BI reports could not save in my favorates
Hi ,
We are using BI7 SP13 integrated with Portal.When i try to save the reports in my favorates it throws" Transport system is active can not save"
Initially we have SP10 then it was working fine.After upgraded to SP13 then issue started.
Please advice and will be rewarded.
- Kristene
Hi,
We are also facing same issue after implementing sps15 Patch. We are getting an error message "The standard transport system is active. You cannot save".
Can anybody facing this issue... or know how to resolve this.
Regards
Baby
Similar Messages
-
Photoshop CS4 "Could not save as...because file is already in use or was left open"
I have been using Photoshop for years, and CS4 for about a year now. I have never had this error message pop up until this week. It started happening right after I did the Adobe update to 11.0.2. Everytime I try to save a PSD or JPG file now (which are the only two types of files I work with), I get this message preventing me from being able to save;
"Could not save as... because file is already in use or was left open."
I have to attempt to Save as about a dozen times before it will finally save the file. Any suggestions on what could be wrong and how to remedy it? Is it the update that caused this problem?Turn off Caching of Thumbnails in Hidden thumbs.db Files
People sometimes report that they cannot manipulate their folders as they want to because Explorer has a thumbs.db file open. Windows 7 apparently generates these files for compatibility with older software that may expect such files to exist in folders with, for example, photos in them.
The good news is that (with Windows 7 Professional and above) you can disable this through the Group Policy editor:
Click the Start orb
Enter gpedit.msc in the search box and hit Enter.
Expand User Configuration - Administrative Templates - Windows Components.
Click on Windows Explorer.
Right-click the entry "Turn off the caching of thumbnails in hidden thumbs.db files" and choose Edit.
Enable the setting.
-Noel -
I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.
Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point. -
Could not save as - The file may be read-only or is already open in another application
Can anyone think of a reason why if I'm working locally on a CS3 Flash .fla on my C: drive that I would get the error:
Could not save as: C:\Users\John\Desktop\Project_File\ANNUAL REPORT RELEASE\01-19-11\report_stragegy.fla
The file may be read-only or is already open in another application. Save using a different name, or close the document and try again.
I'm running Windows 7 Home Premium 64-bit.
It happens sporadically. I haven't been able to find a reason why this error pops up when saving some of my .fla files!!
The files are not set to "read only" when I right click on them and choose 'Properties' in the Windows 7.
I found some somewhat similar situations with saving errors:
http://board.flashkit.com/board/showthread.php?t=796857
http://forums.adobe.com/message/2980090?tstart=0
http://www.actionscript.org/forums/showthread.php3?t=153738
ThanksSometimes I can save with a different file name. But sometimes I can't and start a new blank document and cut and paste from the one that won't save to the new untitled document.
-
InD blocking Ps to save a file / Could not save * because the file is already in use error
Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.
-
Could not save because file was already in use or left open
I am have several problems with Adobe Photoshop CS4. I call up Adobe for help, I pay 50.00 or 60.00 for their help with these situations that I am having. Adobe concludes the phone call saying they are closing the case cause the problem has been resolved. I told them it has not been resolved I am still having problems then the person hangs up on me. I call back cause the problems still persists, the tech person told me that I had to pay another 50.00-60.00 for the
tech support. I told him that I already paid and that I still need help, the tech guy told me that the case was closed cause it was resolved. I told them it was not
resolved and I am needing help with this particular issue. The tech person kept saying that the issue was resolved and if I needed more help that I had to pay.
This time I hung up on him and while I did that I said that the Apple Support Community was way more helpful and it was free.
So here I am 6 months later and tried everything, Here are the problems that I am having.
1. CS4 keeps quitting unexpectedly with no cause no error nothing. The blue light under the CS4 Ps is still lit and wont let me reopen the file, I then have to force quit the program. I then get these windows asking if I want to send a report, I click ignore cause I am tired of filling out those things. So I try to open the
photoshop file and I get the blue window with the Ps logo on it, its scanning everything but then it stops responding when the scan reaches the part where it says scanning memory and freezes. I then have to force quit the program again, I have to do this 5 times before it will open the file. Then Ps will unexpectedly quit after 2 hrs of working and starts the B.S. all over again. I dont know what is wrong with CS4. Other times it runs really slow and glitchy. It also happens on my Mac Book Pro, iMac and of course my Mac Pro.
I know its not the computers or the settings or anything interacting with it. I checked everything extensively from the terminal to permissions and back to the program itself and everything in between. I am needing help, the Adobe forums are of no use, I cant find anything there.
2. I keep getting this error and I am not sure what it is, this only happens when I use Ps CS4 and yes it happens on all my other Apple computers.
Error: "could not save because file was already in use or left open" not sure how to fixt this, I have already tried the permissions and it did not seem to work.
All my computers run OS X Lion version 10.7.3. I had these problems even before I upgraded to Lion, 2 months later after Lion came out. These problems have been going on since Snow Leopard. All my Macs are up to date and I did use the Disk Utilities on everything... Please help me.First off are you editing a photo that you have placed into indesign if so the in use or left open issue is a common one, the only help is to go to indesign move the picture by nugging it then go back to photoshop and try saving again, if this does not work close the indesign file then save.
On the other issue of photoshop crashing, One thing I would try would be to create another user account, Start up photoshop and only it and work with it. The reason why is to see if maybe there are some 3rd party software you have loaded on your systems that might be causing the issues. "Ya never know"
I would assume you have reinstalled photoshop on lion. Do you still have older version of OSX installed, if so try booting to them and working with photoshop to see if it works there.
Good Luck -
"Could not save a copy because the file is already in use..."
I have read previous discussions of this issue, but nobody suggested a solution. Sometimes when I use the Save As command to save an open file with the same name as an existing Photoshop file that is not currently open, I get the dreaded message: "Could not save a copy because the file is already in use or was left open."
When this happens, I have to save my open file using a different filename, then change the name in the Finder after manually deleting the original file with that name. This happened occasionally in Photoshop CS3, and is now happening more frequently in CS4. If no one can offer a solution, can someone please tell me if there is a way to officially submit a bug report? The simple truth is that Photoshop costs way too much for a well-known problem like this one to be hanging around version after version. Adobe really needs to fix this and I'd like to tell them so. Thanks!alansky1 wrote:
Adobe really needs to fix this and I'd like to tell them so.
I've run into this and I'm convinced it's not Adobe. Whenever I've gotten around the problem it's often something from Apple that got in the way.
I use a simple workaround when Finder/QuickLook isn't letting go of the file. First use a free utility like TinkerTool or Onyx to turn on the Quit command in the Finder. Whenever the Finder gives you trouble, if closing the Finder window in question doesn't solve it, just do the ol' Command-Q. It's a little faster (and maybe safer?) than force-relaunching the Finder. This usually releases files for me when all else fails; it also often cures the annoying "can't eject the volume because it's in use" messages when you've already quit every program you can find.
There's the question of why Photoshop and not others; I'm not an engineer but I think the sheer size of Photoshop files is a factor. In one instance I noticed that quicklookd was using a lot of RAM, and QuickLook has been implicated by an earlier post in this thread. It isn't unusual for a Photoshop file to be very large compared to other types of documents. It's possible that when QuickLook hits a large Photoshop file, and it does its normal thing of generating a big preview for it, it could get tied up reading that huge image long enough to block another program. Sometimes it seems like QuickLook just hangs on them. When it happens, you can try looking at Activity Monitor to see if something like QuickLook, Spotlight, or some other program is using an unusual amount of CPU or RAM.
Apple Mail (at least in 10.5) is another major offender by the way. If you attach a file to Apple Mail it will hang on to it as "open" even after you remove the attachment. Other programs will not be able to write to the file that was attached or formerly attached. Nothing short of quitting Apple Mail will make it let go of the file. You'll notice it when you delete a JPEG, PDF, Word doc (definitely not just Photoshop) attachment because you realize you need to make a change and attach it again. Attempting to export an updated one over the old one is blocked until Apple Mail is quit.
In my experience I think what Chris says is true. -
Hello,
Whenever I try to save my Keynote file, I receive an error message saying: "The document 'Backup of Backup of Oral Report' could not be saved as 'Oral Report'. Bad file descriptor".
I've tried using other name to save my file, saving the file as a backup, saving it within my documents, and on a USB, but the file won't save. I'm using Keynote '09, Version 5.1.1 (1034) on my Mac Desktop running Mac OS X Version 10.6.8
How can I fix this problem and save my file?change icloud backup to local backup on this compuet. this worked for me.
-
Could not save the document to the repository for the following reason
Hi,
Some of the Scheduled reports are getting failed because of the following Error.
Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit - (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server: frs://Output/a_242/027/084/5512178/aduu8vtfkntmvyv8lsnntas.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
i have searched about this but no use no information on the same.
So Pls let me know why this problem will occur and how to resolve this,I am new to this forum if any this is wrong pls let me know
Thanks in advance,HiShwetabh Suman
Thanks a lot for immediate response,
Please go through the following
From the logs I see a difference in the execution steps as below:
[2014-03-31 10:24:15,364] [TID:13] [INFO ] [child.RunStatusTimerTask.run():17]: calling checkRunStatus
[2014-03-31 10:24:31,887] [TID:3168] [INFO ] [child.ChildImpl.request():23]: request: [GetLoad]
[2014-03-31 10:24:31,888] [TID:3168] [INFO ] [child.ChildImpl.request():25]: response: [1]
[2014-03-31 10:24:37,879] [TID:3153] [ERROR] [webi.PublishingSubsystem.run():93]: Throwable exception caught:
com.businessobjects.rebean.wi.ServerException: Could not save the document to the repository for the following reason: [repo_proxy 30] InfoStore::ObjectExport::commit
- (Helpers::InfoStore::ObjectExport::commit) File Repository Server error : Failed to put the file to file server:
frs://Output/a_165/024/084/5511333/aqew_jeqdcjcrukoadjdtk0.wid already exists.(hr=#0x80042a4a)(Error #-2147210678 (WIS 30567)
Can you please help us understand the reason why the child.runstatustimertask.run() is called in the case where we get the failure. Because upon noticing the difference in the steps of execution I see that this method is called and after that the failure is occuring.
Also, few other findings are that :
1. The error occurs from both the nodes adaptive job servers randomly.
2. The IFRS and OFRS of one of the node is not being used at all for any file transfers (though the configurations are exactly same).
Please advise and help us get rid of the said error.
Can u give any permanent solution for us -
Hi, getting Could not save the document to the repository for the following reason: [repo_proxy 30] DocumentFacade::uploadBlob - Query execute has failed : Error occurred while attempting to reconnect to CMS : Not a valid logon token. (FWB 00003) (hr=#0x80042a70) (WIS 30567) amongst lots of other errors when scheduling.
I was logged in as administrator and attempting to schedule a webi document to my self using the email option.
thanks in advanceHi Trinath,
Could you please confirm if you could save a new report as well or not; or is it specific to scheduling.
If you are unable to save a report also then I think this is due to the path of the Input File Repository Server or its temporary directory are not pointing to the same path, and their locations are set to 2 different hard drives
BOXI3.1 Server must use the same hard drive (local or network share) for the Input File Repository Server and its temporary directory.
- Shahnawaz -
Could not save because file is locked
I have Photoshop CS6 and I have never had a problem with this before -
All of a sudden I am getting an error message when saving : " Could not save…because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
No other program is even open… I have quit every process I could in the Activity Monitor.
I have tried saving as a different file name and format, I have changed permissions for the Staff option on all of file folders.
I have even completely restarted my computer, but literally nothing has worked.
Help!No anti-virus software (they cause far more problems than they solve, at least on a semi-secure network), I don't leave Bridge running. iTunes is running, so is InerTrak (time tracking software)... so it has to be Spotlight or Time Machine unless Activity Monitor will lock files. Or it could be Quicksilver, which creates indices like Spotlight.
First thing I'm doing is adding all my hard drives to "Prevent Spotlight from searching these locations" and we'll see if this comes up again.
Could it be the Finder? Does the Finder lock the file while reading the thumbnail?
I'm surprised that there's no way to tell what process has locked the file.
OK, last bit: Why doesn't Photoshop lock the file when it's open so that other programs won't open it? -
I have PS 6 and just purchased an iMac and am running OS 10.10.1 (Yosemite). When i try to Save or Save As a file I get the following message: Could not save as "Whatever.psd" because this file is locked, you do not have necessary access permissions, or another program is using the file. Use the Get Info command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder. Any suggestions? Thanks.
Photoshop: Basic Troubleshooting steps to fix most issues
Look under Troubleshoot User Permissions.
Gene -
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
Photoshop CS3 error saving files - Could not save ... because the fileis already in use or was left
I have a problem with Adobe Photoshop CS3 that only started happening last night. Heres a description of the problem.
When I try and save a Photoshop file, I get the following error message:-
Could not save (filename). because the file is already in use or was left open
I have rebooted my computer, rebooted our server, un-installed & reinstalled Photoshop and also done a system restore, and I still have the problem. (The system restore actually caused huge problems I got the error message The licensing subsystem has failed catastrophically. You must reinstall or call customer support, except I wasnt able to reinstall or uninstall the product. The computer just would not run the installer. I had to undo the system restore.)
I can do Save For Web with no trouble and I can save files to the same location with every other Adobe product installed in the Web bundle, just not Photoshop.
We have 2 machines here with an identical set up (hardware and software) and the problem is only on one machine.
Even though Photoshop says it cant save the file, its actually saving the file in the following format:-
~psX.tmp where X is a random variable, either characters or numbers.
I have to manually open My Documents and rename the file to filename.psd so I can access it again.
Short of reformatting my computer (which Im not keen on doing because it will mean several wasted work hours and I will have to pay our IT people to come in and hook me back up to our network), how can this problem be fixed?
I have also Googled the problem and the only help I found was a suggestion to search for a psicon.dll file and rename it. This file does not appear anywhere on my system, so I'm at a loss.
I have contacted support about this issue, but thought it was also worth while to ask here at the same time.I'm having similar problems with not being able to save files after editing them (and giving them a new file-name, obviously) in Photoshop Elements 4.0. I get an error message saying (for instance): "Could not save as (whatever I'm trying to name the file) because the file is already in use or was left open". Then I see a .tmp file (that I can't open)
I did a search and found that the file was being saved twice, once within Photoshop (where I'm working with it) and also in..
"C:\Documents and Settings\Owner\My Documents\My Pictures\Temporary"
I'm assuming this is the problem, but if you have any clue as to why is this happening and what I can do about it, I'd welcome any input. I've been using PSE-4.0 for years, and this problem just started cropping up. The only (cumbersome) way around this problem has been to just make my edits (in PSE-4.0) and do a "save" under the original file name, then go into explorer and rename the file. So, in short, I cannot do what I've been doing for years, editing a picture and saving it (renamed) in the sane folder (or a different one).
I can "see" the .tmp files in PSE-4.0, but they won't open.. but they will in JASC.. odd..
Thanks-
Bob -
i am getting "could not save list changes to the server" while creating a new form in SharePoint Designer.
Actually the list was created with a custom content type. When i try to create a new form from the custom content type, it fails.
However, when i try to create a form using item content type, it creates a form successfully.
Could you please let me know hte workaroud for this.
TnxHello,
This link may be help you to create custom form using content types:
http://blog.splibrarian.com/2011/03/21/using-content-types-to-modify-the-newform-aspx-and-editform-aspx-pages/
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help <br/>(On vacation from 16th Oct to 28th Oct 2014)
Maybe you are looking for
-
Did I make a mistake in coming to BT?
Hi there Transferred from O2 broadband where i was on their 24mb contract (getting 8.5mb). I moved because BT are rolling out their Infinity (which at the time was advertised End of Sept, but now God only Knows). I've now been with BT for 3 months. I
-
I am a novis when using technology however I do try. I would like to update my music on my iPhone, iPod and my laptop. From my initial transfer I have used both my iPhone and iPod to purchase music therfore there is a greater amount of music on these
-
Is Oracle relase any certification for Primavera Unifier ?
Hello Team, Request you to please provide info of any certification for Primavera Unifier ?? Provide link if any Regards, Ankit
-
HT204150 Why doesn't iCloud retain hyperlinks or live URL addresses in contacts?
Why doesn't iCloud retain hyperlinks or live URL addresses in the iCloud address book imported from Internet Explorer 7 to my iPhone 4S?
-
I have Palm M500 and window vista 32. I downloaded 6.2 because I lost the software. Will not syronize(sp). Do I need to download a driver. Post relates to: Palm m500