BI Statistical data not able to load delta data

Hi Experts,
I am working on BI7.0, we are trying to activate the BI Statistical cubes and load Delta data, so in the process , I did all the steps , activated and initialised the Data sources in BI
0TCT_DS03,0TCT_DS02 to the Cubes0TCT_C02 and 0TCT_C03, My aim is initialise today and load the delta loads from today onwards and I gave init selection on date, as start date today, and I switched on all BI stastical data but my delta records are not coming, I see in RSA7 in my BI system, I did not see my delta getting updated
Please advise how to get this delta records for these Data sources,
Thanks in advance

Hello Dheeraj ,
If delta is showing Zero records then there is no records changes or creation after the Init Run. So do some activities that will be captured in the Stat and then load the delta.
Thanks
Chandran

Similar Messages

Not able to load master data

HI Friends,
I am not able to load data in master data even after deleting the master data. when i am schedule then the data is not even load in PSA , I am using the SRM as source system,
The SRM is refreshed every quater so we need to re load the data from that system.
Can you please suggest how to go about as it is very urgent ,
I have checked that the connection is working fine but there is one short dump that is coming
this is information that st22 is provding
The termination occurred in the ABAP program "SAPLRSS1 " in
"RSM1_CHECK_FOR_DELTAUPD".
The main program was "RSPROCESS ".
The termination occurred in line 1361 of the source code of the (Include)
program "LRSS1F11 "
of the source code of program "LRSS1F11 " (when calling the editor 13610).
The program "SAPLRSS1 " was started as a background job.
Thanks
Raju

Hi Raju,
Very strange to see your dump mesg when you are doing full load.
Are you sure this dump is realted to your load.
Check if your transfer structure is active or try doing following steps:
1. Kill all the jobs runing in BW system.
2. Delete all the data in all the realted data targets and infoobjects.
3. Then try uploading data one by one.
Ans why dont your try uploading data first only to PSA.
Regards,
Rohini

Not Able to Load the data type "Non Currency"in Planning accounts dimension

Dear All,
We are building Meta data in planning using HAL 9.2 ...while construction of accounts we were able to assign "Currency" Data Type ,but were unable to add the "Non Currency" data types to account members.
We have mentioned "Non Currency" in the the Data Type Field.
Thanks in Advance.

Hi Guys my issue is resolved..... just wanted to let you know that you will need to write "Non-Currency" in the field name in the csv for marking accounts as Non currency data type.

DataSource is not able to extract the data

I am trying to extract data from R3. but 2LIS_03_BF DataSource is not able to extract the data, even though Goods is Issued in R/3 and is able to view the issued goods in MB5B report.
Please provide some ideas , on how to resolve this issue.

2LIS_03_BF datasource is the Inventory datasource.1st of all you have to check it in the Delta queue(RSA7) if the Delta is available or not..After that you have check the data in RSA3 transaction.soetimes it happens that the delta data is not showing into the RSA3 transaction.Try to load the data delta load into the BW system.

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

I received a 1st Gen IPad from a supplier as a gift to promote their products. They used their Apple account to load the apps. I am not able to load my own apps because their apple user is the one that pops up. How can I change it to mine?

Set it up as new device, explained in this article, without using the backup afterwards:
How to back up your data and set up as a new device

Camera Raw not able to load lense correction profiles

Hi there,
like the topic says.. I am not able to load lense correction profiles and get always the error message. I have the newest version (Creative Cloud Member) of Photoshop CC 2014 15.2.2 and my Mac OSX is up to date. With older versions (when I start from a backup it is working fine!? So what can I do?! I dont want to run PS from my backup folder.. it hast to work with the actual release as well. I did not change anything.. already tried with uninstalling and reinstalling PS. But it didn´t solve the problem.

Possibly a reset to both Bridge and Camera Raw is in order. First, close Bridge. Now hold Cmd+Opt+Shift as you restart it. A box will appear; Place a check mark on all three options and hit "ok." Now, again, Cmd+Opt+Shift as you "open in Camera Raw."
See is this helps.
Benjamin

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

Iam not able to view preview data under preview tab in BI 7

Dear One's
Can any one kindly reason out the occurance of my problem ?
Iam not able to view preview data under preview tab in BI 7 even the file format is CSV and no. of rows to be ignored is 1 and data separator is "," & escape sign is ";"
The error was some thing like " infoobject MAT_IDMAT_NAME_MAT_TYPE is not corelated"
Though I was given seperated the columns like MAT_ID & MAT_NAME & MAT_TYPE
Thanks in advance,
Raj

Hi Raj,
If it is CSV, you can make corections data source itself.Once you check the fields entered in the data source with your csv file, because there may be some mismatching between the file you loaded and data source.Enter thre fields in data source as per your file.And check the line to be displayed option, when you clicking on preview.
If you still getting problem, let me know.

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

I restored my iPad and then repurchased App Pages. But I am not able to find my data saved with Pages before the restore. qwn

Those sites take a long time to load for me (almost a minute)
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

Not Able to Load the Request in Target DSO

Hi,
we haddone reinitialiazation of the source system.. after that we did Init without data transfer to the target's.
After succesful init,we are doing Full Repiar Request to load the data into the Purchaisn DSO.It has around 15140000 records are there. we are loading targets with particular selection condition.
Now data has extracted from the source system and is there available ib PSA.but while loading to Target its not allowing to load the data in the targets.
We are getting the Folowing Error.
"Full 2,933,864 has overlapping selections with init. 0002933848: No updates into 0PUR_O01"
But we dont have any selection condition for the init load.
suggest me how to approach this issue...

Just a thought - I am not hungry for points.. but for new comer it would matter a lot....you should assign points for relevant reply ..thats way to say thank you here in SDN...
And if your question has been replied..please close the thread by markin it as answered...
Regards
--SA

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to get complete data in Heading of the smarform

Dear Friends,
I am devloping a smartform for my requiremnt, i am not able to get complete data jin Header Window ( i.e the Title Name of the company is not getting fully) when i execute the Smartform ,
Iam able to see only the last few words of the Text. Please help me what i should do in this regard
regards
madhuri

Hi
Also, check where the window is placed in the Form Painter...may be it is not on the page properly..and also check the size of the window..
Further, check the paragraph format that is used.
Regards,
Vishwa.
Edited by: Vishwa Sri Hari on Oct 15, 2008 1:21 PM

BI Statistical data not able to load delta data

Similar Messages

Maybe you are looking for