BI transfer rules missing .
Dear all,
we had made a system copy of the source system (ECC) and with BI (Scm) system i.e both the systems on Quality was refreshed with prod , now we get the error that transfer rules does not exist on the copied BI system .
Could any one help
Regards
kumar
Hi,
See the following SAP Notes:
SAP Note 886102 - System Landscape Copy for SAP NetWeaver BW
SAP Note 325470 - Activities after client copy in BW source systems
SAP Note 325525 - Copying and renaming systems in a BW environment
SAP Note 1333302 - Special procedure for BW system copy
SAP Note 996238 - Dump 'RFC connection error' after BW system copy
SAP Note 184754 - Procedure after BW database copy
SAP Note 184322 - Procedure after DB copy of BW source systems
SAP Note 538052 - Maintenance of Myself destination in BW
Search for PDF in SDN
How Tou2026System Copy in SAP Business Intelligence System Landscapes
Need to activate the objects and then transport.
Thanks
Reddy
Similar Messages
-
Content for 0REFX_3 transfer rules missing.
Hi folks
We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
Inorder to get that we have implemented SAP note
BW transfer rules missing in delivery
SAP Note Number: 1246385
And we installed BI_CONT 704 SAPK-70401INBICONT New support pack for BI content.
It leads to weird changes in the system like previously available objects in BI content are missing.
Did any body encountered same problem.Hi,
We are having the same problem - no transfer rules for 0REFX_C03.
Currently on BI_CONT 735 Level 003.
Did this problem get resolved?
Any help greatly appreciated. -
Transfer Rules missing in Business Content (704 lvl 1) for CMS
Hi SDN,
We are currently on BI 7.0, and using Business Content 704 level 1. When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
Has anyone encountered this issue? I have been referencing notes 1171293, and 1179880
Thanks,
Brendonhi,
If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
Regards,
Shiva. -
RSAU_READ_MASTER_DATA in transfer rules missing results or dump
Hi Guys,
Anybody know about if the RSAU_READ_MASTER_DATA work in transfer rules??
I have a routine for field attribute derivation from a infobject; putting the trans-structure as I_CHAVL and returning the E_ATTRVAL in result. But don't work and is hiring a dump of CALL_FUNCTION_CONFLICT_TYPE.
I tested with I_CHAVL equal to a string that is the key of a field in the infobject that I want to read; i haven´t the dump but don't work. The value is blank.
The code is the next:
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
EXPORTING
I_IOBJNM = 'KSTATSDSK'
I_CHAVL = TRAN_STRUCTURE-KSTATSDSK
I_T_CHAVL =
I_DATE =
I_FLG_WHOLE_TABLE =
I_ATTRNM = 'KGRALSTA'
IMPORTING
E_STRUCTURE =
E_TABLE =
E_ATTRVAL = RESULT
EXCEPTIONS
READ_ERROR = 1
NO_SUCH_ATTRIBUTE = 2
WRONG_IMPORT_PARAMETERS = 3
CHAVL_NOT_FOUND = 4
OTHERS = 5.
Please, help me to see the error, if exist, or help me with other method for do this master data attribute read.
Thank you.Hi Jeysi,
What's ur purpose here ??
If u're gonna read some data in master data, instead of using function, why don't u directly select to master data table ???
Usually the table name is /BIC/PX
X: Master data name.
/BIC/ => Customized one.
But if you want to get the information regarding what the table is, you can open directly respective master data info-object, and you go to master data tab.
In over there, you'll see the box whose label is Master data tab.
You can use SELECT command in ur corresponding transfer/update rules..
SELECT *
FROM ..
INTO CORRESPONDING FIELD OF TABLE ..
WHERE ..
Hopefully it can help you a lot.
Regards,
Niel. -
Transfer rules missing!!!
Hi,
i can not see any tranfer rules in BI content . i have Bi -content 9 and Bw SP15 patch levels.
any suggestions?
regards,
prasadno am not done any migration of Ds till now,,
m donethe following steps..
1. Rsa5 -DS (3.x)activation ..(master n transaction)
2. replicated in Bi side .
3. installed the 0SD_C03 cube with "dat flow before " and "Automatic collection"
4.while tring to load master data for TEXTS 0BILBLK_ITM ..In Transfer structure it's not proposing the KEy1 field ..if i tries to map manually ..then loading ..it's giivng erroe where as in r3 records are avaialble (RSA3)..
is there any issue with BW SP15 and BI content 9 combination...
please suggegst.
regards -
Missing Transfer Rules in Selection Window for Transport
Hello,
Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window? I am using BW 3.5.
Problem details:
I want to transport a transfer rule from a DEV box to a QA box. In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel. The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included.
I also noticed that this appears to be a "funny" problem. One other computer connected to BW shows the correct listing while still another shows a different listing. Has this got to do with any setting?
Please help.
WernelHi Wernel,
Its better to activate ur transfer rules once again. Also this Z* TRs would be displayed in last row of the Pop up window in the select Objects list.
or select them by grouping as before dataflow by selecting InfoSoruce.
Assign points if it helps...
Regards,
ARK -
Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1
Hi,
I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
We are at BI Cont 7.03, patch 8.
There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
Does anyone have a solution for this?
Thanks!
KathleenHi Kathleen Cooke ,
I am having similar issue now, can you please let me know if you know the solution for the below problem..
I am trying to activate the Business Content for BW Statistics, but the datasource and the Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
I am on
BI_CONT 703, level 0005, Support Package SAPKIBIIP5
SAP_BW 700, level 0012, Support Package SAPKW70012
Thank You,
Varun. -
0Gender Transfer Rules for its Text Datasource Missing
Dear Experts,
While checking 0Gender infoobject, I do not see any transfer rules connected to the 0Gender_Text Datasource?
Within the 0Gender Display in RSD1, I see text data loaded into /BI0/TGENDER table.
In the Business content activation under any grouping too no transfer rules are present.
I am on BI 7SP17 and BI Cont 703 SP6.
Can anyone please help.
Thanks,
Raj JainHi Raj Jain,
Try the below SAP Note...
SAP Note Number: 329874:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d333239383734%7d
Hope this helps u...
Regards,
KK. -
Transfer rules are missing for selected source system in BI content
Hi All!
The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
Regards, Iryna.Hi Rathy!
Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
What you can advise?
Reagrds, Iryna. -
ROCANCEL field is missing in Transfer Rules.
Hi Bw Experts,
i have created the datasource and enabled the delta. I have replicated the datasource.I have created the Custom ODS.When i am creating the transfer rules, ROCANCEL field is not displaying.I couldnt able to map for RECORDMODE Info Object.
Can u pls help on this issue.
Thanks,
Jelina.Hi,
making a field delta enabled will not make the ROCANCEL filed included in the data source.
Its provided by SAP for the standard extractor to track the cancelled records and changes and there is logic written in the SAP programs to populate it.
If you create a generic data source it will bring the changes based on the date which you have given.
If the record is cancelled or deleted then you should include the indicator from the underlying table which shows the records as deleted and make it part of the data source.
You can then map that too 0RECORMODE.
Thanks
Ajeet -
2LIS_02_SCL Transfer Rules are missing
Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?
Juan Orozco wrote:
I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
Case A. RS_TRANSTRU_ACTIVATE_ALL
Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
Edited by: Arun Bala G on Feb 16, 2012 9:29 PM -
R/3 DataSource field missing in Transfer Rules
Hello Everyone,
I am working with R/3 Datasource 0ASSET_AFAB_ATTR. I enhanced the structure by adding a new field 'VYEAR'. After generating the Datasource in R/3, i replicated the datasources on the BW Application Component. But, i cannot see the appended field 'VYEAR'in the Transfer Rules. The field is not hidden and I can see the field getting populated in RSA3 for that datasource. Could someone help.
ThanksHi Sachin,
In the InfoSource Maintenance screen expand the node for transfer structur/transfer rules and click on the tab datasource/transfer structure and scroll down to find your field.
Cheers,
Sree -
0CA_TS_IS_2 Transfer rules is missing
Hello All,
I tried to install transfer rules for 0CA_TS_IS_2, But couldn't able to get I can install update rules and InfoCube 0CATS_C02,
I also tried to install transformation but not able to find, Do i need to create Tansformation or Transfer rules Manually, If yes.. Then is there and routine or master data read in between, Pl. help me to complete this flow.
Thanks.
shalini SinghIn that transformation (Datasource --> InfoSource) all fields have 1 to 1 mapping.
In transformation btn InfoSource --> infoCube
0CALDAY (from infosource) is mapped to all time characteristics (calday, month, month2, quart1, quarter, year, week) in infocube.
Some fields (Emplgrp, emplsgrp, pern area, pern subarea, 0CO_MST_AR, 0MAST_CCTR, person, orgunit) are master data read from 0EMPLOYEE.
And remaining fields have 1 to 1 mapping. -
Error in creating transfer rules beween infosource and datasource in BI 7.0
Hello Guys
I am gettting the following error when trying to create transfer rules between infosource and datasource.
1. Error while activating transformation
2. Deletion of Objects with Type Transformation
3. Preprocessing/Collecting DDIC Objects for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
4. Post Processing/Checking the Deletion for Transfor mation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
5. Object Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K has been deleted
6. Name of object of type 'TRCS' is missing
7. Name of object of type 'TRCS' is missing
8.Key rule 1 (target field: 0COMP_CODE): Initial update set
9. Key rule 2 (target field: 0PLANT): Initial update set
10. Key rule 3 (target field: 0OI_EBELN): Initial update set
11. Key rule 4 (target field: 0AC_DOC_NO): Initial update set
12. No rule exists
13. Saving Objects with Type Transformation
14. Saving Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
15. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K saved successfully
16. Activation of Objects with Type Transformation
17. Saving Objects with Type Transformation
18. Internal Activation (Transformation )
19. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
20. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
21. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
22. Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 1,644 (-> long text)
23. Error during generation
24. Error when activating Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
25. Resetting of Incorrect Objects Back to the Active Version (Transformation )
26. Preprocessing / Creation of DDIC Objects for Trans formation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
27. Post Processing/Checking the Activation for Transf ormation 094TBEAT814OF89GQXFOFI0DX7ATMS4K
28. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was activated
29. Transformation 094TBEAT814OF89GQXFOFI0DX7ATMS4K was reset to the active version
Can anyone send me a document on how to create cubes, info and data sources,ODS's,multicubes and t/f and update rules in BI 7.0
Thanks.Transformations in BI7
http://help.sap.com/saphelp_nw04s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Regards,
R.Ravi -
BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC
Hello Experts,
when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
/CRMBW/OPPORTUNITY_I (all Business Content Objects) Iam facing the following situation:
1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
2. When I use "Installation" i get a dump of the following type:
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Except. CX_SY_OPEN_SQL_DB
Error in the ABAP Application Program
The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
terminated because it had come across a statement that unfortunately cannot be executed.
More details of the dump are:
Trigger Location of Exception
Program CL_RSAR_FORMULAS==============CP
Include CL_RSAR_FORMULAS==============CM00E
Row 40
Module type (METHOD)
Module Name GENERATE_ACTIVE_VERSION
The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
Can anybody help me?
Greetings from Barcelona
Oliver
Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PMHi Oliver,
Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
Best Regards,
Des
Maybe you are looking for
-
Is this a bug in Java, or am I doing something wrong?
I have a Vector which I want to convert to an array, so I wrote my code something like this: MyObject a = new MyObject("A"); MyObject b = new MyObject("B"); MyObject c = new MyObject("C"); MyObject d = new MyObject("D"); Vector v = new Vector(); v.ad
-
I want to load a file that consists of the coordinates of some shapes like POLYHEDRON and its coordinates of vertices and faccets, shere .the central point and its radius. As you can sense the file is in a text format. So can the file's information t
-
Hey there, How come any time I use the drawing API in AS3, or FXG in MXML, certain Paths or shapes, do NOT look crisp. They are clearly blurred on some of their edges. Straight Rect shapes do not have this problem, but when drawing a custom shape, th
-
Gyroscope stop working after updade to 4.3.2!!
Hi everybody! i have an iPod touch 4G 32gb since february of this year and when update From 4.2.1 to 4.3.2, the gyroscope has stop working at all, it say 0 degrees on all apps that measuring the gyro movement, i was tried Many apps... With the same
-
Renaming issues of Database.
Hi All, We had replication set up for a database, which we removed few days back and now we want to rename the database, when I tried with USE master; GO ALTER DATABASE abc Modify Name = zabc GO, which is throwing an error as Msg 18855, Level 11,