BI REPORTING?? urgent plz

hi,
I need to give BI REPORTING Presentation with all the functions with examples on live. could you plz provide me the documentation on BI Reporting??
plz provide me the docs on Report Designer and WAD.
it will be grateful to all of you and i will assign points.
regards
vadlamudi

Hi,
For BEx Analyser Demo check the links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/907ac522-ef62-2910-c38c-ee0ac47fe2a9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/907ac522-ef62-2910-c38c-ee0ac47fe2a9
Link For Query designer :
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/4e3a1c430e324ee10000000a422035/frameset.htm
Assign points if helpful
Rgds,
Gaurav.

Similar Messages

How to install adapters in pi 7.0 ex(tibco adapter) its urgent plz help

hi friends
can any one help me how to insatlll the tibco adapter in pi 7.0 its urgent plz help
thanks in advance
bye
raja

Hi Raj,
Is your Sender System Tibco If so Use JMS Adapter to get the Data from tibco and Use IDOC Adapter to Post in R3. For this you no need to Install any Adapter in XI System.
Similar discussions ,
XI integration with Tibco
XI Integration with Tibco EMS (Using JMS Adapter)
Regards
Agasthuri Doss

How to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

how to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

Hi,
At Form level, write trigger for WHEN_KEY_DOWN, check for F10 and put action as NULL.
Regards,
Amol

How to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

how to restrict fuction keys ex:-F10 in forms 6i.urgent plz..

If F10 is the Save button, than just simply program key-commit as:
begin
null;
end;BTW: never say URGENT here on the forum. It is considered very impolite!

Urgent plz:Reports

1)Hi in my scenario I have to generate a report with Vendor ,Inbound iDoc Number ,iDoc Date ,iDoc Status: 51 or 68 ,PO Number ,Invoice Number,Invoice date ,Invoice Amount ,Error Message: For multiple errors on a single iDoc, multiple records should be shown.
2)The mandatory field is lifnr and date(the date specified is sydatum-60 is the from field and sydatum in the to field).Have fetched the idoc in the particular range of date
3)Using idoc_read_completely have found the status and control record.
4)now have to find the idocs of status 51 0r 68 and then have to proceded?I have completed till the 3rd step only.The segment in which the vendor is present is E1EDKA1 and field is partn which is LF.Please help me to code further its urgent?

Hai,
By joining the tables edidc and edids get all the idocs in to it_idoc by passing the idoc type, message type date range and status.
get the data from the table edid4 into table it_data for all entries in it_idoc.
loop at it_idoc.
read the the table it_data with key docnum = it_idoc-docnum
segnam = 'E1EDKA1'.
v_sdata = it_data-sdata.
check for your vendor in v_SDATA.
ENDLOOP.
Reward.

Pdf reports on webtoGo ? urgent plz

Hi ,
I developed a webtogo offline application and successfully generated the jasper pdf reports on local jdeveloper.Now i am publishing the same on olite server.
The pdf report first save in /report folder and then open on popup in a new window(works fine on local machine with jdev).
Now i have a doubt if the same works on server too?
Does my code works or not?
becoz i am getting some null pointer exception.The same code i have deployed which is working on local machine.
error log:
java.lang.NullPointerException
     at purchasing.pages._error._jspService(_error.java:54)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.lite.web.JupServlet.service(Unknown Source)
     at oracle.lite.web.JspRunner.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at oracle.lite.web.JupServlet.service(Unknown Source)
     at oracle.lite.web.MimeServletHandler.handle(Unknown Source)
     at oracle.lite.web.JupApplication.handle(Unknown Source)
     at oracle.lite.web.JupApplication.service(Unknown Source)
     at oracle.lite.web.JupHandler.handle(Unknown Source)
     at oracle.lite.web.HTTPServer.process(Unknown Source)
     at oracle.lite.web.HTTPServer.include(Unknown Source)
     at oracle.jsp.runtime.OraclePageContext.include(OraclePageContext.java:514)
     at purchasing.pages._main._jspService(_main.java:96)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.lite.web.JupServlet.service(Unknown Source)
     at oracle.lite.web.JspRunner.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at oracle.lite.web.JupServlet.service(Unknown Source)
     at oracle.lite.web.MimeServletHandler.handle(Unknown Source)
     at oracle.lite.web.JupApplication.handle(Unknown Source)
     at oracle.lite.web.JupApplication.service(Unknown Source)
     at oracle.lite.web.JupHandler.handle(Unknown Source)
     at oracle.lite.web.HTTPServer.process(Unknown Source)
     at oracle.lite.web.HTTPServer.forward(Unknown Source)
     at com.osi.sew.servlet.SEWControllerServlet.doDispach(SEWControllerServlet.java:89)
     at com.osi.sew.servlet.ReportServlet.doPost(ReportServlet.java:111)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at oracle.lite.web.JupServlet.service(Unknown Source)
     at oracle.lite.web.AppServletHandler.handle(Unknown Source)
     at oracle.lite.web.JupApplication.handle(Unknown Source)
     at oracle.lite.web.JupApplication.service(Unknown Source)
     at oracle.lite.web.JupHandler.handle(Unknown Source)
     at oracle.lite.web.HTTPServer.process(Unknown Source)
     at oracle.lite.web.HTTPServer.handleRequest(Unknown Source)
     at oracle.lite.web.JupServer.handle(Unknown Source)
     at oracle.lite.web.SocketListener.process(Unknown Source)
     at oracle.lite.web.ClientListener.process(Unknown Source)
     at oracle.lite.web.SocketListener$ReqHandler.run(Unknown Source)
Thanks

r.jsp ----------------- <%@ page contentType="text/html;charset=windows-1252"%> <% String path = com.osi.sew.utils.SEWConstants.SEW_KEYS.CONTEXT_PATH;%> <script type="text/javascript">
function populateDetails(){
var processKey = populateDetails.arguments[0];
var args = populateDetails.arguments[1];
var ajaxIndex = populateDetails.arguments[2];
if(processKey == 'advisedby'){
// <![CDATA[
function display(obj,id1,id2,id3) {
txt = obj.options[obj.selectedIndex].value;
document.getElementById(id1).style.display = 'none';
document.getElementById(id2).style.display = 'none';
document.getElementById(id3).style.display = 'none';
if ( txt.match(id1) ) {
document.getElementById(id1).style.display = 'block';
if ( txt.match(id2) ) {
document.getElementById(id2).style.display = 'block';
if ( txt.match(id3) ) {
document.getElementById(id3).style.display = 'block';
// ]]>
var url1='<%=(String)request.getAttribute("jasperPrint")%>';
function open_on_entrance()
url1 = '<%=(String)request.getAttribute("jasperPrint")%>';
if(url1 != null)
window.open(url1, 'iuiu', 'menubar,resizable,status,width=900,height=550,left=30,top=30');
window.onload = function(){
if(url1 == 'null'){
//alert('url is null');
}else{
open_on_entrance();
</script>
<form action="%3C%=path%20+%20">" method="post" id="reportForm" name="reportForm" >
<table width="540" cellspacing="0" cellpadding="2">
<thead>
<tr>
<td class="title">Report Type:</td>
<td class="field"><select name="reportName">
<option>Please select:</option>
<option value="vendorReport">Gate Pass - Material Return to Vendor</option>
<option value="report2">Report 2</option>
<option value="report3">Report 3</option>
</select></td>
</tr>
</thead>
<tfoot>
<tr>
<td class="align-center" colspan="2"><input type="submit" value="Submit" id="submit" name="submit" class='submit'>
<input type="reset" value="Reset">
</td>
</tr>
</tfoot>
<tbody id="report2" style="display: none;">
<tr>
<td class="title">B'First Name:</td>
<td class="field"><input type="text" name="fname" size="15">
</td>
</tr>
<tr>
<td class="title">B'Last Name:</td>
<td class="field"><input type="text" name="lname" size="15">
</td>
</tr>
</tbody>
<tbody id="report3" style="display: none;">
<tr>
<td class="title">G'First Name:</td>
<td class="field"><input type="text" name="fname" size="15">
</td>
</tr>
<tr>
<td class="title">G'Last Name:</td>
<td class="field"><input type="text" name="lname" size="15">
</td>
</tr>
</tbody>
<tbody id="vendorReport" style="display: none;">
<tr>
<td class="title">PO Number:</td>
<td class="field"><input type="text" name="poNumber" size="15">
</td>
</tr>
<tr>
<td class="title">Receipt Number:</td>
<td class="field"><input type="text" name="receiptNumber" size="15">
</td>
</tr>
<tr>
<td class="title">Advised By:</td>
<td class="field">
<div><input size="25" type="text" id="advisedBy" name="advisedBy">
</div>
<span id="spanEmp" name="spanEmp" class='hidespan'></span></td>
</tr>
<tr>
<td class="title">Prepared By:</td>
<td class="field">
<div><input size="25" type="text" id="preparedBy" name="preparedBy">
</div>
<span id="spanEmp2" name="spanEmp2" class='hidespan'></span></td>
</tr>
</tbody>
</table>
</form>
Servlet.java --------------------------------
public class ReportServlet extends SEWControllerServlet { private static final String CONTENT_TYPE = "text/html; charset=windows-1252"; public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { this.doPost(request,response); } public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { String key4nav = request.getParameter(SEWConstants.SEW_KEYS.PARAM_KEY); System.out.println("key4nav..report servlet"+key4nav); String key4next = key4nav; System.out.println("key4next"+key4next); boolean statusFlag = false; JasperReport jasperreport; Connection conn = null; try { if(key4nav.equals(SEWConstants.MODULE_PURCHASING.REPORT)) { String submitBtn = request.getParameter("submit"); String reportName = request.getParameter("reportName"); String location = SEWLoggedInUser.getLocation(); Map parameters = new HashMap(); if(request.getParameter("reportName").equalsIgnoreCase("vendorReport")) { String poNumber = request.getParameter("poNumber"); String receiptNumber = request.getParameter("receiptNumber"); String advisedBy = request.getParameter("advisedBy"); String preparedBy = request.getParameter("preparedBy"); String reportPath= request.getRealPath("/reports"); String reportImagepath= request.getRealPath("/images"); System.out.println("reportImagepath>>"+reportImagepath); jasperreport = JasperCompileManager.compileReport(reportPath+ "/vendor_report.xml"); parameters.put("poNumber",poNumber); parameters.put("receiptNumber",receiptNumber); parameters.put("location",location); parameters.put("advisedBy",advisedBy); parameters.put("preparedBy",preparedBy); parameters.put("reportImagepath",reportImagepath); conn = SEWConnectionManager.getConnection(); // response.setContentType("application/pdf"); // response.setContentLength(0); // ServletOutputStream out = response.getOutputStream(); JasperPrint jasperPrint = JasperFillManager.fillReport(jasperreport, parameters, conn); byte[] bytes= JasperExportManager.exportReportToPdf(jasperPrint); response.setContentType("application/pdf"); //response.addHeader("Content-Disposition", "inline;"); //open in current window response.setHeader ("Content-Disposition","attachment;filename=\"report.pdf\""); //open in new browser window response.setContentLength(bytes.length); ServletOutputStream ouputStream = response.getOutputStream(); ouputStream.write(bytes, 0, bytes.length); ouputStream.flush(); ouputStream.close(); if(conn!=null){ conn.close(); } }
Here i am the report Image and report xml path using
String reportPath= request.getRealPath("/reports");
String reportImagepath= request.getRealPath("/images");
Does this work on webtogo?How does it look for the location of reports folder and then the xml file?
Can you tell me how you are getting pdf in your application
Edited by: rbojja on Jul 14, 2009 1:01 PM
Edited by: rbojja on Jul 14, 2009 1:02 PM
Edited by: rbojja on Jul 14, 2009 8:42 PM

Report server run problem (urgent plz)

i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin

Report Help------------PLZ really Urgent

Hi
we are having 2 DIM in row Job Category and Cost Center,there are around 10 Job Categories and 5 Cost Centers and thesetobe selected Dynamically
now the requirement is
- After 10 Job Categories in 10 rows in 11th row Cost Center Member shoud display, generally Cost Center will come in second ROW how to bring it in first ROW just below to Job Category
forEx:
JC1
JC2
JC3
.JC10----------> JC DIM
CC1------------->Cost Center DIM
these CC and JC are selected Dynamically (@Desc or @Child.....) how can we display this???
this is really urgent please help me.....
Edited by: Kumar on Feb 10, 2011 9:03 AM

Hi
Wont take the Dimension as DIM to BOTTOM just select the members manually in to rows according to the user requirement this will work in WEB ANALYSIS.
selecting members manually differs from the tools

Reporting issue Urgent plz

Hi All,
I am having a requirement where i have to create 2 restricted key figure for month and YTD. This has to b display as below.
Under Amount Heading V hav to get two columns ie month and YTD. how can it is possible
Amount
** Month YTD
Regards
KK

Hi karanam,
Thanks for ur quick response.
First i had drag and drop the amount under that i had created the structure but when i try to drag n drop the month and ytd RKF they are coming under the key figure only not under the structure if iam missing some steps plz let me know
Regards

Very urgent urgent plz somebody help me to this question..

hai plz somebody reply me?
I have created materialized view for my report.
but i cant seem them used in sql inspector tab.its directly querried from tables..
but i want to use materialized view in my report to enhance theperformance..plz help me..
i checked my privlleges...but i am struggling for this 1week..i could not find where it goes wrong..
grant CREATE TABLE to <user>;
SQL> grant CREATE VIEW to <user>;
SQL> grant CREATE PROCEDURE to <user>;
SQL> grant CREATE ANY MATERIALIZED VIEW to <user>;
SQL> grant DROP ANY MATERIALIZED VIEW to <user>;
SQL> grant ALTER ANY MATERIALIZED VIEW to <user>;
SQL> grant GLOBAL QUERY REWRITE to <user> with admin option;
SQL> grant ANALYZE ANY to <user>;
SQL> grant SELECT ON V_$PARAMETER to <user>;
the above privellegs have been given to the owner of the EUL.
But i cant see the usage of materialized view..i have sent plus option,query governor tab-always when summary table visible option..but still not solved?
plz reply me urgently its very urgent...
regard
luxmi

If Swahili is not on the list and you would like to recommend it to Apple, please tell them at http://apple.com/feedback
This is the User support forums operated by users just like yourself. Apple rarely appears here.

Asset aquisition report (urgent help needed from abap guys working on FI m)

hi all,
i have to develop Asset Aquisition report.so i have developed it.
but in this i am not getting logic for the following---
if i enter a date like -19.12.2006
then the output of this report should show all the asset aquisition of the
company from 01.04.2006 to 19.12.2006 only.
bcoz in indian scenario fiscal year starts from 1st of april only.
but in my output it is showing all the asset aquisition from the day comapny was
started having its asset aquisition.
so plz if anyone has logic for above sceanario then plz share with me.
or any one has previously worked on this report can send the code to me
satisfying the above scenario. its very very urgent guys.
my id - [email protected]
i am looking for the reply

hi srinivas thanks for ur reply but it is not clear to me .
so if u will send me the code the it will be better for me .
my id- [email protected]
i am waiting for ur reply. if u have code for this then plz send me.
thanks yaar in advance

Urgent Plz reply: java.lang.Class not found exception

Hi All,
I am novice to j2me, I am tryiing communicate data between client and Java server. I have given project name client and midlet class name FileViewer.java.
It is compiling succesfully
but when I run it , it is giving error
Unable to create Midlet FileViewer.java
java.lang.classnot found excetption: FileViewer.java
at com.sun.midp.midlet.selector.commandaction(+47)
at javax.microedition.lcdui.Display$displayaccessor.commandaction.(+152)
at com.sun.kvem.midp.lcdui.EmulEventHandler$eventloop.run(+459)
Here is the code
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import java.io.*;
public class FileViewer extends MIDlet implements CommandListener
private Display display; // Reference to Display object
private TextBox tbViewer; // View file contents in a textbox
private Command cmView; // Command to view file
private Command cmExit; // Command to exit
private String url = "http://www.corej2me.com/midpbook_v1e1/scratch/fileViewer.hlp";
public FileViewer()
display = Display.getDisplay(this);
// Define commands
cmView = new Command("View", Command.SCREEN, 2);
cmExit = new Command("Exit", Command.EXIT, 1);
tbViewer = new TextBox("Viewer", "", 250, TextField.ANY);
tbViewer.addCommand(cmView);
tbViewer.addCommand(cmExit);
tbViewer.setCommandListener(this);
public void startApp()
display.setCurrent(tbViewer);
private void viewFile() throws IOException
HttpConnection http = null;
InputStream iStrm = null;
try
// Create the connection
http = (HttpConnection) Connector.open(url);
// Client Request
// 1) Send request method
http.setRequestMethod(HttpConnection.GET);
// 2) Send header information (this header is optional)
http.setRequestProperty("User-Agent", "Profile/MIDP-1.0 Configuration/CLDC-1.0");
// 3) Send body/data - No data for this request
// Server Response
// 1) Get status Line
System.out.println("Msg: " + http.getResponseMessage());
System.out.println("Code: " + http.getResponseCode());
// 2) Get header information
if (http.getResponseCode() == HttpConnection.HTTP_OK)
// 3) Get data (show the file contents)
iStrm = http.openInputStream();
int length = (int) http.getLength();
if (length > 0)
byte serverData[] = new byte[length];
iStrm.read(serverData);
tbViewer.setString(new String(serverData));
Alert alTest = new Alert("Alert Test", new String(serverData), null, null);
display.setCurrent(alTest);
finally
// Clean up
if (iStrm != null)
iStrm.close();
if (http != null)
http.close();
public void pauseApp()
public void destroyApp(boolean unconditional)
public void commandAction(Command c, Displayable s)
if (c == cmView)
try
viewFile();
catch (Exception e)
System.out.println(e.toString());
else if (c == cmExit)
destroyApp(false);
notifyDestroyed();
If some body has knowledge why this error is coming plz share wiht me Its urgent .
Thanks in advance.
Thanx

No, the "-g" version just means it has the debug flag turned on when they compile it.
Your problem is CLASSPATH and how to set it properly.
Use the -classpath option on java.exe when you run. Read the javadocs on the tools to find out how.
%

GR/IRN REPORT urgent

Hi guru's this is very urgent issue...
i need GR/IR accounts for one particular vendor
for this i use Tcode fbl3n... i gave GR/IR no. i was dowloading this file
sort it vendor wise.
here WE , RE two document type is there
which one i have to take report???? just tell me
( i have submit report document type WE but it snot correct ithink thats why iam asking you) pleas help me out.

Hi
Document type WE is created when goods are received... ie. in MIGO
Entry Dr Inventory a/c ; Cr GR/IR a/c
Document type RE is created at the time of Invoice i.e. in MIRO
Entry Dr GR/IR a/c ; Cr Vendor a/c
So take RE to see the GR/IR accoutns for one particular vendor.
Radha

Bw report,urgent

rrmx: stock details report,
this is std report.k,
i want to excute n get the data for last month in excel sheet,
for the excecution ,i want to submit in back ground,is there any possiblity to submit in background.(i wwant to execute this report in back ground)
plz giv me reply......

HI Murthy,
Please go through these threads
executing the query in the background
Precalculation of web templates
ALV Report: Run Nightly and deliver in the morning (to SAP inbox)
Assign points if it helps
Khaja

Refreshing JEditorPane (Urgent) plz help

hello programmers,
i'm building an html editor:
My html editor has a split pane, the 2 pane got of the split pane are JEditorPanes, one on which i write tag and the other i display them,... thankfully all's working great, my syntax is highlighting and the html is displayed well but i've got the following problem:
when i save a html page , i wanna my browser (on the right side of the slipt pane) to display the html page... it's ok .. it displays it with the method JHTMLEditorPane.setPage(file:/// directory/ file) but the problem is that when i save the page again using the same filename... my html page on the JHTMLEditorPane stays the same... it does not update...
is their a refresh function for the JEditorPane? how can i update my JHTMLPane to reflect the changes i've brought to it? ONe thing , the page changes when i save it by aother file name..... PLz help it's very urgent!!!!!!!
Bernard

Have you tried to close and then re-open the file in your editorpane after you've saved?
It will work when you change the name because it has to open the file as new. Java can't dynamically update values upon files like C does with pointers.

BI REPORTING?? urgent plz

Similar Messages

Maybe you are looking for