BI - Sybase RFC connection & setup
Dear All
We are going to implement Sybase in our existing landscape.
Right now we have BI Component Ver. SAP NetWeaver 2004s with database Oracle 10.2.0.4.0. All BI reports are publishing in dashboard via EP Portal.
We want to connect our sybase server with BI and publish the all BI reports through sybase on EP portal
Should any one guide me how can i make the RFC from sybase to BI server. We decide to go with UD connection with JAVA JDBC connector. Should any one guide me to create the RFC TCP/IP RFC connection from BI to sybase server
BI server is running on SUN Solaris. OS
And sybase server is running on Windows 2k8 server.
Thanks and Regards,
Nirav Kundaria
Nirav,
The forum that you have posted your question in is for questions related to SAP Business One System Administration. Your question seems to be related to Sybase, BI and NetWeaver. You may have better luck posting your question in those forms here on SDN.
Eddy
Similar Messages
-
FTP RFC Connection setup - step by step
Good afternoon
I am not a BASIS/System Administrator; in my colleague's absence I have to attempt setting up an FTP RFC Connection.
I have the following information:
1. IP Address
2. Username
3. Password
The following is the setup I tried:
a. Connection Type == G - HTTP Connection to Ext. Server
b. Target Host (Technical Settings Tab) == &IP Address&
c. Logon username (Logon/Security Tab) == &Username&
d. Logon password (Logon/Security Tab) == &Password&
But, the 'Test Connection' fails with 'ICM_HTTP_CONNECTION_FAILED'.
Any suggestions to resolve will be much appreciated!
Thank you and best regards, AdrianHi Adrian,
Could you detail what you are trying to set up a connection to? This would help determine whether the connection type you are using is correct.
Regards.
Steve. -
EWA RFC connection SETUP - From Customer system to VAR solution Manager
Hi,
we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Thanks
Andrea>
Andrea Taccolini wrote:
> we are going to setup the EWA for our customers. So how I have to create the RFC from the customer system to our Solution Manager?
Hi Andrea,
Have you already tried to use SMSY to generate the "Back" Destination from customer system to your SolMan?
Once you have selected the customer system in SMSY, you are able to use the RFC connection wizard.
Alternatively, you can define the RFC destination manually.
For easier tracking and trouble shooting, I would recommend to setup a communication user in your SolMan for each individual connected managed customer system.
Assign the appropiate profiles to the user in your SolMan system and create the RFC destination in the managed customer system.
Best regards,
Ruediger -
RFC connection (SM59) fails with load balancing enabled.
Hello All,
We have an RFC connection setup between two SAP systems. The RFC connection works fine if it points to the destination system. But if we enable load balancing, the connection fails with this error:
ERROR partner not reached (host <hostname>, service sapms<SID>)
LOCATION SAP-Server <source system> on host <host name of source> (wp 1)
DETAIL NiPConnect2
CALL SO_ERROR
COMPONENT NI (network interface)
COUNTER 3027
ERROR TEXT Connection refused
ERROR NUMBER 79
MODULE niuxi.c
LINE 1069
RETURN CODE -10
SUBRC 0
RELEASE 46D
TIME Mon Aug 18 18:33:30 2008
VERSION 34
I've checked the /etc/services file, the following entries exist
sapms<SID> 3606/tcp
sapms<SID>s 3600/tcp
lstst at the source system works fine
lgtst -H <target host name> -S sapms<SID>
niping at the target system has a problem
> niping -c -S 3606
Mon Aug 18 10:23:14 2008
connect to server o.k.
ERROR => NiTClientLoop: NiTReadLoop (rc=-6) [nixxtst.cpp 2629]
ERROR connection to partner broken
TIME Mon Aug 18 10:23:14 2008
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE niuxi.c
LINE 905
DETAIL NiPRead (0.0.0.0/0, hdl 1)
SYSTEM CALL recv
COUNTER 1
Please help me figure out the problem.
regards,
RoshniHi,
I think you have added wrong port entry in services file.
The entry of sap servers in services file for load balancing are
sapms<SID> 36<instance number>/tcp
so please check once again and add the entry using above formula in services file.
Also add the entry of all SAP servers in your hosts file.
<IP> <HOSTNAME> -
RFC connection results in "Timeout during connection setup"
Hello Guys,
The RFC ABAP connection to the Solution Manager encounters connection error: "/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242#Timeout during connection setup."
The Solution Manager has following details:
SAP Solution Manager (700 15)
ORACLE 10.2.0.2.0
HP-UX
The R/3 QAS Customer 1 system has following details:
SAP R/3 Enterprise (620 54)
ORACLE 9.2.0.8.0
HP-UX
The R/3 QAS Customer 2 system has following details:
SAP R/3 Enterprise (620 59)
ORACLE 9.2.0.8.0
HP-UX
The RFC ABAP connection from <SID Solution Manager> -> <SID R/3 QAS Customer 1> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 2> -> <SID Solution Manager> is working correctly.
The RFC ABAP connection from <SID R/3 QAS Customer 1> -> <SID Solution Manager> encounters connection error:
ERROR timeout during allocate
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
DETAIL no connect of TP sapdp02 from host conssmp.servom host <host name Solution Manager> after 22
COMPONENT SAP-Gateway
COUNTER 1152
MODULE gwr3cpic.c
LINE 1820
RETURN CODE 242
SUBRC 0
RELEASE 640
TIME Thu Jun 5 10:55:15 2008
VERSION 2
Here's the dev_rfc0 log file
Trace file opened at 20080605 101956 METDST SAP-REL 640,0,235 RFC-VER 3 985555
======> CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFC_PING
User: SAPBEHEER (Client: 000)
Destination: <SID Solution Manager>CLNT010 (handle: 2, , {4846C6DC-14A2-0F1F-E100-0000AC1B29D8})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2277
CPIC-CALL: 'ThSAPCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
HOST =<host name Solution Manager>
SERV =sapdp02
Checked the error code 242 "GW_TIMEOUT" and found:
Connection setup to the remote gateway has been closed because timeout has been exceeded.
The time limit can be set in parameter gw/timeout.
Changed parameter gw/timeout to value 10000, but still encounter same error message.
From OS level <SID R/3 QAS Customer 1> i can ping the <host name Solution Manager>.
fvb1:/home/stampg$>ping <host name Solution Manager>
PING <host name Solution Manager>: 64 byte packets
64 bytes from 172.27.68.239: icmp_seq=0. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=1. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=2. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=3. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=4. time=1. ms
64 bytes from 172.27.68.239: icmp_seq=5. time=1. ms
conssmp.services.retail.tc PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 1/1/1
Any suggestions where to look ?
Regards,
GidionHello Gidion,
can you please verify the hostnames/FQDN's? Because:
LOCATION SAP-Gateway on host hemisrq.services.retail.tc.services.retail.tc / sapgw01
host hemisrq.services.retail.tc.services.retail.tc
It seems to me that somewhere the domain is double used.
Additionally:
Sometime there is sapgw 01, sometime sapdp 02. Can you please check the correct service numbers / system numbers?
Regards
Holger -
How to setup RFC Connection for SAPOSS?
Dear Experts,
I tried to setup the RFC connection for SAPOSS based on the following settings, but when I test connection, it failed.
Target system : OSS
Msg. Server : ... ( this where I stuck which I'm not sure what to fill in)
Group : EWA
Client : 001
User : OSS_RFC
Password : CPIC
Does anyone know the right settings?
Regards,
AbrahamHi all,
Do I really need to setup our own SAProuter if our firewall doesn't block any outbound IP address?
I've tried the following settings in OSS1 but still failed to connect.
SAProuter at SAP :-
Name : sapserv3 ( or sapserv7 or sapserv2)
IP address : 147.204.2.5 (or 194.39.134.35 or 194.39.131.34)
Instance no : 99
SAPNet Message Server
Name : oss001
DB Name : 001
Instance No : 01
I left the SAProuter1 and SAProuter2 (at customer site) blank.
Did I miss out anything? -
RFC connection error (VPN-access)
Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details DETAIL: NiPConnect2
Error Details CALL: SiPeekPendConn
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 592
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 8777
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details TIME: Thu Jun 19 10:42:42 2008
Error Details VERSION: 37
Can some one help to solve the problem?
Thank you very much
ThomHi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!! -
Hi,
Source system error.
BW
RSA1Source System (Context Menu) Check
Error: RFC Connection Check failed
Diagnosis
You tried to logon to check the connection to the source system. This was not successful.
System response
Name or password is incorrect. Please re-enter
Procedure
Check the BW destination in the source system. In particular with SAP connections make sure that you have entered the correct password.
How shall I proceed?
I checked User ID in Source System.
ThanksHi,
Its simple, when the BWALEREMOTE user was setup in your system, the password provided was incorrect or the user ID with that password might have been locked.
Using transaction SM59 you can setup the RFC Destinations. So, go to SM59 check the user ID and give the correct password.
Hope this solves your concern,
Regards,
Habeeb -
RFC connection from SAP R/3 to OS400 server
Hi,
I am trying to establish an rfc connection between an R/3 system and OS400 server.
I dont have much experience on communication interfaces i have seen different options in SAPRFC.ini file but still i wanted to get some expert comments from the experts.
Please help me on this.
Thanks
Junaid.Hi,
We had the same scenario here also. You can call .NET code from ABAP program using SAP .Net connector.
The data can be downloaded to SQL server based on periodic job wise (every Half an hour or 1 Hour) .
1. Write an ABAP report to get new personnal numbers from HR master tables based on created date.
2. Create a RFC to pass employees details.
3. You can create a proxy in .NET server stub code based on the above RFC.
4. Write code to get data .NET object and establise a connection to SQL server.
5. Write code to push data into SQL server tables.
6. After you complete the .NET code, when you generate this code will create an exe file.
7. You have to execute that exe with few command line arguments.
8. The command line arguments need to setup in RFC destination (SM59).
9. In that ABAP report call this RFC with RFC destination as you defined.
.NET code can be done by .NET person.
Let me know if you have any clarifications.
Thanks & Regards,
Govind. -
DB connect no data found is rfc connection required
Hi Gurus,
I want to retrieve data from oracle database, i have all the table with data in it, but through the source system i.e db connect it does not display any contents of the table, it says no data found, the installation was all done perfecttly fine, i can read the table fields but i am not able to read the data from the table. what could be the problem.
Is an RFC connection required for this db connect to retrieve the data from oracle. or else what is the issue. Can anyone please help me out on this, I already posted long back on this still no reply on it. From the osss notes it allgives information about the intallation but it there is no data found then it does not give any information onthis. Can anyone please help me out on this.
Thanks,
HemHi Hem,
You want to retrieve data from Oracle Database using BW and you are having a problem?
Try isolation technique to solve your problem.
Try to use third party softwares e.g. MS Excel. Retrieve data from Oracle using MSExcel. If MSExcel can retrieve data then you can conclude:
a.) The network connection to Oracle is fine.
b.) Oracle is up and running and is able to serve data from your specified table.
RFC Connection is not required. RFC is only useful for SAP to SAP communication. This connection uses a different technique and uses a different driver to communicate. SAP provided DB Connect Engine. A similar approach as what Microsoft's OLEDB is doing. This to make a transparent connection between various database systems. (whether MSSQL, Oracle, MSACCESS, SYBASE etc.)
As part of isolation technique, are you sure you are accessing the correct table? Try to access other tables. If you can access data of different tables then something is wrong with the table you want to access.
Have you check authorization issues? Are you allowed to extract data?
Hope I have helped. If I did, please grant points...
--Jkyle -
Abour Solution Manager RFC connection
Hi, All
About soulation manager 4.0, I got configuration guide to setup "Real time system Monitoring"
as per user guide -> create RFC connection and setup system monitoring, it make me little bit confousing
currently Solution manager setup for earlyWatch report and works fine.
WHAT I WANT ?
To seutp/configuration "REAL TIME SYSTEM MONITORING" for XI 3.0 and CCMS monitoring in Solution manager
T-code: SMSY shows this screen:-
There are 5 different types of Tab after apply SMSY
1. Landscape Components
2. Database
3. System Group and Logical Components
4. Product Definitions
5. Overview
I am not sure where I create RFC connection and what value will i put in it?
1. Landscape components shows under: all others server name list
SERVER
shows server host name: (r5wxw0) and right side windows shows
data source RFC
and Technical Data Tab shows all others value (that system I like to monitor)
2. DataBASE (all others application server name)
IDV
Header Data Tab
Data Source: TMS/RFC
3. System Group and Logical Components (under)
Project Landscapes
Solution Landscape - operation
Logical components
4. Product Definitions (under)
lot of product list
5. Overview
Server
Database
Systems
Now where sould I go to configure CCMS monitoring ?
Thanks in Advanced
TravisHi user issue2008 issue
actually i can't connect to solman, but i think it was under 3.
When you select a component, i.e. Dev R/3 or so you should have several clients.
There you can define RFCs and also there you can define Solution Monitoring.
But I think there should be already RFC-Destinations, when you had configured the EWA.
Then you should check the client with the RFC-Destination and Checking Destination.
In Edit-mode you can check the box for Solution Monitoring and save and ok.
After that it should be activated.
Hope it helps you.
Regards,
René -
RFC connection problem during SRM - R/3 integration
Hi,
Our environment is SRM 5.5 server with 2 R/3 backend systems. One of the R/3 systems is in another country. We happen to have RFC problems during the communication between the SRM and R/3 server.
Below you can find the SM21 log related to an operation on SRM server. What might be the reason for this problem? Does anyone know the solution?
Many thanks
Details Page 2 Line 26 System Log: Local Analysis of sapsrmt 1
Time
Type
Nr
Clt
User
TCode
Grp
N
Text
10:24:58
DIA
000
013
EMREK
R4
9
Communication error, CPIC return code 020, SAP return code 223
Communication error, CPIC return code 020, SAP return code 223
Details
Recording at local and central time........................ 07.12.2006 10:24:58
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
91342
Dialog work process No. 000
EMREK
XXXXXXXX
2
K
SAP Web AS Problem
STSK
Further details for this message type
Module nam
Line
Error text
Caller....
Reason/cal
thxxhead
7192
020223
ThRecei
CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find more
detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm. (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up SAP connection
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
672 ,,Logon to NetWeaver failed
673 ,,IMS Error Purging
674 ,,Timeout for registered programs
676 ,,TP not registered
677 ,,Timeout for registered programs
678 ,,TP is registered
679 ,,TP is not registered
720 ,,Security breach of registered programs
721 ,,SNC deactivated
722 ,,SNC required
723 ,,SNC name not defined
724 ,,Default SNC name not permitted
725 ,,Protocol does not support SNC
726 ,,No local SAP System
727 ,,SNC required
728 ,,Conversation ID not found
729 ,,SNS must do the communication
730 ,,Start of external programs deactivated
731 ,,Gateway shut down
732 ,,No external programs
733 ,,Conversation ID does not match
734 ,,Net conversation error
735 ,,Monitor is not active
736 ,,Conv-ID is not unique
Errors in the CPIC Interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
500 ,,No side info file exists
501 ,,CMRCV failed
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
6
245700
m
Error (Function,Module,Row)
R4
9
020223 ThReceiCPIC-Erthxxhead7192Hi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann -
RFC connection BI and ECC 6.0
Hi
I am trying to connect BI and ECC 6.0 at home on two different virtual machines for data extraction and practicing delta management ( they are on the same virtual network).
I am following these steps :
Step-by-step procedure to connect BI with ECCu2026
Define the logical system in R/3 using the transaction code SALE in both the systems (ECC and BI)
Assign Logical System to a client using transaction code SCC4 in both the systems (ECC and BI)
Setup the RFC Destination using transaction code SM59 in both the systems (ECC and BI)
Hit Transaction BD64 and Click Create model view - Enter the Short text u2013 Enter the Technical name u2013 Hit Execute - Distribution Model will be created and the technical name of the distribution model will be listed
Place the cursor on model created and and click Add message type button on the top right corner
Enter sender and receiver system IDs and select the correct message type assigned to the correct system
Distribute this model using Edit u2013 Model View u2013 Distribute
Select the receiver of the model view and proceed to distribute the model
Please note that the distribution of data model is not required to repeat in BI system as this step automatically replicates settings in BI
You have to generate partner profile for each system with which your system communicate using BD82
Outbound records are created in the partner profile for each outgoing message and inbound records are created for each incoming messages
You can view the partner profiles generated using the transaction code WE20
Message Types:
RSRQST: This message type is send by BI to R/3 while loading any data. This gives information about the data source, selection condition and other BI settings to R/3. As and when a load is started in BI, RSRQST message type is sent to R/3 requesting for data.
RSINFO: Once R/3 receives RSRQST message from BI, it sends an acknowledgment message type to BI informing about the status of the request. That is whether the request can be handled or not by R/3. It also gives information about how many data packages are being send and what is the total number of records extracted for the given data source and selection.
RSSEND: After sending a positive acknowledgement to BI, R/3 starts the extraction job and starts collecting data in data IDocs. This message type carries the actual data with it into the BI system.
My question is that : Do i know need to create three model views for these three message types?? Are these steps sufficient?
Please let me know if some other things needs to be followed or U know more simpler way to RFC connect so that I can pull data from ECC into BI and practice delta management.
Thanks
Edited by: max.sap on Apr 28, 2011 8:24 AMHi Niru,
Have you created a
[RFC destination in NW Administrator?|http://help.sap.com/saphelp_nwce10/helpdata/en/5a/97a066223e440b8ead3da027b17d9e/frameset.htm]. Have you created a [BI System connection?|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
Best regards,
Dharmi -
Errror in RFC connection between SCM ABAP stack and JAVA Stack
Hi All
we have installed SCM Abap stack and SCM java stack on same system within single database.when i create rfc connection AI_RUNTIME_JCOSERVER from SCM Java stack to SCM Abap Stack its working fine,but when i am configuring same from SCM Abap to SCM Java using SM59 its giving error.
Error Details Error when opening an RFC connection
Error Details ERROR: failed to open file G:\usr\sap\SCD\DVEBMGS00\data\sideinfo.DAT
Error Details LOCATION: SAP-Gateway on host OPS20SCD1.Octal.pet / sapgw00
Error Details CALL: fopen
Error Details COMPONENT: SAP-GW-LIB (ReadSideInfo)
Error Details COUNTER: 1854
Error Details ERROR NUMBER: 2
Error Details ERROR TEXT: ENOENT: No such file or directory OR: The system cannot find the fi*
Error Details MODULE: gwxxside.c
Error Details LINE: 274
Error Details RETURN CODE: 451
Error Details SUBRC: 0
Error Details RELEASE: 701
Is it compulsory to create RFC connection between abap and java installed on the same system.
plese suggest.
Regardsto configure acceptance of the ABAP (integrated ITS / WebGUI) saplogonticket on the java stack, just log into the java stack (http://FQDN:50xxx/nwa) and select configuration THe last item in the list is Trusted System... click.
on the ensuing page, click on the add trusted system button --> by querying trusted sytem.
Enter the required data on the page:
system type: ABAP
host name: FQDN
System Nr: your instance number
client (of the productive client)
and a username and pw with superuser priveliges in the system (SAP_ALL/SAP_NEW, etc).
the click next
On the final screen, click finish.
You have now SSO setup between the ABAP and Java stacks. To configure SSO to accept java saplogontickets on ABAP see:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b0310d6-0801-0010-3185-b2371a280372
This should resolve your question. -
V.02 use different RFC connection
Hello all,
We have a situation that when a user executes V.02 in R3 and then clicks on an incomplete Sales Document it jumps to the SCM system to do an APO Availability Check. The problem is that it uses a RFC connection with a system user and when you are in the SCM system you've got full access. Is there a way to force V.02 to use a specific RFC connection to jump to SCM so I can set that RFC connection to use current user and log into SCM as the same user that's logged into R3?
Thanks,
Tom> 2.2 Yes, I would like to setup a new RFC connection to SCM and set as a trusted RFC connection with current user but how do I force V.02 to use that specific RFC connection and not one that used for job...extractions..etc that has the system user in it?
There must be config which is calling the RFC function using a destination to the SCM system. Normally I just debug the call and look to see where the rfcdes value is coming from. I have also seen it hardcoded on a few occations using sy-sysid - also a form of config, even if a rather hollow one...
Personally I would try to group them into usage cases, and not necessarily "modules" or anything like that.
> 1. Dont want to restrict the RFC user as it's used for jobs, extractions...etc.
This is a nice example.
Cheers,
Julius
Maybe you are looking for
-
What is the problem with this Xcopy in PostBuild?
I am having the following post-build command in a Visual Studio project: xcopy $(ProjectDir)Data $(OutDir)\ The Data is a directory in the project folder which I want to have copied to bin/debug or bin/release after build completes successfully. I a
-
We are unable to have iPhoto books shipped into Canada because the shipping address field will only accept US zip codes. Any solutions?
-
How to customize HTML5 video keyboard controls ?
> https://support.mozilla.org/en-US/kb/viewing-html5-audio-and-video#w_keyboard-controls Is there a file in the application directory for changing them? I want to change the number of seconds the arrow keys seek by.
-
Adobe Dreamweaver CS3 has shopped working
In the past two days I have been getting the following error message when I try to make changes to an open page in Dreamweaver CS3: "Adobe Dreamweaver CS3 has stopped working" "A problem caused the program to stop working correctly. Windows will clos
-
Uninstall 3.0beta and re-install to a lower build
I have recently upgraded my safari to the 3.0 beta version but one major problem arises - MSN messenger My msn messenger always shuts down itself either because saying it's not available or i wasn't connected to the internet (which was 100% not true)