BI statistics doubts? (banu ravi ple solve)

hi friends,
how are you, in RSA1 tools-settings for db statistics.
there i selected my cube and delete statical data and i checked chek box statistics ON and OLAP for ALL.
now i run query
now i went ST03 expert mode, BI load i didnt find MY cube statistics, ple let me know solution.
in 3.5 i selected my cube and olap and wm checked and delet old data and run query, in st03 i got my results. ple let me know what is my mistake in 7.0?
regards
ss

Hi Suneel
In BI 7.0 the statistics are collected and filled in to several Infocubes, which you can see with a single report or with ST03N.
In this case, you should perform some steps in order to activate some objects like, infoobjects, cubes, proc chain and other things. After that you will see all of your statistics in the ST03N transaction.
If you want, I can help you with those steps.
Hope this help you.

Similar Messages

Restore windows is the headline.the application "finder" unexpectedly quit while trying to restore its windows.do you want to restore its windows again? i clicked restore windows option which is showed on the monitor and jumping repeatedly .pleas solve it

restore windows is the headline.the application "finder" unexpectedly quit while trying to restore its windows.do you want to restore its windows again?this message showing on monitor. i clicked restore windows option which is showed on the monitor and jumping repeatedly .please tell me how can i solve it?

Selecting the "No" button will tell Finder not to try and reopen the windows.

Data load eoor , ple solve asap

hi
i am getting this error please let me know solutions
in details tab getting this error also
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Non-updated Idocs found in Business Information Warehouse
Diagnosis
IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
Processing is overdue.
Error correction:
Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
ple let me know ans
can i goto sm58 and run luw for both r/3 and idoc ?
regards
suneel.

Hi,
In RSMO, select the particular load you want to monitor.
In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
In the next screen you can select the Execute button and the IDOCS will be displayed.
Check Note 561880 - Requests hang because IDocs are not processed.
OR
Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Hope this helps.
Thanks,
JituK

Runtime error while creating variables? ( ple solve me asap)

hi friends,
whilw working with 3.x reporting, i created variable, now i am moving that variable from left to right paneli am getting run time error.
how can i solve ?
regards
suneel.

hi suneel,
Do you see any more details via ST22
if It shows 0 runtime errors against ur id, then you have to install note 950992
Are you having this issue in the BEx Analyzer as well or just when using the new 2004s runtime?
What about using the BW 3.x web analyzer? Does it happen there?
atul

Charactestics with replacement path getting error (ple solve urgent)

hi frieds,
how are you. i created 2 queries
first query (sender) customer material and quantity
2nd query (receiver) customer sales.
now i went rsbbs and joined 2 queries. i went sender query and gto and rec i got 2 queries.
now i went sender query used varible characterstics with manual entry/default now i went receiver quer charracterstics with replacement path, when i am creting variable i am getting error like i can use variable in default value.
why.
ple let me know solution.
regards
ssk

SSK,
I'm not totally sure I understand what you mean by getting a characteristic with a replacement path.
Yes you need two queries for a RRI - one sender and one receiver.
When you run the sender query you may or may not enter variables into the query to run it. When the query is run you will select a row in your results area, right mouse click, select Got - and then pick the Query you have setup the RRI with from the resulting Context menu.
Lets say you are on a row that contains the characteristics Customer / Material and Date. When you execute the jump, the values of the three characteristics for the row that you were on when you did the jump will automatically be passed to your receiver query, as long as those three characteristics exits in your receive query. They should not have any variables on them in the receive query - the jump passes the values from the sender query to the receiver query.
let me know how you get on.
Regards
gill

Ple correct my variables?its great if solve asap

hi friends,how are you, past 2 days i am trying this problem , i am not getting . ple solve my problem
1st query (sender)
Customer   quantity
c1         1000
c2         2000
c3         3000
i created variable charracter with user entry/default( customet right click variable)
2nd query (receiver)
Material Customer Sales
m1         c1            100
m2         c2            200
m3         c3            300
now i selected customer selected replacement path is processing type and gave sender query name in this variable.
now i went rsbbs joined 2 queries.
now my doubts is with variable and without variables i am getting same answer.
here how my character with replacement path is effected.
ple correct and solve.

Hi Suneel,
On the receiving Query, you need to restrict the customer by the variable value.
The value for the variable will be passed by the first Query....When you "jump to target"..
When you jump from Query1 to Query2....you will get the Materials and the sales amounts
only for the Customer that you selected in   Query1.
Good luck, BB

Obsolete statistics

Hi all,
We have different installation, R/3 4.6C, BW3.5, BW 310c, CRM 4.0...and my question is about the transaction DB13 for daily DB check, the result based on configured table in DBSTATC, the system doesn't detect others tables with obsolete statistics, so, I've my own process that I start and this process is like DB20 doing a refresh and computing the difference in %, and after this I use the list to compute the statistics. So, do you think there's a way to locate those obsolete statistics ?

Hi Fidel,
When during a process there's many operations like delete/insert/update on a table (for example srrelroles on CRM env.), you can start from DB13 a DBCHECK and the result is OK, green, because this table in not in the configuration table for statistics (DBSTATC), but when you start TR DB20 and you enter table name and refresh, the system compute a deviation, and if this deviation is greater than 50%, the system give you a message "statistics are obsolete" and to solve this, you have to compute/estimate the statistics. Hope this help you.
Regards,
Jade

Ple response for my hierchies pro?

hi friends,
i posted 2 times this question, i didnt get any proper response, that why i am posting again
i created hierchy.i am making report for that converted as info provider
i drag and drop charracter under properties i gave g hierchies name
i am getting this message while executing my query
REP     Number of Records
Not Assigned REP (s)     1
Not assigned     1

hi pb,
its showing in maintain hierchy my hierchy structure
this steps i done
i created 3 objects
zsregion
zscountry
zsrep
under region i gave usa and europr
under usa only usa
under europe england and germany
under country i gave 2 tep for every country ) so total 6 sales representatives_
i got hierchies in like
sales hierchy
when i expand i got europ and americe
when i eapand europe i got eng and germany when i expand my countries i got my sales rep
i selected rep and cliecked external hierchy and moved my region and country fro left to right panel.
created info source, psa, gave hierchy name under maintain hiercghjy in tranbsferrules.
created infop package and load psa and info object.
then went info provider , insert rep as data provider. this is enough or can i do any thing here.
then i wnet rrmx, drop my rep and rown under properties i gave hierchy name and executed. i am getting that error message
in 3.5 when i was working i got same resules in excel , when i am doing in 7.0 i am getting taht message, ple solve it.
regards
ssk

Graphics render bug in FCP 6 and 7 - Dare to prove me wrong?

I have an issue with an HD video that contains red and purple text and graphics in the edit. I've looked for an answer tirelessly online, with friends, and through trial and error for a good 7 hours before giving up. Here's the deal,
Sequence settings: HD 1440x1080 16:9, 23.98, HDV 1080p24 for editing the canon7d footage that came in - this however doesn't matter because i tested with every setting imaginable including animation raw and ended up with the same results for the graphics problem I'm having (kind of unrelated to the actual footage).
I need to output this 9 minute edit I have to an HD file 1280x720 for youtube upload. So, it has to be under 2gb (youtube's limit) but for client purposes, it needs to be crisp and great looking as you would imagine.
I have a bunch of PSDs, each show a different line drawing of a brush. For each one, the line is a different color. For any of the colors that aren't red or purple, they render crisp and wonderful in final cut pro over top the video. However, the graphics that have the lines that are red or purple, come out pixelated and blurry no matter how i try to render them. The only solution that worked was to render and output them with the animation codec. ProRes HQ worked too but not as well. However, this makes a file way too big. Whenever I went from animation to h264 or from FCP to h264, or any other web friendly format, graphics come out way pixelated. It makes me frustrated as to why all the graphics that were exactly the same except not red or purple came out perfectly crisp. Also, why is animation codec the only codec out there (besides uncompressed obviously) that will create clean edges in these red/purple graphics?
Conclusion: Found that reds and purples are the only colors that seem to be effected when rendering the graphics. Everything else comes out nicely. Animation and pro res codecs aside, any codec making the video small enough for the web (less than 2gb) resulted in the problem of pixelation with the red and purple graphics. Based on extensive research I did online, I was surprised not to find many people posting about the exact same problem. For the issues I did find that seemed related, people concurred that HD nor regular DV video do a good job rendering bright reds or variations of red. Because I found no solutions online or from all the things I tried in the list below
-re-rendered the PSD's in Final cut pro with variation of sequence setting to see if that would make any difference - it didn't. Tried all kinds of different settings in export for h264, keyframes, max quality, etc. no luck.
-tried rendering to "Animation/uncompressed" as far through the process as possible. For instance, I outputted a perfectly crisp "Animation" file that was perfect looking. As soon as I re-exported to h264, mpeg4, or sorenson, or any other codec dropping the file size down, all results returned pixelated results for the reds and purple graphics.
-made sure photoshop settings were all good, even copied and pasted psd into new 1920x1080 project, played with DPI up to 300 to see if it did anything, saved as different formats TIFF, png, eps, layers, flattened, 8-bit, 24-bit, 36-bit, etc., none of the formats worked correctly.
-outputted my own purple and red graphics and text and rendered in final cut to see if the file had anything to do with it. same problem with my red and purple graphics and text.
-Tried adding slight moving grain to the graphic in Final cut to try and trick FCP to thinking it was a video instead of a graphic and therefore render it smoothly.
-consulted with 2 other video editors/media experts, ended up frustrating them as well (and hurting their ego a little since they were sure they could figure it out)
-Ran the shot and graphic through after effects and premiere pro separately (different video programs) to see if final cut pro was causing the problem, same problem with those programs.
-tried rendering on a different mac, still the same.
-Actually upgraded my final cut pro version to the new version (now Final cut studio 3). Ran tests on new version of final cut pro, same exact problem.
-added black edge to purple graphics to see if that did anything different to the rendering. Didn't help
-Changed the hue of the graphic to anything other than red or purple. Wouldn't you know...That fixed it.
Here is a link to the Animation Output of a half second of the edit with a sample red graphic crisp as can be for you to test (12.7mb) -
http://www.robinsonhope.com/downloads/makeup_animationtest.zip
Here is a link to view screenshots before and after to show you what rendering does to the graphics.
http://www.robinsonhope.com/downloads/makeup_ss.jpg
In case you'd like to try and find a solution, please download the link to the HD animation half-second clip and output to h264 or any other web friendly codec that would show these red graphics clean and not blurry and pixelated. Other rule is after doing the math, a 9 minute video with the compression you choose would need to be under 2gb. This shouldn't be too much of a problem because even a 1280x720 h264 at max quality for a 9min video is still under 2gb.
The first person to show me that you are truly a FCP guru and can solve this, post a link of your successful solution, I will praise you as genius all over this forum. I will also be eternally grateful. Live in LA? I'll also buy you dinner, Haha. But seriously...

Welcome to this forum,
Sorry to hear you so struggling with this issue.
And I doubt whether I can solve this for you, but I can say a few things.
The title of this thread is:
Graphics render bug in FCP 6 and 7 - Dare to prove me wrong?
I'll prove you are wrong. Or actually you've already proved yourself wrong in your post:
-Ran the shot and graphic through after effects and premiere pro separately (different video programs) to see if final cut pro was causing the problem, same problem with those programs.
Seams that I try to annoy you, but I'm not. It's not a joke. The fact that other applications can't handle it as well AND the fact that Animation Codec (Which is pretty lostless) does not have this problem, tells you that the problem is likely the low compression you want OR the footage itself. And I dare say it's BOTH.
I downloaded your testfile and have opened it in FCP and I can see in the Vectorscope that your color Red is too hot.
[Click here|http://i843.photobucket.com/albums/zz356/rienkL/Screenshot2010-04-02at1324 20.png] to see the vectorscope of your picture?
You also see the small boxes (clockwise)
Red, Magenta, Blue, Cyan, Green, Yellow. The signal of your picture should stay somewhere between those boxes. You should read [this article|http://www.larryjordan.biz/articles/lj_scopes.html] (two third on the page) about the vectorscope. Also has a picture with the range to be broadcast safe.
So back to your picture and your vectorscope. You'll see that just along the right side of the R in the vectorscope there's a peak which goes way out of the range. And that's exactly the color of your graphic.
I tried isolating that color, reducing the saturation, and then do an export, but that failed. You should adjust that within the PSD's first and then see how exporting goes.
So now you are thinking: My client wants his own colors! Sure he does. But those colors were probably designed for print, which does have another colorrange. Simple technical story. You're bound to specific saturation. Going over that means troubles....
And I'm not claiming that your problem will be solved when you adjust this. It is still possible that h264 just doesn't like red too much. Maybe that's on purpose. Our eyes are most less sensitive to red, so that gives the compressor some extra room to compress in the reds (Don't know if this is what compression developers do; just thinking out loud, just an idea...)
Hope this helps at least a little.
Rienk

I tried transferring my iphoto library from my old macbook onto my new macbook pro, but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. now iphoto won't let me do anything to fix!!

i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high). please help!!

See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
Good luck,
Clinton

Internal Hard Drive will not mount -- need help!

My Mac Dual 450 has been a constant problem since I installed Tiger several weeks ago. There have been crashes every day. Disk First Aid did not help. Then I discovered I had TechTool Deluxe which I had gotten from Apple a few months ago. It has diagnostics for just about everything you can think of. I tried it. Big mistake.
Everything came out OK except it said there were some bad blocks, and an invalid BTree node size 8.0 (whatever that is). I tried to get it to repair the HD and it said it could not, that the HD was not mounted (I had booted from TechTool disk). Then I tried to reboot from the internal HD and I got a big bad black box saying that I had to restart. I tried that many times and kept getting the message. I booted from the Apple Tiger install disk and tried to run Disk First Aid on my HD but it said there were problems and Disk First Aid could not correct them because the HD was not mounted. I tried this and the TechTools Disk many times. Same result.
I then booted from an external system 9.2.2 HD and tried to use the Disk First Aid on that. Same result: it said the Macintosh HD (my internal) was not mounted so Disk First Aid could not repair it.
I have tried everything I could think of (option-boot, C-boot, etc) and nothing will let me boot from the internal HD or even mount it. I spent quite a bit of time with AppleCare rep and he could not succeed in getting the HD to mount.
He suggested either trying Disc Warrior which I do not have, or possibly resetting the PMU on the logic board and he sent me instructions for that, which seem ominous to say the least. And I doubt that it would solve my problem since the computer sees the HD, it just can't mount it. Resetting the PMU seems to be for computers that can't see the HD and won't start. But mine does just fine with other start-up disks.
Are there any suggestions on what else I can try? Is there a program that can be downloaded that mounts hard drives?
My Mac Dual 450 has 1.25 gb of RAM.
Thanks for any help. I need it fast.

Thank you for your suggestions and your continuing interest in trying to solve my problem. I rebooted with CMD + S and got the black screen with white text. Unfortunately I could not type anything on it. I typed /sbin/fsck -y and hit return. Nothing showed on the screen. I waited awhile in case this was one of those situations where it is hidden. But nothing happened. I tried the whole sequence a couple more times and same thing: I was unable to type anything that would show up on the screen.
Am I missing something here? I tried typing holding down various keys and could not get anything to register.
For what it is worth, the last line that showed on the screen is "panic. We are hanging here..."
I do not think that is related to what I typed since it was there when the screen first appeared, but could it nonetheless have somethng to do with my computer or hard drive?
I am right now installing system X.4 onto an external HD. If I can get that to boot and work OK, I can just use that for awhile until I get the internal either replaced or repaired.
If you see my previous posts, I had a devil of a time installing system X.4 to begin with. Maybe my HD was troubled all this time??? Or could there be some other underlying problem with my Dual 450? I suppose I will find out when I try to boot from the external.
Incidentally, I have an external HD with 9.2.2 on it and have had no trouble booting from it or using it.
Thanks again for your help.
Power Mac Dual 450 Mac OS X (10.4)
Power Mac Dual 450 Mac OS X (10.4)

Macbook Pro won't let me move files to HD without authentication. Also when I try to move files from the HD to the desk it just copies them.

My 2013 Macbook Pro running Mavericks 10.9.5 won't let me move files to the HD without authentication. So I have to keep putting my password in. Also when I try to move files from the HD to the desk it just copies them. This just suddenly happened last night. Anyone have any ideas what it could be? Thanks

See http://support.apple.com/kb/HT1229?viewlocale=en_US - I doubt that it will solve your problem, though. You may want to post on the iPhoto forum - that's where all of the iPhoto experts hang out.
Good luck,
Clinton

How can I modify this makefile to create proper ARMV7 dylibs?

I need to modify this makefile in order to create proper dylibs for inclusion in my IOS projects. If I just using the dylibs generated without changing this file, I get this error trying to use the dylibs:
ld: warning: ld: warning: ignoring file Undefined symbols for architecture armv7s:
"_mongo_connect", referenced from:
      -[ViewController viewDidLoad] in ViewController.o
libbson.dylib, file was built for unsupported file format
( 0xcf 0xfa 0xed 0xfe 0x 7 0x 0 0x 0 0x 1 0x 3 0x 0 0x 0 0x 0 0x 6 0x 0 0x 0 0x 0 ) which is not the architecture being linked (armv7s):
Undefined symbols for architecture armv7s:
"_mongo_connect", referenced from:
      -[ViewController viewDidLoad] in ViewController.o
libbson.dylibignoring file
Undefined symbols for architecture armv7s:
"_mongo_connect", referenced from:
      -[ViewController viewDidLoad] in ViewController.o
libmongoc.dylib, file was built for unsupported file format
( 0xcf 0xfa 0xed 0xfe 0x 7 0x 0 0x 0 0x 1 0x 3 0x 0 0x 0 0x 0 0x 6 0x 0 0x 0 0x 0 ) which is not the architecture being linked (armv7s):
Undefined symbols for architecture armv7s:
"_mongo_connect", referenced from:
      -[ViewController viewDidLoad] in ViewController.o
libmongoc.dylib
Undefined symbols for architecture armv7s:
"_mongo_connect", referenced from:
      -[ViewController viewDidLoad] in ViewController.o
The makefile:
# MongoDB C Driver Makefile
# Copyright 2009, 2010 10gen Inc.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Version
MONGO_MAJOR=0
MONGO_MINOR=6
MONGO_PATCH=0
BSON_MAJOR=$(MONGO_MAJOR)
BSON_MINOR=$(MONGO_MINOR)
BSON_PATCH=$(MONGO_PATCH)
# Library names
MONGO_LIBNAME=libmongoc
BSON_LIBNAME=libbson
# Standard or posix env.
ENV?=posix
# TODO: add replica set test, cpp test, platform tests, json_test
TESTS=test_auth test_bcon test_bson test_bson_subobject test_count_delete \
test_cursors test_endian_swap test_errors test_examples \
test_functions test_gridfs test_helpers \
test_oid test_resize test_simple test_sizes test_update \
test_validate test_write_concern test_commands
MONGO_OBJECTS=src/bcon.o src/bson.o src/encoding.o src/gridfs.o src/md5.o src/mongo.o \
src/numbers.o
BSON_OBJECTS=src/bcon.o src/bson.o src/numbers.o src/encoding.o
ifeq ($(ENV),posix)
    TESTS+=test_env_posix test_unix_socket
    MONGO_OBJECTS+=src/env_posix.o
else
    MONGO_OBJECTS+=src/env_standard.o
endif
DYN_MONGO_OBJECTS=$(foreach i,$(MONGO_OBJECTS),$(patsubst %.o,%.os,$(i)))
DYN_BSON_OBJECTS=$(foreach i,$(BSON_OBJECTS),$(patsubst %.o,%.os,$(i)))
# Compile flags
ALL_DEFINES=$(DEFINES)
ALL_DEFINES+=-D_POSIX_SOURCE
CC:=$(shell sh -c 'type $(CC) >/dev/null 2>/dev/null && echo $(CC) || echo gcc')
DYN_FLAGS:=-fPIC -DMONGO_DLL_BUILD
# Endianness check
endian := $(shell sh -c 'echo "ab" | od -x | grep "6261" >/dev/null && echo little || echo big')
ifeq ($(endian),big)
    ALL_DEFINES+=-DMONGO_BIG_ENDIAN
endif
# Int64 type check
int64:=$(shell ./check_int64.sh $(CC) stdint.h && echo stdint)
ifeq ($(int64),stdint)
    ALL_DEFINES+=-DMONGO_HAVE_STDINT
else
    int64:=$(shell ./check_int64.sh $(CC) unistd.h && echo unistd)
    ifeq ($(int64),unistd)
        ALL_DEFINES+=-DMONGO_HAVE_UNISTD
    endif
endif
$(shell rm header_check.tmp tmp.c)
TEST_DEFINES=$(ALL_DEFINES)
TEST_DEFINES+=-DTEST_SERVER="\"127.0.0.1\""
OPTIMIZATION?=-O3
WARNINGS?=-Wall
DEBUG?=-ggdb
STD?=c99
PEDANTIC?=-pedantic
ALL_CFLAGS=-std=$(STD) $(PEDANTIC) $(CFLAGS) $(OPTIMIZATION) $(WARNINGS) $(DEBUG) $(ALL_DEFINES)
ALL_LDFLAGS=$(LDFLAGS)
# Shared libraries
DYLIBSUFFIX=so
STLIBSUFFIX=a
MONGO_DYLIBNAME=$(MONGO_LIBNAME).$(DYLIBSUFFIX)
MONGO_DYLIB_MAJOR_NAME=$(MONGO_DYLIBNAME).$(MONGO_MAJOR)
MONGO_DYLIB_MINOR_NAME=$(MONGO_DYLIB_MAJOR_NAME).$(MONGO_MINOR)
MONGO_DYLIB_PATCH_NAME=$(MONGO_DYLIB_MINOR_NAME).$(MONGO_PATCH)
MONGO_DYLIB_MAKE_CMD=$(CC) -shared -Wl,-soname,$(MONGO_DYLIB_MINOR_NAME) -o $(MONGO_DYLIBNAME) $(ALL_LDFLAGS) $(DYN_MONGO_OBJECTS)
BSON_DYLIBNAME=$(BSON_LIBNAME).$(DYLIBSUFFIX)
BSON_DYLIB_MAJOR_NAME=$(BSON_DYLIBNAME).$(BSON_MAJOR)
BSON_DYLIB_MINOR_NAME=$(BSON_DYLIB_MAJOR_NAME).$(BSON_MINOR)
BSON_DYLIB_PATCH_NAME=$(BSON_DYLIB_MINOR_NAME).$(BSON_PATCH)
BSON_DYLIB_MAKE_CMD=$(CC) -shared -Wl,-soname,$(BSON_DYLIB_MINOR_NAME) -o $(BSON_DYLIBNAME) $(ALL_LDFLAGS) $(DYN_BSON_OBJECTS)
# Static libraries
MONGO_STLIBNAME=$(MONGO_LIBNAME).$(STLIBSUFFIX)
BSON_STLIBNAME=$(BSON_LIBNAME).$(STLIBSUFFIX)
# Overrides
kernel_name := $(shell sh -c 'uname -s 2>/dev/null || echo not')
ifeq ($(kernel_name),SunOS)
    ALL_LDFLAGS+=-ldl -lnsl -lsocket
    INSTALL_CMD=cp -r
    MONGO_DYLIB_MAKE_CMD=$(CC) -G -o $(MONGO_DYLIBNAME) -h $(MONGO_DYLIB_MINOR_NAME) $(ALL_LDFLAGS)
    BSON_DYLIB_MAKE_CMD=$(CC) -G -o $(BSON_DYLIBNAME) -h $(BSON_DYLIB_MINOR_NAME) $(ALL_LDFLAGS)
endif
ifeq ($(kernel_name),Darwin)
    ALL_CFLAGS+=-std=$(STD) $(CFLAGS) $(OPTIMIZATION) $(WARNINGS) $(DEBUG) $(ALL_DEFINES)
    DYLIBSUFFIX=dylib
    MONGO_DYLIB_MINOR_NAME=$(MONGO_LIBNAME).$(DYLIBSUFFIX).$(MONGO_MAJOR).$(MONGO_M INOR)
    MONGO_DYLIB_MAJOR_NAME=$(MONGO_LIBNAME).$(DYLIBSUFFIX).$(MONGO_MAJOR)
    MONGO_DYLIB_MAKE_CMD=$(CC) -shared -Wl,-install_name,$(MONGO_DYLIB_MINOR_NAME) -o $(MONGO_DYLIBNAME) $(ALL_LDFLAGS) $(DYN_MONGO_OBJECTS)
    BSON_DYLIB_MINOR_NAME=$(BSON_LIBNAME).$(DYLIBSUFFIX).$(BSON_MAJOR).$(BSON_MINOR )
    BSON_DYLIB_MAJOR_NAME=$(BSON_LIBNAME).$(DYLIBSUFFIX).$(BSON_MAJOR)
    BSON_DYLIB_MAKE_CMD=$(CC) -shared -Wl,-install_name,$(BSON_DYLIB_MINOR_NAME) -o $(BSON_DYLIBNAME) $(ALL_LDFLAGS) $(DYN_BSON_OBJECTS)
endif
# Installation
ifeq ($(kernel_name),SunOS)
    INSTALL?=cp -r
endif
INSTALL?= cp -a
INSTALL_INCLUDE_PATH?=/usr/local/include
INSTALL_LIBRARY_PATH?=/usr/local/lib
# TARGETS
all: $(MONGO_DYLIBNAME) $(BSON_DYLIBNAME) $(MONGO_STLIBNAME) $(BSON_STLIBNAME)
# Dependency targets. Run 'make deps' to generate these.
bcon.o: src/bcon.c src/bcon.h src/bson.h
bson.o: src/bson.c src/bson.h src/encoding.h
encoding.o: src/encoding.c src/bson.h src/encoding.h
env_standard.o: src/env_standard.c src/env.h src/mongo.h src/bson.h
env_posix.o: src/env_posix.c src/env.h src/mongo.h src/bson.h
gridfs.o: src/gridfs.c src/gridfs.h src/mongo.h src/bson.h
md5.o: src/md5.c src/md5.h
mongo.o: src/mongo.c src/mongo.h src/bson.h src/md5.h src/env.h
numbers.o: src/numbers.c
$(MONGO_DYLIBNAME): $(DYN_MONGO_OBJECTS)
    $(MONGO_DYLIB_MAKE_CMD)
$(MONGO_STLIBNAME): $(MONGO_OBJECTS)
    $(AR) -rs $@ $(MONGO_OBJECTS)
$(BSON_DYLIBNAME): $(DYN_BSON_OBJECTS)
    $(BSON_DYLIB_MAKE_CMD)
$(BSON_STLIBNAME): $(BSON_OBJECTS)
    $(AR) -rs $@ $(BSON_OBJECTS)
install:
    mkdir -p $(INSTALL_INCLUDE_PATH) $(INSTALL_LIBRARY_PATH)
    $(INSTALL) src/mongo.h src/bson.h $(INSTALL_INCLUDE_PATH)
    $(INSTALL) $(MONGO_DYLIBNAME) $(INSTALL_LIBRARY_PATH)/$(MONGO_DYLIB_PATCH_NAME)
    $(INSTALL) $(BSON_DYLIBNAME) $(INSTALL_LIBRARY_PATH)/$(BSON_DYLIB_PATCH_NAME)
    cd $(INSTALL_LIBRARY_PATH) && ln -sf $(MONGO_DYLIB_PATCH_NAME) $(MONGO_DYLIB_MINOR_NAME)
    cd $(INSTALL_LIBRARY_PATH) && ln -sf $(BSON_DYLIB_PATCH_NAME) $(BSON_DYLIB_MINOR_NAME)
    cd $(INSTALL_LIBRARY_PATH) && ln -sf $(MONGO_DYLIB_MINOR_NAME) $(MONGO_DYLIBNAME)
    cd $(INSTALL_LIBRARY_PATH) && ln -sf $(BSON_DYLIB_MINOR_NAME) $(BSON_DYLIBNAME)
    $(INSTALL) $(MONGO_STLIBNAME) $(INSTALL_LIBRARY_PATH)
    $(INSTALL) $(BSON_STLIBNAME) $(INSTALL_LIBRARY_PATH)
scan-build: clean
    scan-build -V -v make
test: $(TESTS)
    sh runtests.sh
valgrind: $(TESTS)
    sh runtests.sh -v
docs:
    python docs/buildscripts/docs.py
clean:
    rm -rf src/*.o src/*.os test/*.o test/*.os test_* .scon* config.log
clobber: clean
    rm -rf $(MONGO_DYLIBNAME) $(MONGO_STLIBNAME) $(BSON_DYLIBNAME) $(BSON_STLIBNAME) docs/html docs/source/doxygen
deps:
    $(CC) -MM -DMONGO_HAVE_STDINT src/*.c
32bit:
    $(MAKE) CFLAGS="-m32" LDFLAGS="-pg"
test_%: test/%_test.c test/test.h $(MONGO_STLIBNAME)
    $(CC) -o $@ -L. -Isrc $(TEST_DEFINES) $(ALL_LDFLAGS) $< $(MONGO_STLIBNAME)
%.o: %.c
    $(CC) -o $@ -c $(ALL_CFLAGS) $<
%.os: %.c
    $(CC) -o $@ -c $(ALL_CFLAGS) $(DYN_FLAGS) $<
.PHONY: 32bit all clean clobber deps docs install test valgrind

Hi Petar,
Thanks for your answer. No doubt that we could solve the issue using on of the way you suggested.
However, even though I had the evdre issue right after applying time dimension modifications, it occurs that the evdre issue was not due to time dimension modifications. I tested it better and I can tell that using "total" as a level works.
Best regards,
Ludovic

Input file should be deleted only after the output file is successful.

Hi Experts,
Could you pleas solve the below issue.
In a file to file scenario, the input file will be picked from a directory location and after processing output file will be placed in the output directory location specified in the receiver communication channel.
In the sender communication channel for the scenario mentioned above, if the processing mode is given as delete, the input file will be delete as soon as the file was successfully read by the adapter, but this will not ensure that the file processing is complete and the output file is being created.
If we have a scenario in such as way that the input file should be deleted from the input folder only if the complete process is successful and the output is generated. how can we achieve this functionality?.
And one more thing if we got the successful output the output file should be placed in one folder. and the if the output file is having errors it should be placed in other folder.

Hi,
In Receiver communication channel I have used the below command in Run Operating System
.And I have kept the processing mode of sender communication channel as test.
cmd.exe: /C "del /Leela/test.xml"
You are running the comman line program configured in the receiver File Adapter,but in command line you mentioned the Sender File Folder , So i guess it's not getting processed.
Try this:
Try to run the command line in the Sender File Adapter Side
"Place this in " --> Run OS Command After Message Processing.
Hope this would work and get in parrallel with u r requirement.
regards
Srini

Baseline date determination for Vendor Payment Terms

Hi gurus ,
Here is the question :
In Financial Accounting> Accounts Payable & Recievable>Vendors>Business transactions>Maintain Payment Terms
While maintaining payment terms Baseline date needs to be determined . What is the importance of Document date and Posting
Date for maintaining payment terms for vendors ?
Could anybody give some information on teh influence of Document Date and Posting Date formaintaining payment terms for
Vendors.
Any help is rewardable since i m a technical ABAPER have very little knowledge about FICO Functional.
Thanks
Kylietisha
Edited by: kylietisha on Jul 22, 2010 6:14 PM

Hi,
Suppose your Document date is 1.1.2010 and Posting date is 5.1.2010. And payment term 10 days for discount 5% and no discount thereafter.
If you set the baseline date as Doc date, your due date falls on 11th. Which means you cant post discount 5% if payment received after 11th.
If you set the baseline date as Posting date, your due date falls on 16th. Which means discount is given till 16th.
Hope this clears your doubt.
Ravi.

BI statistics doubts? (banu ravi ple solve)

Similar Messages

Maybe you are looking for