and then if I ran into any sort of hard drive failure I could replace the drive, restore it and that way I wouldn't loose all of my custom settings? The 640Gb would be copied daily to an external drive (I have a RAID setup in my current machine with 2 1Tb drives but I do not want to RAID this machine).
Basically I want to try and have this system set up in the most optimal way to protect my data, keep everything clean and run my programs smoothly.... so any tips or advice would be greatly appreciated...
Hope that makes sense... Thanks!Thanks so much for the responses they are very helpful.
Samsara
I do already have Chronosynch and it appears that is very similar to Super Duper?
From what I gather is Time machine requires a drive approx 3x larger?
Thanks I will look into Diskwarrior... I have never heard of it.
The Hatter
1. I do have other computers with internet access, this one I am just trying to isolate because in all honesty the internet can be a huge time waster for the bored or undisciplined...
Am I missing something I may require a browser for other than surfing the internet? I can do all software updates within the program.. But I would sure hate to remove it and then need it... although I can always reinstall.
2. thanks
3. Thanks.. makes sense
"I'd pull the 250GB as backup external off line, and fill the machine with 3 new drives for media, libraries, projects, scratch, editing."
Could you please explain more about the above?
No, I am not using Lacie drives. My RAID drives are Seagate Barracudas and it is configured in Disk Utility... and I am obsessed with backups.. I run a Chronosynch backup every few days of my whole 1tb drive... it is kept off site and I also have dvds of source files kept off site as well... I have even been known to carry a set of dvd's in my car or memory cards in my pocket so I have a duplicate off site copy just to run to the store in case the house burns down... lol. But I appreciate the concern. -
Is there a 64 bit install for Adobe Reader?
Hello,
I want to make a note that I did a search on the form, using the following text
"Is there a 64 bit install for adobe reader?"
And I did not find my answer. That is why I'm posting this as a question.
So, with that out of the way....
I am getting ready to build a new computer for myself, and will be running Windows 7 Enterprise 64 bit. Before I begin, I want to make sure I have all of my software that I want installed, and I am doing research on each program to see if there is a 64 bit version that can be installed. What I would like to do is have as many as my programs that I install be 64 bit as possible. I know that not every program will be 64 bit, but I did want to get as many of them as possible to be 64 bit applications.
As I do want a PDF reader on my computer, and I have used Adobe Reader for years, I started looking on the web site to download the current version. However, I did not see any place that I could download a 64 bit version of Adobe Reader.
That is why I'm here asking. Is there a 64 bit version of Adobe Reader that I can download? If so, where is it on the web site?
This does lead me to a follow up question. Is there a 64 bit version of the Flash Player, as well as the Shockwave player? If so, where can I download them from as well.
Thanks in advance,
--Brian Plencner
[signature deleted by host]Again, I think you need to check the Microsoft web page, as I was able to find 64 bit versions of IE8 for download.
The URL to access the page is
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie-8
From that page, I am able to select a 64 bit version of IE 8 for the following Operating Systems
-- Windows XP 64 Bit
-- Windows Vista 64 Bit
-- Windows Server 2003 64 Bit
-- Windows Server 2008 64 Bit
Windows 7 is not listed as an option as it already comes with IE8 installed by default.
Looks to me that Microsoft has already released a 64 bit version of IE8.
In fact, I went ahead and downloaded IE8 for Windows 2003 Server x64 bit, and looked at the details of the file. Each microsoft download has a digital signature associated with them, showing a date and time of when the exe was built.
According to what is shown below, IE8 for Windows Server 2003 has been around since Sunday, March 08, 2009.
So, what has adobe been doing since March of 2009? IE8 has been 64 bit for well over 2 years now (it will be 3 in March of 2012). While I know that it does take time to develop new applications, I don't think it would take 3 years for Adobe to come up with a 64 bit version of Reader that could have been built under the 64 bit platform.
--Brian -
ITUNES 10.6 is not installing for windows 7
ITUNES 10.6 is not installing for windows 7;
Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules
-
Help: what meaning of some fields in INSTALL [for install] fields ?
Hi all,
I don't understand some fields in Data field of INSTALL [for install] command.
There is section *"A.1.1.4.2.1 - Toolkit Applet Specific Parameters "* of specification +3GPP TS 23.048 V5.9.0+
*Presence Length Name*
Mandatory 1 Length of Access Domain field
Mandatory 1-p Access Domain (see A.1.1.4.2.3)
Mandatory 1 Priority level of the Toolkit applet instance (see A.1.1.4.2.4)
Mandatory 1 Maximum number of timers allowed for this applet instance
Mandatory 1 Maximum text length for a menu entry
Mandatory 1 Maximum number of menu entries allowed for this applet instance
Conditional / Position of the first menu entry ('00' means last position)
Conditional | Identifier of the first menu entry ('00' means don't care)
Conditional
| ….
Conditional | Position of the last menu entry ('00' means last position)
Conditional \ Identifier of the last menu entry ('00' means don't care)
Optional 1 Maximum number of channels for this applet instance
Optional 1 Length of Minimum Security Level field
Conditional 0-q Minimum Security Level (MSL) (see A.1.1.4.2.5)and more description like this:
The position of the new menu entries is an absolute position among the existing ones.
A part of the item identifier shall be under the control of the card system and the other
part under the control of the card issuer. Item identifiers are split in two ranges:
- [1,127] under control of the card issuer;
- [128,255] under the control of the toolkit framework.
If the requested item identifier is already allocated, or in the range [128,255], then the
card shall reject the install command. If the requested item identifier is '00', the card shall
take the first free value in the range [128,255].These pair fields *"Position of the first menu entry ('00' means last position)"* and
*"Identifier of the first menu entry ('00' means don't care)"*.
What purpose do these fields describe? Let give some example for me!
Thanks,
HoaND
Edited by: hoaibaotre on Oct 27, 2011 10:21 AMYou give us no clue about what you used to record/playback scripts
-
I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ -
HT1338 how do you perform a clean install for imac
How to perform a clean install for imac, because I cannot upgrade to version 10.6?
Here are the technical requirements for Snow Leopard:
http://support.apple.com/kb/sp575
If your iMac meets the requirements, then you will have to purchase the Snow Leopard disk from apple:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
To reinstall your OS, insert the original OS disk that came with your iMac and start up the iMac holding the C key. Start the installation process and when you see the menu bar, select 'Utilities'. From the drop down menu, select Disk Utility. Erase the HDD and the continue the installation.
Note that this will erase all data on the HDD so have it backed up before you start.
Ciao. -
I uninstalled adobe flash player from my Mac Leopard OS X 10.5.8 and need to get a new version but it asks for the 10.6 before installing and apple won't accept it or the installation is not complete. Now I have no adobe and can't access any apps period without that and the plug-in. The directions are too confusing.
Okay, a few comments... first, that tech at Future Shop has his numbers wrong. As of January of this year, according to my testing, Norton is actually only 73% protection against currently-active Mac malware. That's pretty darn bad, especially when you factor in the fact that Norton is well-known for causing problems. You may think Norton hasn't caused you any problems, but if you've had it installed for 15 years, you'd probably be shocked at how your machine would perform without it. It's probably a large part of the reason that you keep seeing that rainbow wheel cursor.
If Norton's log shows no malware, that doesn't mean Norton caught it, it means Norton never saw any malware to begin with. Which, since it's not so good at spotting it, doesn't really mean much.
Mac malware is rare enough that you've probably never seen any. However, note that running an outdated version of Flash is one of the dangerous things that could change that. Insecure versions of Flash were known earlier this year to be exploited by Mac malware. All you'd have to do is visit the wrong website and you'd be infected.
For this reason, regardless of what you do about anti-virus software, I strongly advise that you not install one of those outdated versions of Flash. If your computer is able to run Mac OS X 10.6 (Snow Leopard), you should upgrade to that system, then update it fully (Apple menu -> Software Update). Not only is there no known malware currently capable of infecting a fully up-to-date Snow Leopard system, but you'll also be able to run a more secure version of Flash.
You can purchase Snow Leopard here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
Clarification on Bootcamp 3.1 install for Windows 7 Support
Hello all,
I'm looking for some expert opinon on how the BootCamp 3.1 update is supposed to be performed.
As some 3rd party websites state that these updates need to be applied prior to the Windows 7 install. While Apple's online documentation talks about installing 7 and then doing the update.
The reason why I think that apple's process is more accurate is because the 64-Bit driver download is an ".exe" extension. However before I do anything with my MacBook Pro I wanted to find out what others are doing for this OS install process.
If you could clarify the process it would be appreicated as the Software Update feature in Mac OS X doesn't seem to find any updates related to BootCamp.
Thanks in advanceSo what you are saying is that even though the bootcamp utility exists and has already allocated my spot for Windows 7 on Snow Leopard Boot camp doesn't exist thus I can't get the 3.1 update yet?
I'm very familiar with computing terms, and setting up devices... However no documentation really clarifies the whole 3.1 process. All that I can see from apple's perspective is to allocate the bootcamp space. Run the windows 7 install, and then use the snow leopard update and the assoicated drivers (32/64 bit).
However even with the Mac OS X online, I can't figure out how you get that update as each site talks differently.
If someone can clarify exactly from an out of box Mac, to snow leopard boot camp allocation and windows 7 install for these 3.1 updates it would greatly help with my confusion points here.
Thanks! -
my imac is running mountain lion and last night i downloaded maverick. in midst of installing it, it said a powerPC app microsoft word would not work so i canceled the install for the time being. my questions is if i choose to finish installing maverick does that mean i will nevver be able to access word documents stored on my desktop? or do the word docs automatically convert to pages or what? i am so confused. would i be better off just sticking with mountain lion and send the maverick install to the trash? hoping someone will be able to answer my question though i am afraid the response is likely to be just stick with mountain lion so you can keep using word. i had been looking forward to maverick but it seems pretty drastic to not have access to microsoft word anymore by switching to maverick. hope someone has an answer so i can have the best of both worlds so to speak!
thanks for your response Csound1 on the peninsula ... if i go ahead and install maverick and then download LibreOffice or OpenOffice will i then be able to access old microsoft word saved documents on my deskstop through those two free alternatives? i am not that knowledgeable about these things so i am not sure if you are saying i will just be able to use libreoffice or openoffice for creating new documents or whether i can access the saved microsoft docs? are they transferred to OO or LO or what and if editing of the old word docs is needed can i do that through the OO and LO programs or apps (see i am not even sure if i am using the correct vocabulary!) hope you can answer this as quick as the first question, so i can decide to stick with mountain lion and trash the maverick install or proceed with maverick install and hoppe that my microsoft word docs are still accessible through OO or LO or adding to myquestion will pages on maverick be able to open the old word documents? thanks again!
-
I'm going to install SSD in my Macbook pro, how do I install for example OSX Lion? I dont have any CD with OSX Lion as far as I know.
Ideally, you should clone your HD as Bimmer 7 Series explains.
However, if your computer originally shipped with Lion or Mountain Lion, a clone is not necessary to merely reinstall OS X. OS X Internet Recovery will create a recovery partition, download the installer package, and install it on a completely empty SSD or HD.
Even if your computer shipped with Snow Leopard, it may be eligible to download a firmware update that creates the same ability: http://support.apple.com/kb/HT4904 -
My ipad automatically tried to update skype. It has been installing for 3 days and the message waiting is on the icon. I am unable to delete skype to try and re install. I have gone to the licence page but there is nowhere that I can agree the terms as it is still trying to load.
delete the app on itunes (on PC) then download it again.
Maybe you are looking for
-
Hi Please guide me about creation of document types for PR/PO. If i want to create document type for the capital item as say ZCAP. What are the item categories I should select. Also how does the item category affects the document type and further cre
-
Automatic payment transactions to allow for refunds
Require a reason code functionality when raising credits to improve reporting to determine why values are paid back
-
Pre7- A Preview question.
Hi all, Is there a way to preview what will be the end result on computer monitor, without burning a dvd? Would a video card allow me to add a small 13" TV output to monitor the end result? Many thanks! Raj
-
Keep receiving closed alert upon server reboot
I have a new deployment of SCOM 2012 installed on a 2012 R2 windows servers. I am using SQL 2012 R2 standard edition. Every time I reboot the server I get a notification with a resolution state of 'Closed'. If I check the alert the 'New' alert was cr
-
Your Battery Life after Lumia 800 Update
Hi, I recently updated my Lumia 800 to firmware (1600.24838106.11500) and my battery life is much much better. However, I am still not seeing an expected fixed full charge of ~ 1502mAh, which it had before the update. Nokia says it may be an issue wi