BI : Technical name of DSO

Hi Experts,
The DSO has a technical name startting with /BIC or /BIO. I am looking for technical name of the DSO 0PUR_O01. I tried searching in SE11 but in vain could not get the desired results. is there any way of getting the technical name of the DSO.
Kindly advise.
thanks & regards,
M.S

table /BIC/A*00 is table holding active data (after activation of request)
table /BIC/A*40 is table holding new data (before activation of request)
there is also a change log table starting with /BIC/B*. you can find the name of this table by going to the manage screen of the dso and displaying the change log...this table holds the delta between the active and the new data and is used to generate the delta to the next layer
in case of a write-optimized dso, you'll only have a table /BIC/A*00 table...no new data or change log table
M.

Similar Messages

Change Technical Name of Info Provider

Hi Experts,
I am in a situation where I have to change the technical name of the DSO. Is it possible? If so, please tell me how to do it.
With Kind Regards,
Kannan

Hi Kannan,
No, you cannot change the technical name of DSO, only the description can be changed.
If your DSO is a new one and the data is not yet loaded. Just delete it and create a new one. But if it is an old one and data is loaded, then you have to backup that data , delete the old DSO and create a new one (You may also create a copy of DSO). Make sure the update rules/Transformation related to your DSO are also checked because it will create issues if your DSO is a source for other targets.
Hope this helps
Regards
Sai

Transport error - Search for technical name

Hi Experts,
I have transported an order from T-System to Q-System without any errors. But from Q to P-System it shows me some errors.
The error protocol gives me some technical names which are not in the system. For example 4E15PO57C6T4LN8Y3EI6W0EA5.
Now I have no idea which object calls 4E15PO57C6T4LN8Y3EI6W0EA5. I can`t search for it or anything else.
How can I identify objects If I have just this id 4E15PO57C6T4LN8Y3EI6W0EA5?
Thank you very much for all answers.

Hi Marian,
If it is a transformation ID, dso etc you can search for the ID in the DEV system by selecting RSA1 and ctrl + F to find. Paste the ID in and search.
If it is a bex object (query, view, variable etc) then you can use table RSZELTDIR from se16 enter then name of the object in ELTUID. This will display the name of the object.
Thanks,
Nick.

How to change in technical name

Hi
BW friends
I have created a process chain on a DSO and i have named it as xyz,but the requirement is to name the chain as xyz daily.is there any process of changing the technical name?
Thank You.

Hi...
1) In RSPC1 give the technical name of the cain..
2) It will open in design mode
3) there where we write tcode...there you write COPY.......
4)Then it will ask for a new technical name for the chain...there you gave a new technical name and copy the same chain..........
5) Save it..........Schedule and activate it.....
Hope this helps you
Regards,
Debjani.........
Edited by: Debjani Mukherjee on Sep 8, 2008 5:33 PM

Field description in chart legend instead of technical name (BW query)?

I am building a report from a BW query. The report has a grouping field and a bar chart in the group footer. When I execute the report the legend shows the technical name of the key figures even though I checked the "Show description" field in the "options".
I can change the labels in "preview" mode (provided I can guess the real names), but just like in the field explorer I would prefer to always have the text instead of the nonsense technical name.
Is this possible?

hello all,
you can use a 2 chart workaround for this.
1) the first chart is the Group chart you already have...just disable the legend
2) now create an Advanced chart using the description field as the On Change Of
3) set the Order of chart to correspond with the technical field that the group is based on
4) preview the chart and right click on the x axis area and format the axis so nothing is showing
5) do the same for the y axis
6) keep right clicking on all of the chart objects and changing them to transparent
sounds annoying, is annoying, but it works.
cheers,
jamie

Find the technical name of a report in Crystal 2008(XI R/3)

Hi,
I know the report technical name(system genetared) is availble at properties tab in CMC in crystal XI R/2, but I am unable to find the same in XI R/3. Also let me know how to create a open document or generate URL for XI R/3 reports.
Thank you,
Regards,
Preetham

Hello Preetham,
I recommend to post the first question to the [BusinessObjects Enterprise Administration|BI Platform; forum.
The URL documenttion for opendocument R3 is [here|http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf]
Best regards,
Falk

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Error while saving Views in Portal - Technical name not valid.

Hi,
When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
Thanks & Regards,
Hari

Dear Harikrishna,
while saving iviews in portal..
it will prompt for some mandetory columns is it.. one is for description..
and the iview name like iv<name of the template>.. this should be without space..
and in the next page u should give technical name of the template as 'template=<name of the template'
in this you should not give any space..finish and save the ivew..
hope this would help you.

In the info cube insted of description need to display technical name

Hi,
I am displaying my info cube contents.But in the field name insted of description i need tehnical name of the filed to dispaly.can you plz anybody suggest me the solution.
thanks
Raj

Hi Raj,
Use T code : LISTCUBE
you get 2 text boxes, Object type : CUBE
Data Target : cube name
Check the option - Technical names. F8
You get all the technical names in the place of descriptions,
hope this is fine
Regards
sreekanth

In the filter the value of text variable is not shown, only technical name.

Hi All,
We have some odd behavior of text variables in the filter screen of key-figures.
After entering values in the variable screen, the report is executed.
Within the report all text variables are filled, with the values entered in the variable screen.
I say all, because we use both sap standard variables &0T_FPER& as customer specific &ZFSCYR&.
When i want to change the key figures showned, i press the filter icon for key-figures (BW 3.5)
In the list shown: existing filtervalues, the textvariables of SAP standard are filled with the value entered in the variable screen. However the customer specific is shown with the technical name (&ZFSCYR&) and not the value.
Has anyone experience with this behavior or even better a solution to prevent this?
As allways, each usefull answer points assigned!
Regards,
René

Hi Rene,
If ur custom text variable is not getting populated then you need to check out the code that u have written in there in CMOD for this and ofcourse if ur using this text variable after report execution then it will definately be in i_step 2.
So best way is to debug your code and check that using code RSRT.
Thanks
Dipika

How can i find technical name of varaibles in query 0T_FYEAR

Hi all,
I am trying to transport my bex objects (query and structures and stuff) from dev to QA.
I had one previous transport from dev to qa and now I have two varaibles 0T_FYEAR and 0P_FYEAR.
And these two varaibles have the earlier reuqest number so I want to delete then from that request and then add to the new request I am trying to create.
But in the old request I dont see these two elements how can i check the technical names for that. I see two different entries in that request which are something like
R3TRELEM2477EPQ40PB73OI4A73SI20IH rest all are starting with 43.....
Can some one help out.
Thanks in advance

Hi Raj,
You can try looking up those IDs in SE16 > V_ELTDIR_TXT to recognise which is which.
Hope this helps...

Technical names in Business Role selection screen

Hello,
When I log on to the WebUI I get the selection screen for the Business Roles (correct because I'm assigned to multiple).
But in the selection screen the Technical Names of the Business Role is hown too and I don't want to show these to the users.
So does anybody know how we can disable showing the technical names in the business role selection screen?
Can it be done in BSP crm_ui_start > Page Fragments > selectBusinessRole.htm Selection of Business Role? If so, what do i have to change?
Thnx!
Regards,
Joost

Hi Joost,
This technical information is the tooltip that is comming from the following line.
crm_ui_start > Page Fragments > selectBusinessRole.htm
at line no 29
tooltip="<%= profile_detail %>"
If you can remove this line then technical information, that comes up when you do mouse over the role description, wouldn't come.
Regards
Ajay

Queries inactive in Production Technical name is not coming After Transport

Hi Folks,
i transported queries with role into production .
There queries are coming without their technical name means b'coze its related data-target was not active but now its active even then queries are not coming with their technical name.
So can we do any manual activation in production or should i go for re-import the same req again into production.
Plz Suggest me

Hi Rajan,
You can do manual activation in production and you can change the technical names of your queries in production.
Thanks and Kind Regards,
Lakshman Kumar Ghattamaneni

How to find the link between strcture and query technical name

Hi Guru's
How to find the link between Strcture in the query and query technical name. In other way where used list of the structure used in queries?
I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
Please can anyone help me?
Regards,
Sirisha

Hi ,
For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
Thanks,
Amit

BI : Technical name of DSO

Similar Messages

Maybe you are looking for