BI Statistics NW2004S Content - Virtual Info Provider 0TCT_VC01

Hi
We implemented BI NW2004S statistics for front end OLAP analysis which consists of info providers 0TCT_C01, 0TCT_C02. However, when we activated the queries, we are not seeing enough data in queries even though the info providers are loaded correctly. SAP has provided content for 0TCT_VC01 & 02 as virtual info providers which are used in multi providers -0TCT_M01 & M02 along with the base info providers mentioned above. All content queries are built on these multi providers and currently in our multi provider we have just base info providers but not virtual info providers.
Now my question is, on virtual info providers - These virtual info providers are based on DTP and am just wondering which data source I should use to maintain transformation as info provider based on DTP would require transformations to load the cube. I have used data sources 0TCT_DS01 & 02 to map transformations to base info providers 0TCT_C01 & C02 respectively.
Pls confirm on how I should use these virtual info providers as part of multi providers and which data source should I use to maintain transformation.
I am hoping that by including virtual info providers into the above multi providers, I would be able to see the data to analyze query performance during user navigations.
Appreciate your response.
Thanks

RSDDSTAT_OLAP->0TCT_DS01(data source)->InfoPackage->0TCT_C01(0TCT_MC01)->0TCT_MC01_Q*(queries)
The cube 0TCT_C01 gets filled from data source 0TCT_DS01 which is again gets data from the view RSDDSTAT_OLAP.
So whenever you run queries (3.x or 7.0) or templates (3.x or 7.0) or workbook (3.x or 7.0), this view gets filled.
So, you please schedule the releavant process chain or infopackage which will fill the cube 0TCT_DS01, then you will be able to use the queries built on this cube.These process chains are starting with 0TCT*.The installation steps and scheduling steps are very well explained in the note 934848.
P.S. SAP delivered queries are based on multicube 0TCT_MC01 (built on 0TCT_C01 and 0TCT_VC01) and not on 0TCT_C01
0TCT_VC01 Usage -
The purpose of virtual cube 0TCT_VC01 is to give delta data.
For ex, you would've scheduled the process chain for loading 0TCT_C01 every day in the mid-night. If you are running the query built on 0TCT_MC01 cube in the morning, you will miss the data from yesterday mid-night till today morning. To give this delta data, the virtul cube is used in the multi cube.
Hope it Helps
Chetan
@CP..

Similar Messages

Inconsistent Query Result in SEM-BCS using Virtual Info Provider

We have just upgraded to BW 7.0 and SEM-BCS 6.0. When we run an existing 3.5 BW query for BCS through the Virtual Info Provider against the basic consolidation cube, we are getting inconsistent results. Sometimes we get the correct result, and other times our results are not rolling up correctly causing an out of balance on our balance sheet query. We did not make any hierarchy changes between the query executions. Has anyone else experienced this? We cannot see the cause of the inconsistency. Everything looks good when running through RSRT DEBUG. Any help on pushing us in the right direction to solve this would be appreciated.
Thanks,
Rob

Hi Rob,
Could you please let me know how you have resolved this issue? Thanks.
Regards,
Ashok

Source system in Virtual Info provider

Hi!!
I am creating an application which is based on virtual infoprovider and which read data from website and produce data for reporting but i am confused about logical system name as cube is not executing in listcube transaction.!!!
Regds,
Pooja

hi Pooja,
Logical System name is your BW System ie BWDCLNTXXX where XXX is your client ID, for more information you can contact your basis person,
as far as listcube is concern, you have to check few thing before extracting data from website.
1. your system must be able to connect to Net.
2. check proxy configuration and port entry in Network (ur network guy helps u)
3. check RFC "Http_Get", if it works fine then your infocube configuration may be wrong.
I hope it will helps you..
Regards,
Gourav Khare

Error reading data from Info Provider

Hi Folks,
I am executing a report and am getting the following error message:
Error reading data of Info Provider.
System Error: Whole Number Overflow on Multiplication.
The infoprovider being read is a Virtual Info provider Based on DTP/3.x InfoSource.
Let me know what could be the potential problem here ? How would I fix such issues.
Regards
Arjun

Hello,
There is some problem in data. Check if in transformation u have any formulas or routines.
regards,
Shashank

Statistics indicator for info provider

Hello dear BWers,
I have been asked to set the statistics indicators for the info providers that the queries need to access...
Where do I do this?
BR,
Fredrik

Thanks Bhanu,
I really appreciate all your help!
Many points to you!
Best regards,
Fredrik

Administrate virtual info cube with services

hi, all,
if you come across an existing virtual info cube with services, HOW can you find out the name of the function module, that provides the data?
best regards
neven

hi..
according to the below link..from help.sap.com...clicking on 'detail' pushbutton in cube--change screen..should give u the details(FM etc) u need..
http://help.sap.com/saphelp_nw04/helpdata/en/62/d2e26b696b11d5b2f50050da4c74dc/content.htm
Vishvesh

Information Broadcasting(Event Data change in Info provider)

Hi All,
Does anyone have experince on the functionality Information Broadcasting ,Can you please help me where we use Trigger event when change in the info provider in the process chains.I want to know when we use the (Trigger event in the Broadcaster) in the process chains,how will it take effect in the Information Broadcasting scheduler screen when we select the particular Info provider when there is any data change.Can you please elaborate on the topic if any one has used the event data change in the info provider.Actually I Executed and scheduled the pocess chains, when I go to the Process chain log ,It says that the Job is finished and the data change is occured for the Cube,but I dont get any error message and I dont get any mail to my Inbox.Can you please through some light if anyone has worked on this,Answers are always appreciated and rewarded.
Thanks.

Hi,
Usually we trigger an event in SM64 tcode..if u want to create an event u will go for SM62.
In addition to time- and calendar-based job scheduling, the background processing system supports event-driven scheduling.
Triggering an event notifies the background processing system that a particular condition has been met. The background processing system reacts by starting any jobs that were waiting for that event.
Events are not saved. Once an event occurs and triggers any jobs that were waiting for that event, the event is discarded
U can monitor process chain via Tcode 'CCMS'..
Information broadcasting allows you to make objects with Business Intelligence content available to a wide spectrum of users, according to your own requirements.
Go through this
Information Broadcasting:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/359840dfa5a160e10000000a1550b0/content.htm
Including an Event Data Change in a Process Chain :
http://help.sap.com/saphelp_nw04/helpdata/en/ec/0d0e405c538f5ce10000000a155106/content.htm
Regards-
Siddhu
Message was edited by: sidhartha

Info provider not found for 2LIS_13_VDKON

Hi,
We are using 2LIS_13_VDKON data source for Billing Conditions ( Plug in 2004.1).
Am unable to find the Info Provider for this data source /info source at 3.3 content. ( Unless my selections were incorrect).
Shall you please kindly help me if this info source is already in use.
Our extraction was strcuked at PSA level because of No data target it looks like we need to built custom ODS/Cube.
Thanks for earliest reply.
kind regards
martin

found in 3.5 content.
Cheers
martin

Info set , info provider and info spoke

Hi gurus plz give me the difference in between info set and info provider and info spoke. and give me what are the prerequisites are needed to process infoset, infoprovider and info spoke?
Regards
Vidhu

InfoProvider
An InfoProvider is an object for which queries can be created or executed in BEx
Check this for more,
http://help.sap.com/saphelp_nw04/helpdata/en/4d/c3cd3a9ac2cc6ce10000000a114084/content.htm
Infoset:
An InfoSet is a special view of a dataset, such as logical database, table join, table, and sequential file, and is used by SAP Query as a source data. InfoSets determine the tables or fields in these tables that can be referenced by a report. In most cases, InfoSets are based on logical databases.
SAP Query includes a component for maintaining InfoSets. When you create an InfoSet, a DataSource in an application system is selected.
Navigating in a BW to an InfoSet Query, using one or more ODS objects or InfoObjects.You can also drill-through to BEx queries and InfoSet Queries from a second BW system, that isConnected as a data mart.
The InfoSet Query functions allow you to report using flat data tables (master data reporting).Choose InfoObjects or ODS objects as data sources. These can be connected using joins.You define the data sources in an InfoSet. An InfoSet can contain data from one or more tables that are connected to one another by key fields.The data sources specified in the InfoSet form the basis of the InfoSet Query.
Check the link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
InfoSpoke:
Info spoke is an open hub destination defines to which target the data is to be relayed.
Check this link for more,
http://help.sap.com/saphelp_nw2004s/helpdata/en/ad/2225391d4f000be10000000a114084/frameset.htm
Check this doc also,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/eb462104-0701-0010-07ae-d866630e0989
Hope this gives you a good idea...

How to find the activity of the Info cubes or any other Info Provider

Hello everyone,
Is there anyway to find out the last activity date of the info cube or any other info provider?
One way is through tools--> Statistics for BI (But this is not working as I do not have enough authorizations in the office)
So, can anyone please give me a way to know the last activity date of all the Info Provider so that respective action can be taken on the Info Provider according to their usage.?
I also need the Procedure to know the activity of the queries also?
Hope to get an answer soon..!
Thanks in advance..!
Deepak

Hi,
Are you looking actvity related to (Data retrival or data load)? (When the last time data loaded in Info provider or when the last time query is executed on that Info provider)?
If this is your requirement then BI statistics is only way to find out so get the authorization for the same.
If your need is -- last changed/llast data load etc.. then you may check the option "last changed at" at in Info provider maintinence, and data load dates.
I hoep it will help.
Thanks,
S

Short dump when expand info provide

Dear all,
I have 0GL_ACOOUNT info object that act as a master data.
the problem is when I want to expand at the info provider instantly create short dump
the overview of the short dump is :
Runtime Errors         ASSERTION_FAILED
Date and Time          12.08.2009 10:08:16
Short text
     The ASSERT condition was violated.
What happened?
     In the running application program, the ASSERT statement recognized a
     situation that should not have occurred.
     The runtime error was triggered for one of these reasons:
     - For the checkpoint group specified with the ASSERT statement, the
       activation mode is set to "abort".
     - Via a system variant, the activation mode is globally set to "abort"
       for checkpoint groups in this system.
     - The activation mode is set to "abort" on program level.
     - The ASSERT statement is not assigned to any checkpoint group.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Information on where terminated
    Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBJ_DATA=======CP" -
     in "GET_TRFN_AWBSUBOBJ".
    The main program was "RSAWBN_START ".
    In the source code you have the termination point in line 23
    of the (Include) program "CL_RSAWBN_OBJ_IOBJ_DATA=======CM005".
Source Code Extract
Line SourceCde
    1 METHOD get_trfn_awbsubobj .
    2
    3   DATA: l_tranid   TYPE rstranid,
    4         l_s_source TYPE rstran_s_tlogo,
    5         l_s_target TYPE rstran_s_tlogo,
    6         l_objvers TYPE rsobjvers.
    7
    8   l_tranid = i_objnm.
    9   l_objvers = rs_c_objvers.
   10
   11 * get the source and target for the tranid
   12   WHILE l_s_source IS INITIAL OR l_s_target I
   13     TRY.
   14         cl_rstran_stat=>get_objects(
   15           EXPORTING
   16             i_tranid   = l_tranid
   17             i_objvers = l_objvers
   18           IMPORTING
   19             e_s_source = l_s_source
   20             e_s_target = l_s_target
   21                ).
   22       CATCH cx_rstran_not_found .
>>>>>         ASSERT sy-index < 2.
   24     ENDTRY.
   25 * for possible second run set objvers
   26     l_objvers = rs_c_objvers-modified.
   27   ENDWHILE.
29 * pass back the su
30   IF i_target = rs
31     re_awbsubobjec
32   ELSE.
33     re_awbsubobjec
34   ENDIF.
35
36 ENDMETHOD.
Please advice

HI,
I have read the sap notes and that is exactly what happen to me.
but I don't understand how to correct it.
It said :
This error cannot be corrected automatically. Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified (in the short dump, the TranID that is specified in the short dump is in the variable L_TRANID).
anybody know how to use delete_version_from_db ?
please advice

Info-objects of an Info-provider under one Transport request

Hi All,
I am in the process of transporting the Objects from development to QA environment,
As a first step in the transport process, i need to transport the info-objects before transporting other info-providers, transformations etc,
i have several info-providers like BBP_PO, SC, SCA etc, which inturn has more than 100 info-objects that needs to be put under seperate transports.
Say i have info-provider ZBBP_SCA which has 50 info-objects, i need to put those 50 Info-objects in one transport request and then info-provider ZBBP_SCA in another transport request and then its transformations etc.
Can anyone tell me the steps of only collecting the necessary info-objects of ZBBP_SCA alone to be put under one transport.
I tried to do that, but it is collecting all the info-objects, info-areas related to ZBBP_SCA, instead of collecting only necessary objects of ZBBP_SCA.
I will assign points for sure
Can anyone help
Thanks in advance
Pooja

Hi pooja,
So your intention is not to include anything other than target in second request.
For this right click over the object from where you dont intend to transport and say donot transport any below in transport connection.
The reason for target also showing the info objects and so on is that they are all necessary to form this cube definition.
Anhyhow, as you have ensured to collect them seperately go ahead with the approach mentioned above.
Naveen.A

Problems generating Hana analytic privileges based on BW info provider

Hi Experts
We generate Hana views based on BW Info Providers. We follow the guide “SAP First Guidance – SAP NetWeaver BW 7.40 on HANA View Generation”. . The views appear perfectly in Hana Studio but we are not able to generate the authorizations in Hana.
On the BW side we have a authorizations relevant info object in the DSO that generate the View in Hana. The info object is linked to an authorization object that again is linked to a role. The role is the assigned to a user. We have synced all our users from BW to Hana using the standard concept (same username in BW and Hana).
When the view is generated we can see that view in Hana and we can see that a role is also create in Hana. But there are no analytical privilege created and there are no entries added in the table RS2HANA_AUTH_STR. The user also do not get the role assigned to him.
Are there any other steps that need to be done to be able to generate the authorizations in Hana based on BW authorizations?
We use BW 7.4 and the generate function (not the import function into Hana).
Kind regards
Erik

Hi Erik,
Please check if below characteristics are included in the analysis authorization assigned to the user:
0TCAIPROV = Info provider id
0TCAACTVT = 03
0TCAVALID = *
0TCAKYFNM = *
<authorization relevant characteristic of your info provider> = Required value.
If you are assigning these authorizations now, run RS2HANA_CHECK tcode for this user. This should generate analytic privilege and user should get the role in HANA.
Thanks

How to get the latest update time of a info provider in ABAP

hi experts,
i am doing a ABAP program and need to get the latest update time of a info provider , does anyone know where it stores in BW or any other way to get it?
many thanks
WHY

Table : RSREQDONE
you can give INFOPAK_ID as parameter and search for latest/last Request ID and dispaly time and Date.
Cheers
Praveen

Query for Info Provider

How to create query for infoprovider ? I have selection criteria, calculation and result screen for queries taken from one reference query. I am new to this part so dont know which transaction we will use to create query. Is it APO part or BI/BW part ?

I have to create queries for info provider. I have one reference query. I have to create similar selection screen as that of reference query for new query. Calculation which needs to be included in query is provided also result screen for query is given.
how to create query in APO using above input? Which transaction do we use to create query ?
I heard about BEx query analyzer which is there in BI for query creation . Is similar BEx functionality is available in APO ? If yes , what is t-code used for that? I know one tcode - RSRT with which I can see existing reference query selection? Is there similar tcode for query creation also in APO?

BI Statistics NW2004S Content - Virtual Info Provider 0TCT_VC01

Similar Messages

Maybe you are looking for