Bi Publisher is giving an error...
Hi All,
I am installing BI Publisher in linux Redhat 5.5.
And i am getting error of falling precheck. It shows me glibc-2.3.2-95.3 package is missing, but when i check with rpm -qa command i have installed higher version of glibc.
then why it giving me this error?
And even i ignore this precheck and continue installation then its giving Java lang linking error.
What should i do? can any one help me to get solve this...
I got this error when i will continue installation without satisfying precheck :
-----------log file is -------------------
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1AS, redhat-3, redhat-4, redhat-5, suse-9, suse-10, SuSE-9 or SuSE-10
Passed
Checking for Kernel version 2.4.21 Passed
Checking for glibc version glibc-2.3.2-95.3 Failed <<<<
Checking swap space: must be greater than 150 MB. Actual 1613MB Passed
Checking Temp space: must be greater than 150 MB. Actual 924 MB Passed
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-05-08_09-30-15AM. Please wait ...[oracle@s1 Oracle_Business_Intelligence_Publisher_Standalone]$ Oracle Universal Installer, Version 10.1.0.6.0 Production
Copyright (C) 1999, 2007, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-05-08_09-30-15AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-05-08_09-30-15AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:174)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:183)
at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:279)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:739)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:653)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:174)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:183)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:112)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:797)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:653)
Thanks,
Viren
Edited by: Viren Patel on 08-May-2012 06:14
If you lost the security configuration of BIP, you can enable the superuser features to access to the admin tab. The complete description is here. Check the paragraph Access to the Admin Tab :
http://gerardnico.com/wiki/dat/bip/configuration_bip
Success
Nico
Similar Messages
-
Adobe Air iOS publishing keeps giving unexpected errors
The device has encountered and unexpected error.
Installation Error: PackageExtractionFailed
I thought it would maybe be because of my certificates or profiles. So I made new development certificates and distribution certificates. I extracted them to .p12. I put in it flash and typed with the password.
Then I added the provisioning profile with the wildcard App ID typed in. I put my iOS development type on testing. And published it for my iPhone. I also put my app picture on the Icons tab.
I keep getting this same error even though I double checked I filled in everything correctly.
Please help. Thanks.Hi SomeDude,
This error appears if the iOS device is not registered with Apple developer , please register your device by giving UDID of the device and try publishing with the same certificate and provisioning profile you have, or you can try with new provisioning profile .
Thanks!
Latha -
BI Publisher report giving FX ERROR on server
Hi,
I am getting FX error on server when i am modifying the RTF file and add a new xml field to it.
A blank RTF works fine, but the moment i add any filed in the RTF from xml, it goes in error. On my local machine the RTF file is working absolutely fine and it produces a proper PDF.
Please help if anyone has faced this issue?
Thanks.Hi Lalatendu,
What is the error message it is giving you ? Also is it referring any formula name in your error message ?
Can you past the screen capture to understand better.
Thanks,
Sastry -
I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize
i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.
The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.
-
hi,
i HAD MADE A REPORET IN which i havce to display the bolck stock ,it is giving runtime error as i had added 1 more table,plzz help me out as it is really urgent to me. here is d code:-
*& Report ZDEMO_SMARTFORM_COPY
REPORT ZDEMO_SMARTFORM_COPY.
TABLES: MCHB,MARA,T001W.
DATA: BEGIN OF ITAB OCCURS 0,
ITEMID LIKE MARD-MATNR,
SPEME LIKE MARD-SPEME,
WERKS LIKE MARD-SPEME,
LGORT LIKE MARD-LGORT,
NTGEW LIKE MARA-NTGEW,
MEINS LIKE MARA-MEINS,
GEWEI LIKE MARA-GEWEI,
CHARG LIKE MCHB-CHARG,
WTKG LIKE MARA-NTGEW,
STOCK TYPE P LENGTH 10 DECIMALS 3,
DESC LIKE MAKT-MAKTX,
TOTWT LIKE MARD-SPEME,
WT TYPE P LENGTH 12 DECIMALS 3,
END OF ITAB.
ITEMID LIKE MCHB-MATNR,
CSPEM LIKE MCHB-CSPEM,
CHARG LIKE MCHB-CHARG,
WERKS LIKE MCHB-WERKS,
*PARAMETERS : PLANT LIKE MCHB-WERKS OBLIGATORY.
PARAMETERS : PLANT LIKE MARD-WERKS OBLIGATORY.
DATA : DESC LIKE MAKT-MAKTX.
SELECT AMATNR ASPEME AWERKS ALGORT BNTGEW BMEINS BGEWEI CCHARG FROM MARD AS A
INNER JOIN MARA AS B ON BMATNR = AMATNR
INNER JOIN MCHB AS C ON CMATNR = AMATNR
INTO TABLE ITAB WHERE AWERKS = PLANT AND ASPEME > 0.
SELECT AMATNR ACSPEM ACHARG AWERKS BNTGEW BMEINS B~GEWEI FROM MCHB AS A
INNER JOIN MARA AS B ON BMATNR = AMATNR
INTO TABLE ITAB WHERE AWERKS = PLANT AND ACSPEM > 0.
WRITE: / 'ITEMID DESCRIPTION STOCK.QTY BATCH NO. NETWT TOTAL.WEIGHT '.
ULINE.
LOOP AT ITAB.
IF ITAB-NTGEW <> 0 .
CALL FUNCTION 'ZGET_ITEM_WEIGHT'
EXPORTING
P_BUID = ITAB-WERKS
P_ITEMID = ITAB-ITEMID
P_QTY = ITAB-NTGEW
P_UOM = ITAB-GEWEI
P_UOM1 = 'KG'
IMPORTING
P_RETVAL = ITAB-WTKG.
ENDIF.
CONVERTING ITEM QTY IN KG
ITAB-WT = ITAB-STOCK.
IF ITAB-MEINS = 'G'.
ITAB-WT = ITAB-STOCK / 1000000.
ELSEIF ITAB-MEINS = 'KG'.
ITAB-WT = ITAB-STOCK / 1000.
ELSEIF ITAB-MEINS = 'TO'.
ITAB-WT = ITAB-STOCK * ITAB-WTKG / 1000.
ENDIF.
ITAB-TOTWT = ITAB-WTKG * ITAB-CSPEM.
ITAB-TOTWT = ITAB-WTKG * ITAB-SPEME.
SELECT SINGLE MAKTX FROM MAKT INTO DESC WHERE MATNR = ITAB-ITEMID.
WRITE:/ ITAB-ITEMID,15 DESC,50 ITAB-SPEME,ITAB-CHARG,ITAB-WTKG,ITAB-TOTWT.
MODIFY ITAB.
ENDLOOP.HI,
i had tried to ftech data from mard and it isgiving runtime error. dis is the code:-
TABLES: MCHB,MARA,MARD.
DATA: BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARD-MATNR,
SPEME LIKE MARD-SPEME,
WERKS LIKE MARD-SPEME,
LGORT LIKE MARD-LGORT,
END OF ITAB.
SELECT MATNR SPEME WERKS LGORT FROM MARD INTO CORRESPONDING FIELDS OF TABLE ITAB.
LOOP AT ITAB.
WRITE:/ ITAB-MATNR,ITAB-SPEME,ITAB-WERKS,ITAB-LGORT.
ENDLOOP. -
Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:? -
i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097 -
I am unable to backup my iphone 5 iOS 6.0.1 (connected directly to laptop USB) with my itunes 11 for Win 7 64bits. The process starts and fails to complete giving the error: itunes could not complete backup of iphone because iphone disconnected.
I have restarted the PC, the iphone, changed the lightining cable and nothign resolves it: backup never completes.Hi, I disabled the antivirus and the firewall. Same result
I even deleted the backup folder inside C:\Users\...\Apple Computer\MobileSync\Backup to eliminate any corruption in the old backup files.
Nothing changed: Session either times out or i get the same error message: itunes could not back up iphone because iphone disconnected. It always happens during step 3 out of 4 which is "transfering purchased apps from iphone to PC" and comes after step 2 which is backup.
My iphone 5 is not jailbroken, and is a factory unlocked phone.
Any other suggestion?
Pls help -
Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
i cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194, i cant update ,y ipod touch 4 , i tried everything but it keep giving me error 3194
Did you try the actions specified here:
- iTunes: Specific update-and-restore error messages and advanced troubleshooting
- 3194-How do I reset the hosts file back to the default?
- http://support.apple.com/kb/ts1275
Saying "i tried everything " provides us with no information as to what you arelady tried? -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I could not transfer photos from iphone to macbook through iphoto. It is giving an error " could not be imported, file is in unrecognized format"
Did you look in iTunes?
-
My canon MP240 is giving me error code 5200, what do i do?
my canon MP240 is giving me error code 5200, what do i do? there was a paper jam but i took care of it and im still getting the message. do i need a new printer?
Hi bonzaiburger,
If one or more if the ink cartridges in your printer are not low or out of ink, and resetting the printer does not resolve the error, the printer will require servicing to resolve the issue. Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Use Of "#EC CI_EXECSQL in ABAP with EXEC SQL. Statement giving Syntax Error
Dear Gurus,
I have encountered an issue while trying to remove warning for using Native SQL statement using pseudo comment "#EC CI_EXECSQL
The thing is like this -- i have used follwing native sql command in abap.
EXEC SQL.
CONNECT TO 'SURROUND_DB'
ENDEXEC.
Now when i am checking this code in code inspector it is showing a warning with information below
CA CL_CI_TEST_CRITICAL_STATEMENTS0006
Code Inspector
Critical Statements
Use of Native SQL
Authorization checks cannot be appropriately run using EXEC SQL and should be carried out at program level.
The message can be hidden using the pseudo-comment "#EC CI_EXECSQL
Use of exceptin handling section for that warning showing me to use :
The message can be hidden using pseudo
comment "#EC CI_EXECSQL
Now when I am using "#EC CI_EXECSQL in the abap like below :
EXEC SQL. "#EC CI_EXECSQL
CONNECT TO 'SURROUND_DB'
ENDEXEC.
It is giving syntax error
The text literal ""#EC CI_EXECSQL " is longer than 255
characters.Check whether it ends correctly.
Please provide the guideline to resolve this issue.
Thanks & regards
Saifur Rahaman.Hi Saifur,
You can remove the warning using the following syntax:
EXEC "#EC CI_EXECSQL
SQL.
CONNECT TO 'SURROUND_DB'
ENDEXEC.
At least, it worked fine for me when using OPEN CURSOR, SELECT, FETCH and so on statements.
The way to use the pseudo comment is not very intuitive, but at least for my examples worked fine.
I hope this may help you.
Best regards,
Edgardo G. König
Maybe you are looking for
-
Excel Services Web App Refresh failure
I started having an issue where manual refreshes of my Excel Workbooks are failing after installing SP1 in my Office Web Apps 2013 farm. The workbooks are configured to use a target application ID from the secure store service and they refresh fine
-
BI 7.01 BEx report/workbok Time_Out Errors
Hi, Our BEx reports/workbooks are failing with time_out error's. Below are the time_out error details: BEx workbooks are executed through VB Script. Some days they run fine and some days they time_out. The program "CL_RSDRH_HIER_CACHE===========CP" h
-
Open camera and capture image using J2me.
please I want J2me code to open the mobile camera and capture image.... please reply me as quick as possible....(very urgent)...
-
Hello, I'm very new to SQL concepts, I have recently installed a backend database for SCCM application with below configuration. Installed the SQL on VM with 10GB RAM, 50GB(OS Partition), 400GB (SCCM DATA & SQL DATA) and 50GB (SQL Logs) OS:
-
Routing and remote access logging to SQL server
Hi! I am in the process of trying to set up SQL logging from routing and remote access on a windows server 2003 to another windows server 2003 which is running microsoft SQL server 2005. What i did was i created a database named RRAS in the sql serve