BI Support Package from 15 to 18
Hello All,
We are planning to implement SP15 to SP18 in our BI environment.
How do we proceed ?
Software Components
SAP-JEECOR 7.00 SP15
SAP_JTECHF 7.00 SP15
UMEADMIN 7.00 SP15
LM-TOOLS 7.00 SP15
ADSSAP 7.00 SP15
JSPM 7.00 SP15
CAF 7.00 SP15
SAP_JTECHS 7.00 SP15
BI_UDI 7.00 SP15
WDEXTENSIONS 7.00 SP15
BI-REPPLAN 7.00 SP15
EP-PSERV 7.00 SP15
KMC-CM 7.00 SP15
KMC-COLL 7.00 SP15
LM-PORTAL 7.00 SP15
RTC-STREAM 7.00 SP15
UWLJWF 7.00 SP15
VCBASE 7.00 SP15
VCKITBI 7.00 SP15
VCKITGP 7.00 SP15
VCKITXX 7.00 SP15
CAF-KM 7.00 SP15
VCFLEX 7.00 SP15
VCFRAMEWORK 7.00 SP15
EP-WDC 7.00 SP15
EPBC2 7.00 SP15
KMC-BC 7.00 SP15
SAP-EU 7.00 SP15
NET-PDK 7.00 SP15
RTC 7.00 SP15
BI-WDALV 7.00 SP15
BASETABLES 7.00 SP15
CORE-TOOLS 7.00 SP15
JLOGVIEW 7.00 SP15
BI_MMR 7.00 SP15
CAF-UM 7.00 SP15
EPBC 7.00 SP15
KM-KW_JIKS 7.00 SP15
SAP-JEE 7.00 SP15
BI-BASE-S 7.00 SP15
BI-IBC 7.00 SP15
BIWEBAPP 7.00 SP15
Thx
AK
Adrein -
if you want to upgrade your BI component to level 18, then you have to upgrade the SAP_BASIS and SAP_ABA level to 16.
BI content level should be 09.
more over you have to upgrade the java to the same level as BI is having.
Your BI environment is pure ABAP or ABAP + Java.
Hope this would give you some clear idea on this.
Similar Messages
-
Moving Applied support packages from DEV to QTSY
Hi ,
I have applied some new support packages into DEV system now my scenario is just I want to move those support packages on to QTSY system instead of applying again on QTSY .is it possible ?,if yes ..Guide me with your procedure
Stephen> Hi ,
>
> I have applied some new support packages into DEV
> system now my scenario is just I want to move those
> support packages on to QTSY system instead of
> applying again on QTSY .is it possible ?,if yes
> ..Guide me with your procedure
>
> Stephen
Hi,
You have to apply them once again...no shortcut.Only you can save time to uncompress the patches,if you copy the /usr/sap/trans/EPS/in contents to the same location in target server.Use import from" application server" option from menu in SPAM.Apply the patches as normally you do....
Supriyo Choudhury -
SAP BW 3.5 - Upgrade support package from 18 to 21
Hi All,
We are planning to apply the SP 21 for SAP BW 3.5 system.
Currently we are on SP 18.
We had created a Customer message to SAP regarding the Pre-Preparatory Steps before applying and Post upgrade steps . But the reply we got is quite confusing.
In one of the steps they had asked us to delete the Delta queue and delete the Set up tables. But looks like they have got confused with the SAP R/3 Upgrade.
Previously, when we upgraded from SAP BW 3.1 to 3.5 we never touched anything concerned with the Source systems ( SAP R/3).
Could anyone guide me regarding this issue. Also it would be great help if anyone give the Pre-Preparatory Steps before applying and Post upgrade steps.
Regards,
SatishHi,
Just go apply for from SP18 to SP21 directly. Before applying for this better check with BW consultants and also check with ABAPers team.
http://service.sap.com/bi
http://service.sap.com/sp-stacks for BW 3..5 not for BI 7.0 (EhPs)
Regards,
Srini Nookala -
CRM 5.0 - Middleware issues after Support Package installation
Hi experts,
after upgrading the support package (from version 11 to version 17) we are facing a lot of issues.
1. We need to synchronize custom tables from CRM to R/3.
Can you give me an example on how to configure table SMOFQFIND/CRMMAPTAB for inbound queues CRI*?
We know we have to do but we don't know how.
2. We need to synchronize standard tables from R/3 to CRM.
Do you know we have to do some new configuration in SMOFQFIND/CRMMAPTAB table?
With the older version of SP we were'nt asked to configure those tables.
It has worked up to now
Thank you in advance
EmanueleHi,
We have the exact the same issue her using the 0DAT variable to restrict to the system date (in the filter process of the APD).
Did anyone resolve this issue?
Thanks,
Fabian -
Error in "Test IMPORT" during applying BASIS Support Package
Hi All,
I'm applying basis support package from SAPKB70014 to SAPKB70018,
now it hangs in Import phase: TEST_IMPORT, there maybe something wrong with the import object.
For detail screenshots, please kindly have a look at URL: http://nickfiles.150m.com/Question_1.html
And for the detail import log, please have a look at http://nickfiles.150m.com/SAPPB70015.html.
I think the root cause is located in:
2EETW165 Function "TMW_TAOAGENT (TMW_TAOINTERFACE|01)" does not fit into the existing function group "(TMW_CLIENT_INTERFACES|06)".
2 ETW167 Please transport the whole function group.
But I do not know how to solve it. Could anyone help me?
Thank you very much.
Best regards,
NickHi Nick,
This is the solution to your Issue..
Note 1156706 - Function TMW_TAOAGENT (TMW_TAOINTERFACE 01) does not fit...
Other SAPnote you can read .. for your help..
Note 42379 - SPAM aborts at step TEST_IMPORT
Note 1092979 - TMW_TAOAGENT: Repairing function group after SAPKB70013
Hope it will solve your issue ....
All teh best !! -
Hi there,
I've been upgrading the SAP Solution Manager EHP1 from support package 19
to 24, but i have a serious problem and i was not able to find a solution
neither at SAP Support Portal nor at SAP SDN.
Actually, the OCS SAPKW70020/21/22/23 were not applied and the next applied was SAPKW70101.
In this way, i'm not able to proceed with the upgrade cause there is that dependence.
Does anybody know how i can solve this?
Thanks in advance,
Dany AndersonThat means that your system was upgraded to EHP1, those packages are now irrelevant... you'll have to apply Support packages from Solman EHP1 instead
Read the documentation regarding applying EHP1 using SPAM/SAINT
Regards
Juan -
How to download support packs from solution manager
Hi Experts ,
Please tel me the process for down loading support packages from solution manager.iam very new to this process
How can get an approval in solution manager to down load support packages in step by step process
RegardsPlease check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
Kind regards,
Mark -
Spam/saint update and support package
Hi,
our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
*in solution manager support package is
SAPKB70008
SAPKA70008
SAPKIPYJ78
SAPKITLQI2
SAPKW70008
SAPKNA7005
SAPKU50005
SAPK-40005INCPRXRPM
SAPKITL416
SAPK-15074INSTPL
SAPKITLOG3*
*in dev/produ system support package is
SAPKB70011
SAPKA70011
SAPKIPYJ7B
SAPKITLQI3
SAPKW70012
SAPKNA7008
SAPKE60015
SAPKH60008
SAPKGPID08
SAPKGPGD08
SAPKGPRD08
SAPK-60008INFINBASIS
SAPKGPPD08
SAPKGPFD08
SAPKGPHD15
SAPKGPDD08*
please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
Regards,
AsifHi Asif,
How to get particular support package from service market place .
EX:SAPKB70011
If you want to download the patch SAPKB70011:
Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
You can add the required patch to your download manager.
Thanks & Regards,
Nagendra. -
Difference between support packages&kernels&add ons
can anyone help me out to know the difference b/w sp's,kernels & addons n also the procedure to apply them plz.
thanks in advance:
pcsagarHi chandra shekar,
Procedure to apply kernel patch.
1> Down load the latest kernel patch from the link
https://websmp105.sap-ag.de/patches
Down load two file for your kernel
Take #Database independent and other file be according to your database
#Database independent file will be SAPEXE<....>.SAR
File for your database will be SAPEXEDB<....>.SAR
2) Put these files in some location on the server.
3)Take backup of of the existing kernel.
4)stop sap
5)stop oscollector SAPOSCOL
6) Unpack the file using tool SAPCAR
7) COPY the unpacked files to the kernel directory with overwright option
start saposcol and then sap
Check the new version in sm51.
You can check below note for more information.
Note 19466 - Downloading SAP kernel patches
Applying support packages.
Down load the support package from the link
https://websmp105.sap-ag.de/patches
for applying check below links
http://help.sap.com/erp2005_ehp_03/helpdata/EN/a7/a7a932845c11d2b421006094b9ea64/content.htm
ADD-ON same procedure and you use -t-code SAINT
Regards
Ashok -
SPAM--How to cleanup new support packages list
Hi,
When i run SAPM T-code and click on "New Support Packages" ,it diaply
too many packages with status "not imported"..
i need to remove all of them make this empty.
How would i remove them from the list?
Thanks
RamGood afternoon, Ram - While in SPAM, you can go to "Environment --> Electronic Parcel Service --> Goto --> Inbox". Then you can put a check mark next to the support packages that you want to delete. This removes the support package from the queue, so if you want it back in you would have to reload the data file and cofile and then in tcode SPAM go to "Support Packages --> Load packages" and either load them again from your desktop or ftp the files to the "/usr/sap/trans" directory and use SAPCAR to unpack them again.
I hope this helps!
Regards,
Blair Towe -
EHP4 for ERP6/NW 7.01 Support packages location
Our SAP Component version is EHP4 FOR SAP ERP 6.0 / NW7.01.When I am trying to apply the support packages through SPAM(fron end ) i m getting an error no queue defined...?
I have downloaded the support packages from this download location.
- Support Packages and Patches - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" Entry by Component" SAP ECC Server VPack successor..
can any one help me by giving the correct download location..?
Edited by: letzfriend on May 9, 2011 12:53 PM
Edited by: letzfriend on May 9, 2011 1:05 PMHi ,
Seems that you have not defined the queue in SAP system. Please make sure that you have uncar all the components and put it under /usr/sap/trans/EPS/in directory.
in SPAN load all the components via support packs-> load components from application server in 000 client and then define the queue in a order so that you can import SPs in system.
Thanks..
Mohit -
Hi,
I have got a basic question.
1. I am performing clean installation and let's say the latest support package in the market is 10. Should i need to install support package from 1 - 10 (which would consume lot of time and effort) Or can I directly install Support package level 10.
Points gauranteed please help.
--RaguHi,
Thanks already got answer from another forum. But can you tell me how much time it will take for each support package, say i have got 2GB RAM.
Points gauranteed.
--Ragu -
???? in Menu Bar after upgrading support packages
Hi All,
I have upgraded the support packages from Stack 16 to Stack 20 for my ECC 5.0
Every functionality is fine after the upgrade. But when our consultant tries to check the material in transaction MB52, in the next screen we see some ?????? in the menu items which is supposed to have some options in letters. The functionality is fine when we click on it knowing the option which is supposed to be there.
Assuming that it is the issue with the GUI, we have upgraded our GUI to 710 patch level 4 which is the latest available. Still no luck.
Can anyone help me with this. This is holding our upgrade on quality.
Points will be rewarded.
Thanks
VijayHi All,
I resolved this myself. We just need to get to the screen shere the ???? show up and go to SYSTEM >> STATUS
Under SAP Data, double click on GUI Status > STANDARD
Select the Application Toolbar and click on Activate.
This should solve the issue.
Thanks
Vijay -
Official Support from SAP on Support package levels
I have NW7 Dual stack system. Currently at SP10
Looking for an "official Policy" on supported SP levels from SAP, if it exists already. Please help me by providing a link that information or a document if it exists.
We are working on an ongoing infrastructure support policy for this installation.
Thanks in advance.
VasuYou can run a certain level of support packages as long as you can live with the "deficiencies" resulting out of that. You can run on the initial installed level if you can deal with the fact, that you will need to apply a LOT of notes in case you run into an error (because of dependent notes because of the low support package level).
There may also be cases where it´s impossible to provide a correction by note (e. g. table changes) and where corrections can only be delivered by support packages.
Last but not least the law may force you to install a certain level (e. g. fiscal year change) to get the newest (and correct) data out of the system for all kinds of changes that may be necessary to comply the law.
Basically you can leave your system on a certain support package as long as you wish but it may become difficult or even impossible to give you a solution if more than an ABAP code correction is necessary.
This is especially true on dual stack systems where a change in the portal may force you to upgrade your complete backend to a certain level because there the ABAP + Java stack must be in sync --> one of the reasons why we totally avoid dual stack installations.
Markus -
Upgrade from 46c to ECC 6.0 new components support package
dear experts,
we have upgraded our test system from 46C to ECC 6.0
before upgrade in 46C we have support packages components
SAP_BASIS 46C
SAP_ABAP 46C
SAP_APPL 46C
SAP_HR
PI 2003_1_46C
SAP_NOTES 46C
ST-A/PI 01B_R3_46C
ST-PI 2005_1_46C
after upgrade to ECC 6.0 we found
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_BW 700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
EA-IPPE 400 0003
EA-HR 600 0003
EA-GLTRADE 600 0003
EA-PS 600 0003
EA-RETAIL 600 0003
EA-FINSERV 600 0003
EA-DFPS 600 0003
EA-APPL 600 0003
FINBASIS 600 0003
ECC-DIMP 600 0003
ERECRUIT 600 0003
FI-CA 600 0003
FI-CAX 600 0003
INSURANCE 600 0003
IS-CWM 600 0003
IS-H 600 0003
IS-M 600 0003
IS-OIL 600 0003
IS-PS-CA 600 0003
IS-UT 600 0003
LSOFE 600 0003
SEM-BW 600 0003
we are planning to apply SPS 06. Is it mandatory we have to apply
all the support packages in SPS 06.
we are confused as we dont use IS-OIL,EA-,ERECUIT,INSURANCE,FI-
please suggest which support packages we have apply relating to the
functionality we have in 46C
regards
RaghuHi,
you have to apply the same type of packages as before.
All other are included in ECC, but if you don't use the special services and applications (for example IS Oil or stuff like this), there is no need to apply all these packages.
SAP_ABA 700 0006
SAP_BASIS 700 0006
ST-PI 2005_1_700 0001
PI_BASIS 2005_1_700 0006
SAP_AP 700 0003
SAP_HR 600 0003
SAP_APPL 600 0003
should be enough
Regards
Timm
Maybe you are looking for
-
Wifi problem with iOs7.1
I have iphone 4s. Since yesterday, after upgrade the iOs to 7.1, I cant have online using wifi ! I have try: format, reset network, ... but it is still not working. Please help me my iphone 4s wifi grey out ios 7.1
-
Re: Hibernate Dialect error against Firebird 2.1.2 DB via JDBC
ColdFusion9 ColdFusionBuilder1 on XP Pro Ok, now I'm completely stuck. After 2 days of configuring CFB9 (and it's Administrator) I was able to, in CFB connect to a Firebird DB in design time using JDBC instead of ODBC. However, when I try to Run th
-
House Cleaning (OWB)
Hi, Currently my mappings are running fine. I just need to know some info on cleaning up my OWB audit and logs tables. My tablespace for OWB is increasing and how can i do a cleaning activity every month? Please give me some suggestion. Regards Raj
-
Hi , When do EBS configuration we need to assign account symbol to GL accounts. My question is when ++++++++++ is populated in GL account field for Bank Deposit symbol what is the account number range for '+++++++++'. Namely, which accounts will
-
I am trying to delete content and restore my daughter's old ipod touch so that my husband can use it. I had put a "restrictions" passcode on the touch and have now forgotten the code! Any answers as to how to get around this? Thanks in advance