BI Scheduler configuration for a report

When I schedule a BI Publisher report to send out an email monthly. Where is that information stored in the configuration files? I looked around online and can't find any documentation on where it is stored. Is it stored within the report XDO file itself or in a separate location? Appreciate any input!

Ugh, my bad, too early in the morning. Totally forgot about the Scheduler schema that was built in the DB. Thanks for the quick answer

Similar Messages

Profit Center Configuration for segment reporting

Hi Experts,
We use flexible upload for first consolidation, at that time we take profit centers as prefix P company code eg., Company code: ABCD then profit center : PABCD
In LDS mapping tab page for profit center configured move with constant as "PABCD" and then for segment we use reassignment based on segment - Company code - GL accounts.
Now client requires wants to take actual profit centers for segment reporting
For this we are going to changed in LDS as follows:
1. Removed constant value "PABCD" and maintain source attributes - Profit Center in profit center
2. Removed all reassignment and configured reassigned segment based on profit centers and GL accounts is it correct procedure if not please guide me how to do
If the above is correct we expecting problem may be as under:
1. In Total Records FS items shows both Actual profit centre and PABCD how i can resolve - may be post any entry if so in which period before Balance carryforward period or after
2.We are going to execute Balance Carry forward Task in next month, what is result for FS items and profit centers, is carry forward with actual profit center or PABCD or Both
Pls give reply
Thanks & Regards
madhu yl

Hi Dan,
Thanks for speedy response and excuse me for the late reply
As per your suggestion my issue was resolved
Edited by: Madhu YL on Aug 19, 2009 6:44 AM

Schedule Process for WA Reports(Urgent)

Hi
we are using Hyperion WA 9.3.1 for our reports, now i want to schedule one of the Hyp WA reports and after running that report it should go to users Inbox,,,,,
can you help me howto schedule a WA report and send automated mail to users......
Its really urgent.........
Sri......

Hi Sri,
WA Reports are refreshed on the fly.
You don't have to schedule them like IR or FR reports.
If users are permitted to access WA reports in read-only mode, just pass-on the URL.
- Natesh

Install configuration for Crystal Reports Viewer 2011

Hi,
Is there any way to configure the defaults for Crystal Reports Viewer 2011 as part of the installation routine?
Specifically we would like to:
1. Switch off the attempt (on launch) to make an internet connection for community resources
2. Hide the side bar unless the user actually goes into the view menu to turn it on.
There's various reasons for this, but mostly it's that to get an internet connection the application has to go through the proxy server - we would rather that sort of activity was instigated by the end user on demand, not an application automatically, not least in this case because the license agreement window seems to be set to force itself to the 'front', which covers the proxy server prompt, so we can't write a script to provide automatic authentication without user intervention. It would be far better if there was a way to simply switch off this feature - and at the same time set the default 'view' settings to hide the side bar in the first place.

Hi,
Do you mean the Standalone Crystal Reports Viewer 2008: http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx
If you do then you can perform a slient install by following the instructions from the release notes:
http://help.sap.com/businessobject/product_guides/crv2008/en/xi3-1_crviewer_release_en.pdf
Those notes are provided from this webpage:
http://help.sap.com/content/bobj/bobj/index.htm

FI configuration for IFRS reporting

Hi Experts
I Need to Configure IFRS Reporting for the asset Module, can you please give me detail information regarding IFRS reporting for Asset module (Indian Scenario)
Moderator: Please, search SDN

If the FG is maintained on price control 'S' i.e. std price, system any way will post the difference to price difference account when you do settlement or order. The relevant account will have to be mainatined in OBYC for PRD.
Regards
Rakesh Pawaskar

Configuration for ROE Reporting

Hello,
I would like to ask if any of you have any best practices on how to configure ROE Reporting.
Thanks!
Ann

Hi ,
Does anybody have documents for configurating the latest web based 53 week ROE ???
Please let us know.
Thanks
Jay Gandhi

Need dynamic File name in the Schedule link for FTP Destination

Hello,
We are using Oracle BI Publisher Enterprise formerly XML Publisher
I am trying to drop a .csv file into an FTP location using the Schedule link for a report I have created. I need to run this program everyday. Is there a way I can have it drop a file with the date stamp? Currently when you hit Schedule and select FTP destination I need to specify the path of the file and I am not sure if it can accept dynamic parameters?
Can it?
I want to be able to specify "SomethingDate{sysdate}".csv
Cheers
Vijay

Hi Vijay
Im pretty sure it can not do that at the moment, not thru the scheduler UI.
What you could do thou, is set the report up as a bursting report - you're not going to split the report but the bursting engine can be fooled. With that method you can specify the file name to be used via sql
Regards
tim

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

Financial Reporting Studio 11.1.2.1 PDF not Configured for Web Server

I have installed EPM 11.1.2.1, and HFM, Planning, Essbase, Financial Reporting are all working fine except when I do a report preview in the Workspace an error is received that PDF has not been configured for this Web Server.
I have uninstalled PDF and Financial Reporting then re-installed them but I am still getting the same error. Also, I when I tried to view report from Workspace in Financial Reporting Studio, I received the following error:
error number 400 Error Description:Form already displayed; can't show modally. Function: ShowMsg. Module:GblMethods.
Your help would be gracefully appreciated.

You should review all installation guides, readmes, and the certification matrix before performing a Hyperion Installation and/or Upgrade.
Version 9.0 of Ghostscript is not supported, install ghostscript 8.6.3 - 32-bit.
From the 11.1.2.1 Certification Matrix: "Either: --Adobe Acrobat Distiller Server 8.0 or 6.0 --GPL Ghostscript 8.63; AFPL Ghostscript 8.54 or 8.51; or GNU Ghostscript 7.0.6"
From the 11.1.2.1 Installation Guide Page 110: "Ensure that a supported 32-bit version of Ghostscript is installed."
See http://www.oracle.com/technetwork/middleware/bi-foundation/oracle-hyperion-epm-system-certific-131801.xls
http://download.oracle.com/docs/cd/E17236_01/epm.1112/epm_install_11121.pdf
Regards,
John A. Booth
http://www.metavero.com

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

C# Code Example for Configuring SQL 2005 Reporting Services?

I have found the MSDN articles describing the classes, public methods, etc. for configuring SQL Server 2005 Reporting Services via WMI. I need to initially configure them and just do this:
- Report Server Virtual Directory
- Windows Service Identity
- Web Service Identity
- Database Setup
- Email Settings
- Execution Account
Is there a C# code example that already exists putting together all of this? I didn't want to reinvent the wheel if I didn't need to.
-Ed

Jin,
Thanks so much! This is great! Your work is awesome!
I have a couple of issues that came up...
1) CreateVirtualDirectory.vbs creates the virtual directory for the Report Server just fine. Now how do I distinguish a script to create the virtual directory for the Report Manager?
2) I decided to go ahead and use what you did for scripting CreateApplicationPool (using http://msdn.microsoft.com/en-us/library/ms155349(SQL.90).aspx). I found the syntax is wrong here when I kept getting an error, so I put PowerShell on the server and pulled the following info:
Name : CreateApplicationPool
MemberType : Method
Definition : System.Management.ManagementBaseObject CreateApplicationPool(System.String Name, System.Boolean UseBuiltIn
Account, System.String Account, System.String Password)
However, I'd like to use "NT Authority\NetworkService" or "Network Service" as the account (which is an option for the Builtin accounts when I us RSConfigTool.exe). This is the syntax I used:
objInParam.Properties_.Item(
"Name") = "ReportServer"
objInParam.Properties_.Item("UseBuiltInAccount") = true
objInParam.Properties_.Item("Account") = "NT Authority\NetworkService"
objInParam.Properties_.Item("Password") = ""
But I always get an error with a negative number for the HRESULT.
Any ideas?-Ed

Configure for Report writer

Hi
I have a ZZZZ transparent table with data, that is not a pool or cluster table, and would want to be able to use Report Writer to search from this table and create RW reports.
1. Is this possible?
2. What are the set up tables needed to configure for RW? I could think of only T804A and T804B.
Does anyone have a soft copy of the steps in doing this? I am going through the SAP Help and it seems that there are steps missing, and I am unable to complete the process of creating a custom Library for this table.
Thank you
Priya

COPA is a mini data warehouse and each company have to define the datasource structure, called profit segment, based on their own profit analysis requirement before they create any PA reports. Since the profit segment could be different from company to company, no univeral PA report can be used for all companies, that is also why SAP normally do not provide any standard reports in KE30.
So, you have to first define the characteristics, value fields, and profit segment with the characteristics and value fields (KEA0). Then create your own PA reports with the segment you define forms (KE34, KE31).
Forms are the structures required as the basis for the definition of reports
Regards

Configuration for Chracterstica values in drilldown report

HI All,
I am working on FI drill down report.
The drilldown report is working fine.But the problem is I want to select some chractetsics in the report form of general data selection section.
When i am selecting the field the company code is also along with that.
For example if i am selecting RACCT the bukrs is also coming automaticaaly with that.
Please anbody let me know what would be the problem.
I want to know where we do configure in SPRO all the chracteric values for drilldown reports.
Thanks

Hi Fi experts,
Please anybody let me know from where the CHracerstic values come into FI drill down report.
Please let me know the configuration path.
Thanks,

RFC configuration for system monitoring / Early Watch reports

Hello Basis Gurus:
Please help me out.....
The early watch reports in the solution manager of my system are failing consistently to execute.This is happening for all the 3 systems DEV,QAS,PRD.when i click on individual earlywatch reports it takes me to a screen which says "data for this report is overdue.....go to your satellite system SDCCN to see why the data was not sent...."
It says ...check the following things.....
"The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data."
I can see the task processor job , and the periodic Maintenance package scheduled everyday and completed sucessfully.So is it the RFC which is causing the problem.
Im SM59 of the solman, i can see system generated RFCs for the PRD,DEV,QAS and SND (...3 for each of these systems...).
say for PRD, these are the 3 RFCs.
1.)SM_PRDCLNT<client#>_READ.
2.)SM_PRDCLNT<client#>_TMW.
3.)SM_PRDCLNT<client#>_TRUSTED.
I am not sure which RFCs among the 3 for any given system does the solman use to communicate to the satellite systems.
*The user id section in the Logon Data of any of these RFCs is blank.and the password says "is initial"...*is this correct.Does the user id have to be a communication type of user...
PLeaase advise as to what could be going wrong..
Regards.

Hi,
The system uses ABAP Connection (Connection Type 3) to connect to different Systems to execute Functional Calls.
Now in your case, there are 3 different connections meaning your Basis Team has used 3 connections for different connection activities. This is totally a business dependent scenario.
Now each time you create a RFC Connection, the system will need the following information to remotely call another system, they are:
Host Details of Target System
Logon Details to remotely login
For RFC Connections the User Type has to be Communications User. But there are companies which use Dialog User Types as well to remotely login for some cases. When the User ID is created for an RFC User and a Password is assigned to it, this Password is considered as the Initial Password by the system. This Password is taken as the Initial Password in the RFC Connection as well.
There can be cases where the system is Trusted and there is no need of a password, but an Username is mandatory in all cases. Remember if you set the system as Trusted, the password option gets deactivated and the connection wont work, if the system does not have the Trusted status.
But in any case you must assign the Username alongwith the Client and Language Details in the RFC Connection for it to work.
Hope this helps.
/Manoj

BI Scheduler configuration for a report

Similar Messages

Maybe you are looking for