BI & Solution Manager
Dear Expert,
We are in review of using the BI with solution manager.
I get to know that we have 2 options:
1. to use BI content that come with SAP solution manager (in different client)
2. to connect Solution Manager system to another NetWeaver BI system
Which option is the best, any impact on BI system, performance, system resource?
please advise.
thank you
Hi SH,
thank you for the reply.
Is there any guide that I can refer to setup the BI client in solution manager step by step?
e.g. what to activate in BI client of solution manager, how is the connection suppose to configure, Solution manager as source system for BI client, etc etc.
The SAP Library unfortunately do not contains the technical information that I need.
thank you very much
Similar Messages
-
Create a Support Message in Production system showing up in Solution Manage
Has anyone setup the link between creating a support message (under help) in a production system (like ECC) and SAP's Solution Manager.
I understand that it uses BADI SBCOS001 with the interface method PREPARE_FEEDBACK_BO, but when I try to run it, it tells me that Customizing for feedback functionality missing. What functionality is missing? And how to I correct this? And how do I ensure it shows in SAP Solution Manager under a solution or project?
Thanks
PaulHi Paul
The only way is to use the IMG. I have just completed this via the IMG info. BUT, it is not that simple.
Make sure your RFC's are trusted and that you have SAP ALL during config.
I hope this will help:
Setup Service Desk
Steps to follow while configuring support desk.
1) Implement the note 903587 .
2) Create all the relevant RFC objects in the satellite system and add the appropriate logical components using transaction SMSY.
3) Check all the objects in the table BCOS_CUST using transaction SM30.
Appl : OSS_MSG
+ :W
DEST :BACK RFC NAME (for solution manager system keep this field as 'NONE')
+ :CUST 620
+ :1.0.
*4) Check whether the BC sets are activated or not using the transaction SCPR20.If the BC sets are not activated then implement the note 898614.The steps to activate the BC sets are described below
4.1) Activate SOLMAN40_SDESK_BASICFUNC_000 BC Set.
4.2) Activate this in expert mode with option u201COverwrite everythingu201D.
4.3) Activation of the following components has to be done by replicating the previous steps
3.1) SOLMAN40_SDESK_TPI_ACT_AST_001
3.2) SOLMAN40_SDESK_ACTIONLOG_001
3.3) SOLMAN40_SDESK_ACT_ADVCLOSE_001
3.4) SOLMAN40_SDESK_TEXTTYPES_001
*Depends upon the number of inactive BC set objects that we have after the upgrade.
4.4) if the actions mentioned in 4.3 are not listed while executing the transaction SCPR20, then implement the note 898614.In the source client 000 of the solution manager system create a transport request using transaction SE09, unpack the file 'PIECELIST_SERVICE_DESK_INIT.ZIP' from the attachment of the note. Copy the contents of the file 'PIECELIST_SERVICE_DESK_INITIAL.TXT' to the transport request. And activate the actions. Use transaction SCC1 to import the transport request to the solution manager client. If any short dump occurs during the activation, implement the note 939116.
5) Check whether the number range is set correctly. If not set the number ranges of basic notification (ABA) and the support desk message (Service transaction SLFN).To be able to use the same number ranges for both message types, the internal number range for basic notification (ABA) must correspond to the external number range for the support desk message.
Number ranges for ABA notifications
5.1) create an internal and external number range using transaction DNO_NOTIF.
5.2) assign number range intervals to groups internal and external.
5.3) SLF1 is the internal number range group
5.4) SLF2 and SLF3 is the external number range interval
5.5) Use transaction DNO_CUST01 to assign message categories to the number range.
5.51) Go to transaction DNO_CUST01
5.52) From the GOTO menu select the menu item DETAILS
5.53) Now you can assign the number range of basis notification (ABA) into the notification type.
The number range for ABA notification is 12 characters in length and to make it compatible with the CRM service transaction insert 2 ZEROES at the beginning.
Number ranges for Support Desk notification
5.54) Use transaction CRMC_NR_RA_SERVICE, and define the internal and external number ranges. Intervals must correspond to the intervals of the basic notifications (ABA notification).
5.6) Then assign both the external and internal numbering
5.61) Go to SPRO and then to SAP Solution Manager
5.62) Then select General Settings and then select Transaction types
5.63) Select the transaction type SLFN and then select the menu item DETAILS from the GOTO menu.
5.64) In the Transaction Numbering block, assign the internal and external number range. The Number Range object should be CRM_SERVIC.
5.7) To view the priorities use transaction DNO_CUST01 and select the notification type as SLF1 and then select priorities from the left pane of the screen. The priorities of the first four cannot be deleted, but new priorities can be added.
6) Check the Action profiles for ABA Notifications (Action profiles are used for synchronization of ABA notification with the CRM Service transaction).
6.1) To check the action profiles use the transaction SPPFCADM and select the application type DNO_NOTIF then select u2018DEFINE ACTION PROFILE AND ACTIONSu2019.
6.2) Select the item u2018SLFN0001_STANDARD_DNOu2019 and then from the menu GOTO, select the menu item DETAILS.
7) The Action profile u2018SLFN0001_STANDARD_DNOu2019 has to be assigned to the message category SLF1 (ABA notifications) using the transaction DNO_CUST01.
8) The action profile for the support desk message can be set to u2018SLFN0001_ADVANCEDu2019.
8.1) From SPRO select SAP Solution Manager then Scenario Specific Settings.
8.2) Select the item Service Desk and then to general settings.
8.3) Execute the category u2018Define Transaction Typesu2019.
8.4) Select the transaction type as SLFN
8.5) From the GOTO menu select the menu item u2018DETAILSu2019 and assign the action profile as SLFN0001_ADVANCED .
9) Activate the partner/ Organization
9.1) Go to CRM->MASTER DATA->BUSINESS PARTNER->INTEGRATION BUSINESS PARTNER ORGANIZATION MANAGEMENT->SET UP INTEGRATION WITH ORGANIZATIONAL MANAGEMENT.
9.2)Find the entries starting with HRALX
HRALX-HRAC WITH VALUE 'X'.
HRALX-OBPON WITH VALUE 'ON'.
HRALX-PBPON u2018ONu2019.
HRALX-MSGRE u2013 u20180u2019.
9.3) If entries are not found create it.
10) Generate Business partner screens
10.1) Go to transaction BUSP.
10.2) Execute the report with the following parameters
CLIENT - Client in which business partners should be created (solution manager client)
APPLICATION OBJECT-
SCREEN - *
Generate all/ selected screens - All screens.
delete sub screen containers -
11) implement SAP note 450640.
11.1) Go to transaction SA38 and select the report CRM_MKTBP_ZCACL_UPDATE_30.
11.2) Execute it with test mode box unchecked.
If a new relationship is to be created then steps 12 and 13 has to be followed
12) To create a relationship category
12.1) Go to transaction BUBA
12.2) Select the entry CRMH00: Undefined relationship
12.3) click on copy
12.4) Rename CRMH00 to ZCRMH00.
12.5) CREATE A RELATIONSHIP CATEGORY.
IN GENERAL DATA FILL LIKE ' FROM BP1 : HAS THE ACTIVITY GROUP '.
' FROM BP2 : IS A PART OF ATTUNE
13) Add the relationship category to the support team partner function
13.1)Use SPRO
IMG GUIDE->SAP SOLUTION MANAGER->SCENARIO SPECIFIC SETTINGS->
-> SERVICE DESK->PARTNER DETERMINATION PROCEDURE->DEFINE PARTNER FUNCTION.
13.2) FIND THE PARTNER FUNCTION SLFN0003 (SUPPORT TEAM).
13.3) In the field relation ship category, Select the newly created relationship category and save.
14) Steps 12 and 13 should be repeated for various business partner types like sold-to-party, message processors if new relationship is to be created for the respective business partner types.
15) Create a new access sequence for the support team determination
15.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Configuration ->
-> Scenario Specific Settings ->Service Desk -> Partner Determination Procedure ->
->Define Access Sequence
15.2) Click on New Entries
15.3) Define a new access sequence with sequence name as u2018Z001u2019 and description u2018NEW BP RELATIONSHIP ACTIVITY GROUPu2019
15.4) Create an new Individual Access with the following value:
u2022 Batch Seq: 10
u2022 Dialog Seq : 10
u2022 Source : Business Partner Relationship.
u2022 Detail on the source:
u2022 Partner Function : Reported By (CRM)
u2022 Mapping/restrictions
u2022 Flag Mapping/definition for partner being Searched
u2022 Partner Function in Source: Support Team (CRM).
Save it.
This Access Sequence will give us the Partner which has the relationship assigned
to the Support Team in the Reported By partner data.
16) Adapt the partner determination schema/Function
16.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide ->
SAP Solution Manager -> Scenario Specific Settings ->Service Desk ->
-> Partner Determination Procedure -> Define Partner Determination Procedure.
16.2) The two options to adapt partner determination schema are
16.21) Adapt the standard Procedure (SLFN0001) or to create a new one by copying the standard one.
16.22) select the line starting with SLFN0001 or the newly created procedure.
16.23) Double Click on Partner Function in Procedure.
16.24) Select the Partner Function "Support Team", and click Details.
16.25) in the detail view only change the Partner Determination/access Sequence to
the one we've just created. Save your entry.
17) Create a root organizational model.
17.1) Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration-> Scenario Specific Settings ->Service Desk -> Organizational Model ->Create a Root Unit for Your Organizational Structure.
17.2) creating an organizational unit by entering the data in the BASIC DATA tab.
17.3) enter the organizational unit, the description and save it.
18) Create the support team organization
18.1) go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Scenario Specific Settings ->Service Desk -> Create Organizational Objects in the Organizational Structure. Or use transaction (PPOMA_CRM).
19) Create the business Partners.
19. 1) Key users- End user (Business Partner General) ,Address should be specified.
19.2) go to the transaction BP.
19.3) create a new Person, Select the role: Business Partner (Gen).
For Identification of the key user
19.31) click on the identification tab
19.32) enter a line in the identification number formatted as follows
IDTYPE : CRM001.
Identification number : <SID><INSTALL NUMBERS><CLIENT><USERNAME>
eg: USER NAME : USER1.
CLIENT : 100.
SID : ER1.
INSTALL NUMBER : 123456789.
IDENTIFICATION NUMBER : ER1 123456789 100 USER1.
20) Message Processors- Support Team members .
20.1) they should be created first as the users in the corresponding client of the solution manager.
20.2) As business partners they will have the role 'EMPLOYEE'.
20.3) Go to transaction BP .
20.4) Create New Person with the role employee.
20.5) In the Identification tab you should enter the user name in the employee data/User Name.
eg: username: proc1
enter proc1 in the field User name.
21) Organizational Business Partner- Organizational BPS have the same country in there main address tab. They should be created through the organizational model. Business partner corresponding to the root organization have the role 'SOLD TO PARTY'.
22) Assign the business partners (Message Processors) to the previously created support team.
22.1) Go to transaction PPOMA_CRM.
22.2) Select the support team 1.
22.3) Click on create
22.4) select position
22.5) call it 'MPROC_T1/Message Processors for team 1
22.6) Replicate it for the other support teams.
22.7) Select the position MPROC_T1/Message Processors for team1 and click assign,
choose owner/Business Partner find and select the business partner
22.8) Validate and Save it.
22.9) If the assignment of business partner is not possible then implement the note 1008656
Or 997009
23) Create the iBase component
23.1) IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> iBase -> Initially Create and Assign the Component Systems as iBase Components.
23.2) or use the transaction IB51 to create the installed base.
23.3) it is also possible to create the SOLUTION_MANAGER, select the solution and go to menu Edit -> Initial Data Transfer for iBase.
24)Assign Business Partners to iBase Components
IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Basic Settings
-> SAP Solution Manager System ->ServiceDesk-> iBase -> Assign Business Partners to iBase Components.
*--optional--
If you want to be able to assign the System Administrator: Go to the IMG: SAP Solution Manager Implementation Guide -> Customer Relationship Management -> Basic Function -> Partner Processing -> Define Partner Determination Procedure.
Select the entry "00000032 Installed Base/IBase" and double click on Partner Functions in Procedure.
Then copy the Entry "Contact Person (CRM)" to a new entry with the partner Function "System Administrator (CRM)" , save it.
Go back to transaction IB52, select a component, and Goto -> Partner, you should be able
now to assign the partner Function "System Administrator".
25) Assign the SAP Standard Role to the user. Message Creator should have the role : SAP_SUPPDESK_PROCESS.
26)Define the transaction variant for the message processors
Go to the following IMG Path: SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Configuration -> Scenario Specific Settings ->Service Desk -> General Settings -> Specify User Selection Variant.
Here we will create variants for the central message processing transaction CRM_DNO_MONITOR.so that the user will have direct access to there dedicated message.
27) Go to transaction PFCG
27.1) Enter the role name as Z_MSG_PROCESSORS and choose single role.
27.2) Give a description Message Processor role and save it.
27.3) Go to the menu tab and choose add report
27.4) select the report type : ABAP Report
27.5) And in the report enter the report name as 'CRM_DNO_SERVICE_MONITOR'.
27.6) Enter the previously created variant.
27.7) flag the skip initial screen box.
27.8) flag the SAPGUI for windows.
27.9) Create a new transaction with tcode starting with Y or Z.
27.10)Display this transaction and check the values at the bottom of the screen
in the subscreen Default Values, you should have the following parameters:
u2022 D_SREPOVARI-REPORT = CRM_DNO_SERVICE_MONITOR
u2022 D_SREPOVARI-VARIANT = MY_TEAM_MSG
u2022 D_SREPOVARI-NOSELSCRN = X
And also all the user should have the correct role. -
Define Service Desk Destination in the Solution Manager System (Dump creen)
hi,
in SPRO when i click on Define Service Desk Destination in the Solution Manager System
i got dump screen with the error below
any help?
Runtime Errors SAPSQL_EMPTY_TABNAME
Except. CX_SY_DYNAMIC_OSQL_SYNTAX
Date and Time 13.07.2008 14:05:57
Short text
A dynamically specified FROM clause has an unexpected format.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSHI2" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SYNTAX', was not
caught in
procedure "STREE_READ_NODE_GENER" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The running ABAP program attempted to execute an Open SQL statement in
which a FROM clause was specified dynamically in the field "TABLE_NAME". In
this
FROM clause, either a table name after a join operator is missing, or an
alias name after the key name "AS". The field "TABLE_NAME" could be empty as
well.
regardsHi,
I am facing the same problem. What is SP15 ?
Is there any SAP Note that can be applied to correct this ?
Thanks. -
Implementing the Enterprise Support in Solution Manager
Hi Experts,
Can anybody tell me what are the pre requisites to implement Enterprise support in solution manager?
Also let me know what are steps involved in implementing the enterprise support.
Thanks in Advance
HariHello Hari,
In order to implement Enterprise Support your organization should registered as a Value Added Reseller(VAR) with SAP. You can get all the required documentation under https://websmp104.sap-ag.de/solutionmanager --> Information for VARs, ASPs and AHPs which is in the left hand side of the page. However, you need to have a S-user ID of the VAR.
The following are the steps need to perform in implementing the Enterprise Support firmly known as Service Desk for VARs.
1. SAP Solution Manager basic settings (IMG)
a) Initial Configuration Part I
b) Maintain Profile Parameters
c) Maintain Logical Systems
d) Maintain SAP Customer Numbers
e) Initial Configuration Part II
1) Activate BC Set
a) Activate Service Desk BC Set
b) Activate Issue Monitoring BC set
c) Set-up Maintainance optimizer
d) Change online Documentation Settings
e) Activate Solution Manager Services
f) Activate integration with change request Managemnt
g) Define service desk connection in Solution Manager
2)Get components for SAP Service Market place
a) Get SAP Components
3) Get Service Desk Screen Profile
a)generate Business Partener Screen
4)Copy By price list
a)activate Service Desk BC Set
b)Activate Issue Monitoring BC set
c)Set-up Maintainance optimizer
f) Business Add-In for RFC Connections with several SAP customers
g) Business Add-In for RFC Connection of Several SAP Cust. no.
h) Set-Up SAP Support Connection for Customers
i) Assign S-user for SAP Support Portal functionality
j) Schedule Background Jobs
k) Set-Up System Landscape
l) Create Key Users
m) Create Message Processor
2. Multiple SAP Customer Numbers
a) Business Add-In for RFC Connections with several SAP customer numbers
b) Set-Up SAP Support Connection for Customers
3. Data transfer from SAP
a) Data Transfer from SAP
4. Create u201COrganizationu201D Business Partner
5. Service Provider function (IMG)
a) Business Add-In for RFC Connections with several SAP customer numbers
b) Business Add-In for Text Authorization Check
c) Activate BC Set for Service Provider
d) Activate Text Types
e) Adjust Service Desk Roles for Service Provider Menu
6. Service Provider: Value-Added Reseller (VAR)
a) Business Add-In to Process Actions (Post-Processing Framework)
b) Activate BC Sets for Configuration
c) Create Hierarchy and Product Category
d) Set-Up Subcategories
e) Create Business Partner as Person Automatically
f) Set-Up Automatic Confirmation of Messages
g) Maintain Business Partner Call Times
h) Set-Up Incident Management Work Center
7. Work Center (Web UI)
a) Activate Solution Manager Services
b) Assign Work Center Roles to Users
Hope it helps.
Regards,
Satish. -
Install Solution Manager in RedHat Enterprise 6 with Oracle 11
Hello ,
In the marketplace-PAM, RedHat Enterprise 6 is not listed as approved for EHP1 Solution Manager 7.0 64 bit (unicode) with Oracle.
Does anyone have any information on this subject?
Has anyone installed the Solution Manager 7.0/Oracle with RedHat Enterprise 6?
tksYes, you are correct. Apart from PAM, following Note confirms this. RHEL 6 is not supported yet for Oracle, is in planning stage.
Note 1565179 - SAP software and Oracle Linux
Thanks -
System landcape in large enterprise with solution manager
Dear Guru,
Do you have any ideas of how to set up Solution Manager in a big national enterprise? Let's suppose
a big company has a headquarter and serveral branches.
Every branch has its ERP, BW, etc, do you think it is better to set up respective Solution Manager system
for each branch or just create a powerful one centrally in the headquarter. Of course the latter means
less management but more authorization seperation related actions.
Is there any recommendation for this situation? Your opinion and insight is highly appreciated.
Thanks
RayDear Gugu,
I know Solution Manager support some scenarios for multiple customer .e.g VAR in service desk.
But is it possible for hide solution or project infomation, especially content of respective business blueprint
to different customers?
I mean we want to use one single Solution Manager for multiple customers, but customers do not want their
owned document and business process information shared with other customers.
e.g. one customer log on to SOLMAN, then he could view project or solution information of other customer,
furthermore, he could also build up his business blueprint referring to other customer's business blueprint.
Is it possible to segregate this infomation?
Thanks a lot.
Ray -
Logical systems while implementing charm in solution manager
Hello Everybody,
I just wanted to know how many logical systems we need while implementing charm in solution manager 7.0. I have 3 clients in development , 3 clients in Quality and 1 client in production.
Thank you,
vikram.Hi Vikram,
Yes, i1n ChaRM we always work with logical systems, I mean clients.
The standard is:
DEV -> QAS -> PRD
However, you can also use:
- Minimum
DEV -> PRD
- Target groups
DEV -> QAS -> PRD
- > TST
DEV -> QA1 -> QA2 -> PRD
DEV -> QA1 -> PR1
-> QA2 -> PR2
There are a lot of combination possible.
BR
Fernando -
XI 3.0 and BW 3.5 system type/logical component in Solution Manager
We are in the process of performing an upgrade for ERP 2004, XI 3.0 and BW 3.5. Initially this is being done in the sandpits. All systems are configured and connected our Solution Manager to download the packages.
We are unable to determine what type of system the XI 3.0 and BW 3.5 should be configured under. For example, previously we had an issue where ERP was configured as ECC 5.0 rather than ERP 2004. This was causing an issue in MOPZ where the upgrade option wasn't visible in a maintenance transaction. The same issue is now happening for XI and BW.
Please advise on the system type (logical component to use) for XI 3.0 and BW 3.5 in Solution Manager as SAP have made it very confusing. Currently both are under type Netweaver 04.
Regards,
-RohanHi
I believe that SAP hasn't upgrade option for BW 3.5, Check link:
https://service.sap.com/solman-mopz
Upgrade
a "straight" upgrade for SAP Business Suite (upgrade from SAP ERP 2004 to SAP ERP 6.0, for example) is not supported by Maintenance Optimizer
Upgrade with an Installation of an Enhancement Package is supported for SAP ERP, SAP SCM, SAP SRM and SAP CRM
Regards
William Neira -
Using HR data in R/3 to create business partners in Solution Manager
Is it OK for me to setup Solution Manager to automatically download HR data from R/3 to create the Business Partners (employee role) in Solution Manager?
We have setup SAP CRM 4.0 to automatically download the HR data and create Business Partners (employee role) in CRM. Since Solution Manager has the CRM component in it, I assume we can do it as well in Solution Manager.
Regards,
Mel Calucin
Bentley SystemsWe did it, i don't see the problem...
-
SAP GUI 7.10 - Issue reading files from Solution Manager
Hi everyone,
We have just installed SAP GUI 7.10 on our PC and have tried to open documents from Solution Manager.
On both Display and Change mode we are getting "The document cannot be displayed" (SOLAR_DOC021)
Can you suggest anything regarding the source of the problem? Any quick resolution?
Thank you
CorinneFound it myself. Tricky indeed.
http://service.sap.com/patches
- Search for Support Packages and Patches
- Enter Search Term "SAP GUI"
- Select SAP GUI FOR WINDOWS
- Select SAP GUI FOR WINDOWS 7.10 CORE
- Select SAP GUI FOR WINDOWS 7.10 CORE, on the next page also
- Select Win 32
- Arrive at avail. downloads
Regards,
Nathan -
DDIC Password fails in middle of Solution Manager Installation
I'm performing a new install of Solution Manager 7.0 (4.0) on HPUX IA64 11.23. This is a brand new Landscape. The installation has halted at phase 29/47 "Check DDIC password", and reports the error:
Test login to SAP System SMA failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct.
From the SAPGUI 7.10., I was unable to login as DDIC or SAP. I used the master passwords given in the install. I also tried the default passwords as mention in another thread password '19920706' for DDIC and '06071992' for SAP.
I was able to login with SAP* password PASS after adding login/no_automatic_user_sapstar=0
to the default profile and restarting SAP, but was unable to change the DDIC password because change and transport system not configured.
How do I get past this point in the installation process?This problem is now resolved. The problems of:
1) The "Check DDIC password" phase of sapinst of SM 7.0 was failing with DB-Error 0.
Fix: Install latest kernel patch. Problem was fixed with NW 7.0 kernel patch 133. I installed kernel patch 159. The kernel patch had to be installed via the old method of using SAPCAR to untar the files, backup kernel dir, shutdown sap, and copy files over to kernel dir. See note 19466.
2) The Warning messages
WARNING => IcmJ2EEScheduleFunc: Cannot
access "/sap/public/icman" -
please check node in TA sicf [icxxman_mt.c 2206]
was resolved by TA SICF by SERVICE HOST -> active
to activate the complete default_host subtree. -
Question for installing Solution Manager & ECC 5.0
Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lotHi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks. -
Solution Manager on Linux x86_64 installation problem
I try to install Solution Manager 4.0 on Linux X86_64 platform. Unfortunately i receive error "the JDK installed in directory /usr/lib/java does not support the 64 bit data model". And there is no J2SDK for Suse linux x86_64 (or at least i can't find it. Please help!!!
OK. I solved the problem by using IBM Java. Also there is an SUSE version of SUN Java 1.4.2 for 64 bit systems.
-
Unable to create tickt in service desk - Solution manage.
Hello,
I have implemented service desk ( Solution manager) and It is working fine for most of the system but i am getting error while creating a ticket in service desk for one system.
Due to some RFC connection problem i have regenerated the RFC ( trusted , Read and TMW) from Solman to Satellite system.
and now I am not bale to create ticket for that system.
Error message :
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Can any body guide me what should be done to resolve the issue.Hi Prakhar,
As i mentioned workcenter is working fine for all other systems. and user have all roles same as in other systems.
BP is created and we are trying to create ticket from Solman itself so there is no point to maintain bCOS_CUST table.
but still we are not able to create ticket only for one system.
Error Message :
Error when processing your request
What has happened?
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cismp_SMP_14 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server cismp_SMP_14 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 011 -u: XABHYABH -l: E -s: SMP -i: cismp_SMP_14 -w: 1 -d: 20091006 -t: 141511 -v: RABAX_STATE -e: SYSTEM_CORE_DUMPED
Regards,
Bhavesh -
Setting up EarlyWatch in Solution manager
Hi Guys
I am trying to configure Early Watch in solution manager(System Id u2013SOL , Installation No - 0020306432) for an satellite system (System Id -DEV u2013Installation No : 0020181089).
I have followed all the configuration steps listed below :
1. Configuration RFCs to market place SAPOSS and to satellite Systems and RFC Back to solution manager. All RFC like SAPOSS and Back has been tested from SDCCN (Solution manager and satellite system)
2. Configured SDCCN in solution manager and in satellite system except u201CGenerate Includes for Service data control centeru201D in SPRO of solution manager as this process is getting time out and not letting us to generate all the includes
3. Activated Service data Control center locally and assign solution manager as u2018Master system for allu2019.
4. Activated SDCCN in satellite system(DEV) ,Created Earlywatch Service in Solution manager for DEV system and also created/Started u2018Refresh Sessionu2019 in SDCCN of DEV(Satellite system)
5. This successfully shows me Early watch link in u2018Waitingu2019 Status in solution manager.
6. I click on u2018Start Service Processingu2019 to Schedule/Run u201CSM:EXEC SERVICESu201D background job .
Problem : Background job u201CSM:EXEC SERVICESu201D get cancelled after some time and throws a Dump which is pasted below.
Dump shows that an include u2018/1CAGTF/IF_LOGFUNC_000393u2019 is missing which should have been generated while activating the includes for SDCCN in SPRO of solution manager.
I found includes from u2018/1CAGTF/IF_LOGFUNC_000001u2019 to u2018/1CAGTF/IF_LOGFUNC_000353u2019 in the system as it seems that not all include have been generated .
*Could you please help me to provide some SAP note so that I would be able to generate all the includes . *
DUMP
Runtime Errors SYNTAX_ERROR
Date and Time 24.05.2008 00:01:02
Short text
Syntax error in program "RDSVASAEW_ROOT_____________073 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_ROOT_____________073
" in include "RDSVASAEW_ROOT_____________073 " in
line 96:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RDSVASAEW_ROOT_____________073
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
RDSVASAEW_ROOT_____________073 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000393" not found."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "mslsol"
Network address...... "192.168.193.154"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "2x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 10
Shortdump setting.... "full"
Database server... "MSLSOL"
Database type..... "ORACLE"
Database name..... "SOL"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 29 2006 00:18:21"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 29266272
Heap.... 0
Page.... 24576
MM Used. 24845128
MM Free. 236264
User and Transaction
Client.............. 600
User................ "BASISA"
Language key........ "E"
Transaction......... " "
Program............. "SAPLDSVAS_PROC"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLDSVAS_PROC" - in "EXECUTE".
The main program was "RDSMOPBACK_AUTOSESSIONS ".
In the source code you have the termination point in line 2146
of the (Include) program "LDSVAS_PROCCD0".
The program "SAPLDSVAS_PROC" was started as a background job.
Job Name....... "SM:EXEC SERVICES"
Job Initiator.. "BASISA"
Job Number..... 00384300
Source Code Extract
Line
SourceCde
2116
ls_stdparameter-versnr = po_ctnode->versnr.
2117
ls_stdparameter-grp = po_ctnode->grp.
2118
ls_stdparameter-id = po_ctnode->id.
2119
ls_stdparameter-reference_versnr = po_ctnode->reference_versnr.
2120
ls_stdparameter-reference_grp = po_ctnode->reference_grp.
2121
ls_stdparameter-reference_id = po_ctnode->reference_id.
2122
else.
2123
ls_stdparameter-grp = pf_grp.
2124
ls_stdparameter-versnr = pf_versnr.
2125
ls_stdparameter-reference_grp = pf_grp.
2126
ls_stdparameter-reference_versnr = pf_versnr.
2127
endif.
2128
2129
Formroutinen aufrufen
2130
loop at actseq
2131
into ls_actrel
2132
where exec_time = pf_exec_time.
2133
check ls_actrel-exec_time ne gf_exec_time_event
2134
or ( ls_actrel-exec_time = gf_exec_time_event and
2135
ls_actrel-event = pf_event ).
2136
call function 'DSVAS_CDMNT_FORM_NAME'
2137
exporting
2138
pf_container_type = 'A'
2139
pf_form_number = ls_actrel-action
2140
importing
2141
pf_form_name = lf_form_name.
2142
perform (lf_form_name)
2143
in program (program)
2144
using ls_stdparameter
2145
if found.
>>>>>
endloop.
2147
endmethod. "execute
2148
2149
Collect_Known_Events
2150
method collect_known_events.
2151
data: ls_actseq type line of ltype_action_sequence_table,
2152
lf_event type dsvasactseq-event.
2153
2154
loop at actseq into ls_actseq
2155
where ( exec_time = gf_exec_time_event and
2156
event ne space )
2157
or exec_time = gf_exec_time_1
2158
or exec_time = gf_exec_time_2
2159
or exec_time = gf_exec_time_3
2160
or exec_time = gf_exec_time_modus_close.
2161
if ls_actseq-exec_time = gf_exec_time_event.
2162
read table pt_events with table key table_line = ls_actseq-event
2163
transporting no fields.
2164
if sy-subrc ne 0.
2165
insert ls_actseq-event into table pt_events.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
30
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
DSWP: Execute rule set
SY-MSGTY
E
SY-MSGID
FL
SY-MSGNO
046
SY-MSGV1
DSVAS_TOOLS_PACKAGE_GET
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20080524
SY-UZEIT
000049
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
11 FORM SAPLDSVAS_PROC LDSVAS_PROCCD0 2146
EXECUTE
10 METHOD SAPLDSVAS_PROC LDSVAS_PROCCD0 2142
LCL_ACTION_SEQUENCE=>EXECUTE
9 METHOD SAPLDSVAS_PROC LDSVAS_PROCCTI 1741
LCL_CHECK_TREENODE=>EXECUTE
8 METHOD SAPLDSVAS_PROC LDSVAS_PROCCTI 1792
LCL_CHECK_TREENODE=>EXECUTE_AND_PROPAGATE
7 METHOD SAPLDSVAS_PROC LDSVAS_PROCCTI 1806
LCL_CHECK_TREENODE=>EXECUTE_AND_PROPAGATE
6 METHOD SAPLDSVAS_PROC LDSVAS_PROCSEI 2025
LCL_SESSION=>EXECUTE
5 METHOD SAPLDSVAS_PROC LDSVAS_PROCSEI 1582
LCL_SESSION=>CONTEXT_INSTANCES_CREATE
4 METHOD SAPLDSVAS_PROC LDSVAS_PROCSEI 1995
LCL_SESSION=>EXECUTE
3 FUNCTION SAPLDSVAS_PROC LDSVAS_PROCU02 303
DSVAS_PROC_SESSION_OPEN
2 METHOD CL_DSMOP_SOLUTION=============CP CL_DSMOP_SOLUTION=============CM01P 184
CL_DSMOP_SOLUTION=>START_PERIODIC_SERVICES
1 EVENT RDSMOPBACK_AUTOSESSIONS RDSMOPBACK_AUTOSESSIONS 72
START-OF-SELECTION
Chosen variables
Name
Val.
No. 11 Ty. FORM
Name EXECUTE
PF_EXEC_TIME
I
4
9
0
0
PF_EVENT
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PO_CTNODE
|
| 2000D000 |
| E0001C00 |
| PF_GRP |
| |
| 22222222222222222222 |
| 00000000000000000000 |
| 00000000000000000000 |
| 00000000000000000000 |
| PF_VERSNR |
| 00000 |
| 33333 |
| 00000 |
| 00000 |
| 00000 |
| <%_L02E>-EXEC_TIME |
| ??? |
| ?????? |
| ?????? |
| <%_L02F> |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| LS_ACTREL-EXEC_TIME |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| GF_EXEC_TIME_EVENT |
| E |
| 4 |
| 5 |
| 0 |
| 0 |
| SYST-REPID |
| SAPLDSVAS_PROC |
| 5454455455554422222222222222222222222222 |
| 310C43613F02F300000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| LS_ACTREL-EVENT |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| SY-SAPRL+0(4) |
| 70 |
| 33 |
| 70 |
| 00 |
| 00 |
| LS_ACTREL-ACTION |
| 108 |
| 333 |
| 108 |
| 000 |
| 000 |
| LF_FORM_NAME |
| ACTION_108 |
| 44544453332222222222222222222222 |
| 1349FEF1080000000000000000000000 |
| 00000000000000000000000000000000 |
| 00000000000000000000000000000000 |
| ME->PROGRAM |
| RDSVASAEW_ROOT_____________073 |
| 5455454455544555555555555553332222222222 |
| 243613157F2FF4FFFFFFFFFFFFF0730000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| LS_STDPARAMETER |
| EA6000000000255###ESESSION 00047EA_ROOT |
| 4433333333333330004545544422222222222222222222222222222222222222222223333344554452222222222222 |
| 516000000000255010535339FE00000000000000000000000000000000000000000000004751F2FF40000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| No. 10 Ty. METHOD |
| Name LCL_ACTION_SEQUENCE=>EXECUTE |
| PF_EXEC_TIME |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| PF_EVENT |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| PO_CTNODE |
|
2000D000
E0001C00
PF_GRP
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
PF_VERSNR
00000
33333
00000
00000
00000
<%_L02E>-EXEC_TIME
<%_L02F>
I
4
9
0
0
LS_ACTREL-EXEC_TIME
I
4
9
0
0
LS_ACTREL-EVENT
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LS_ACTREL-ACTION
108
333
108
000
000
LF_FORM_NAME
ACTION_108
44544453332222222222222222222222
1349FEF1080000000000000000000000
00000000000000000000000000000000
00000000000000000000000000000000
ME->PROGRAM
RDSVASAEW_ROOT_____________073
5455454455544555555555555553332222222222
243613157F2FF4FFFFFFFFFFFFF0730000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LS_STDPARAMETER
EA6000000000255###ESESSION 00047EA_ROOT
4433333333333330004545544422222222222222222222222222222222222222222223333344554452222222222222
516000000000255010535339FE00000000000000000000000000000000000000000000004751F2FF40000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. METHOD
Name LCL_CHECK_TREENODE=>EXECUTE
PF_EXEC_TIME
I
4
9
0
0
PF_EVENT
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GF_EXEC_TIME_ATTRIBUTES
a
6
1
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME
|
| 2000D000 |
| E0001C00 |
| GT_OPEN_SESSIONS |
| Table IT_3668[1x44] |
| FUNCTION-POOL=DSVAS_PROCDATA=GT_OPEN_SESSIONS |
| Table reference: 1911 |
| TABH+ 0(20) = 807E0D3E000000000000000077070000540E0000 |
| TABH+ 20(20) = 010000002C000000FFFFFFFF0417010010040000 |
| TABH+ 40( 8) = 10000000A4318001 |
| store = 0x807E0D3E |
| ext1 = 0x00000000 |
| shmId = 0 (0x00000000) |
| id = 1911 (0x77070000) |
| label = 3668 (0x540E0000) |
| fill = 1 (0x01000000) |
| leng = 44 (0x2C000000) |
| loop = -1 (0xFFFFFFFF) |
| xtyp = TYPE#000007 |
| occu = 16 (0x10000000) |
| access = 4 (ItAccessHashed) |
| idxKind = 0 (ItIndexNone) |
| uniKind = 1 (ItUnique) |
| keyKind = 3 (user defined) |
| cmpMode = 8 (cmpManyEq) |
| occu0 = 1 |
| groupCntl = 0 |
| rfc = 0 |
| unShareable = 0 |
| mightBeShared = 0 |
| sharedWithShmTab = 0 |
| isShmLockId = 0 |
| gcKind = 0 |
| isUsed = 1 |
| isCtfyAble = 1 |
| >>>>> Shareable Table Header Data <<<<< |
| tabi = 0xC0AB0D3E |
| pgHook = 0x00000000 |
| idxPtr = 0x78F10D3E |
| shmTabhSet = 0x00000000 |
| id = 2504 (0xC8090000) |
| refCount = 0 (0x00000000) |
| tstRefCount = 0 (0x00000000) |
| lineAdmin = 16 (0x10000000) |
| lineAlloc = 16 (0x10000000) |
| shmVersId = 0 (0x00000000) |
| shmRefCount = 1 (0x01000000) |
| >>>>> 1st level extension part <<<<< |
| regHook = Not allocated |
| collHook = Not allocated |
| ext2 = Not allocated |
| >>>>> 2nd level extension part <<<<< |
| tabhBack = Not allocated |
| delta_head = Not allocated |
| pb_func = Not allocated |
| pb_handle = Not allocated |
| GF_EXEC_TIME_BEFORE_REPORT_GEN |
| R |
| 5 |
| 2 |
| 0 |
| 0 |
| GF_EXEC_TIME_INIT |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| ME->INITIALIZED |
| |
| 2 |
| 0 |
| 0 |
| 0 |
| GF_EXEC_TIME_AFTER |
| A |
| 4 |
| 1 |
| 0 |
| 0 |
| ME->ACTSEQ |
|
2000D000
C0003C00
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ME->HAS_TABLES
X
5
8
0
0
SYST
##########################A###P##############################################T###ÿ##### u####
0000000000000000000000100040005000000050000000007000000000000000000000000000105000F00050270000
1000101000001000000000E010101000000000C0000000004000000000000000000000000000604000F00080050600
0000000000000000000000000000000000000000000000001000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000070000000000000000000000000000000000000D000000C
SY-REPID
SAPLDSVAS_PROC
5454455455554422222222222222222222222222
310C43613F02F300000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->CHECK_TABLES
|
| 2000D000 |
| 3000CC00 |
| No. 8 Ty. METHOD |
| Name LCL_CHECK_TREENODE=>EXECUTE_AND_PROPAGATE |
| PF_EXEC_TIME |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| PF_EVENT |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| PF_CON |
| SESSION |
| 5455444222 |
| 35339FE000 |
| 0000000000 |
| 0000000000 |
| PF_INS |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| ME->DYNAMIC |
| X |
| 5 |
| 8 |
| 0 |
| 0 |
| ME |
|
2000D000
E0001C00
GF_SESSION_DEF_TYPE_MORE_DEV
L
4
C
0
0
ME->ACTIVE
X
5
8
0
0
GF_SESSION_DEF_TYPE_VERSION
V
5
6
0
0
ME->CON
SESSION
5455444222
35339FE000
0000000000
0000000000
ME->INS
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->CHILD_CONDSEQ
F0000000
F0000000
GF_CONTEXT_SESSION
SESSION
5455444222
35339FE000
0000000000
0000000000
ME->CHILDREN
Table[initial]
LO_TNODE
|
| F0000000 |
| F0000000 |
| %_ARCHIVE |
| |
| 2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| No. 7 Ty. METHOD |
| Name LCL_CHECK_TREENODE=>EXECUTE_AND_PROPAGATE |
| PF_EXEC_TIME |
| I |
| 4 |
| 9 |
| 0 |
| 0 |
| PF_EVENT |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| PF_CON |
| SESSION |
| 5455444222 |
| 35339FE000 |
| 0000000000 |
| 0000000000 |
| PF_INS |
| |
| 2222222222222222222222222222222222222222 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| ME |
|
2000D000
F0000C00
ME->CHILD_CONDSEQ
|
| F0000000 |
| F0000000 |
| ME->CHILDREN |
| Table IT_3674[26x8] |
| DATA=CHILDREN
Table reference: 1919
TABH+ 0(20) = 68550D3E00000000000000007F0700005A0E0000
TABH+ 20(20) = 1A00000008000000800100000417010030080000
TABH+ 40( 8) = 10000000C1288001
store = 0x68550D3E
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 1919 (0x7F070000)
label = 3674 (0x5A0E0000)
fill = 26 (0x1A000000)
leng = 8 (0x08000000)
loop = 384 (0x80010000)
xtyp = TYPE#000029
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 4 (cmpSingleEq)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xB0B10D3E
pgHook = 0xF0882E3E
idxPtr = 0x00000000
shmTabhSet = 0x00000000
id = 2508 (0xCC090000)
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 48 (0x30000000)
lineAlloc = 48 (0x30000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
collHook = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LO_TNODE
|
| 2000D000 |
| E0001C00 |
| LO_CTNODE |
|
2000D000
E0001C00
%_SPACE
2
0
0
0
No. 6 Ty. METHOD
Name LCL_SESSION=>EXECUTE
PF_EXEC_TIME
I
4
9
0
0
PF_EVENT
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PF_CON
SESSION
5455444222
35339FE000
0000000000
0000000000
PF_INS
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->ACTSEQ
|
| F0000000 |
| F0000000 |
| ME->GLOBAL_CHECK_GRP |
| EA_ROOT |
| 44554452222222222222 |
| 51F2FF40000000000000 |
| 00000000000000000000 |
| 00000000000000000000 |
| ME->GLOBAL_VERSNR |
| 00047 |
| 33333 |
| 00047 |
| 00000 |
| 00000 |
| ME->CHECK_TREE |
|
2000D000
F0000C00
GF_EXEC_TIME_MODUS_CLOSE
W
5
7
0
0
ME->RAISED_EVENTS
Table[initial]
GF_EXEC_TIME_LOGICAL_COMPLETE
L
4
C
0
0
No. 5 Ty. METHOD
Name LCL_SESSION=>CONTEXT_INSTANCES_CREATE
LT_ZOMBIES
Table[initial]
LS_CTREL-TREENODE
F0000000
F0000000
LO_ZOMBIE
|
| F0000000 |
| F0000000 |
| LT_NEW_CONINS |
| Table IT_3670[1x100] |
| FUNCTION-POOL=DSVAS_PROCCLASS=LCL_SESSIONMETHOD=CONTEXT_INSTANCES_CREATEDATA=LT_NEW_CONINS |
| Table reference: 1920 |
| TABH+ 0(20) = 90C50D3E30F3DE3D0000000080070000560E0000 |
| TABH+ 20(20) = 0100000064000000080100000417010060140000 |
| TABH+ 40( 8) = 01000000C1248401 |
| store = 0x90C50D3E |
| ext1 = 0x30F3DE3D |
| shmId = 0 (0x00000000) |
| id = 1920 (0x80070000) |
| label = 3670 (0x560E0000) |
| fill = 1 (0x01000000) |
| leng = 100 (0x64000000) |
| loop = 264 (0x08010000) |
| xtyp = TYPE#000094 |
| occu = 1 (0x01000000) |
| access = 1 (ItAccessStandard) |
| idxKind = 0 (ItIndexNone) |
| uniKind = 2 (ItUniqueNon) |
| keyKind = 1 (default) |
| cmpMode = 2 (cmpSingleMcmpR) |
| occu0 = 1 |
| groupCntl = 0 |
| rfc = 0 |
| unShareable = 0 |
| mightBeShared = 1 |
| sharedWithShmTab = 0 |
| isShmLockId = 0 |
| gcKind = 0 |
| isUsed = 1 |
| isCtfyAble = 1 |
| >>>>> Shareable Table Header Data <<<<< |
| tabi = 0x08AB0D3E |
| pgHook = 0x00000000 |
| idxPtr = 0x00000000 |
| shmTabhSet = 0x00000000 |
| id = 2505 (0xC9090000) |
| refCount = 0 (0x00000000) |
| tstRefCount = 0 (0x00000000) |
| lineAdmin = 1 (0x01000000) |
| lineAlloc = 1 (0x01000000) |
| shmVersId = 0 (0x00000000) |
| shmRefCount = 1 (0x01000000) |
| >>>>> 1st level extension part <<<<< |
| regHook = 0xB0F0BE3D |
| collHook = 0x00000000 |
| ext2 = 0x00000000 |
| >>>>> 2nd level extension part <<<<< |
| tabhBack = Not allocated |
| delta_head = Not allocated |
| pb_func = Not allocated |
| pb_handle = Not allocated |
| <LFS_CONINS> |
| SESSION |
| 54554442222222222222222222222222222222222222222222 |
| 35339FE0000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| 00000000000000000000000000000000000000000000000000 |
| ME |
|
90006000
4000B000
<LFS_CONINS>-CON
SESSION
5455444222
35339FE000
0000000000
0000000000
<LFS_CONINS>-INS
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY
##########################A###P##############################################T###ÿ##### u####
0000000000000000000000100040005000000050000000007000000000000000000000000000105000F00050270000
1000101000001000000000E010101000000000C0000000004000000000000000000000000000604000F00080050600
0000000000000000000000000000000000000000000000001000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000070000000000000000000000000000000000000D000000C
GF_EXEC_TIME_BEFORE
B
4
2
0
0
No. 4 Ty. METHOD
Name LCL_SESSION=>EXECUTE
PF_EXEC_TIME
I
4
9
0
0
PF_EVENT
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PF_CON
2222222222
0000000000
0000000000
0000000000
PF_INS
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ME->ACTSEQ
|
| F0000000 |
| F0000000 |
| ME |
|
90006000
4000B000
ME->LOGICAL_COMPLETE
2
0
0
0
GF_EXEC_TIME_COMPLETE
C
4
3
0
0
ME->COMPLETE
2
0
0
0
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
No. 3 Ty. FUNCTION
Name DSVAS_PROC_SESSION_OPEN
PF_HANDLE_TO_USE
0
0000
0000
PF_MAX_TREE
2
0
0
0
PF_MODE
C
4
3
0
0
PS_SESSION_NUMBER
EA6000000000255
443333333333333
516000000000255
000000000000000
000000000000000
PF_HANDLE
1
0000
1000
PF_HIDE_TREE
2
0
0
0
PF_MODE_USED
2
0
0
0
PF_NEXT_CHECK_GRP
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
PF_NEXT_CHECK_ID
00000
33333
00000
00000
00000
PF_NEXT_CON
2222222222
0000000000
0000000000
0000000000
PF_NEXT_INS
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
PT_ERRORS
Table[initial]
PT_FRONTEND_TREE[]
Table[initial]
PF_LANGUAGE
E
4
5
0
0
<%_TABLE_DSVASSESSADMIN>
LF_BUNDLE_VERSNR
00038
33333
00038
00000
00000
DSVASRESULTSGEN-CLUSTR
0
00
00
PS_SESSION_NUMBER-SESSNO
6000000000255
3333333333333
6000000000255
0000000000000
0000000000000
LS_OPEN_SESSIONS-SESSION
|
| 90006000 |
| 4000B000 |
| LO_SESSION |
|
90006000
4000B000
LS_OPEN_SESSIONS
EA6000000000255C####k#
4433333333333334009060
51600000000025531040B0
0000000000000000000000
0000000000000000000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LS_SESSDEFGEN-MULTI_USERPlease replace the Service Definitions in your SAP Solution Manager
system as described in SAP Note 727998.
As of SAP Solution Manager 7.0 (= 4.0) Support Package Stack 15 (which
includes ST-PI 700_2005_1 SP06) you can trigger the required steps
within transaction SDCCN:
Menu Utilities -> Maintain Service Definitions ->
Select 'Delete and Replace Service Definitions -> Confirm this
selection-> Confirm that you want to delete the definitions -> Confirm
that a new task 'Service Definition Refresh' was created
Take a note of the task id -> Review the log for this task id when it
is completed. You should not see any errors for either the update
of a Service Definitions table or the generation of any re-import
include.
Reschedule SM:EXEC SERVICES and the reported dump will no longer
occur. -
Problem with BI activation in Solution Manager
Hello SAP experts.
I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
The customizing in client 010 is ok. I have BW client 001. RFC connections
are ok. After activation of BW content in workcenter only new job in sm37
has been planned but the button Status Report has not appeared. I installed
newest add-on SAPK-70405INBICONT.
Detailed description:
After customizing in:
SPRO-Basic Data-BW Setup
and
SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
The Activation of BW content in transaction solman_workcenter - Test
Management - Settings - BI Reporting Settings the message appears:
"Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
and
"Activation of BI Content for Test Workbench Reporting started".
In test evaluation the button Status report doesnt show. After repeated
activation appears the same message as in beginning: Test Workbench
Reporting - BI Content not active.
Thank youHi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.
Maybe you are looking for
-
Keyboard to find artist no longer working?
Since pretty much the dawn of time, I've been able to, from the "Albums" view in iTunes, type in the first few letters of an artist's name and iTunes would go straight there, to that artist's first album. Ever since updating iTunes a couple of days a
-
Hi Experts, Im using the fm SO_NEW_DOCUMENT_ATT_SEND_API1 to send out a pdf (into sap office box). But when I open it I get totally wrong special characters (Chinese for instance, and ' is replaced by #). I have already applied the note 1430123 but i
-
Need to reinstall QuickTime X - no disk
I have a MacBook that was came with Leopard but now has Snow Leopard; it received a new HD through AppleCare, and was given 10.6.3 during the repair. I was NOT given new install disks. I now need to reinstall QuickTime X, which I (foolishly) deleted
-
Convert while importing?
Is there a way to convert my entire music library while I import it? I can click on the song in Itunes and convert it but then I end up with two of the same song, just diffrent formats. Is there a way to maybe make it delete the first file from Itune
-
Hi there, I'm using the JEditorPane to display some simple html and css - in fact all it is a div of a fixed width containing an abitary amount of text. What I want to do is calculate the height of the div in pixels. In a browser this is easy enough,