BI Statistics -- Need to display list of Queries with query counter

Hi All,
I am using the the infoobject
0TCTBISBOBJ (BI Application Object)  - for to get the list of queries inthe system.
I am also restricting the infoobject 0TCTBISOTYP(BI Application Object Type)-  to ELEM (Query) inthe filter area.
I loaded load master data for 0TCTBWOBJCT_ATTR and 0TCTBWOBJCT_TEXT.
The PROBLEM is  0TCTBISBOBJ (BI Application Object) is not only displaying queries but all the other elements like navigational attributes and some junk values like
'$ABSEMA0
'$VIRTUAL-000001
Please help me isolate just queries for my display.
Thanks,
HM

HI,
Your query setup is correct, please check Note 936519 - Duplicate Records while loading 0TCTBWOBJCT master data, and many others.
I have customers running stack 11 & 12 and had to apply dozens of notes to get TCT 7.0 to work properly. And even now about 3 notes per week are being released.
Regards Patrick Rieken.

Similar Messages

  • How to display list of TCodes with Change Documents enabled

    Hi
    I have 42 transaction codes (e.g. QA11, QA12, QE51N, QE01, QE02, MM01, MM02) and I want to verify if "change document" logging is enabled for the critical data elements in these transactions. 
    I'm aware that you can individually check "change document" setting per table via SE11 > Enter Table Name > Technical Settings > “Log Data Changes” option.   Given the number of transactions (with multiple data elements) I need to check though, is there a  table in SAP where the field, table, tcode and existing change document setting can be viewed?
    Thanks
    T-code
    Description
    MM01
    Create material
    MM02
    Change material
    ME01
    Maintain source list
    MSC1N
    Create batch
    MSC2
    Change batch
    QA01
    Create inspection lot
    QA02
    Change inspection lot
    QA11
    Record usage decision
    QA12
    Change usage decision
    QA14
    Change usage decision without history
    QA16
    Collective usage decision for OK lots
    QA32
    Inspection lot selection
    QAC1
    Correct actual quantity in inspection lot
    QAC2
    Transfer inspection lot quantity
    QAC3
    Inspection lot – reset sample calculation
    QE01
    Record results
    QE02
    Change results
    QE51N
    Work list: results recording
    QM01
    Create quality notification
    QM02
    Change quality notification
    QP01
    Create Inspection Plan
    QP02
    Change Inspection Plan
    CS01
    Create BOM
    CS02
    Change BOM
    CC01
    Create Change Master
    CC02
    Change Change Master
    SU01
    Maintain authorizations
    SE38
    Execute program
    COR2
    Change process order
    CC22
    ECM Change Object Management Records
    MMDE
    Delete all materials
    COR1*
    Create process order with material
    QA08*
    Mass change of quality management inspection data
    C201*
    Create Master Recipe
    C202*
    Change Master Recipe
    C298*
    Deletion of Task Lists without Archiving
    QPR4*
    Process Physical-Sample Drawing
    COEBR*
    Batch Record Approval
    QPR1*
    Create physical sample
    QPR2*
    Change sample
    CV01N*
    Create Document
    CV02N*
    Change Document

    hi Raphael,
    you can also use following two table to view the change log at data element level:
    CDHDR - Change document header
    CDPOS - Change document items
    e.g. give the table CDHDR in SE16N enter your transactions field "TCODE", and date parameter, you can see the results.
    Regards
    Javed

  • Need to display chart in PowerView with data from YESTERDAY

    My apologies if this is a very basic question but I cannot, for the life of me, find a solution to this.
    I need to show ONLY yesterday's data on ONE of the charts I have on a PowerView dashboard. I also need to show Last WEEK's data (Today-7), last Month's (to date) data, and last Year's (to date) data all on the same PowerView page in different charts.
    What's the best way to do this? 

    Hi Micheal,
    According to your description, you need to add filter to the chart of your Power View report, so that you can get Yesterday data, Last WEEK's data (Today-7), last Month's (to date) data, and last Year's (to date) data, right?
    Based on my teste, when add a filter to a chart on a PowerView report, we can set the data is after a specific day. However, we cannot add expression on the value of the filter. So on the PowerView level, there is no a functionally to work around this requirement.
    What you can do is creating the measures for Yesterday data, Last WEEK's data (Today-7), last Month's (to date) data, and last Year's (to date) data, and then use it on your PowerView report.
    https://msdn.microsoft.com/en-us/library/ms166568.aspx
    Regards,
    Charlie Liao
    TechNet Community Support

  • Black background in native Display List elements overlayed with Starling

    Hello, I'm having an issue in the iPad, where all native DisplayObjects are shown with an opaque black background instead of being transparent while being displayed over Starling graphics using "nativeOverlay". This doesn't happen in the PC, in ADL, only in the iPad. Does anyone know what's causing this?
    I also tested in Android, and this doesn't happen. So this is a problem only in iOS. Is this a known problem? Surely someone has tried before to overlay Flash display objects over Starling display objects and had this issue?
    Any possible fixes or workarounds for this?
    Thanks!

    Hello, I just found the culprit of this annoying bug.
    It's StageVideo! If you play any video with StageVideo BEFORE showing any Stage3D/Starling stuff, then you'll get this behaviour (native DisplayObjects with opaque background over Starling).
    This is a bug which happens to be almost 1 year old!
    Please, check this out and vote to try to get this finally fixed for good!!
    https://bugbase.adobe.com/index.cfm?event=bug&id=3186454

  • Need help on performing database queries with a general query

    Dear experts,
    I have two issues
    1)
    I have developed a software which connects to Oracle database
    performing and executing DDL/DML statements.
    I am using a Jdbc thin oracle driver.
    When i perform a wrong syntax query or say a query using invalid column.I get exception accordingly.However,I want to know if there is any way by which i can know the exact position where i am making error
    just as an asterik(*) comes in sql plus in case of invalid column or so.
    2)
    Whenever i minimize software window (made of swing components)
    and again maximize it.It takes almost 12 secs to be visible otherwise it remains white.Is swing that much slow ???

    (1) No.
    (2) It's possible to make Swing programs that slow. (I know, I have done it.) But usually the slowness is in application code (your code) and not in Swing itself.

  • To get the list of queries in which a particular variable is used - urgent

    Hi Friends,
    I have a list of variables which were used in some queries, now I need to know list of queries in which the given variable is used.
    for example: There is a variable called ZVBASMNT and used in some queries, I want to get the names of the queries in which it was used.
    please give some short method for this, if there is any table or Tcode for this please provide, its bit urgent.
    Thanks & points will be given for the helpful answer
    Regards...
    Ganesh

    Dear Ganesh,
    Yes, You can find.
    Goto Metadata Repository in RSA1.
    Click on Query
    Selct / Click on a Query which uses your variable ZVACITY
    Click on your variable
    Just observe the USED BY list.
    Regards,
    Ram.

  • Need to display null values against table

    Hi All,
    I have one table in which I only need to display null values along with the rest of columns. for example
    ename sal date
    scott 2000 15/07/06
    Michal
    now my query should return---
    ename sal date
    michal
    hare krishna
    Alok

    Maybe it is something like this?:
    michaels>  select column_name || ' contains ' ||
           dbms_xmlgen.getxmltype ('select sum(nvl2(' || column_name || ',0,1)) c from ' || table_name ).extract ('//text()').getnumberval() ||
           ' NULL values' null_columns
      from cols
    where table_name = 'EMP'
       and dbms_xmlgen.getxmltype ('select sum(nvl2(' || column_name || ',0,1)) c from ' || table_name ).extract ('//text()').getnumberval() > 0
    NULL_COLUMNS                                                                               
    MGR contains 1 NULL values                                                                 
    COMM contains 10 NULL values  

  • Scaling factors for queries with cell references

    Hello Experts,
    We have this issue, we have queries which have 2 global structures with the cell references for few of the elements of rows and columns structure.
    we need the scaling factors and currencies of the query which are defined in the rows and columns structure are to be displayed as separate column but with in the cells.
    We have checked for the queries with the 2 structures without cell references are displayed as we need. But for the queries with the cell references on the 2 structures are not displaying the scaling factors as we need in separatly.
    how can we make the query to display the scaling factors along with currencies to be in separate column.
    we have entry selection as currency where we have only one currency can be entered so the we do not have the problem of multiple currencies.
    please find the screen shot how we need the scaling factors to be displayed for the queries with cell references.
    We have scaling factors enabled as 1000 for KFs and for % selections we have scaling factors as 1.
    Thanks,
    Santhosh

    Hi
    If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
    If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
    Regards
    Sandeep

  • SharePoint 2013 List View with query string filter stops working after editing view from browser

    I have created one list definition in which I have added one list view which will filter data from query string paramater
    So when I am creating list from my list definition, view with query string filter is working fine.
    But when I am modifying view from UI(I am not changing any thing , just opening "Modify View" page and then click on "Save" button), view gets stop working means it's not filtering data based on query string
    Any suggestion what I am missing?
    Below is my list view schema
    <View BaseViewID="11" Type="HTML" TabularView="FALSE" WebPartZoneID="Main" DisplayName="$Resources:OIPLBScoreCard,viewFilterTasksByTarget;" MobileView="True" MobileDefaultView="False" Url="FilteredTasks.aspx" SetupPath="pages\viewpage.aspx" DefaultView="FALSE" ImageUrl="/_layouts/15/images/issuelst.png?rev=23">
    <Toolbar Type="Standard" />
    <ParameterBindings>
    <ParameterBinding Name="NoAnnouncements" Location="Resource(wss,noXinviewofY_LIST)" />
    <ParameterBinding Name="NoAnnouncementsHowTo" Location="Resource(wss,noXinviewofY_DEFAULT)" />
    <ParameterBinding Name="TargetId" Location="QueryString(TargetId)" />
    </ParameterBindings>
    <JSLink>hierarchytaskslist.js</JSLink>
    <XslLink Default="TRUE">main.xsl</XslLink>
    <JSLink>clienttemplates.js</JSLink>
    <RowLimit Paged="TRUE">100</RowLimit>
    <ViewFields>
    <FieldRef Name="Body"></FieldRef>
    <FieldRef Name="Title"></FieldRef>
    <FieldRef Name="StartDate"></FieldRef>
    <FieldRef Name="DueDate"></FieldRef>
    </ViewFields>
    <ViewData>
    <FieldRef Name="PercentComplete" Type="StrikeThroughPercentComplete"></FieldRef>
    <FieldRef Name="DueDate" Type="TimelineDueDate"></FieldRef>
    </ViewData>
    <Query>
    <Where>
    <Eq>
    <FieldRef Name="oipscTargetLookup" LookupId="TRUE"/>
    <Value Type="Lookup">{TargetId}</Value>
    </Eq>
    </Where>
    </Query>
    </View>
    I have one lookup field from "Target List" in my source list and I want to filter data based on that lookup field.

    Hi JayJT,
    The Miscellaneous is located in the contact list that you used for the connection.
    So , you need to edit the page, then edit the contact list that you used, in the web part properties of the contact list, you will find Miscellaneous, then expand it and select ‘Server Render’ .
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Queries with out workbooks???

    Hi,
    I wish to have a list of queries which do not have workbooks -
    And i am creating a report which will have these information such as the list of queries with out workbooks and who is calling them??
    Raj

    God idea Parth!
    Now is solved, the table is AGR_HIER
    Thank you very much!!

  • Display Synchronised System Clock With Milliseconds (HH:MM:SS:mm)

    Hello All,
    I need to display the system clock with hours, minutes, seconds and milliseconds (the system clock it synchronised via NTP or GPS and needs to be accurate)
    Using the Buddy API time functions I can display the time with an accuracy of seconds but the inbuilt lingo "the Milliseconds" and Ticks does not correspond to the system time.
    for example I tried using
    member("MyTimeStamp").text = baSystemTime("%0H"&":"&"%0M"&":"&"%0S"&":"&chars(""&the milliseconds, 6,7))
    but the seconds change out of synch with the milliseconds, the milliseconds are approximately 10-12 ms faster and I don't want to fudge the timing, I recorded the display with a slow motions camera and can see the seconds reset to 0 when the milliseconds are already at a value of 10 - 12.
    Any Idea how I can derive milliseconds using the system time? HH:MM:SS:mm
    thanks.

    10-12 ms delay (error) is the correspondent of a 80-100 FPS (polling interval).
    Theoretically speaking, to get 1ms delay (error) you need to run your script at 999 FPS (the max value allowed by D12).
    Practically speaking, that's not possible (many other factors are involved here).
    cheers

  • How to find the list of Queries for that have statistics enabled in the sys

    Hi ,
    How to find the list of Queries  that have statistics enabled on them in the system.
    Please help me in this regard
    Thanks
    Maruthi

    hi ,
    I found three options there like
    X - on
    D - Default
    off
    can you please expalin the difference between on and Default
    Thanks in Advance
    Maruthi

  • Help needed in list item...need to display employee of a selected dept

    Hi All,
    I am very beginner in D2K technology.I am using 10g Forms.
    Could you please help me...
    I have created a list item which contains dept_id=10,20,30....
    My requirement is when i will change the value of dept_id(select dept_id=20),the employees belong to that dept will display(need to display 5 employees of dept 20).
    I hav created two block--block2 and block3
    In block2,there is a list item
    In block3,there is a display item and i changed the properties number of record displayed to 10 of the block.
    I atteched a trigger when-list-changed and the code is :
    select last_name into :block3.item14 from employees where department_id=:block2.item4;
    But It is not working.....
    Thanks in Advance,
    Tapan.
    Edited by: user630863 on Aug 8, 2010 9:20 PM
    Edited by: user630863 on Aug 8, 2010 9:55 PM

    okk..well still i don't know the purpose of the form on which you are working why not the database block for emp?..but the requirement you are asking can be done through following code...
    Trigger - WHEN-LIST-CHANGED
    DECLARE
      CURSOR F_Cur IS
        SELECT ename
        FROM emp
        WHERE deptno = :list_item_name;
    BEGIN
      GO_BLOCK('BLOCK3');
      FIRST_RECORD;
      CLEAR_BLOCK;
      FOR G_CUR IN F_CUR LOOP
        :block3.item_name:=G_CUR.ename;
        NEXT_RECORD;
      END LOOP;
      FIRST_RECORD;
    END;
    Note: in the BLOCK3 there should be one item navigable by cursor. I mean if block3 is having only one item which is name item and it is display item then GO_BLOCK built-in will not work. So, you will need to create one more in block3 or make that name item as text item and set update_allowed to NO from the items' property.
    -Ammad

  • [svn:fx-trunk] 12542: When adding a mask to the display list need to validate it and all its children .

    Revision: 12542
    Revision: 12542
    Author:   [email protected]
    Date:     2009-12-04 10:38:32 -0800 (Fri, 04 Dec 2009)
    Log Message:
    When adding a mask to the display list need to validate it and all its children.  Previously the children were not validated and their display list was updated before properties were committed or measure was done.  RichText was not set up to handle this.
    QE notes:
    Doc notes:
    Bugs: SDK-24511
    Reviewer:  Evtim, Deepa
    Tests run: checkintests, fxg, primitives, Group
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24511
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
        flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/MaskUtil.as

    AFAIK, the only way to do this is to write a system modifcation.
    The BADI is executed only once at startup of the session, so that makes it merely static. (A strange point in time, I discussed it with SAP and they just shook their heads)
    I had the same problem with some other F4-Helps and it was a big hazzle. From my experience, no straight answer.

  • [svn:fx-trunk] 11641: A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks , not just alpha masks.

    Revision: 11641
    Author:   [email protected]
    Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
    Log Message:
    A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
    QE notes: Please include tests for multiple graphic content nodes with masks under a .
    Doc notes: N/A
    Bugs:
    SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
    Reviewer: Deepa
    Tests run: Checkintests, Bug test case
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24133
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

    Revision: 11641
    Author:   [email protected]
    Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
    Log Message:
    A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
    QE notes: Please include tests for multiple graphic content nodes with masks under a .
    Doc notes: N/A
    Bugs:
    SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
    Reviewer: Deepa
    Tests run: Checkintests, Bug test case
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24133
    Modified Paths:
        flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

Maybe you are looking for