BI Statistics Datasource 0TCT_DS01
hi all,
this is regarding the datasource 0tct_ds01. I am trying to load the data into datasource 0TCT_DS01. this datasource is based on the FM RSTC_BIRS_OLAP_AGGREGATED_DATA. all the underlying tables for this datasource have data, but the datasource has no data when i check it in RSA3. could anyone help me by throwing some light on this.
thanks in advance!!
cheers
Seems to be a note on the subject : 1323805.
Regards,
Fred
Similar Messages
-
Technical Content (Statistics) DataSources
Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R/3 side and which should be the BW based?
The process chains I mentioned are:
Data Load Statistics - Delta (0TCT_C2_DELTA_P01)
Load Statictics Data (Delta Load) (0TCT_STATISTIC_DELTA_LOAD)
Query Runtime Statistics - Delta (0TCT_C0_DELTA_P01)Hi Erdem,
All the datasources must be from BW itself and not from the R/3 source system. I think what could have happened is that you have the R/3 system chosen as a source system in BI content when you initially activated the stats objects.
Cheers Grant. -
'select content delta' option in bw statistics installation?
What is the significance of 'select content delta'? I am trying to install bw statistics datasources from business content. In the document link given below it is specified to use this option. when I am using that option and trying to install it is displaying that the extract structure of one of the datasource is invalid. The same option can also be seen on the top in RSA5.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
It can be seen in the 43rd page.This option compares datasources from RSA5 (available in content) and RSA6 (already activated in the system) and gives you the delta, i.e, tells us which datasources are not yet activated in the system.
-
BI Statistics - 0TCT ...
ST03 transaction provides system load performance etc. It gets its data from BI Content Statistics. I read documentation on various Technical Content: 0TCT_C01, C02, C03 u2026 etc, cannot figure where this workload information is stored. Appreciate any pointers.
There are several tables that source the BI Statistics DataSources. For the DTP analysis, the source tables are RSDDSTATDTP, RSBKREQUEST, RSBSOURCEPROP and RSBTARGETPROP.
Here's the link on the SAP Help Portal for the BI Statistics content, which provides the source tables for the DataSources: [http://help.sap.com/saphelp_nw70/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm] -
0UC_SALES_STATS_01 DataSource Problem in Extracting
Hi Experts,
I am using 0UC_SALES_STATS_01(Sales Statistics) Datasource,For extracting the 0300(Main Transaction) Manaul Credit Memo/Back billing (Description) field,initially it was hidden and as per the requirement I enabled the checkbox and extracting the data,it is working fine in DEV System,but the same when I am doing in QA System I am not getting the data for the Main Transaction field 0300,i did checked the table from where I getting this Main Transaction,its there aswell,created some manual posting but couldn't reflect in the extraction,please can some expert can help or suggest me what could be wrong.Apart from 0300 I am getting the 0100 and 0200 posting in the Datasource,why I couldn't get the 0300 Manual Credit Memo/Back Billing when I extract the Data.
Please Advice me
Thanks in Advance,
RagaHi Srinivasan,
We are using ISU,and we are not using LO Extraction,it is a standard extractor for Utilities,i did checked rsa3,rsa6 but in delta queue rsa7 I am not getting any records,do you know the process to run any jobs partaining to Sales Statistics Datasource if so please let me know,for the Main Transaction 0300 I am not getting this record at all.
Help me out,
Raga -
Hi,
From whr we need to load the data for the datasource 0TCT_DS01. is thr is any setup table we need to fill.
Regards,
sandeepThis is a BI technical object. No connection to R3..you just need to activate from BI BI Content.
Thanks..
Shambhu -
Dear SDN's,
In BI Statistics we have a cube and virtual provider.
Multiprovider = Cube + Virtual provider.Multiprovider is a combination of cube and virtual provider.
When we load the data in the cube,the data goes to cube & virtual provider and to respective multi provider.
After laoding data in all the cubes,when i execute the report it giving error like
(1) Error reading the data of infoprovider 0TCT_VC01(virtual provider)
(2) System error:Whole number overflow on multiplication
(3) Messages for Datasource 0TCT_DS01 from source system BIP400
(4) Errors occured during parallel processing of query 6,RC:3
(5) Error while reading data;navigation is possible
our report is based on multi provider.
what is the root cause of the erro?
Thanks and Kind Regards,
Lakshman Kumar GHi Lakshman,
Check whether any user exits involved in the Report?
If the user exits are not properly made this error may occur.
one more error may be due to transformations or dtp for that virtual provider may be inactive.
with regards,
Ravi Kanth -
Error in reading data of Virtual Infoprovider 0TCT_VC01
Hi Experts,
I have created a query on Statistics Multiprovider 0TCT_MC01. However, when I am trying to run the query, it gives following error message and does not display data but gives dump:
- Messages for Datasource 0TCT_DS01 from source system
- Syntex error: System error in program CL_RSTCT_BIRS_OLAP_AGGR_EX
- Error Reading the data of Infoprovider 0TCT_VC01
Kindly suggest what could be the issue and the solution for the same.
Thanks & Regards,
Himanshuhi,
You can try running the query in RSRT also check the below thread
"Is This The Party To Whom I Am Speaking?
Thanks, -
Help to find the technical Content
I want to install Technical Content in BI 7.0 system, I ran the job RSTCC_ACTIVATE_ADMIN_COCKPIT and it is running, now after
this what are the steps. I need
1. 0TCT_C01 what is mapping datasource 0tct_ds01 but i do not find this when i go to TR- RSOR in BI Content installation.
I guess it will after the job RSTCC_ACTIVATE_ADMIN_COCKPIT is finished
also i think i have to install the process chains manually in RSOR
Please guide me since I want to see the loading time for all my DTP's and Infopakages can i use
"Runtimes of BI Application Objects" Report, what is OLAP Time is it the the time it took for extarction
Below is my requirement: Please help how to go about this
1. Data Load Time for New GL Model for all IP'S and DTP's per dat loading
2. How Many Users use the New GL report
3. How many infoobject are used in report
Thanks
Poonam RoyHi Poonam Roy,
Whole installation is defined in the note 934848. Once the installation is done you need to schedule the process chains to load the cubes.
Relevant documents:
1004166: Missing documents in help portal for Admin Cockpit
BI Query Runtime Statistics :
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e3807a6df402d3e10000000a1553f7/frameset.htm
Admin Cockpit:
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/08a75d19e32d2fe10000000a11466f/frameset.htm
"Runtimes of BI Application Objects" gives the runtime of the BI application object i.e Workbooks and Templates.
1. Data Load Time for New GL Model for all IP'S and DTP's per dat loading
ANS: Check the queries defined on the cube 0TCT_MC22 & 0TCT_MC23.
2. How Many Users use the New GL report
ANS: Build your our query on the cube 0TCT_MC01 all the relevant information is present there.
Regards,
Srilatha -
Techincal Content Trasport Error
Hi,
We are done Techincal content Installation in BI Dev system trying to move the objects Dev to Q system it causing the error message in Trasport like this "Error when activating DataSource 0TCT_DS01 BICLNTXXX"
ThanksHi,
U have to check whether the object is in active version or not
and include them in the grouping and collection mode and then install them
Pls try the same it will come fine
Settings for material number conversion not found
Assigning Points is the way of saying Thanks in SDN -
hello everyone . thanks for ur help earlier. i have assigned poins too .
i have problem . i have installed bw statistics cubes .i can see them modeling . i went to rsa5 selected tct nd the datasources transfred the datasources . i went to rsa6 and find the datasources are avalible. i have replicated them through ss.when i want to assign a datasource fro the infosource. i cant find the realavent datasources .instead it shows me all the other ds avalible. plz can anyone help me how to assign assign the datasources . how to find the ds for infosources.points will be rewarded. thanks in adavnce to you allHi,
I guess that you have installed statistics cubes from the business content with Grouping option = 'Only necessary objects'. Try to install them again. This time with Grouping = 'In datafow before and afterwards'. It will create infosources which you'll be able to assign to DS.
Best regards,
Eugene -
Where will I specify process chain and query time statistics to be loaded .
I am on BI 7.0. I see on my system, BI Statistics Technical Content has been installed because when I run
RSDDSTAT transaction under Info Provides I see cubes such as 0TCT_C01, oTC_C02, oTCT_C03, oTCT_MC01, 0TCT_VC01..
I also see process chains installed on my system such as oTCT_C2_INIT_P01, oTCT_C2_DELTA_P01.
I see various RSDDSTAT* tables being populated on my system as well.
My questions are:
1. How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
2. Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
3. Does ST03N transaction display data from 2.
THANKS A LOT.Hi,
1. How does data gets populated in 0TCT_C01, C02 etc? Is it by scheduling TC process chains or there are other means?
You can find the DataSource in RSA1. For example, 0TCT_C01 is updated from 0TCT_DS01. And you need to schedule process chain 0TCT_C0_DELTA_P01 for query statistics and 0TCT_C2_DELTA_P01 for data load statistics on a regular basis. Of course, as they are delta chains, you need to first run initializaiton chains for just one time before scheduling delta chains. The initialization chains are 0TCT_C0_INIT_P01 and 0TCT_C2_INIT_P01.
2. Where does one specify what kind of statistics will be copied from RSDDSTAT* tables. My IT lead tells me that process chain statistics are not being collected. I also thing query times are not being populated in 0TCT tables. Where can I specify what should be loaded in these cubes.
As I know, the statistics data are first stored in RSDDSTAT* tables. For example, query data are stored in RSDDSTAT_OLAP. And the data are loaded to corresponding cubes when you executing InfoPackages.
You can refer to this link and search "Recording BI Statistics" in this page:
http://help.sap.com/saphelp_nw70/helpdata/en/44/3521c7bae848a1e10000000a114a6b/content.htm
3. Does ST03N transaction display data from 2.
Yes. If BI Statistics content are not activate you would be unable to view statistics data in ST03N.
Let us know if you have other questions.
Regards,
Frank -
Problem in Dataload for Statistics Infocube
Hi,
We are installing BI Statistics Infocubes (0TCT_C01) in our BID, BIT & BIP systems respectively and running the Statistics Query (ZTCT_C01_MQ_01) to track the Performance. The Infocubes were successfully loaded with data in BID & BIT systems and we also ran the Query in both the systems. In the middle, We recently refreshed our BI Quality system (BIT system) with a copy of the BI Production system (BIP system). After refreshing, the Infopackages created in BIT system for loading Statistics no longer exists. We created Infopackages again and tried loading the data but the dataload fails giving a Short dump. Please find the short dump below:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
caught in procedure "GET_MD_TIMESTAMP" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
Parameter has invalid value: Parameter SYST_DATE/SYST_TIME has invalid value
00000000/000000.
From the Short dump, it seems the dataload failures is due to the problem in Time stamp & date variation. We checked the system date and time and is showing the correct value only. We are confused on what could be the problem. Is there any specific OSS Note to solve this issue?
Your help is highly appreciated.
Thanks,
MuraliHi Daya,
Thanks for your time.
I tried the step. I gave the Source system name as {"BITCLNT001" & Datasource name as "0TCT_DS01", i am getting a pop-up message "There is no Datasource with these attributes".
The Datasource name is correct only, i am not sure why this pop message is displayed.
Regards,
Murali -
Hi All,
While activating an ODS object, I got the error The creation of the export datasource failed. I tried activating the entire source system and replicated it. But still I am facing this issue. I checked the ODS in RSRV also. There it gave me the error Number of rows for active program and temporary program are different". I am facing this issue for newly created ODS objects also.
Can someone throw some light on this?
Thanks in advance,
FebinaHi Febina Mohanan
Welcome to the board..
There are few considerations with your issue
1)Occured Because of Space issue Just check the space statistics in DB02 with the help of BASIS
2) Connectivity..
3) Just try in rsa1 Settings--->display Generated Objects >selct show generated objects->Continue..
4) Activate u r ds with the programe "RS_TRANSTRU_ACTIVATE_ALL"
Hope this will help...
Regards
R M K
Assining points is the only way of saying thanx in SDN *** -
Error while activating BI statistics Process Chain
Hi,
I have faced the problem below. Please advise.
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
Thi
go to table RSLDPIOSH enter the infopackage technical name you have mentionned.
take note of the OLTPSOURCE name
then go to rsds replicate and activate.
After that take the technical names of the process chains go to business content installation and reactivate theses chains (with option only necessary objects)
This will solve you issue
The reason of your error is the following, some master data datasources from the bi statistics business content is delivered in 3.x and some other with 7 therefore you have a mix up with the dataflows.
bye
Boujema
Maybe you are looking for
-
Error when trying to sign a .apk file
I am having a problem with signing my unsigned .apk file. When ever I try to enter this command "`jarsigner –verbose –sigalg MD5withRSA –digestalg SHA1 –keystore my-release-key.keystore AmazonInAppSample-release-unsigned.apk alias_name`" I get this e
-
When I open iTunes on my iPad and tap on purchased for music, the timer just goes round and round and won't find my purchased tunes and I can't therefore download any new items I have bought. Any suggestions on how to reload the software?
-
HT204088 I have been charged twice for a single transaction
Hi I have been charged twice for an App I downloaded yesterday Item Developer Type Unit Price Auto Trader Mobile, Vehicle Check Report a Problem Auto Trader In App Purchase £3.99 Auto Trader Mobile, Vehicle Check Report a Problem Auto Trader In App
-
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset S
-
Some days ago i bought a Zen Nano Plus. I am very happy with the player but i have one question. I cant find out how to choose a song, scrolling through folders that is. Is it not possible?