BI RRI for Jump Queries
Hi,
We configured BI Jump queries from BW to ECC systems. When BW jumps on to ECC system it uses remote user configured in the Source System and it launches ITS url on ECC system which gives the results after passing user ID and Password.
My question here is:
1. Is it possible to configure such a way that it will not use Remote user configured in Source System. I am OK with creating another source system for the same SID and System. I need to know how to create additional source system for same SID and System if this helps.
2. Even if we use Remote user is there a possibility of not prompting for user ID and Password when it jumps to ECC system?
The query goes in to ECC like this
End user from BW Bex ---> ECC Remote user on ECC (How SSO will work in this case)
Is it possible to user current user by creating one more source system and a seperate RFC?
Please search the forum and you will find lots of good info on both of your questions.
Similar Messages
-
Hi All,
What is RRI and what is use of it?
What are Jump Queries and use of it?
Can any one explain me the above two concepts with some senario.
Thanks in Advnce,
Khushi.Please search the forum and you will find lots of good info on both of your questions.
-
Transport Request for Jump Queries
Hi,
When i try to create a transport request for the jump queries using the transport connection button in rsbbs tcode i am able to create only for the sender query but
my jump query has one sender and two receiver queries.
Could anyone of you tell me the process of creating a transport request for the jump query,
regards,
vamsiHi,
the request for the jump queries contains for sure the jump queries. Edit the request and double click on the entries and you will see that it transports the contents of tables rsbbsquery, rsbbsqrydir, rsbbsqrymapping... for the key arguments <your sender query> or <your sender cube>. Those table entries will contain also the information about the receivers.
regards
Siggi
Message was edited by:
Siegfried Szameitat -
SAP Tables for Bex Jump Queries
Hello Everyone,
Need to know, is there any SAP table which stores the list of jump queries in the system.
Can you share your inputs.
Regards,
JohnThanks all for the reply. I can able to get the query name using two table rsbbsquery and rszeltdir table...but i just able to get the query tech name which i dont know whether it is a summary query name or the detail query name... so how can identify ???
I have one more follow up question with reference to the SAP table...
Lets say we are creating a jump query from summary query " Query 1 " did the jumpto config on the plant characterstic and jumping to detail query " query 2".
I would like to see the query 1 to quer 2 relationship in the table.
Do we any table which stores this information, after creating the config in RSBBS. -
How to transport Jump Queries (RRI) from DPW to QPW
Hi,
I need to transport the Jump Queries from D to Q.
I have one sender Query and 2 Receiver Queries. I would like to transport them to Q. In the transport connect I can able to select the sender Query and The receiver Queries are not found.
Please let me, If I transport my sender Query will the receiver Queries will be automatically transported.
Regards,
ReddyHow have u been transporting all ur queries?
Its the sameway how u generally transport queries but make sure u find all ur 3 queries with whats underlying beneath in the flow.
In RSBBS open the assignment n on top ull see a Truck Icon - Collect & Transport. -
BAPI for jump query(T. code RRI) and Exceptions
Is there any BAPI is avaliable for jump query and Exceptions in BW System?
Thanks,
RohanHi Sanjay,
There is a 2 BAPI's for loading Catalogs
1) BAPI_QPGR_REPLICATE - to create Code group
2) BAPI_QPGR_SAVEREPLICA - to create Codes
Thanks,
Shobha -
We have a BI web app for grant financial data that currently uses jump queries (RRI). However, our users really dislike having to right click to get the context menu and select the 'goto' option. Right-clicking in web apps is not an intuitive action. Is there a way to make the field a simple link so that a single click takes them to the related query?
Thanks in advance for you help,you could declare the entire table within a href tag and use the web api cmd 'RRI'.
ie
A href="<SAP_BW_URL DATA_PROVIDER='DP' cmd='RRI' rri_receiver='your rri id number'>">
<object>
</object> /A
Now all the user does is left click on the table / graph to jump. -
How to create Jump Queries --Report to Report interface
Hi
My requirement is to create a Jump Queries in BW
How can i link 2 Queries in BW...so that when User executes Report 1 then if he want he can able to jum to Report2 for a detail information from report 1
and
How can i create a Jump from Report1 to R/3
Thanks in advanceHi BW user,
Go through these links.
http://help.sap.com/saphelp_nw04/helpdata/en/91/d2b0fc58952b46827453498c8420ad/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/156e3fefa13042e10000000a114084/content.htm
This article would also help
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
Regards,
Sunmit. -
BAdI SMOD_RSR00004 for Jump Query
Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS also its not working.
Can anybody pls guide me how to implement BADI for this jump query(RRI for Transaction).
Thanks in Advance,
Sandy.Hi Sandy,
What is the problem you are experiencing exactly?
What I had to do was in the Assignment Details choose Type "3 Table Field" for the infoobject in the query you want to pass to the transaction then fill in the field name for the source table and the fields data element and domain values.
You will also need authorisation to transaction RSRR_WEB in the source for this to work.
Hope this helps.
Cheers
Craig -
Hello Everyone,
Generally we build the jump queries in RSBBS and do the config to create jump query link from summary report to a detail report.
I know how to find the relationship for set of queries whether they have jump queries or not.
But I don't know if I have the detail query and now I need to find the parent query. I have a requirement in which the list of queries ( child queries - detail queries ) and need to find the Parent Query ( summary report) .
Steps to find the Jump query links (like summary to details query relationship).. Follow the below steps.
Go to SE11 -> RSZELTDIR table name ->
Provide your summary query name 'Query 1' in MAPNAME and OBJVERS A. Now you get
the ELTUID of that summary query
Now go to SE11 -> RSBBSQUERY and provide
ELTUID [of Query 1] and now you see list of RONAM connected with this query.
Again get RONAM from RSBBSQUERY and provide it in
SE 11 -> RSZELTDIR -- ELTUID..now you get your detailed query name 'Query 2'
in MAPNAME of RSZELTDIR
Similary I need to know how to find if I have Child query ( detail report ) and now I need to find the Parent report ( summary report). I tried finding out but did not succeed. Need your assistance.
Looking forward for your inputs.
Appreiciate your help in advance.
John.Hi John,
Try this;
1. Go to RSZELTDIR table name -> Provide your child query name 'Query2' in MAPNAME and OBJVERS A. Now you get the ELTUID of that child query (say query2ELT).
2. Go to RSBBSQUERY and provide query2ELT* in RONAM field. Don't forget to add * to query2ELT.
Now you get the ELTUID of the parent query in ELTUID ( say query1ELT).
3. Go to RSZELTDIR table and provide query1ELT in ELTUID field and OBJVERS A. Then in MAPNAME you will find the parent query.
Regards
Yasemin.... -
Hello,
I understand that to define the destiny of the jump is performed queries from the transaction RSBBS, but what is clear is not me if I define a destination for a jump querie that run from BEX analyzer, the same fate jump me serves to execute the same querie in WEB, or I have to define another to operate a Web?
Regards,You don't have to create new query to run it on Web. But it is better to have a distinction in the name space to differentiate between Bex Queries and Portal/Web queries.
In RSBBS you just need to define the name of the query where you have to jump to.It should be very simple and clear.
Hope this helps. -
Partition a cube, Jump queries.
Hi all,
1. When do we partition a cube?
2. Why should we link reports in jump queries? Where do we use them?
Thanks in advance,
Sameer.Hi,
For Partition of cube
Just right click on Infocube -> Change or doble click on the infocube to go to infocube maintenace. From the menu choose Extras ->Partioning.
Now ,if say, your requirement is to extract data as it is from different tables, you can go with view. But if there is some complex business logic to be included, you can do that in a FM.
Check the folowing links for jumping.
http://help.sap.com/saphelp_erp2005/helpdata/en/81/941139a772b30de10000000a11405a/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/5a/ec1e4203fadb2ce10000000a1550b0/frameset.htm
Please reward. -
BAdI SMOD_RSR00004 for Jump from BW Query to R/3 transaction
Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS(BW) also its not working.
Can anybody pls guide me how to implement BADI for this type jump query(RRI for Transaction).
Thanks in Advance,
Sandy.Hi Gurus, Any help on this pls...
-
Hi experts,
I am using RRI to jump from a summarized query to a detailed query (both from the same infoprovider) I've set the assignmnt details as variable for Region Infoobject which is a variable in the source and target query. The issue is that the query works fine in BEX iam not getting selection screen in the target query but when i publish in WAD its populating the selection screen for the target query as a result we get selection screen twice one for the source query and the other for the target query. Pls help me out in thisHi Arun,
Thanks for the immediate response
I tried creating a variable of type replacement path. but it doesn't work. The region variable is a user/default entry type in the source query so the target query again populates for the selection screen when we use replacement path type variable in the target query. The issue is fixed at BEX level when i use the user/default entry variable in the target query and maitained the assignement details as variable for region so when i jump to the target query it takes the same input as the source query's input at Bex level but when i jump at the WAD output it is populating the selection screen the assignment details doesn't work. hope am clear pls let me know if u require any inputs -
PLEASE EXPLAIN JUMP QUERIES........
Hi Experts,
Can someone please explain to me the concept of JUMP QUERIES.
Any documentation would be highly appreciated.
Thanks in AdvanceHi,
Jump Queries: This is also known as Report to Report Interface (RRI). Here, we have 2 queries that get linked up. One is a Sender Query and the other is a Receiver Query.
Define 2 queries and have a few characteristics in common.
Goto t.code RSBBS. Fill in the query from which you want the Jump, ie. Sender Query. Then give the name of the Receiver Query. Here, the queries are linked up.
Now, when you execute your Sender query, in the Context Menu (right click on the characteristic) you get the option of "_Go To_". On clicking that, a new screen opens up and the data from the Receiver Query is displayed.
Hope this helps.
Maybe you are looking for
-
Help analyzing GPU-Panic log on MacBook Pro 15" mid 2010
Hi! Looks lite I go the defect Invidia discrete graphic or? Referred here http://support.apple.com/kb/TS4088 I get GPU-panic for ex when I browse iPhoto (latest verison in Mavericks) Events, scrolling down with the track pad. Walking up from s
-
SQL query using Group by and Aggregate function
Hi All, I need your help in writing an SQL query to achieve the following. Scenario: I have table with 3 Columns. There are 3 possible values for col3 - Success, Failure & Error. Now I need a query which can give me the summary counts for distinct va
-
Printer Power button in not working,no light indication
Hi, HP Deskjet F2400 Series My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printe
-
I've browsed through the answers in this community and elsewhere online. From what I understand, I need to start with Snow Leopard and move on from there, but it seems to require a DVD reader, which I obviously don't have on the MacBook Air. So I tri
-
Olympus RAW files in Elements 9 and 11
RAW files from my Olympus PLE display when initially loadong from the card reader, but vanish after hiting the display all tab, never to be seen again. Any suggestions?