BI Services and Xcelsius Caching

Does BI Services use Xcelsius Caching??
Is BI Services faster than Live office??
Thanks In Advance

Hello Ragav,
Well to answer your question is it really improves the performace to be very honest you have to test it.
If you may have a look to the section
1. Why add new Xcelsius servers ?
Prior to XI 3.1 SP3
the request is sent to BOE and query sent again to the datasource (SQL or MDX execution in the case of a database).
With XI 3.1 SP3
the request is sent to BOE, the data set is retrieved from the Xcelsius cache server and sent back to the user.
This will sure address plenty of performace and avoid un-necessary hits to DB.
Only thing is to check the performace you have to try that in your environment and see if that works as an option for you.
because the dataset I might be having will be different than yours.
I would recommend use these two SAP Notes together and give it a try on your test machine: -
1482395 How to activate Xcelsius cache / process servers on BOE after the SP3 installation?
1547084 QAAWS from Xcelsius to Oracle fails with "Failed to run Query" error message
Happy Testing.
- Vivek

Similar Messages

Content delivery service VS. network cache

hi,
Ps clarify what's differences between content delviery service and network cache?
difei

Hi,
I gather you are talking about the ACNS software that has both the ecdn and caching application on it? He is an explanation of both applications.
ECDN
The ECDN is an application that pre-positions content at the network edge. This is done using a management GUI. The content is managed from a device called a CDM (Content Delievery Manager). The content is first loaded onto the CDM and then scheduled for distrubution to the edge nodes (CE Content Engines).
When the content is requested, a http request is sent to the CDM and the CDM decides which edge node to send the client to to serve the content. This is done on source IP of the http request. When the CDM works out the closest node the CDM issues a http 302 redirect to the client with the address and a special url to the CE that is closest to the client that has the content.
The CDM is configured with coverage zones for each CE (IP address ranges each CE can serve) and uses this to make a choice to which CE is going to serve the content.
Please see this url for more in-depth information
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns41/ecdn41/chap1.htm
CACHING
Caching is different in that we do not manage it centrally, we do not pre-position content (althought this can be done with pre-loading), we do not use a central point to determine which cache to use.
Caching is done in one of 2 ways. Transparent or Proxy.
For an explanation of these please see the following URL.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns41/cnfg41/index.htm
With caching we take the users request to the internet and proxy it. When the request come back when then cache it (if it is cachable) and send the request back to the client. Depending on if we are running transparent or proxy depends on the protocols that we can proxy/cache.
This url will explain it in more detail.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/uce/acns41/cnfg41/overview.htm

Query as a Web Service and In List

Hi,
Here is my scenario (Xcelsius 2008 Enterprise SP2):
- List builder object which returns multiple values
I want to use those values to filter a Query as a Web Service data connection (to BW based universe). How is that possible?
My web service contains a Filter defined as <Dimension> In List <Prompt>
I have tried the following:
1) Selected multiple rows in the Input Values/Read From section of the connection
2) Tried to concatenate the individual values using ; and , and then passing the concatenated values to the Read From section of the connection (as one cell)
1) works fine as long as I just select one value, but when I select multiple values, only the first one is used to filter the QaaWS
2) Does not work
Any ideas/suggestion on how to solve this?
Thanks in advance,
Jacob

Hello David,
I tried this feature of BI Services through WebI Rich Client. But I am having problem with sending values for Prompts using Xceslius. Below is the procedure I followed in developing a report and using BI web service to connect to Xcelsius.
1) Build a report in Web Intelligence rich client along with Query filters (Inlist, Optional Prompts).
2) Activate BI Service and publish the block after exporting the file.
3) Use the WSDL URL to connect to Xcelsius from Data Connection (Add as Query As Web Service and Import it).
4) Method: Get_ReportBlock_<Block name>,
    set input values <Enter_value_s_for_prompt>
        i) Valueofprompt (bind to single values, hard coded)
       ii) Index (leave blank, not binded)
5) set <refresh> as 1 (or true) and <getfromlatestdocumentinstance> as 0 (false)
6) Bind the output values to excel and pull a scorecard component to view the data.
7) Preview the dashboard and now I get this error
                Cannot Access external Data: String index out of range: -1
When I remove both the values inserted in step 5, I get complete data (prompt is not applied). I also have a doubt whether I can pass multiple values for the prompt without using + sign to duplicate the Prompt.
From some of the previous posts I came to know about Value formatting compatibility issue between BI Services and Xcelsius. Which is addressed with two fix packs
1) XI 3.1 SP2.5 (available since last March) for WebIntelligence Rich Client & BI Services, and
2) Xcelsius 2008 SP3.1 (available since last April).
Are these the up to date Fix packs available and will they solve my problem?
Where can I download them from (SAP Market place)? or from our SAP service consultant?

Does Weblogic Portal Server provides caching services and multilingual support

I wanted to know whether Weblogic Portal Server 8.1 has got the facility for caching
services and multilingual support?

is this JSF-portlet.jar bridge file used to create .portlet file from the JSF file so that the portlet file may be added in the portal?
And if you were able to solve the issue by removing the bridge jar file itself, how does that help? if that is the one that would help in creating portlets.
If anyone have been able to create a .portlet file from JSF and deploy in Weblogic 8.1, let me know.
Thanks,
-RAJIV.

BI services and xcelisus

Hi,
I am creating a dashboard using live office ( i need crosstab reports, so using live office connecting to a webi report). but my webi reports are taking long time to run, so dahboards are also. so i thought to create cache the reports data and use it in dashboards. but i am new to BI serives, can anyone expalin me how to use BI services and cross tabs reports in xcelsius.
Do i need any addin in xcelisus components?
Thanks
Krishna

Hi Krishna,
BI Services can be consumed without restriction I know by Xcelsius 2008 SP3 and above. You simply need to define a new QaaWS connection from the Xcelsius data manager and map it to the BI Service call you want (QaaWS connections will enable to use serialized sessions if you want to consume the dashboard from Infoview).
You can improve dashboard interactivity and scalability as BI Services enable to leverage scheduled documents as well as pass report filters.
BI Services can be designed from WebI report parts with a specific designer available with XI 3.1 SP2 (and above) WebI Rich Client. FYI, this designer is also available from Webi applet in Infoview since release 4.0
Hope that helps,
David.

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Sharepoint 2013 search error - The search application 'Search Service Application 1' on server is not provisioned.Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running on the server.

Hi All,
I'm getting the below error in My SHarepoint 2013 search Administration page.
Crawler background activity - The search application 'Search Service Application 1' on server "" is not provisioned. Confirm that the Microsoft SharePoint Foundation Timer service and Central Administration service are running
on the server.
and when i click on Crawl Log and content source
it throws the below error
The search service is currently offline. Visit the Services on Server page in SharePoint Central Administration to verify whether
the service is enabled. This might also be because an indexer move is in progress
When i check the search status
Get-SPEnterpriseSearchServiceInstance, it shows all the components are online.
As of now search service application is online and search is working.But not sure why it throws the above error.
I have restarted timer service,search service in services.msc and cleared the sharepoint cache as well.
But no luck,This is happening in my prodcution environment.
Any help will be greatly appreciated.
There are the logs i have found
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.71 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.73 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djs2 High [Forced due to logging gap, cached @ 05/23/2014 13:03:22.76, Original Level: VerboseEx] {0} d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.79 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Database 8acb High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.80 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Server Search Administration djj1 High Unable to find application 'b9c8106c-c7ed-4eb3-96c9-ae1881ffb695' d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General 8nca Medium Application error when access /_admin/search/listcontentsources.aspx, Error=The search service is currently offline. Visit the Services
on Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.   at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Runtime tkau Unexpected Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on Server page in SharePoint Central
Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.    at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object sender, EventArgs e)
at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.SPException: The search service is currently offline. Visit the Services on
Server page in SharePoint Central Administration to verify whether the service is enabled. This might also be because an indexer move is in progress.     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.ErrorHandler(Object
sender, EventArgs e)     at Microsoft.Office.Server.Search.Internal.UI.SearchCentralAdminPageBase.OnError(EventArgs e)     at System.Web.UI.Page.HandleError(Exception e)     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     at System.Web.HttpApplication.ExecuteStep(IExecutionStep
step, Boolean& completedSynchronously) d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General aat87 Monitorable  d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24q Unexpected SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts are present in the farm. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation DistributedCache ah24w Unexpected Unexpected Exception in SPDistributedCachePointerWrapper::InitializeDataCacheFactory for usage 'DistributedViewStateCache'
- Exception 'System.InvalidOperationException: SPDistributedCachePointerWrapper::InitializeDataCacheFactory - No cache hosts present in the farm.     at Microsoft.SharePoint.DistributedCaching.SPDistributedCachePointerWrapper.InitializeDataCacheFactory()'. d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation General ajb4s Monitorable ViewStateLog: Failed to write to the velocity cache:
http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3-c3e4-4097-85fd-aa5248346d2e d4c6939c-b10d-4000-6d95-14caeefe67df
05/23/2014 13:03:22.82 w3wp.exe (0x46E70) 0x4CBA4 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://dca-app-617:90/_admin/search/listcontentsources.aspx?appid=e830c1b3%2Dc3e4%2D4097%2D85fd%2Daa5248346d2e)).
Execution Time=109.695855199474 d4c6939c-b10d-4000-6d95-14caeefe67df
Anil Loka

Please try below mentioned steps:
1. Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service Timer Job" > Disable
2. Then open windows administrative services (services.msc), stop SharePoint Timer Service
3. Clear SharePoint Timer configuration cache by following steps mentioned in below blog:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
4. Start SharePoint Timer Service and give it a few seconds so that the new XML files from the location you deleted then are re-populated.
5.Central Administration > Monitoring > Review job definitions > Look for following timer job "Application Server Administration Service" Timer Job > Enable
Please ensure that you mark a question as Answered once you receive a satisfactory response.

Foundation 2013 Farm and Distributed Cache settings

We are on a 3 tier farm - 1 WFE + 1APP + 1SQL - have had many issues with AppFab and Dist Cache; and an additional issue with noderunner/Search Services. Memory and CPU running very high. Read that we shouldn't be running Search
and Dist Cache in the same server, nor using a WFE as a cache host. I don't have the budget to add another server in my environment.
I found an article (IderaWP_CachingFormSharePointPerformance.pdf) saying "To make use of SharePoint's caching capabilities requires a Server version of the platform." because it requires the publishing feature, which Foundation doesn't have.
So, I removed Distributed Cache (using Powershell) from my deployment and disabled the AppFab. This resolved 90% of server errors but performance didn't improve. Now, not only I'm getting errors now on Central Admin. - expects Dist Cache
- but I'm getting disk operations reading of 4000 ms.
Questions:
1) Should I enable AppFab and disable cache?
2) Does Foundation support Dist Cache? Do I need to run Distributed Cache?
3) If so, can I run with just 1 cache host? If I shouldn't run it on a WFE or an App server with Search, do I have to stop Search all together? What happens with 2 tier farms out there?
4) Reading through the labyrinth of links on TechNet and MSDN on the subject, most of them says "Applies to SharePoint Server".
5) Anyone out there on a Foundation 2013 production environment that could share your experience?
Thanks in advance for any help with this!
Monica
Monica

That article is referring to BlobCache, not Distributed Cache. BlobCache requires Publishing, hence Server, but DistributedCache is required on all SharePoint 2013 farms, regardless of edition.
I would leave your DistCache on the WFE, given the App Server likely runs Search. Make sure you install
AppFabric CU5 and make sure you make the changes as noted in the KB for
AppFabric CU3.
You'll need to separately investigate your disk performance issues. Could be poor disk layout, under spec'ed disks, and so on. A detail into the disks that support SharePoint would be valuable (type, kind, RPM if applicable, LUNs in place, etc.).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error while starting the service "oracle client cache"

hello everyone,
I keep getting an error message: while i'm starting the service "oracle
client cache "
The instruction at 0x7c911e58 referenced memory at 0x00000000. The
memory
could not be read.
please help me in rectifying this error ASAP
so that i can proceed further in my work
thanks in advance

Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers.

Read-Through Caching with expiry-delay and near cache (front scheme)

We are experiencing a problem with our custom CacheLoader and near cache together with expiry-delay on the backing map scheme.
I was under the assumption that it was possible to have an expiry-delay configured on the backing-scheme and that the near cache object was evicted when backing object was evicted. But according to our tests we have to put an expiry-delay on the front scheme too.
Is my assumption correct that there will not be automatic eviction on the near cache (front scheme)?
With this config, near cache is never cleared:
             <near-scheme>
                  <scheme-name>config-part</scheme-name>
                  <front-scheme>
                        <local-scheme />
                  </front-scheme>
                  <back-scheme>
                        <distributed-scheme>
                              <scheme-ref>config-part-distributed</scheme-ref>
                        </distributed-scheme>
                  </back-scheme>
            <autostart>true</autostart>
            </near-scheme>
            <distributed-scheme>
                  <scheme-name>config-part-distributed</scheme-name>
                  <service-name>partDistributedCacheService</service-name>
                  <thread-count>10</thread-count>
                  <backing-map-scheme>
                        <read-write-backing-map-scheme>
                              <read-only>true</read-only>
                              <scheme-name>partStatusScheme</scheme-name>
                              <internal-cache-scheme>
                                    <local-scheme>
                                          <scheme-name>part-eviction</scheme-name>
                                          <expiry-delay>30s</expiry-delay>
                                    </local-scheme>
                              </internal-cache-scheme>
                              <cachestore-scheme>
                                    <class-scheme>
                                          <class-name>net.jakeri.test.PingCacheLoader</class-name>
                                    </class-scheme>
                              </cachestore-scheme>
                              <refresh-ahead-factor>0.5</refresh-ahead-factor>
                        </read-write-backing-map-scheme>
                  </backing-map-scheme>
                  <autostart>true</autostart>
                  <local-storage system-property="tangosol.coherence.config.distributed.localstorage">true</local-storage>
            </distributed-scheme>With this config (added expiry-delay on front-scheme), near cache gets cleared.
        <near-scheme>
                  <scheme-name>config-part</scheme-name>
                  <front-scheme>
                        <local-scheme>
                             <expiry-delay>15s</expiry-delay>
                        </local-scheme>
                  </front-scheme>
                  <back-scheme>
                        <distributed-scheme>
                              <scheme-ref>config-part-distributed</scheme-ref>
                        </distributed-scheme>
                  </back-scheme>
            <autostart>true</autostart>
            </near-scheme>
            <distributed-scheme>
                  <scheme-name>config-part-distributed</scheme-name>
                  <service-name>partDistributedCacheService</service-name>
                  <thread-count>10</thread-count>
                  <backing-map-scheme>
                        <read-write-backing-map-scheme>
                              <read-only>true</read-only>
                              <scheme-name>partStatusScheme</scheme-name>
                              <internal-cache-scheme>
                                    <local-scheme>
                                          <scheme-name>part-eviction</scheme-name>
                                          <expiry-delay>30s</expiry-delay>
                                    </local-scheme>
                              </internal-cache-scheme>
                              <cachestore-scheme>
                                    <class-scheme>
                                          <class-name>net.jakeri.test.PingCacheLoader</class-name>
                                    </class-scheme>
                              </cachestore-scheme>
                              <refresh-ahead-factor>0.5</refresh-ahead-factor>
                        </read-write-backing-map-scheme>
                  </backing-map-scheme>
                  <autostart>true</autostart>
                  <local-storage system-property="tangosol.coherence.config.distributed.localstorage">true</local-storage>
            </distributed-scheme>

Hi Jakkke,
The Near Cache scheme allows to have configurable levels of cache coherency from the most basic expiry based cache to invalidation based cache to data versioning cache depending on the coherency requirements. The Near Cache is commonly used to achieve the performance of replicated cache without losing the scalability aspects of replicated cache and this is achieved by having a subset of data (based on MRU or MFU) in the <front-scheme> of the near cache and the complete set of data in the <back-scheme> of near cache. The <back-scheme> updates can automatically trigger events to invalidate the entries in the <front-scheme> based on the invalidation strategy (present, all, none, auto) configured for the near cache.
If you want to expire the entries in the <front-scheme> and <back-scheme>, you need to specify an expiry-delay on both the schemes as mentioned by you in the last example. Now if you are expiring the items in the <back-scheme> for the reason that they get loaded again from the cache-store but the <front-scheme> keys remain same (only the values should be refreshed from the cache store) then you need not set the expiry-delay on the <front-scheme> rather mention the invalidation-strategy as present. But if you want to have a different set of entries in <front-scheme> after a specified expiry delay then you need to mention it in the <front-scheme> configuration.
The near cache has the capability to keep front scheme and back scheme data in sync but the expiry of entries is not synced. Always, front-scheme is a subset of back-scheme.
Hope this helps!
Cheers,
NJ

Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start

Hi,
I've been trying for weeks now to try to get Office Professional Plus 2013 to install on Windows 8 Pro. My system has been running perfectly otherwise.
When I try to install Office 2013, I get the following message (excerpt from log file):
2012/11/27 22:26:30:885::[4576] MSI(ACTIONSTART): 'Action 22:26:30: StartServices. Starting services'
2012/11/27 22:27:00:949::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:00:949::[4576] Log level changed from: Standard to: Verbose
2012/11/27 22:27:00:949::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:05:964::[4576] Message returned: 4
2012/11/27 22:27:05:964::[4576] WER is not considering last MSI error event
2012/11/27 22:27:39:105::[4576] MSI(ERROR): 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:27:39:105::[4576] Showing message Title: 'Setup', Message: 'Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.'
2012/11/27 22:30:59:948::[4576] Message returned: 2
2012/11/27 22:30:59:948::[4576] WER element [P5] is set to value [Error 1920. Service 'Windows Font Cache Service' (FontCache) failed to start. Verify that you have sufficient privileges to start system services.]
2012/11/27 22:30:59:948::[4576] WER element [P5] is converted to [1920]
2012/11/27 22:30:59:948::[4576] WER element [P7] is set to value [0x780]
I have tried everything I can think of, and everything on every thread I've found on related topics. No luck. If I try to start the service myself via services.msc I get the following message:
The Windows Font Cache Service service on Local Computer started and then stopped. Some Services stop automatically if they are not in use by other services or programs. Any assistance anyone can provide would be greatly appreciated!

Hi micrey! It works!
1. Type “services.msc” into the Start Search
bar and hit Enter.
2. Find the Windows Font Cache Service, select
it and hit “Stop”.
3. Open Windows Explorer and navigate to “C:\Windows\ServiceProfiles\LocalService\AppData\Local”
requires admin privileges
4. Delete the FontCache dat files. (They will
be regenerated over time.)
5. Restart the Windows Font Cache Service.
Thank you!

Difference between Crystal Report and Xcelsius ?

Hi,
I am newbie to CR and Xcelsius. In most of the articles I read about CR and Xcelsius, I could not understand the difference between these two. Can anyone tell me in simple technical language whats the difference ?
Also, does Xcelsius works only with Excel sheet ? Whats about pulling data frm Mysql to show data ?
Thanks,
Prashant

Hi Prashant,
Xcelsius is a dashboarding tool. In its simplest format it takes data from an Excel sheet and displays it graphically. It is possible to import live data into Xcelisus, primarily through Web service connections and Excel XML maps. It produces swf files (flash).
Crsytal Reports is a toll for building reports. These are reports typically laid out in a header, detail footer format, though there is a high level of control over the display. Crystal Reports will connect to almost anything, Relational DBs, Excel, XML data. Business Objects Universes. You can imbedd Xcelsius swf files into Crystal Reports.
In summary, CR is for reporting and Xcelsius is for dashboarding
Try help.sap.com and business objects for the product overview documents.
Regards
Alan

Authentication to CR and Xcelsius

Hi All,
What authentication mechanisms are supported by Crystal reports and Xcelsius when connected to Web Serves, i.e. WSE3.0/WCF etc
In what scenarions Win AD will work for Crystal reports and Xcelsius.
Is it possible to setup WinAD SSO for custom .net Web services from Crystal Reports and for Xcelsius.
Thanks in advance for your help.

web services can be set up with vintela SSO (look up key words liveoffice SSO on SAP notes). This will work for live office and qaaws (3.1).
Crystal and Xcelsius can consume WSDL's made in qaaws but this will not enable SSO for the client. Currently SSO to Crystal and Xcelsius clients is not supported.
Regards,
Tim

Forms/Reports: Role of the Database cache and Web cache

Hello oracle experts,
I am running a purely Forms and Reports based environment (9iAS).
My question are:
a. Is it possible to use features from the Web Cache and
Database Cache to boost the performance of my applications?
b. Are all components monitorable from the OEM?
Please guide me so that i can configure my OEM to monitor my
forms and reports services.
thanks in advance for your reply
Kind regards
Yogeeraj

Hi BradW,
The way this is supposed to be done in Web Cache is by keeping separate copies of a cached page for different types of browsers distinguished by User-Agent header.
In case of cache miss, Web Cache expects origin servers to return appropriate version of the page based on browser type, and the page from the origin server is just forwarded back to browser.
Here, if the page is cacheable, Web Cache retains a separate copy for each type of User-Agent header value.
And when there is a hit on this cached page, Web Cache returns the version of page with the User-Agent header that matches the request.
Check out the config screen titled "Header Association" for this feature.
About forwarding requests to different origin servers based on User-Agent header value, Web Cache does not have such capability.

Issue bringing up Shared Services and Planning

Hi guys,
We have added 3 new MSAD to our Shared Services for user authentication, previously we already had 2 setup and working fine.
Now that we added the 3 new ones, we restarted Planning and Shared services and now it doesn't come back up.
We see the following error message on the logs:
2009-11-27 17:05:09,702 [Thread-23] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.updateUserCache(Unknown Source) - Ignoring User. Error getting User for User Cache:[LDAP: error code 32 - 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of:
     'DC=IL,DC=x,DC=Corp'
2009-11-27 17:05:09,811 [Thread-23] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.updateUserCache(Unknown Source) - Ignoring User. Error getting User for User Cache:[LDAP: error code 32 - 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of:
     'DC=IL,DC=xx,DC=Corp'
2009-11-27 17:05:09,936 [Thread-23] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.updateUserCache(Unknown Source) - Ignoring User. Error getting User for User Cache:[LDAP: error code 32 - 0000208D: NameErr: DSID-031001CD, problem 2001 (NO_OBJECT), data 0, best match of:
     'DC=IL,DC=xx,DC=Corp'
These "xx" we are just using because of the company name but it has the right name
That's the security log for Shared Services.
Do you have an idea of what I can do either to bring it up with the new MSAD or delete the newly created and bring it back up?
Thanks in advance

Usually your MSAD admins will have a master domain setup that has access to all geographic specific domains. You would have a user setup in this higher level domain
Let's say you have the following setup:
na.ad.co.com
sa.ad.co.com
eme.ad.co.com
jp.ad.co.com
cn.ad.co.com
You would just need one domain setup at ad.co.com with a user who has read access to that directory. The way Shared Services security is setup you may need to re-provision some users with that new global provider and I highly recommend using a group filter -- your group filter can be in any of the domains just all users would need to be added to it in that domain.
Regards,
John A. Booth
http://www.metavero.com

BI Services and Xcelsius Caching

Similar Messages

Maybe you are looking for