BI relevant Data Copy (R/3 Productive -- R/3 Development)

Hello,
I am loading data from R/3 --> BI 7.0
I have only 2 systems namely, Development System and Productive System.
I would like to have a copy of the recent data available on my R/3 Productive System on my R/3 Development System. This I wish to do without a "system copy", because of its complexity.
Is there a way to copy all the BI relevant tables/views/data etc from my R/3 Productive System to my R/3 Development System? How do I find these tables/views/data etc?
Pls Help. Points will be given.
Thanks.
SD

Hi,
Pls chk this document , might be useful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
BW system Copy :
System Copy BW
Re: bw system copy
BDLS :
Re: After R/3 Refresh
BDLS on BW Q/A
client copy
http://help.sap.com/saphelp_nw04/helpdata/en/c2/17e73a86e99c77e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24cc34ba111d189750000e8322d00/frameset.htm
Client Copy
http://help.sap.com/saphelp_nw04/helpdata/en/ff/9be1817d811c41985662da25061f98/frameset.htm
Hope this helps,
Regards
CSM Reddy

Similar Messages

Write a procedure to find out the data copy is happening or not.

Good Day all,
I have two databases called "*Report*" and "*Production*". I have a report database which copy a data from production database. I want to write a Stored procedure to compare the count of one table in both the databases. All the tables are same in both the databases.
Please note :*
1. We are writing the procedure to find out the data copy is happening or not and also report database is down or not.
2. Not all times, the both the count is same, sometimes it take delay to copy the data in report database but report database is not down.
Please see the query to compare
_"Report"_
Select count(*) from trx where date ='03-Oct-2010'
*"Production"*
Select count(*) from trx where date ='03-Oct-2010'
I am suggesting to take a count for every 5 mins and keep in temp table and compare it.
Thanks
Nihar

How are you replicating the data from the production database to the reporting database?
Wouldn't it make more sense to monitor that replication process rather than counting every row in the table every 5 minutes? That's going to get rather expensive for non-trivial tables. If you are using something like Streams to replicate the data, it would make far more sense to monitor the Streams apply process, to determine when the reporting database it updated as of, than it would to monitor the underlying tables.
Justin

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Data migration of open production order

Hello SAP gurus,
Please advise me about the steps that should be followed for data migration of open production order from legacy to SAP.
Regards,
Anand

Hello SAP gurus,
Please advise me about the steps that should be followed for data migration of open production order from legacy to SAP.
Regards,
Anand

Issue while uploading data from R/3 production to BW production

Hi,
We are facing an issue as follows.
We are trying to transfer master data from R/3 Production server to BW Production server.
For the first time when we transfer data, upload is happening properly. But for the second upload - we dont get any error where as in the monitor data transfer shows 0 from 0 records and the status never changes.
But if we restart the BW production server and then upload data, it works fine for the first upload but the same issue from second upload.
Any suggestions please?
Regards,
Ram.

Hi,
Roberto - In ST22, there is no short dumps related to this issue. The issue is not specific for a single object. For eg. If i upload 0MATERIAL (after restarting the server) it works. Now I try to upload 0DIVISION (any object) it doesnot get uploaded.
Sriram - We are trying Full Upload.
Hari - I can see the records in RSA3 of the source system. The records are available and also they are extracted properly.
Shreya - Basis people are also involved and trying to find out a solution.
Manfred - Actually data is available. But the data doesnot get uploaded. So i guess changing the traffic lights settings might not help.
Regards,
Ram.

How to get material's last posting date of issuing to production order?

Hi,
In my scenario, I need to get material's last posting date of issuing to production order (e.g. mov. typ. 261).
I tried to select the material documents whose movement type is 261, and restrict the posting date from month to month each time, until the first material document is selected.
But this method seems quite inefficient.
What kind of algorithm is more effient to do this?
Thanks
Wesley

Hi,
select max( budat )
from mkpf
into gv_budat
where mblnr in ( select mblnr
                     from aufm
                    where aufnr = gv_aufnr "(Prod. Order)
                        and matnr = gv_matnr "(Issued Material)
                        and bwart = '261' ).
Edited by: Azeem Ahmed Matte on Mar 12, 2010 12:33 PM

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

Most common BW data load errors in production and how to solve them ..

Hi All,
Most common BW data load errors in production and how to solve them ..
Any doc on it ,if so plz send it across to this id [email protected]
Thanks in advance.
Rgrds
shoba

hi
1) RFC connection lost.
2) Invalid characters while loading.
3) ALEREMOTE user is locked.
4) Lower case letters not allowed.
5) While loading the data i am getting messeage that 'Record
the field mentioned in the errror message is not mapped to any infoboject in the transfer rule.
6) object locked.
7) "Non-updated Idocs found in Source System".
8) While loading master data, one of the datapackage has a red light error message:
Master data/text of characteristic 'so and so' already deleted .
9) extraction job aborted in r3
10) request couldnt be activated because theres another request in the psa with a smaller sid
11) repeat of last delta not possible
12) datasource not replicated
13) datasource/transfer structure not active ´
14) Idoc Or Trfc Error
15. ODS Activation Error

Data copy B/W Essbase Applications using script

How to Data copy from one app to another app.
Server Name: Server1
Version: 9.3
Essbase App: App1
Data Bases: Db1, Db2,Db3
Server Name: Server1
Version: 9.3
Essbase App: App2
Data Bases: Db1, Db2,Db3
Note: App1 & App2 Applications are having similar outlines
Requirement: Copy Year 2012 Data from App1 to App2
I have come to know this is possible using Xref calc script.
Could some one please suggest the script.
Thanks in advance!

Partitioning should be the best one as Glenn said, but see if you have licenses for that, as partitioning is licensed separately from essbase.
The alternatives could be:
* Data Export / Import: for exporting you could use DATAEXPORT command within a calcscript (see technical reference for details). Then importing the data with a rule file.
* XREF: this approach could give some headaches with block creation (see https://cn.forums.oracle.com/forums/thread.jspa?threadID=1010153). In general terms, try this one if the portion of data to copy is relatively small and well delimited.
Nacho.-

Data pull failure in Production (Working fine in Development)

Hai,
   I have an UDConnect scenario where I am pulling data from an Oracle database. In development when I tried pulling data with a selection in infopackage for 0CALDAY infoobject with a date range, it is pulling the data. But if I try to do the same thing in production it fails with an error JOB IN SOURCE SYSTEM TERMINATED - REQUEST SET TO RED. Even if I try to do a full upload it fails with the same error. It doesn't work in RSA3 also in production. But all works fine in development
Kindly help as it is ver urgent.
Regards,
Neha Solanki

Hai,
It gives the short dump called CALL_FUNCTION_REMOTE_ERROR. What does it mean? Following is the dump in detail:
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSSDK" had to be terminated because one of the
    statements could not be executed.
This is probably due to an error in the ABAP program.
The error occurred in an RFC call to another system.
    The target system has also written a short dump.
    Consult this short dump for more precise information about
    the cause of the error.
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL
    It was logged under the name "RFC_EXTERNAL_ABORT"
    on the called page.
Regards,
Neha Solanki

Data copy in Hyperion Planning taking long time

Hi All,
good morning.
I am using data copy in hyperion planning (11 1 2 2) to copy from one scenario to other selecting account annotations and supporting details.
The essbase part of copying data completed (checked sessions), but when I checked the job console in planning it still says processing for past 2 hrs.
My java heap size for planning is 1.5GB and the backed database is SQL server
my suspicion is that the issue was with backend sql. but I don't where to start.
can anyone please guide me.

I am working with version 11.1.2.1 and running into the same issue. The Supporting detail option works fine if the application has just a few details, let’s say 50 cells, but if we have around 500 cell with details then the copy process never ends, the details are not copied, and I have to restart the Planning service. As a workaround we are using a two steps process. In the first step we copy the just Essbase using the copy data functionality of Planning (with no data copy options enabled) or by using an Essbase calculation script. For the Supporting Details piece we use the Export for Edit functionality of LCM and export them to an XML file, and then we edit the XML file and change the source member name with the target member name, and finally we use the Import after Edit functionality of LCM. Of course if works only if the Planning application was deployed using EPMA.

How can read BOM component date before save the production order??

Hi Experts,
In our company, we need to develop a program to read the BOM component data of the production order
before we save the production order.
That for example ,when we create and release a production order , before we save the production
order,we want a porgram to read the BOM component data. If some component data can meet our
requriement (may be if there is material requirement quantity>100 EA),then the system will pop up a
small dialog box to remind us.
There is user exit PPCO0007 and PPCO0007.But it seems they only can read the head data of the
production order before we save the production order. And the BOM component data of the production
order are saved in the RESB(Reservation Table).So if we do not save the production order,all the BOM
component data are not saved in the RESB table.
So how can slove the problem??
How can read component date before save the production order??
Are there any other user exit we can use???

Hi Just wanted to check am I right that you are trying to check if you have enough Materials Available before you release or Save the order right ? if this is your business objective then when you create order you have material availability tab which checks and gives error if shortage is there. Please let me know if is this wht you asking for ?

Your current internet security settings do not allow data copying to clipboard

i get a message when i try to hit the Copy button at the end of the chat to try to copy the chat
your current internet security settings do not allow data copying to clipboard
how can i fix this

thanks for the reply but i was wondering how do i edit javascript then and all and i was wondering if any of the steps require a restart for firefox

System Copy of our Production Server using orabrcopy method.

Hi
We are planning to do a System Copy of our Production Server using orabrcopy method.
But as the Production Server Java Version is below 1.4.1, Orabrcopy could not be executed.
As per the planned downtime of the Production Server, we have copied all the database offline. ( say 9th of August)
but we could not create the control , trace, init<sid>.ora files using ORABRCOPY.. during offline database copy.
Now the system is up and running.. We havent created the files yet.
I have 2 questions..
1. Is there any other method so that we can create the control , trace, and init<sid>.ora files.
2. If we create the control trace files now ( 13th of August ) can we use the offline backup that we took on (9th of August) to perform a System Copy..
Need your addvice..
Thanks and Regards
Paguras

Basically, orabrcopy does (aside from other things) an
alter database backup controlfile to trace;
You can enter that manually (anytime) and use the resulting .trc file in saptrace directory as a base for control.sql, however, in this case you need to "know" what you're doing. ORABRCOPY is a "nice frontend" for this because it uses the same statement to create CONTROL.SQL, it just edits it appropriately which you will need to do manually.
Markus

Expected date for Jdeveloper 11g production version

i am planning to start development with jdeveloper (Forms 6i background). but with latest version.
If you can help me out of dates of jdeveloper 11g production release.
it will save my troubleshooting time.
Also help me out some starting point to be successful projects using jdeveloper.
In forms successful,
It is so simple.
1. create table.
2. use forms wizard (block and layout).
3. make layout change as per your need.
4. add buttons and validation.
5. done.
But in Jdeveloper.
What is the best practice. ??
thanks in advance.

Hi,
there will be a technology preview 3 out shortly to christmas. There exist no concrete release date of JDeveloper 11 production.
Start at otn.oracle.com/products/jdev and check some of the tutorials (OBE). Note that for you to learn building JSF web applications, I suggest to use the 10.1.3 tutorials and how-tos.
Frank

BI relevant Data Copy (R/3 Productive -- R/3 Development)

Similar Messages

Maybe you are looking for