BI to Web connectivity: Query designer's query cannot display in IE

Hi all,
I have configured web connectivity and from SMICM if I type the URL in IE it prompts for user/password and connects to BI, however, from query designer if a query is published on web the URL will point towards standard sap.com at port 50100 and IE will display a broken link message.
After a bit of research I discovered that httpplugin.dll is missing from /usr/sap/sys/exe and there is no folder under /exe where the httpplugin.dll is expected to be.
Any suggestion, please.
Thanks.

Below is the URL that IE points to:
http://portal-dmb.wdf.sap.corp:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=EX4_TBW20&VARIABLE_SCREEN=X&DUMMY=1
Thanks.

Similar Messages

IE browser and Web Cache and SSL - Internet Explorer cannot display the web page

When using IE8, IE9, or IE10 with Web Cache and SSL certain pages which display a lot of data returns the error - "Internet Explorer cannot display the web page."
if we eliminate SSL but continue to use Web Cache, the error does *not* reproduce & If we eliminate Web Cache altogether the error again does *not* reproduce. The error is only reproducible when we use SSL with Web Cache and if we use IE and we access *large* pages. The error is not reproducible with Firefox or Chrome. This is a Web Tier 11.1.1.7 installation with WebLogic 10.3.6 & Red Hat Enterprise 5 Linux x86-64
Event_log shows below errors.
[2013-06-13T16:34:35-04:00] [webcache] [NOTIFICATION:1] [WXE-09002] [logging] [ecid: ] Generated by Oracle Web Cache on Thu Jun 13 16:34:35 2013 - Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-08513] [logging] [ecid: ] Cache server process ID 4469 is starting up.
[2013-06-13T16:34:36-04:00] [webcache] [NOTIFICATION:1] [WXE-09612] [main] [ecid: ] Oracle Web Cache 11g (11.1.1.6), Build 11.1.1.7.0 130113.0721
[2013-06-13T16:34:37-04:00] [webcache] [NOTIFICATION:1] [WXE-13002] [config] [ecid: ] Maximum allowed incoming connections are 1000
[2013-06-13T16:35:00-04:00] [webcache] [NOTIFICATION:1] [WXE-09441] [stats] [ecid: ] DMS enabled
[2013-06-13T16:35:28-04:00] [webcache] [NOTIFICATION:1] [WXE-12209] [cluster] [ecid: ] A 1 node cluster successfully initialized
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_static_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_static_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09614] [main] [ecid: ] [[
The following Oracle Web Cache internal files are pre-populated to the cache: [[
        /nssb-p.adm.fit.edu:7785/_oracle_http_server_webcache_checkserviceavailability_.html
        /nssb-p.adm.fit.edu:4448/_oracle_http_server_webcache_checkserviceavailability_.html
[2013-06-13T16:35:29-04:00] [webcache] [NOTIFICATION:1] [WXE-09608] [main] [ecid: ] The cache server process started successfully.
[2013-06-13T16:35:29-04:00] [webcache] [WARNING:1] [WXE-12104] [utl] [ecid: ] Oracle Web Cache process has page faulted
[2013-06-13T16:44:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55145
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:22-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55144
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:27-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-29049
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: The record type is unknown.
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Remote IP [163.118.22.16]:55148
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: Local IP 163.118.170.70:4448
[2013-06-13T16:44:27-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: SSL error during handshake (details: internal=The record type is unknown. system=Success)
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:35-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:44:47-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:18-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:22-04:00] [webcache] [ERROR:32] [WXE-11904] [security] [ecid: ] SSL handshake fails SSL-28864
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:38-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11905] [security] [ecid: ] SSL additional information: This error occurred because the peer closed the connection.
[2013-06-13T16:45:41-04:00] [webcache] [WARNING:1] [WXE-11906] [security] [ecid: ] SSL details: success during initialization (details: internal=success system=Success)
Any help or suggestions are greatly appreciated
Tnx a lot,
Lokesh

Hello ,
Try Below Workarounds:
Workaround 1:
Open Central Admin
àApplication Management à
Configure Alternate access mapping-->Edit your web application zone and add your server name in Intranet zone. So default can be serverIP and intranet could be servername.
Workaround 2:
Might be there is some issue with DNS and try to check that WebApplication is pointing to correct IP or not.
Also try to access your Sharepoint site using ip Address .. If you still gets error Kindly share the logs ..
Best
Regards Kuldeep Verma
Please remember to click "Mark As Answer"
if a post solves your problem or "Vote As Helpful" if it was useful.

Web Dynpro-layout preview-Error-IE cannot display-service in SICF activated

Hello,
By starting a view in web dynpro framework, i have the error in tab layout "page cannot be displayed" from IE.
Before i make the change in the DNS and system32/../etc, the layout was displayed, but the web dynpro application cannot be started.
Now after those configurations and activation of services in SICF, i can start the web application only with firefox and not internet exploer, and, that internet explorer is preconfigured for the layout preview, i recieve all times the eror "cannot display" when i start a view in the layout tab.
1. How can i change settings so that view can be displayed in layout after i actived the (hope the suitables i.e. view designer) services in SICF - Default_host...
2. Is it possible to change IE to firefox as main browser for layout tab.
Note: For virtual domain i
1. add dns "domain.com" in the DNS
2. add in system32/etc/host file to "127.0.0.1 localhost", "10.10.0.10 sysserv.domain.com"
3. and trough tr. rz10 in the instance profil input the icm/.... ....domain.com
Through this three steps i could get the web dynpro application started,
but from the other side, the layout preview do not display the view again
and just send error the message: "THIS PROGRAM CANNOT DISPLAY THE WEBPAGE"
Many thanks for helping
arnaud
Edited by: Arnaud on Jul 15, 2010 4:36 PM
Edited by: Arnaud on Jul 15, 2010 8:31 PM

Hi,
The string is not correctly formed ( a quote and a concatenation ) :
Your url :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port||')||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
The Correction :
v_url:=nvl(v_rep_port,'http://'||v_rep_HOST ||':'||v_rep_port)||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||v_rep_svr;
Hope it helps
Mohamed Dadi

Problem with the icon "Display query on the web" in Query Designer

Hi Friends,
         I was told by my PM to give them all FI Modules standard business contenet reports, so for that reason i have installed all FI business content & loaded the data in the Dev Server, now i just want to show the reports, but i want excute these reports in Internet Explorer using the Icon "Display Query on the WEB" in query designer, when i click on that it isn't getting displayed in the browser.
         the URL coming like this, "http://itcchqbd:8100/sap/bw/BEx?sap-language=EN&bsplanguage=EN&CMD=LDOC&INFOCUBE=0FIAA_C11&QUERY=0FIAA_C11_Q0001&VARIABLE_SCREEN=X&DUMMY=1"
getting the message in the page, the page can't be displayed,
          How to solve this problem & how do i have to show the standard business content reports to all FI Superiors ?
awaiting for ur answers
Regards,
Balaji

Balaji,
first check if you have enabled web reporting on your BW server ( there is a how to paper for the same )
another way to check out the same is to find out if there are existing web templates being published which would make the server web ready.
As for FI content - activate the FI relevant areas in Business content and then activate the respective datasources and then load the data.. or go trough the best practices for BW-FI ( service.sap.com/bestpractices) wnd then activate the best practices for the same.
Hope it helps.
Arun
Assign points if useful

Display query on Web from Query Designer in BI 7.0

Hi,
I am trying to see my report in the web like how I do in BW 3.5.
The sytem taking me to the Browser. But the page is not displayed. The normal cannot display HTML page.
I think I need to configure BEx broadcaster for this.
Can anyone help me on how to solve this problem? with the TCODES etc.,
Thanks,
Praveen

Hi,
You need to enable the web functionality, check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
It's a how to.
If you need further help, just ask!
Hope this helps.
Regards,
Diego

Using Portal Variables in filter criteria of BEx Web App query string

Our BI 7 instance is connected to a NW2004 portal, where we have created SAP BW Report iViews to access templates created with the Web Application Designer. We would like to use some of the portal variables about the user to create filters for the BEx Web Application Query String.
The query string would have a set of parameters at the end that looks something like:
&FILTER_IOBJNM_1=0PLANT&FILTER_VALUE_1=<plant>
Where <plant> is a value stored in a portal variable.
Is it possible to do this in the SAP BW Report iView or will we have to code our own custom iView to pick up the variable values?
Cheers,
Lee Smith

Any one?

Can a web service query a database at set intervals?

Can someone verify if this is feasible?
I need to display live data via browsers . I would like to have the query to the database executed server side and have the web service provide the data to the browsers.
Here is what I propose :
I would like to have a web service run on a web server for an intranet.
Have the web service query a database every 20 seconds and update the data into a table or an array variable.
On the browser side I want the browser to refresh every 20 seconds with the updated data from the web service.
Any other recommendations would be greatly appreciated.
Thank you.
Chris W.

Hi ChrisTW1,
Thank you for posting in MSDN forum.
Based on your issue, I suggest you can try to use the JS to call the web service to set the intervals. For more information about how to use the JS to call the web service to set the intervals, please see:
http://www.codeproject.com/Tips/647322/Calling-ASP-NET-Webservice-using-JavaScript-on-Reg
In addition, since
this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor. If you have any issues about the set the
intervals for the web service, I suggest you can post this issue directly to the WCF forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=wcf, maybe
you will get more help.
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to do a web tabke query in Numbers 09

Is there a way to import a table from a website and link the table so the data can be updated? This is a function built into Excel "Import web query".
Thanks!

Those who took time to look at the _iWork Formulas and Functions User Guide_ (from the very hidden Help menu) are aware of the function:
HYPERLINK
The HYPERLINK function creates a clickable link that opens a webpage or new email
message.
HYPERLINK(url, link-text)
• url: A standard universal resource locator. url is a string value that should contain a
properly formatted universal resource locator string.
• link-text: An optional value that specifies the text that appears as a clickable link in
the cell. link-text is a string value. If omitted, url is used as the link-text.
If the linked Web Page is designed to send datas, we may grab them in Numbers.
A sample was posted here some times ago.
Look at:
http://discussions.apple.com/thread.jspa?messageID=9021458
Yvan KOENIG (from FRANCE mardi 14 avril 2009 21:56:39)

CR 4 Ent, Xcelsius and WebI - one query and two different results

Dear Sirs,
I'm using BO 4.0 platform and 3 tools: Crystal Reports for Enterprise, WebI and Dashboard Design (Xcelsius).
I have one question, because in my opinion in this solution is one inconsistency.
I have one table in SQL Server (like below):
IDRec (autoinc) | Col1 (varchar)   | Col2 (int)
1      A    1
2      A    1
3      B    2
4      B    2
I have one universe with ONLY 3 dimensions (IDRec, Col1, Col2). I haven't any measures.
And:
1. Using CR 4 Ent and I create report using 3 dimensions (IDRec, Col1, Col2).
I make sure, that I selected option: "Retrieve duplicate rows"
If I have 3 columns in details I have 4 records (4 rows) in my report, when I have 2 columns (Col1 Col2) I have only 2 records (2 rows) in report (Page view).
So universe (or something like this) use option DISTICT (I think).
2. When I use WebI (14.0.2) I have the same situation.
3. When I use Dashboard Desigm (Xcelsius 2011) I have 4 rows !!! ALWAYS - it doesn't matter I selected "Retrieve duplicate rows" or not !!!
When I look to "View script" window, I not see DISTINCT clause.
Am I doing something wrong?
I can change the settings so as to be able to see duplicate records?
It's very important for some calculation, especially in Crystal Reports (for Enterprise).

Hi,
Thanks for the response...But the result is deviating from the expected..
       expected is
     if we have first query returns              second query returns
              1                                                     4
              2                                                     5
              3                                                     6
     these two queries result should be in one table , with first query result in first column and second query result in second column.
   The two queries fetching data from same table(category table as in my post) with different search criteria( in where clause).......Regards,
Rakesh.

Query not displaying data if i launch in web.

HI,
i have created one query.
If i open the same in Bex Analyser i am getting data.(dispalying data).
If i launch the same query through web its not dispalying data.error message as no data available.
Please tell me wat may be the reason.
thanks & regards,
KPS Moorthy

if you see the result in Bex, then you should see the same result in web also unless you are giving any variables value values executing on web.
I hope you are executing query on web using query designer.
Regards
Pankaj

PeopleSoft Connected Query in XML Publisher Report - Error

Hello - I'm getting this weird error when trying to run an XML Publisher report off a PeopleSoft Connected Query. The Connected Query runs fine to an XML File. Any ideas? The parent/child queries in the connected query don't use any prompts.
PCodeWTL(1/3): Prompt Field Name is invalid because it exceeds the maximum allowed size of %1 (50,493)

We encounter the same problem. Did you get the answer for this issue? Thanks in advance.

XML publisher report using connected query

dear all,
I defined some XMLP reports with very similiar parameters.
I found a strange issue, all reports using query as the source, they appear in the XMLP report viewer.
But for those using the connected query, all are not able to be found in the XMLP report viewer list.
Anybody has experience on this. Did I miss anything special for the connected query type?
Many thanks.

Is there anybody suffering the same issue?
I double checked the settings of two XMLP report definitions.
No difference, but the one with the connected query as the source can NOT been found.

Unable to edit Web Intelligence query

We have a Web Intelligence report with multiple queries based on what I believe to be local data sources (text files/excel). The problem that we are having is that we need to make modifications to the report's queries but when we go to edit them we get a message saying "This query cannot be edited". I believe this is happening because "Editable" was deselected in the query properties but cannot be certain.
The report was created by a contractor who has recently left the company and no longer available to make updates. Is there any way to get back in to edit the query? Is there something else that may be causing the query to not be editable?

As John said that it is a permission issue. I had same case like that and I resolved my problem with following below steps ( It will be best to logging in as an Administrator account to CMC)
CMC-> Access Level -> Included Rights -> Application -> Web Intelligence -> Desktop Interface - enable local data providers
Hope this helps, who are searching same case.

Running Connected Query with Run Control Parameters using App Engine

Hello,
I created a connected query that has 1 parent query and 1 child query, and use this as DataSource for the report that I am going to generate. I created an app engine that willl be called to generate this report. However, I encounter the error "Error occurred while processing the request. (228,101) PT_CONQRS.CONQRSMGR.OnExecute Name:GetXMLData PCPC:59072 Statement:1309". What could be causing this issue? One cause I am thinking is that the Connected Query not returning any data since I am not able to pass / map the values to the CQ's prompt fields. How is this done in CQ? I've done it in PS Query by using the function SetPSQueryPromptRecord+. I'm trying to search for this function's equivalent in CQ. I was able to search for a workaround (http://mfinchps.blogspot.com/2011/05/how-to-launch-connected-query-xml.html), but I still prefer to have a CQ data source.
Below is the code that should handle mapping of CQ prompt fields:
&oConQrsInst = create PT_CONQRS:CONQRSMGR(&OperId, &ReportName);
&result = &oConQrsInst.Open(&oConQrsInst.Const.InitExisting);
&CQPromptsArray = &oConQrsInst.QueriesPromptsArray;
&rcdQryRunParms = CreateRecord(@&PromptRec);
&sqlSelectQryParms = CreateSQL("%Selectall(:1) WHERE OPRID = :2 AND RUN_CNTL_ID = :3");
&sqlSelectQryParms.Execute(&rcdQryRunParms, &OperId, &RunControlId);
/*Loop through the Connected Query "Queries" and fill in each query's prompts as needed*/
For &arrCtr = 1 To &CQPromptsArray.Len
&rcdQryPrompts = &CQPromptsArray.Get(&arrCtr).QueryPromptRecord;
For &i = 1 To &rcdQryPrompts.FieldCount
While &sqlSelectQryParms.Fetch(&rcdQryRunParms)
If &rcdQryPrompts.GetField(&i).Name = &rcdQryRunParms.GetField(Field.BNDNAME).Value Then
&rcdQryPrompts.GetField(&i).Value = &rcdQryRunParms.GetField(Field.BNDVALUE).Value;
Break;
End-If;
End-While;
End-For;
&sqlSelectQryParms.Close();
End-For;
rem &oRptDefn.SetPSQueryPromptRecord(&rcdQryPrompts); -> need to have equivalent of this+
&oConQrsInst.Close();
Thanks!
Janet

i think you have run the code to generate the XML file from your connected query...
check the following things
1. Check the Report definition is defined or not for the file that you want generate.
2. if its defined check the RTF template is present or not.
3.Check your code in Appengine whether you have mentioned the Report Definition and template name,

Transport Web Template, Query from development to productive system

Hi!
How can I transport Web Template, Query, workbooks from development to productive system?

RSA1 ---> Transport Coonection ---> Object Types -
> Select Web Tempelate ---> Drag to right and group under transport
Similary do for other objects
Thanks
Amit

BI to Web connectivity: Query designer's query cannot display in IE

Similar Messages

Maybe you are looking for