BI Publisher - Install error - Windows 7 64Bit

Hi All,
I am trying to install BI Publisher on Windows 7 64Bit in a VMWare virtual machine.
OS: Windows 7 Professional 64bit
BIP Version: bipublisher_windows_x86_101341.zip
VMWare Workstation Version: 7.1.0
JDK Version: 6_21 (both 64 and 32 bit versions are installed)
Oracle DB: OracleXE
When I run setup.exe (in the install folder) the following is put into the log file:
Using paramFile: C:\BIPublisher\bipublisher_windows_x86_101341\Windows\Oracle_Business_Intelligence_Publisher_Standalone\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1
Passed
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB. Actual 25444 MB Passed
Checking swap space: must be greater than 500 MB. Actual 1999546068MB Passed
All installer requirements met.
The MSDos window then says "...please wait" and then a windows message comes up saying:
"Setup.exe has stopped working"
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     setup.exe_unknown
Application Version:     0.0.0.0
Application Timestamp:     459bb902
Fault Module Name:     StackHash_cb5a
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     00000000
Exception Code:     c0000005
Exception Offset:     00002022
OS Version:     6.1.7600.2.0.0.256.48
Locale ID:     1033
Additional Information 1:     cb5a
Additional Information 2:     cb5adf8f5bac4bc39db6c83fb76b8021
Additional Information 3:     b629
Additional Information 4:     b6294e8956d765fe790565edb94347ea
Any ideas?
Thanks
Patrick

Hi Pieter,
Thanks for the hints. However, the installation still fails with the same symptom.
I also tried it on a virtual machine that was set up with Windows XP (SP3) with no luck. Setup.exe fails to run and I cannot find anything useful in the log files that I can find.
The virtual machines that I am using are basic installs. I install the OS, JDK 32 bit and then BI Publisher. I just want a "basic" installation. Is there something missing?
By the way, I installed BI Publisher several years ago on a Windows XP 32 bit computer with no problems. I am trying to install this on a 64 bit computer, could this be the problem?
Any thoughts?
Cheers,
Patrick

Similar Messages

  • Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*

    Greetz,
         I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF050, DW063 ... WARNING: DF029 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 1 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    ERROR: DF050: ARKServiceControl::ModifyService failed while saving previous service configuration.(Seq 6)
    ERROR: DF050: ARKServiceControl::ModifyService failed for service SwitchBoard. Error 2 The system cannot find the file specified.(Seq 6)
    ERROR: DW063: Command ARKServiceControlCommand failed.(Seq 6)
    ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 3(Seq 1)
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 1 Exit Code: 3 Service Specific Exit Code: 0(Seq 1)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed
    Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
    My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
    Thanks in advance.

    Thank you for the reply. I will try the steps listed in the document you linked me to. In case any of the procedures works, I will mark your post as "Correct".
    Thank you, once again.

  • Install error Windows 8.1 0xC1900101-0x20017

    Hello,
    I'm in charge of the PCs of a medical office, in France (sorry for my English).
    Computers were under Windows 8 without any problems.
    I made the migration to Windows 8.1 without bug for all computers except one.
    This is a laptop Asus X50VL which was updated from Vista to Seven and then Windows 8 which
    works perfectly on it.
    I've tried almost 20 times to upgrade to Windows 8.1 after many tests : clean boot, deactivation of many services, uninstallation
    of all programs and devices, etc... The procedure for upgrading to Windows 8.1 through the store always gives the same result: 0xC1900101 - 0x20017 error.
    I've tried all the solutions described here : Fix 0xC1900101-0×20017 Windows 8.1 Setup Error
    I even formatted the hard drive , and made a new installation "clean install" of Windows 8, based on the original DVD (with no problem), without installing third
    party software, but still the same result.
    I give you access to report files here :
    https://skydrive.live.com/redir?resid=DA5CC4923798CC18!24815&authkey=!AF_Rgqo3FD9DPFs&ithint=folder%2c.log
    I 've asked the question on answers.microsoft.com, here is the answer I got :
    "These are the errors in the log
    0x800705B4  --  Error_Timeout
    Temporary connection-related errors may occur when you use Windows Update or Microsoft Update
    http://support.microsoft.com/kb/836941
    You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
    http://support.microsoft.com/kb/883825
    You receive a "0x80246002" error code when you use the Windows Update or Microsoft Update Web sites to install updates
    http://support.microsoft.com/kb/958056
    When you try to install updates from the Windows Update Web site or from the Microsoft Update Web site, you may receive a "0x80246007" error code
    http://support.microsoft.com/kb/958042
    And this is where I believe the issue lies
    Processing component-Windows-ETW-Core
    Display ID of this manifest is (NULL)
    manifest does not have any migration information
    Without this, you will not be able to upgrade to Windows 8.1
    My suggestion:  Repost to TechNet Forum.  These are IT techs that will be better able to assist you.
    http://technet.microsoft.com/en-us/windows/hh771457 "
    I asked the same question in social.technet.microsoft.com in Frenche here :
    http://social.technet.microsoft.com/Forums/windows/fr-FR/11d25f90-0fcc-4ccb-b6be-5e9612bfeb0b/problme-dinstallation-de-windows-81-erreur-0xc19001010x20017?forum=windows8fr
    I tried the solution proposed :
    1. DISM.exe /Online /Cleanup-image /RestoreHealth
    http://technet.microsoft.com/fr-fr/library/hh824869.aspx
    2. Run -> wsreset.exe ->
    3. Clean boot
    But the installation still fail with same error code.
    That's why I turn to you .
    Hope you find the solution.
    Cordially.
    Dominique GAUTHIER

    Hi,
    According to the setuperr.log, In fact, the error message should locate the location as below:
    2014-01-14 11:40:26, Error      [0x0808fe] MIG    Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
    gle=126
    Please check the location and its logs. In addition, as your computer is too old, may be the hardware is the problem that caused installing Windows 8.1 failed.
    Roger Lu
    TechNet Community Support

  • Install Error Windows 2008 R2

    The installation of FMS 3.5.1 r516 Development fatally failed on our Windows 2008 R2 Server. We tried an R1 server and that one installed with no issues.
    It gets past the MS C++ installer, then shortly after:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    FMSMaster.exe
      Application Version:    3.5.1.516
      Application Timestamp:    498a2199
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7600.16385
      Fault Module Timestamp:    4a5be02a
      Exception Code:    80000003
      Exception Offset:    00014159
      OS Version:    6.1.7600.2.0.0.272.7
      Locale ID:    1033
      Additional Information 1:    4c0d
      Additional Information 2:    4c0d4d78887f76d971d5d00f1f20a433
      Additional Information 3:    4c0d
      Additional Information 4:    4c0d4d78887f76d971d5d00f1f20a433
    We'd like to put this in production on all of our R2 servers... but certainly we can't at this point.
    Mike Wilcox

    Hi,
    FMS 3.5.1 supports Windows 2008 R2.
    Regarding the error message that you get it can also be caused due to some files getting corrupt in Windows registry.
    The corruption in registry can occur due to several reasons such as existense of invalid entries caused due to software you are no longer using, or an improper software installation or removal.
    You can try the installation on another machine with a fresh installation of Windows 2008 or re-install the OS if possible. You can also try some registry repair tool in case you don't wish to re-install the OS.
    Look into windows 2008 support forums for more information on this error message.
    Thanks,
    Abhishek

  • Flash Player " Error. Common install error " Windows 7

    Prior to reinstall windows stood Google Chrome and Flash Player worked . After reinstalling, Google Chrome is not installed. Install Mozilla Firefox, but I can not install Flash Player. (Error: common installation error)

    Hi,
    According to the log file, the installer file is missing some required components.  Pease provide the following to help us identify the root cause:
    Where did you download the Flash Player installer from? What's the file name of the downloaded file?
    What files are inside C:\Windows\System32\Macromed\FlashYou can take a screenshot of the directory contents and post it (How to post a screenshot in the forum))
    After obtaining the above information, please do the following:
    Delete any installer file you have downloaded
    Download the uninstaller from http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    Download the offline installer posted at the bottom of the Installation problems | Flash Player | Windows page, in the 'Still having problems' section (you'll want to download the installer for Firefox).
    Run the uninstaller downloaded in step 2
    Reboot your machine
    Run the installer downloaded in step 3
    Launch Firefox and go to https://helpx.adobe.com/flash-player.html.  Click on the 'Check Now' button.  The results should indicate that 17.0.0.134 is installed.
    If you get an error during any of these steps, please take a screenshot and post the screenshot, indicating at which step the error was returned.
    Maria

  • Intel HD 4400 install error Windows 10

    Hello all, I have updated to Windows 10 just a few hours ago and I noticed that I the text in general is a bit fuzzy which got me thinking if something is wrong. I tried opening Intel HD graphics control panel from the icon on the taskbar but it's greyed out. I went online to http://support.hp.com/us-en/drivers/selfservice/HP-Spectre-13-3000-Ultrabook/5401166/model/6709285#Z7_3054ICK0KGTE30AQO5O3KA30R1 to download the latest Intel Graphic drivers for Windows 10 but I receive an error when trying to install it: " This computer does not meet the minimum requirements for installing the software." Tried uninstalling the drivers from Device Manager and then reinstall. Did not solve it. I'm stuck.Any ideas? Please help. Thanks.

    Facing the same issue
    HP Envy m7psychoticapex wrote:
    Hello all, I have updated to Windows 10 just a few hours ago and I noticed that I the text in general is a bit fuzzy which got me thinking if something is wrong. I tried opening Intel HD graphics control panel from the icon on the taskbar but it's greyed out. I went online to http://support.hp.com/us-en/drivers/selfservice/HP-Spectre-13-3000-Ultrabook/5401166/model/6709285#Z7_3054ICK0KGTE30AQO5O3KA30R1 to download the latest Intel Graphic drivers for Windows 10 but I receive an error when trying to install it: " This computer does not meet the minimum requirements for installing the software." Tried uninstalling the drivers from Device Manager and then reinstall. Did not solve it. I'm stuck.Any ideas? Please help. Thanks. 

  • Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

    I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

    There are so many different error and problems peopl are having.
    This is a link to mine
    https://discussions.apple.com/thread/3467825
    I think it has to be something on Apples end.
    Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
    hope this settles you a bit

  • Windows 7 64bit Install error microsoft.vc80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b3 b9a1e8e3b",processorArchitecture="amd64"

    How do i fix this install error.  Very fustrating. 

    Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.

  • Install error #1620 PrPro Windows Vista Home Premium

    Install error 1620  when attempting to install CS4 "This installation package could not be opened"  (for each component of the software package).   Windows Vista Home Premium 32 bit, Intel i7 processor.   Unable to install any components of PrPro.  This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

    I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
    Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
    CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
    Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
    Also read the article below... I have NOT done this, but it seems to be an easy process
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

  • HP C309 G AIO can't install in Windows 7 64bit  running under BootCamp

    HP C309 G Printer wont install in Windows 7 64bit running under BootCamp on a new iMac
    Just bought a new iMac. Installed HP C309 all in one without incident on the Mac side. I am also running Windows 7 on iMac through a program called Bootcamp. When I boot to Windows 7 and try to install the newly downloaded software for windows 7 from the HP site, it begins to load then stops, giving me two error messages. They are both essentially the same except one says software and the other says hardware. The software one says: This computer does not have the necessary USB software support to allow completion of a USB installation. The printer plugs directly into the monitor in one of four usb ports. All the usb ports work on the system when using Windows 7. I have other devices working and plugged into the usb ports while in Windows 7. It is almost like the printer software is unable to find the usb software or hardware. Any ideas

    Well, you have a full Window's 7 install so you would really have to go to HP and/or Microsoft to see what is going on. Bootcamp basically is only involved with "booting" and just installs Apple product drivers and such. Just treat the Window's side as if you are using it on a "normal" Window's PC. (As far as problems, crash's, updates, or any other Windows, HP, etc, problems you may have.)
    "Installed HP C309 all in one without incident on the Mac side."
    So,,, that means the printer "works" (prints) on the Mac or the installer just worked? Make sure the Printer actually prints in the Mac side as you may have a dead USB port on the Printer. It happens.
    If your HP works fine (prints) in the Apple environment you know it's not the USB ports on either the printer or the computer.
    You said you already downloaded the newer versions, have you tried using the drivers on the install disk and then update them to the newer ones? Also if you haven't yet, make sure the drivers are for the 64bit version, just a thought.
    That's about all my brain cells have so good luck.......

  • Can't install Photoshop CS6 64bit on Window 8

    i can't install photoshop cs6 64bit on window 8
    Below is my computer spec
    THIS IS MY ERROR
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW066 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s), 44 warning(s)
    WARNING: DW066: OS requirements not met for {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0
    WARNING: DW066: OS requirements not met for {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0
    WARNING: DW066: OS requirements not met for {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1
    WARNING: DW066: OS requirements not met for {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0
    WARNING: DW066: OS requirements not met for {354D20E6-A25F-4728-9DA6-C9003D8F2928} Adobe Player for Embedding 3.3 3.3.0.0
    WARNING: DW066: OS requirements not met for {B8ADDCBD-30D9-4366-AE25-089CEF76C8E1} Suite Shared Configuration CS6 3.0.0.0
    WARNING: DW066: OS requirements not met for {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0
    WARNING: DW066: OS requirements not met for {9254D539-549A-41DD-A7DA-251766F2B76F} Adobe Player for Embedding x64 3.3 3.3.0.0
    WARNING: DW066: OS requirements not met for {99290358-A784-4218-A7BA-954AE5F9207C} AdobeCMaps x64 CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {9AB0EFC0-AC6B-11E0-9E61-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x86) 6.0.2900.2180
    WARNING: DW066: OS requirements not met for {9C4AA28F-AC6B-11E0-8997-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.4148
    WARNING: DW066: OS requirements not met for {093DEFC4-542D-4D0A-8162-0592055515F4} Adobe XMP Panels 4.0.0.0
    WARNING: DW066: OS requirements not met for {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148
    WARNING: DW066: OS requirements not met for {CFC3110A-491C-4DBF-A97D-66C567600A2F} Photoshop Camera Raw 7 7.0.0.0
    WARNING: DW066: OS requirements not met for {246C4B99-19F7-4475-9787-5FF8595B86D7} AdobePDFL x64 CS6 10.9.0.0
    WARNING: DW066: OS requirements not met for {B2D792AF-F407-4EFA-9A03-3F2A476146F6} AdobeTypeSupport x64 CS6 11.0.0.0
    WARNING: DW066: OS requirements not met for {9D2A060F-AC6B-11E0-8C00-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x64) 10.0.40219.1
    WARNING: DW066: OS requirements not met for {55F0AFED-606D-476A-A07A-134291002FBA} Photoshop Camera Raw 7 (64 bit) 7.0.0.0
    WARNING: DW066: OS requirements not met for {1F955A4A-F365-4379-AEE2-B7C83E1AA883} Adobe Photoshop CS6 Support 13.0.0.0
    WARNING: DW066: OS requirements not met for {EB2A8CD4-B247-4810-A294-E3DB8EDC6060} Adobe CSXS Extensions CS6 3.0.0.0
    WARNING: DW066: OS requirements not met for {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {51C77DC1-5C75-4491-8645-A17CC33F5A36} AdobeColorEU CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {26F763C9-076F-473D-9A0E-4050C973737C} AdobeColorJA CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {BB66788C-4C4F-4EB0-B146-9178857DE287} AdobeColorNA CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0
    WARNING: DW066: OS requirements not met for {7E91BB17-16A1-42CE-9502-D6C98BE04920} PDF Settings CS6 11.0.0.0
    WARNING: DW066: OS requirements not met for {0377892E-FCAC-46EC-AA70-C6AC8A86A81F} Dynamic Link Media Server 1.0.0.0
    WARNING: DW066: OS requirements not met for {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0
    WARNING: DW066: OS requirements not met for {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0
    WARNING: DW066: OS requirements not met for {B98E0DCB-1A75-4394-9813-3A114AA3891D} Adobe Mini Bridge CS6 2.0.0.0
    WARNING: DW066: OS requirements not met for {EFBC1075-F890-4293-A0D1-04BE66EE2AB3} Adobe ExtendScript Toolkit CS6 3.8.0.0
    WARNING: DW066: OS requirements not met for {83463106-DD1C-4FE5-A61C-DF6715472AD4} Adobe Extension Manager CS6 6.0.0.0
    WARNING: DW066: OS requirements not met for {29DB26AB-81CE-41D6-B0C9-BE15E36C87C6} Adobe Hunspell Linguistics Plugin CS6 x64 1.0.0.0
    WARNING: DW066: OS requirements not met for {7CA3FAD4-7B82-473C-8207-5A283E90742A} Adobe WinSoft Linguistics Plugin CS6 x64 1.3.0.0
    WARNING: DW066: OS requirements not met for {99FE4191-AC6B-11E0-B602-00215AEA26C9} Microsoft Visual C++ 2005 Redistributable Package (x64) 6.0.2900.2180
    WARNING: DW066: OS requirements not met for {8085C16A-3148-40B4-BC8B-12ED59C9C478} Recommended Common Fonts Installation x64 2.0.0.0
    WARNING: DW066: OS requirements not met for {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0
    WARNING: DW066: OS requirements not met for {C41A769E-27ED-44F7-8A11-F2E32F538E05} Adobe Linguistics CS6 x64 6.0.0.0
    WARNING: DW066: OS requirements not met for {00496505-D56B-4B07-A8C5-70A0B4E689F7} Adobe Bridge CS6 (64 Bit) 5.0.0.0
    WARNING: DW066: OS requirements not met for {74EB3499-8B95-4B5C-96EB-7B342F3FD0C6} Adobe Photoshop CS6 Driver 13.0.0.0
    WARNING: DW066: OS requirements not met for {3289C0E8-78B9-47D4-98E5-F25BFF1CBED4} Adobe Photoshop CS6 Core_x64 13.0.0.0
    WARNING: DW066: OS requirements not met for {29A80A19-9E35-455A-AF9D-B39AE5B3035D} Adobe Photoshop CS6 English Language Pack_x64_AdobePhotoshop13-en_US_x64 13.0.0.0
    ----------- Payload: {9B78FAB0-AC6B-11E0-8EF3-00215AEA26C9} Microsoft Visual C++ 2008 Redistributable Package (x64) 9.0.30729.4148 -----------
    ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\PRINCE\Desktop\Adobe Photoshop CS6\Adobe CS6\payloads\Microsoft VC 2008 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x64) from Microsoft website - www.microsoft.com
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Microsoft Visual C++ 2008 Redistributable Package (x64): Install failed
    Anyone can help me please.........

    i can't install Microsoft Visual C++ 2008 Redistributable Package (x64)

  • Install Oracle Clusterware/RAC  Windows x32bit or Windows 64bit ?

    Hi,
    What is your suggestion to install Oracle Clusterware RAC on Windows.
    Why choose Windows 32 bit ?
    Why choose Windows 64 bit?
    What are the advantages and disadvantages?

    Hi,
    I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
    In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
    32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
    You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
    The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
    The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
    If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
      TNS-00510: Internal limit restriction exceeded
        32-bit Windows Error: 8: Exec format error
    TNS-00507: Connection closed
        32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
    Another point:
    With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
    Check this note..
    *ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
    Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
    I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
    Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
    There are lot services involved  wich require memory and a big limitation of memory on 32-bit.
    At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
    Benefits of Use 64-bit are:
    64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
    64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
    No performance penalties for large memory
    Unlimited user connectivity
    64-bit Windows versions allow addressing of large physical memory sizes without using PAE
    *Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
    This document gives a better understanding of my perspective.
    http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
    Regards,
    Levi Pereira

  • The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.

    Last night, some of our systems installed updates released on 11/13/2014.  
    KB3021674
    KB2901983
    KB3023266
    KB3014029
    KB3022777
    KB3020388
    KB890830
    Today, all of the servers running Windows Server 2008 R2 started logging the following error in the Security log over and over:
    Log Name:      Security
    Source:        Microsoft-Windows-Eventlog
    Date:          1/15/2015 11:12:39 AM
    Event ID:      1108
    Task Category: Event processing
    Level:         Error
    Keywords:      Audit Success
    User:          N/A
    Description:
    The event logging service encountered an error while processing an incoming event published from Microsoft-Windows-Security-Auditing.
    Servers running Windows Server 2008 that also installed the updates are not experiencing the problem.  It looks like one of the updates may have introduced this problem with Server 2008 R2.

    ...Did you for sure confirm that:
    https://technet.microsoft.com/library/security/MS15-001
    is the cause?
    I did.  I had a VM that was not experiencing the problem.  I took a snapshot and tested the patches one by one.  Installing only KB3023266 immediately caused the issue to occur (after reboot).  A similar process was used to confirm that
    installing KB2675611 resolved the problem.
    Note that I found the installation of KB2675611 is usually quick, but it took several hours hours to install on some of our systems.  We had installed this patch a few months ago on a couple of servers and it was always quick to install.  But,
    it seems like installing it on a symptomatic system can cause it to take a long time.

  • Problem installing itunes on windows 64bit

    problem installing itunes on windows 64bit, help me!!!

    Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

  • Portege M750 - PCI controller software not installed on Windows 7 64bit

    Hi, had an upgraded SSD for my machine so decided to do a fresh install of Windows 7 64bit and now I have and error saying PCI controller software is not installed, tried windows update no luck - any ideas please?
    Thanks, Peter

    OK cool advice - thanks it is from Intel and is
    0x2A44 Chip Number: Mobile 4 Series Chipset
    Chip Description: Intel Management Engine Interface
    Notes: ftp://ftp.vaio-link.com/PUB/VAIO/ORIGINAL/ME DRIVER INTEL 4.0A _ 4.0.0.1105.ZIP
    Downloaded, installed and working - thanks for the quick advice!
    Peter

Maybe you are looking for

  • X121e and Windows XP: only PIO mode (not DMA)

    I installed Windows XP on a thinkpad X121e. After actualizing all drivers from Lenovo I found out why the whole system was very slow: The internal hard disk is running only in PIO mode and reaches only 3 MB/s which is far to slow to work. I did not h

  • No startup sound, no sound throughout, no audio devices recognized.

    Hello! My home imac is 1+yr old and it has had sound problems intermittently for about the last 6-8 months. The sound will work perfectly fine, then -without changing a setting or anything- the sound is gone. Also, I do have external speakers attache

  • Can lightroom 3 complete 1:1 previews when unreadable files are detected

    when lightroom 2.6 detects an unreadable file, be it a .mov or a corrupt file, it stops the process of creating 1:1 previews until I answer the dialogue box that pops up after the import and before the previews are built. Can it please allow the proc

  • What is an "active connection" to the FMS server?

    Hi, I am wondering exactly what are considered "active connections" to an FMS server? Is it only the RTMP/RTMFP NetConnections, or do NetStreams also count? Thanks

  • Inaccessible statement error in upgrade

    A function module has a clear statement in the top include and works fine in 46c. It is now reporting as error "Statement inaccessible" in Ecc6. Has anyone faced a similar issue? What is the fix? Andrew